|
|
|
Could not perform start of Disc-at-Once
|
|
|
madis
Newbie
|
10. June 2007 @ 06:41 |
Link to this message
|
Hi,
I have a problem with my TSSTcorp CD/DVDW SH-S182M SCSI CdRom Device CD/DVD burning device. It's a Toshiba-Samsung product. I'm using Nero OEM 6.6.1.15 and every time i try to burn a data DVD(or any DVD) i get this error message "Could not perform start of Disc-at-Once". When i hit the Burn button the disc in the drive even doesn't spin and after few seconds drive ejects it(even on lower speeds). I am using Philips DVD+RW and also tried Platinum Plus DVD+RW.
Everything works with CDs
I appreciate your help.
Here is my endless error log:
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26.10.2004 19:35:32
Nero Version: 6.6.0.19
Internal Version: 6, 6, 0, 19d
(Nero Express)
Recorder: <TSSTcorp CD/DVDW SH-S182M>Version: SB00 - HA 4 TA 1 - 6.6.0.19
Adapter driver: <JRAID> HA 4
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <CH3277P YLU834M >Version: 1.0 - HA 5 TA 0 - 6.6.0.19
Adapter driver: <ayd0izgb> HA 5
=== Scsi-Device-Map ===
DiskPeripheral : SATA WDC WD2500 JRAID Port 4 ID 0 DMA: Off
CdRomPeripheral : TSSTcorpCD/DVDW SH-S182MSB00 JRAID Port 4 ID 1 DMA: Off
CdRomPeripheral : CH3277P YLU834M 1.0 ayd0izgb Port 5 ID 0 DMA: Off
=== CDRom-Device-Map ===
TSSTcorp CD/DVDW SH-S182M D: CDRom0
CH3277P YLU834M E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 2047MB (2096620kB)
Free physical memory: 1523MB (1559724kB)
Memory in use : 25 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
2.6.2007
ISO compilation
20:37:47 #1 Text 0 File Isodoc.cpp, Line 6368
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
20:37:47 #2 Text 0 File Reader.cpp, Line 127
Reader running
20:37:47 #3 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
20:37:47 #4 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
20:37:48 #5 Text 0 File DlgWaitCD.cpp, Line 272
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 607 ( 0:08.07, 1MB)
20:37:48 #6 Text 0 File DlgWaitCD.cpp, Line 284
Write in overburning mode: NO (enabled: DVD)
20:37:48 #7 Text 0 File DlgWaitCD.cpp, Line 2494
Recorder: TSSTcorp CD/DVDW SH-S182M, Media type: DVD+RW
Disc Manufacturer ID: MBIPG101, Media Type ID: W04, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 1
20:37:48 #8 Text 0 File DlgWaitCD.cpp, Line 450
>>> Protocol of DlgWaitCD activities: <<<
=========================================
20:37:48 #9 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 608 (608) = #608/0:8.8
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 608 blocks [TSSTcorp CD/DVDW SH-S182M]
--------------------------------------------------------------
20:37:48 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [TSSTcorp CD/DVDW SH-S182M] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 1245184, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
608 | lead-out | 1 | 0x41 | 0x00
20:37:48 #11 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
20:37:48 #12 Text 0 File Burncd.cpp, Line 4122
Cache writing successful.
20:37:48 #13 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
20:37:48 #14 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 4x (5 540 KB/s)
20:37:48 #15 SCSI -1066 File Cdrdrv.cpp, Line 1183
SCSI Exec, HA 4, TA 1, LUN 0, buffer 0x03B75400
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0xFF 0x40 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x24 0x00
20:37:48 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
20:37:48 #17 Text 0 File Cdrdrv.cpp, Line 8926
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+RW (9), Part Version: 1.1x (2)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: re-writable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 1 h
Disc Manufacturer ID: MBIPG101
Media type ID: W04
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 57
Media Specific [16..63]:
00 00 01 4D 42 49 50 47 - 31 30 31 57 30 34 00 39 ...MBIPG101W04.9
23 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 #...............
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
20:37:48 #18 Text 0 File Cdrdrv.cpp, Line 8926
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+RW (9), Part Version: 1.1x (2)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: re-writable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 1 h
Disc Manufacturer ID: MBIPG101
Media type ID: W04
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 57
Media Specific [16..63]:
00 00 01 4D 42 49 50 47 - 31 30 31 57 30 34 00 39 ...MBIPG101W04.9
23 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 #...............
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
20:37:48 #19 Text 0 File Cdrdrv.cpp, Line 8926
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+RW (9), Part Version: 1.1x (2)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: re-writable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 1 h
Disc Manufacturer ID: MBIPG101
Media type ID: W04
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 57
Media Specific [16..63]:
00 00 01 4D 42 49 50 47 - 31 30 31 57 30 34 00 39 ...MBIPG101W04.9
23 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 #...............
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
20:37:48 #20 Text 0 File DVDR.cpp, Line 7119
Drive: TSSTcorp CD/DVDW SH-S182M
Book Type request [TSST]: DVD-ROM
Changing the Book Type was finished successfully, return code 0
20:37:48 #21 CDR -1207 File DVDR.cpp, Line 5383
Book Type automatically set to: DVD-ROM
20:37:48 #22 Phase 98 File dlgbrnst.cpp, Line 1832
Start formatting disc before burning
20:37:48 #23 SCSI -1065 File Cdrdrv.cpp, Line 1183
SCSI Exec, HA 4, TA 1, LUN 0, buffer 0x03B75200
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x20
Sense Qual: 0x00
CDB Data: 0x04 0x11 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x20 0x00
20:37:48 #24 Phase 101 File dlgbrnst.cpp, Line 1832
Formatting disc failed
20:37:48 #25 Text 0 File DVDPlusRW.cpp, Line 659
Start write address at LBA 0
DVD high compatibility mode: Yes
20:37:48 #26 CDR -1065 File ThreadedTransferInterface.cpp, Line 1778
Invalid command
20:37:48 #27 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1778
Could not perform start of Disc-at-once
20:37:48 #28 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 4x (5 540 KB/s)
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 20.12.2004 21:37:14 (Prassi/Veritas driver for win 2K)
File 'Drivers\jraid.sys': Ver=1.10.02.00 built by: WinDDK, size=43264 bytes, created 2.06.2006 14:49:56 (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
|
Advertisement
|
|
|
|
Moderator
|
10. June 2007 @ 07:58 |
Link to this message
|
Hi madis
Recorder: <TSSTcorp CD/DVDW SH-S182M>Version: SB00
Update the firmware on the drive. The latest is SB04.
Disc Manufacturer ID: MBIPG101
Not the best. Better +RW discs would be Verbatim or Maxell.
Formatting disc failed
Do a full erase of the disc. If that fails then something is up with disc itself.
DiskPeripheral : SATA WDC WD2500 JRAID Port 4 ID 0 DMA: Off
CdRomPeripheral : TSSTcorpCD/DVDW SH-S182MSB00 JRAID Port 4 ID 1 DMA: Off
CdRomPeripheral : CH3277P YLU834M 1.0 ayd0izgb Port 5 ID 0 DMA: Off
You probably fine here - Nero only report DMA correctly when the drives are connected by ide. Check device manager and the controller for these drive to check and make DMA is on.
|
|
madis
Newbie
|
10. June 2007 @ 08:23 |
Link to this message
|
|
Thank you for your reply, but i haven't found a solution jet.
I updated firmware.
DMA is enabled(Tranfer mode: DMA if available) on all drives.
And drive ejects the disc when i try to Full Erase it.
Help"
|
Moderator
|
10. June 2007 @ 08:37 |
Link to this message
|
|
Ok try another disc that hasn't been burned to before.
If still a no go then switch the media to the ones above.
Have you tried burning to non RW discs like -R or +R discs? Any problems w/ them?
|
|
madis
Newbie
|
14. June 2007 @ 07:57 |
Link to this message
|
Ok, I bought a Verbatim DVD+R disc and everything works just fine. It seems that my PC has problems writing RW discs. Any idea why?
But thanks for help anyway.
|
Moderator
|
14. June 2007 @ 13:56 |
Link to this message
|
Could just be that the 2 you've tried aren't compatible w/ the drive.
Another option is try another burning program and see hoow that goes w/ the rw.
Here's a good free one - ImgBurn.
Use the build mode to add the data files or the video_ts folder to burn.
|
|
madis
Newbie
|
15. June 2007 @ 10:06 |
Link to this message
|
|
I installed ImgBurn, built a a iso file and when i hit the burn button i got a message "The disc needs to be formatted before use...."
I selected YES, but recived an error message "Failed to Erase Disc - Invalid Command Operation Code-Operation Failed! - Duration: 00:00:00"
|
Moderator
|
15. June 2007 @ 15:01 |
Link to this message
|
Has this disc ever been burned too? Sounds like it has - that's why Nero & ImgBurn are trying to format then when that fails they try to erase the disc.
have you tried one or a different brand that hasn't been burned to?
|
|
madis
Newbie
|
17. June 2007 @ 07:07 |
Link to this message
|
|
No, the disc hasn't been burned to.
|
Moderator
|
17. June 2007 @ 10:39 |
Link to this message
|
|
Ok - I'm at a loss on why this burner isn't liking the RW media.
You still might want to try another brand besides Platinum Plus or Phillips - try Verbatim or Maxell.
|
|
Advertisement
|
|
|
|
Sabben
Newbie
|
25. July 2007 @ 05:39 |
Link to this message
|
Hello,
This is a firmware related problem. Your DVD writer is not used to newer type of DVDs. I have just solved this problem by doing this:
1. I find out exactly what kind of DVD writer I have.
2. I went to their site and downloaded the correct firmware, and the instruction.
3. I followed the instruction provided.
4. After flashing the firmware everything started to work even better than before.
Good Luck!
Shahab
|
|
