|
|
|
Nero burns ok, but fails to verify on ALL sectors
|
|
|
cwigley
Newbie
|
5. June 2007 @ 10:51 |
Link to this message
|
Nero 6.6.0.1
NEC ND-3550A (internal)
Windows XP
All HD are SATA
Nero stopped working normally, around the same day that I installed/uninstalled Daemon Tools - I am not positive that, that is the culprit, but that is the only thing that changed that day. Ever since then, Nero cranks out the "Sectors XXX to XXX on disc are different to source" errors...and a LOT of them (1000+)
This issue is not related to media. These are A+ quality Verbatims that are used by multiple people in an production environment. I tried various spindles as well as Dual & single layers. No one else has had any issues with this media.
I don't believe this issue to be DVD drive related. I have an external drive (same model) hooked up thru firewire...I get identical results.
I have used DVD authoring software(no verify option) to successfully burn DVDs.
I have used CDCheck to verify that there are no CRC errors.
I have uninstalled Nero, and re-installed the same version. I have deleted the DVD drive out of the device manager, and reinstalled it. Neither has changed anything.
I updated nero's ASPI file.
Somehow Nero's ability to verify has been corrupted...and I don't know where to look next. Are there any other things I can do to fix this issue? Places to look? Logs to post?
I have posted a log file below, of the failed Nero verify...minus about 900 of the errors...I would appreciate it if someone could take a look, and see if they could point me in the right direction. Most of the posts about this issue, I've tried or they don't quite apply. Thank you!
- Collin
|
|
cwigley
Newbie
|
5. June 2007 @ 10:54 |
Link to this message
|
dvdauthor
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 12/8/2006 7:46:46 PM
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 7/28/2004 4:51:12 PM
Nero version: 6.6.0.1
Recorder: <_NEC DVD_RW ND-3550A> Version: 1.05 - HA 1 TA 0 - 6.6.0.1
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: <_NEC DVD_RW ND-3550A >Version: 1.05 - HA 1 TA 0 - 6.6.0.1
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD2500JS-75NCB1 iaStor Port 0 ID 0 DMA: On
DiskPeripheral : WDC WD1600YD-01NVB1 iaStor Port 0 ID 1 DMA: Off
DiskPeripheral : WDC WD2500JS-75NCB1 iaStor Port 0 ID 2 DMA: Off
DiskPeripheral : WDC WD1600YD-01NVB1 iaStor Port 0 ID 3 DMA: Off
CdRomPeripheral : _NEC DVD_RW ND-3550A atapi Port 1 ID 0 DMA: On
CdRomPeripheral : HE5592T FYF200C 1.0 auhgfehk Port 3 ID 0 DMA: Off
CdRomPeripheral : Nero IMAGEDRIVE2 2.26 imagedrv Port 4 ID 0 DMA: Off
=== CDRom-Device-Map ===
_NEC DVD_RW ND-3550A E: CDRom0
HE5592T FYF200C J: CDRom3
NERO IMAGEDRIVE2 K: CDRom6
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 2046MB (2095192kB)
Free physical memory: 1212MB (1241580kB)
Memory in use : 40 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
22.5.2007
UDF/ISO compilation
12:47:06 PM #1 Phase 112 File dlgbrnst.cpp, Line 1853
DVD-Video files reallocation started
12:47:06 PM #2 Text 0 File DVDVideoCompilation.cpp, Line 549
Content of VIDEO_TS.IFO has been modified
12:47:06 PM #3 Text 0 File DVDVideoCompilation.cpp, Line 549
Content of VIDEO_TS.BUP has been modified
12:47:06 PM #4 Phase 113 File dlgbrnst.cpp, Line 1853
DVD-Video files reallocation completed
12:47:06 PM #5 Text 0 File Isodoc.cpp, Line 6165
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 2 (Max. of 31 chars)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
12:47:06 PM #6 Phase 111 File dlgbrnst.cpp, Line 1853
DVD-Video files sorted
12:47:06 PM #7 Text 0 File Reader.cpp, Line 127
Reader running
12:47:06 PM #8 Text 0 File Writer.cpp, Line 122
Writer _NEC DVD_RW ND-3550A running
12:47:06 PM #9 ISO9660GEN -11 File geniso.cpp, Line 3286
First writeable address = 0 (0x00000000)
12:47:06 PM #10 ISO9660GEN -11 File geniso.cpp, Line 3286
First writeable address = 0 (0x00000000)
12:47:07 PM #11 Text 0 File Burncd.cpp, Line 3117
Turn on Disc-at-once, using DVD media
12:47:07 PM #12 Text 0 File DlgWaitCD.cpp, Line 256
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2285135 (507:48.35, 4463MB)
12:47:07 PM #13 Text 0 File DlgWaitCD.cpp, Line 268
Write in overburning mode: NO (enabled: CD)
12:47:07 PM #14 Text 0 File DlgWaitCD.cpp, Line 2309
Recorder: _NEC DVD_RW ND-3550A, Media type: DVD-R
Disc Manufacturer: MCC 03 - RG20
Disc Application Code: 64, Disc Physical Code: 193
12:47:07 PM #15 Text 0 File DlgWaitCD.cpp, Line 430
>>> Protocol of DlgWaitCD activities: <<<
=========================================
12:47:07 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 844
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2285136 (2285136) = #2285136/507:48.36
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2285136 blocks [_NEC DVD_RW ND-3550A]
--------------------------------------------------------------
12:47:07 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 1047
Prepare recorder [_NEC DVD_RW ND-3550A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4679958528, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2285136 | lead-out | 1 | 0x00 | 0x41
12:47:07 PM #18 Phase 24 File dlgbrnst.cpp, Line 1853
Caching of files started
12:47:07 PM #19 Text 0 File Burncd.cpp, Line 4003
Cache writing successful.
12:47:07 PM #20 Phase 25 File dlgbrnst.cpp, Line 1853
Caching of files completed
12:47:07 PM #21 Phase 36 File dlgbrnst.cpp, Line 1853
Burn process started at 8x (11,080 KB/s)
12:47:07 PM #22 Text 0 File ThreadedTransferInterface.cpp, Line 2497
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
12:47:07 PM #23 Text 0 File dlgbrnst.cpp, Line 1711
Set remaining time: 7:07,460 (427460ms) -> OK
12:47:07 PM #24 Text 0 File DVDR.cpp, Line 2027
Recording mode: Sequential Recording Mode
12:47:07 PM #25 Text 0 File Mmc.cpp, Line 20673
Set BUFE: Buffer underrun protection -> ON
12:47:07 PM #26 Text 0 File DVDR.cpp, Line 2168
Start write address at LBA 0
DVD high compatibility mode: Yes
12:47:07 PM #27 Text 0 File Cdrdrv.cpp, Line 8281
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
12:47:09 PM #28 Text 0 File Cdrdrv.cpp, Line 1284
12:47:09.554 - _NEC DVD_RW ND-3550A\H1 T0 : Queue again later
12:56:56 PM #29 Text 0 File WriterStatus.cpp, Line 116
<_NEC DVD_RW ND-3550A > start writing Lead-Out at LBA 2285136 (22DE50h), lenght 0 blocks
12:56:56 PM #30 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
12:56:56 PM #31 Text 0 File DVDR.cpp, Line 2410
EndDAO: Last written address was 2285135
12:57:12 PM #32 Text 0 File dlgbrnst.cpp, Line 1711
Set remaining time: 0:00,000 (0ms) -> OK
12:57:12 PM #33 Text 0 File dlgbrnst.cpp, Line 1711
Set remaining time: 0:00,000 (0ms) -> OK
12:57:12 PM #34 Phase 37 File dlgbrnst.cpp, Line 1853
Burn process completed successfully at 8x (11,080 KB/s)
12:57:12 PM #35 Phase 78 File dlgbrnst.cpp, Line 1853
Data verification started
12:57:20 PM #36 SectorVerify 11 File Cdrdrv.cpp, Line 9286
Sector 0 on disc has different content to source
12:57:20 PM #37 SectorVerify 10 File Cdrdrv.cpp, Line 9286
Sectors from 16 to 20 on disc are different to source
12:57:20 PM #38 SectorVerify 10 File Cdrdrv.cpp, Line 9286
Sectors from 32 to 37 on disc are different to source
12:57:20 PM #39 SectorVerify 10 File Cdrdrv.cpp, Line 9286
Sectors from 48 to 53 on disc are different to source
12:57:20 PM #40 SectorVerify 10 File Cdrdrv.cpp, Line 9286
Sectors from 64 to 65 on disc are different to source
12:57:20 PM #41 SectorVerify 11 File Cdrdrv.cpp, Line 9286
Sector 96 on disc has different content to source
12:57:20 PM #42 SectorVerify 11 File Cdrdrv.cpp, Line 9286
Sector 128 on disc has different content to source
12:57:20 PM #43 SectorVerify 11 File Cdrdrv.cpp, Line 9286
Sector 160 on disc has different content to source
---{2800 lines SNIPPED!}---------------------------------------------------
12:59:57 PM #990 SectorVerify 10 File Cdrdrv.cpp, Line 9286
Sectors from 966912 to 967935 on disc are different to source
12:59:57 PM #991 SectorVerify 10 File Cdrdrv.cpp, Line 9286
Sectors from 967936 to 968959 on disc are different to source
12:59:57 PM #992 SectorVerify 10 File Cdrdrv.cpp, Line 9286
Sectors from 968960 to 969983 on disc are different to source
12:59:57 PM #993 SectorVerify 10 File Cdrdrv.cpp, Line 9286
Sectors from 969984 to 971007 on disc are different to source
12:59:58 PM #994 SectorVerify 10 File Cdrdrv.cpp, Line 9286
Sectors from 971008 to 972031 on disc are different to source
12:59:58 PM #995 SectorVerify 10 File Cdrdrv.cpp, Line 9286
Sectors from 972032 to 973055 on disc are different to source
12:59:58 PM #996 SectorVerify 10 File Cdrdrv.cpp, Line 9286
Sectors from 973056 to 974079 on disc are different to source
12:59:58 PM #997 SectorVerify 10 File Cdrdrv.cpp, Line 9286
Sectors from 974080 to 975103 on disc are different to source
12:59:58 PM #998 SectorVerify 10 File Cdrdrv.cpp, Line 9286
Sectors from 975104 to 976127 on disc are different to source
12:59:58 PM #999 SectorVerify 10 File Cdrdrv.cpp, Line 9286
Sectors from 976128 to 977151 on disc are different to source
12:59:58 PM #1000 SectorVerify 10 File Cdrdrv.cpp, Line 9286
Sectors from 977152 to 978175 on disc are different to source
Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 4:07:32 PM
File 'Drivers\PXHELP20.SYS': Ver=3.00.43J, size=36624 bytes, created 12/18/2006 2:59:38 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 12:59:44 AM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
This message has been edited since posting. Last time this message was edited on 5. June 2007 @ 10:55
|
Moderator
|
5. June 2007 @ 13:35 |
Link to this message
|
Hi cwigley
Update the firmware to 1.06.
If the external has a firmware version of 1.05 or under update that one too.
Update Nero to 6.6.1.15a - package 1 - link.
Try disabling Nero's image drive also.
Run a disc defrag, cleanup, virus scan and registry cleaner lately?
If not do those.
Here's a good free registry cleaner if you need one - ccleaner. Use the cleaner & issues options. The cleaner option does a better job imho then the windows cleanup utility.
Try burning and verify w/ the free ImgBurn and see if you get the same results. Use the build mode to add the files/video_ts folder to burn.
|
|
