|
|
|
DVD Burners Stoped Working
|
|
Junior Member
|
25. May 2007 @ 16:04 |
Link to this message
|
Ok so here is my problem.
Im using a laptop and trying to burn a DVD but i cant. I am also using an external Lite-ON DVDRW SOHW-812S DVD Burner.
Usually when I insert a disk in my drive Nero picks it up and chooses a speed for me, but now it dosent.
I found out when this happens, when I try to burn the disk It says that its burning but at the very end it stops and says burn failed. when I try to burn with My laptops burner I get this Log from Nero.
2:44:17 AM #19 CDR -1135 File Writer.cpp, Line 302
Write error
D: HL-DT-ST DVD+RW GCA-4040N
2:44:17 AM #20 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
2:44:17 AM #21 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
2:44:17 AM #22 Phase 127 File dlgbrnst.cpp, Line 1725
Generating DVD high compatibility borders
2:44:17 AM #23 Phase 129 File dlgbrnst.cpp, Line 1725
Generating DVD borders completed successfully
2:44:18 AM #24 Phase 38 File dlgbrnst.cpp, Line 1725
Burn process failed at 4x (5,540 KB/s)
Ive had this problem like a week ago but when i restarted my computer all worked fine, but now no luck with that.
I THINK I have the latest firmware.
I also tried using IMG-Burn but i get the same results.
I also installed ASPI and Nero Info-tool says that they are fine.
I dont know what else to do.
So I came here to AD because you guys never let me down. :)
Any help???
EDIT: Also when thins happens Windows dosent shutdown properly. It get stuck on the "Windows is Shuting Down" screen and I need to power down manually.
Silo
This message has been edited since posting. Last time this message was edited on 25. May 2007 @ 16:07
|
|
Advertisement
|
|
|
|
|
Sickley
Member
|
25. May 2007 @ 20:56 |
Link to this message
|
|
first try the usuals:
shutdown all programs (EVEN ANTI VIRUS!!!)
burn at a slower speed
also check what media you are using (http://www.afterdawn.com/software/video_software/dvd_tools/dvd_identifier.cfm)
after that get back with us with the details :)
|
Junior Member
|
26. May 2007 @ 02:38 |
Link to this message
|
Ok so here is what I did:
I shut down all programs and and tried it. Didn't work.
Ran CCleaner did a restart and tried it again. Didn't work.
Was trying to burn a 2X.
Im using good disks Verbatim DVD+R w/AZO+
If i remember correctly the Burner on my laptop always gave me problems even with IMG-Burn before I had THIS problem it would show that it was trying to write to disk but couldn't, and then would stop after to many retrys. But my laptop burner is a piece of $*it so i dont care about it that much. It more of my external one that I care about.
Anyways did what was asked and still didn't work.
Any other suggestions???
UPDATE
When I open MY Computer it shows the drive as a DVD-RW Drive, but when I insert a Blank DVD disk all the sudden it changes to a CD-Rom Drive.
And Just to check I ran Nero and when It asked for a disk, I inserted a non-blank DVD and what do you Nero detected it and locked on the correct Speed as usual, buy then I inserted a blank DVD and it went back to being broken.
Could it be that the drives are corrupted. I also installed the a Firmware that makes it Region Free also just a couple of days ago.
I wont be watching any movies tonight Will I?
Silo
This message has been edited since posting. Last time this message was edited on 26. May 2007 @ 07:33
|
|
ddp
Moderator
|
26. May 2007 @ 07:51 |
Link to this message
|
|
moved to correct forum. try the external burner on another pc to see if does same thing or not.
|
Junior Member
|
26. May 2007 @ 08:03 |
Link to this message
|
|
I dont have another Computer to try the drive on.
I searched some more and decided to install DVD Identifier and I got this.
[18:53:20] DVD+R/+RW Medium Detected. Starting Identification...
[18:53:20] ** Initiating ADIP Retrieval Method 1 (Original ADIP)
[18:53:20] ERROR : ADIP Read M1 Failed : Illegal request - Invalid field in CDB [05/24/00]
[18:53:20] INFO : ADIP Read Method 1 Not Supported ; Method 2 Will Be Attempted
[18:53:20] ** Initiating ADIP Retrieval Method 2 (Copy Of ADIP)
[18:53:20] ADIP Read Method 2 Completed Without Errors
[18:53:20] Disc Identification Completed Successfully
and it says that it was manufactured by Mitsubishi Chemical Corp. which I found is in relations with Verbatim So I think Im good there.
I dont know what else to do...
Silo
This message has been edited since posting. Last time this message was edited on 26. May 2007 @ 08:11
|
Junior Member
|
26. May 2007 @ 11:08 |
Link to this message
|
I decided to add a full log just to give you guys some incite.
This is what I get when I try to burn from my laptops Burner.
As said before with the lite-on in got into a loop and I have to stop it manually.
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 9/10/1999 12:06:00 PM
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 PM
NT-SPTI used
Nero Version: 7.0.1.2
Internal Version: 7, 0, 1, 2
(Nero Express)
Recorder: <HL-DT-ST DVD+RW GCA-4040N>Version: 1.15 - HA 1 TA 3 - 7.0.1.2
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <HL-DT-ST DVD+RW GCA-4040N>Version: 1.15 - HA 1 TA 3 - 7.0.1.2
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : TOSHIBA MK8025GAS atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVD+RW GCA-4040N atapi Port 0 ID 1 DMA: On
=== CDRom-Device-Map ===
HL-DT-ST DVD+RW GCA-4040N D: CDRom3
LITE-ON DVDRW SOHW-812S E: CDRom5
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 510MB (522732kB)
Free physical memory: 58MB (59688kB)
Memory in use : 88 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
26.5.2007
Burn DVD Image
10:04:22 PM #1 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 72704KB of Memory
10:04:22 PM #2 Text 0 File Reader.cpp, Line 124
Reader running
10:04:22 PM #3 Text 0 File Writer.cpp, Line 113
Writer D: HL-DT-ST DVD+RW GCA-4040N running
10:04:22 PM #4 Text 0 File Burncd.cpp, Line 3302
Turn on Disc-At-Once, using DVD media
10:04:22 PM #5 Text 0 File DlgWaitCD.cpp, Line 279
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 1429301 (317:37.26, 2791MB)
10:04:22 PM #6 Text 0 File DlgWaitCD.cpp, Line 291
Write in overburning mode: NO (enabled: CD DVD)
10:04:22 PM #7 Text 0 File DlgWaitCD.cpp, Line 2578
Recorder: HL-DT-ST DVD+RW GCA-4040N, Media type: DVD+R
Disc Manufacturer ID: MCC, Media Type ID: 004, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 7
10:04:22 PM #8 Text 0 File DlgWaitCD.cpp, Line 458
>>> Protocol of DlgWaitCD activities: <<<
=========================================
10:04:22 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 1429302 (1429302) = #1429302/317:37.27
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1429302 blocks [D: HL-DT-ST DVD+RW GCA-4040N]
--------------------------------------------------------------
10:04:22 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [D: HL-DT-ST DVD+RW GCA-4040N] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 2927210496, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1429302 | lead-out | 1 | 0x41 | 0x00
10:04:22 PM #11 Text 0 File SCSIPassThrough.cpp, Line 36
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
10:04:22 PM #12 Phase 36 File dlgbrnst.cpp, Line 1725
Burn process started at 4x (5,540 KB/s)
10:04:22 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
10:04:22 PM #14 Text 0 File Cdrdrv.cpp, Line 8411
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 7 h
Disc Manufacturer ID: MCC.....
Media type ID: 004
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 07 4D 43 43 00 00 - 00 00 00 30 30 34 00 38 ...MCC.....004.8
23 54 37 12 02 54 6C 02 - 92 5F 15 15 0B 0B 08 08 #T7..Tl.._......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................
10:04:22 PM #15 SPTI -1 File SCSIPassThrough.cpp, Line 323
D: CdRom3: SCSIStatus(x02) WinError(0) NeroError(-1)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x14
Sense Qual: 0x00
CDB Data: 0xFC 00 2B 52 54 42 00 00 04 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0E 00 00 00 00 14
Buffer x0400b800: Len x4
0x00 00 00 00
10:04:22 PM #16 Text 0 File DVDR.cpp, Line 5400
Drive: HL-DT-ST DVD+RW GCA-4040N
Book Type request [LG]: DVD-ROM
Changing the Book Type was finished with error, return code -1
10:04:22 PM #17 Text 0 File DVDPlusRW.cpp, Line 666
Start write address at LBA 0
DVD high compatibility mode: Yes
10:04:33 PM #18 SPTI -1135 File SCSIPassThrough.cpp, Line 323
D: CdRom3: SCSIStatus(x02) WinError(0) NeroError(-1135)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x80
CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 0E 00 00 00 00 0C 80
Buffer x0ac60000: Len x10000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
10:04:33 PM #19 CDR -1135 File Writer.cpp, Line 302
Write error
D: HL-DT-ST DVD+RW GCA-4040N
10:04:33 PM #20 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
10:04:34 PM #21 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
10:04:34 PM #22 Phase 127 File dlgbrnst.cpp, Line 1725
Generating DVD high compatibility borders
10:04:34 PM #23 Phase 129 File dlgbrnst.cpp, Line 1725
Generating DVD borders completed successfully
10:04:34 PM #24 Phase 38 File dlgbrnst.cpp, Line 1725
Burn process failed at 4x (5,540 KB/s)
Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 5/20/2006 12:16:24 AM
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 9/10/1999 12:06:00 PM
File 'Drivers\PXHELP20.SYS': Ver=3.00.11B, size=46080 bytes, created 5/16/2006 11:23:54 PM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Silo
|
|
Advertisement
|
|
|
Junior Member
|
28. May 2007 @ 10:03 |
Link to this message
|
|
Wow too think of all the shit Ive been through and all I needed was a good lens cleaning.
WOW.
This can be closed now.
Silo
This message has been edited since posting. Last time this message was edited on 28. May 2007 @ 10:03
|
|
