|
|
|
nero 7 power calibration errors
|
|
|
Rhino2323
Newbie
|
1. July 2007 @ 19:05 |
Link to this message
|
I have been using Nero for burning dvd's for a few years now and have just ran into problems in the last few days, I have done a clean install, replaced all the cables, checked my firmware, turned off the Imapi settings, upgraded my version of Nero and everything else that I have read in multiple fourms and I am now stuck and ready to give up....
I HOPE THAT SOMEONE OUT THERE CAN HELP ME!!!!
here is the log from Nero....
xxxx-xxxx-xxxx-xxxx-xxxx-xxxx-****
Windows XP 5.1
IA32
WinAspi: -
NT-SPTI used
Nero Version: 7.9.6.0
Internal Version: 7, 9, 6, 0
Recorder: <LITE-ON DVDRW SOHW-1693S>Version: KS0B - HA 1 TA 0 - 7.9.6.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <LITE-ON DVDRW SOHW-1693S>Version: KS0B - HA 1 TA 0 - 7.9.6.0
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD3200JB-00KFA0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : WDC WD1600JB-00GVC0 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : LITE-ON DVDRW SOHW-1693S atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
LITE-ON DVDRW SOHW-1693S E: CdRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1015MB (1039856kB)
Free physical memory: 386MB (395704kB)
Memory in use : 61 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
1.7.2007
UDF/ISO compilation
7:47:09 PM #1 Text 0 File SCSIPTICommands.cpp, Line 424
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
7:47:10 PM #2 Phase 112 File dlgbrnst.cpp, Line 1762
DVD-Video files reallocation started
7:47:10 PM #3 Phase 114 File dlgbrnst.cpp, Line 1762
DVD-Video files reallocation completed (no file modified)
7:47:10 PM #4 Text 0 File Isodoc.cpp, Line 6663
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Options : automatic
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
7:47:10 PM #5 Phase 111 File dlgbrnst.cpp, Line 1762
DVD-Video files sorted
7:47:10 PM #6 ISO9660GEN -11 File Geniso.cpp, Line 3343
First writeable address = 0 (0x00000000)
7:47:10 PM #7 ISO9660GEN -11 File Geniso.cpp, Line 3343
First writeable address = 0 (0x00000000)
7:47:10 PM #8 Text 0 File Burncd.cpp, Line 3508
Turn on Disc-At-Once, using DVD media
7:47:10 PM #9 Text 0 File DlgWaitCD.cpp, Line 307
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2141631 (475:55.06, 4182MB)
7:47:10 PM #10 Text 0 File DlgWaitCD.cpp, Line 319
Write in overburning mode: NO (enabled: CD)
7:47:10 PM #11 Text 0 File DlgWaitCD.cpp, Line 2964
Recorder: LITE-ON DVDRW SOHW-1693S, Media type: DVD+R
Disc Manufacturer ID: CMC MAG, Media Type ID: M01, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 7
7:47:10 PM #12 Text 0 File DlgWaitCD.cpp, Line 493
>>> Protocol of DlgWaitCD activities: <<<
=========================================
7:47:10 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 793
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2141632 (2141632) = #2141632/475:55.7
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2141632 blocks [E: LITE-ON DVDRW SOHW-1693S]
--------------------------------------------------------------
7:47:11 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 995
Prepare [E: LITE-ON DVDRW SOHW-1693S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4386062336, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 2141632 | 0 | 0x00
2141632 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
7:47:11 PM #15 Text 0 File SCSIPTICommands.cpp, Line 215
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME
7:47:11 PM #16 Text 0 File Burncd.cpp, Line 4294
Caching options: cache CDRom or Network-Yes, small files-Yes (<64KB)
7:47:11 PM #17 Phase 24 File dlgbrnst.cpp, Line 1762
Caching of files started
7:47:11 PM #18 Text 0 File Burncd.cpp, Line 4413
Cache writing successful.
7:47:11 PM #19 Phase 25 File dlgbrnst.cpp, Line 1762
Caching of files completed
7:47:11 PM #20 Phase 36 File dlgbrnst.cpp, Line 1762
Burn process started at 16x (22,160 KB/s)
7:47:11 PM #21 Text 0 File ThreadedTransferInterface.cpp, Line 2721
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
7:47:11 PM #22 Text 0 File Cdrdrv.cpp, Line 9872
---- Disc Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 7 h
Disc Manufacturer ID: CMC.MAG.
Media type ID: M01
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 07 43 4D 43 20 4D - 41 47 00 4D 30 31 00 38 ...CMC.MAG.M01.8
23 54 37 18 00 3E 6E 00 - 70 62 15 15 0B 0B 08 08 #T7..>n.pb......
01 19 1B 0B 0B 0E 0F 01 - 00 00 00 00 00 00 00 00 ................
7:47:11 PM #23 Text 0 File DVDR.cpp, Line 7098
Drive: LITE-ON DVDRW SOHW-1693S
Book Type request [LO], rev 3: DVD-ROM
Changing the Book Type was finished successfully, return code 0
7:47:11 PM #24 CDR -1207 File DVDR.cpp, Line 6477
Book Type automatically set to: DVD-ROM
7:47:11 PM #25 Text 0 File DVDPlusRW.cpp, Line 675
Start write address at LBA 0
DVD high compatibility mode: Yes
7:47:11 PM #26 Text 0 File ThreadedTransfer.cpp, Line 269
Pipe memory size 83836800
7:49:08 PM #27 SPTI -1106 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1106)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 73 03
Buffer x08b50040: Len x10000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
7:49:08 PM #28 CDR -1106 File Writer.cpp, Line 303
Power calibration error
E: LITE-ON DVDRW SOHW-1693S
7:49:41 PM #29 Phase 127 File dlgbrnst.cpp, Line 1762
Generating DVD high compatibility borders
7:50:05 PM #30 Text 0 File DVDPlusRW.cpp, Line 935
EndDAO: Last written address 0
7:50:05 PM #31 Phase 129 File dlgbrnst.cpp, Line 1762
Generating DVD borders completed successfully
7:50:05 PM #32 Text 0 File DVDR.cpp, Line 7098
Drive: LITE-ON DVDRW SOHW-1693S
Book Type request [LO], rev 3: DVD+R
Changing the Book Type was finished successfully, return code 0
7:50:05 PM #33 Phase 38 File dlgbrnst.cpp, Line 1762
Burn process failed at 16x (22,160 KB/s)
7:50:06 PM #34 Text 0 File SCSIPTICommands.cpp, Line 261
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
7:50:09 PM #35 Text 0 File Cdrdrv.cpp, Line 11185
DriveLocker: UnLockVolume completed
7:50:09 PM #36 Text 0 File SCSIPTICommands.cpp, Line 424
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
PLEASE HELP!!!
|
|
Advertisement
|
 |
|
|
AfterDawn Addict
|
1. July 2007 @ 19:38 |
Link to this message
|
Basically I can see only 2 things, you are using poor quality media
Quote:
Disc Manufacturer ID: CMC MAG, Media Type ID: M01, Product revision number: 0
try Verbatim or Sony (made in Japan)
and you are burning way too fast
Quote:
Burn process started at 16x (22,160 KB/s)
Slow burn to 4X
|
|
Rhino2323
Newbie
|
1. July 2007 @ 19:47 |
Link to this message
|
|
I've been using Maxell discs for a long time and havent had any problems with them, also the slowest I can go is 6x, I have tried all the speed settings too..
|
AfterDawn Addict
|
1. July 2007 @ 20:24 |
Link to this message
|
Quote:
I've been using Maxell discs for a long time and havent had any problems with them
Well, you have NOW!!
|
|
Rhino2323
Newbie
|
1. July 2007 @ 20:46 |
Link to this message
|
|
peachy keen! anyone else want to in put into my problem?
|
|
Rhino2323
Newbie
|
3. July 2007 @ 22:22 |
Link to this message
|
|
bought some new and different cd's.... still the same problem...
|
AfterDawn Addict
|
3. July 2007 @ 22:53 |
Link to this message
|
|
Post another log, this time using the NEW media
|
|
Rhino2323
Newbie
|
15. July 2007 @ 15:10 |
Link to this message
|
here is the latest log file... I did burn a good disc earlier... but it's back to the same ol thing.. I'm about ready to grab my hammer and smash the hell out of this burner... it will read cd-r's, data dvd's and movies, but will not burn movies.
Windows XP 5.1
IA32
WinAspi: -
NT-SPTI used
Nero Version: 7.10.1.0
Internal Version: 7, 10, 1, 0
Recorder: Version: KS0B - HA 1 TA 0 - 7.10.1.0
Adapter driver: HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: Version: KS0B - HA 1 TA 0 - 7.10.1.0
Adapter driver: HA 1
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD3200JB-00KFA0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : WDC WD1600JB-00GVC0 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : LITE-ON DVDRW SOHW-1693S atapi Port 1 ID 0 DMA: On
CdRomPeripheral : ROXIO DVD-ROM EMULATOR2.00 c2scsi Port 2 ID 0 DMA: Off
=== CDRom-Device-Map ===
LITE-ON DVDRW SOHW-1693S E: CdRom0
ROXIO DVD-ROM EMULATOR F: CdRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1015MB (1039856kB)
Free physical memory: 440MB (450744kB)
Memory in use : 56 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
15.7.2007
UDF/ISO compilation
2:57:42 PM #1 Text 0 File SCSIPTICommands.cpp, Line 424
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
2:57:43 PM #2 Phase 112 File dlgbrnst.cpp, Line 1762
DVD-Video files reallocation started
2:57:43 PM #3 Phase 114 File dlgbrnst.cpp, Line 1762
DVD-Video files reallocation completed (no file modified)
2:57:43 PM #4 Text 0 File Isodoc.cpp, Line 6666
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Options : automatic
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
2:57:43 PM #5 Phase 111 File dlgbrnst.cpp, Line 1762
DVD-Video files sorted
2:57:44 PM #6 ISO9660GEN -11 File Geniso.cpp, Line 3343
First writeable address = 0 (0x00000000)
2:57:44 PM #7 ISO9660GEN -11 File Geniso.cpp, Line 3343
First writeable address = 0 (0x00000000)
2:57:44 PM #8 Text 0 File Burncd.cpp, Line 3508
Turn on Disc-At-Once, using DVD media
2:57:44 PM #9 Text 0 File DlgWaitCD.cpp, Line 307
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 1881311 (418:04.11, 3674MB)
2:57:44 PM #10 Text 0 File DlgWaitCD.cpp, Line 319
Write in overburning mode: NO (enabled: CD)
2:57:44 PM #11 Text 0 File DlgWaitCD.cpp, Line 2972
Recorder: LITE-ON DVDRW SOHW-1693S, Media type: DVD+R
Disc Manufacturer ID: CMC MAG, Media Type ID: M01, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 7
2:57:44 PM #12 Text 0 File DlgWaitCD.cpp, Line 493
>>> Protocol of DlgWaitCD activities: <<<
=========================================
2:57:44 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 793
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1881312 (1881312) = #1881312/418:4.12
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1881312 blocks [E: LITE-ON DVDRW SOHW-1693S]
--------------------------------------------------------------
2:57:44 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 995
Prepare [E: LITE-ON DVDRW SOHW-1693S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3852926976, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 1881312 | 0 | 0x00
1881312 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
2:57:44 PM #15 Text 0 File SCSIPTICommands.cpp, Line 215
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME
2:57:44 PM #16 Text 0 File Burncd.cpp, Line 4294
Caching options: cache CDRom or Network-Yes, small files-Yes (<64KB)
2:57:44 PM #17 Phase 24 File dlgbrnst.cpp, Line 1762
Caching of files started
2:57:44 PM #18 Text 0 File Burncd.cpp, Line 4413
Cache writing successful.
2:57:44 PM #19 Phase 25 File dlgbrnst.cpp, Line 1762
Caching of files completed
2:57:44 PM #20 Phase 36 File dlgbrnst.cpp, Line 1762
Burn process started at 6x (8,310 KB/s)
2:57:44 PM #21 Text 0 File ThreadedTransferInterface.cpp, Line 2721
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
2:57:44 PM #22 Text 0 File Cdrdrv.cpp, Line 9872
---- Disc Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 7 h
Disc Manufacturer ID: CMC.MAG.
Media type ID: M01
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 07 43 4D 43 20 4D - 41 47 00 4D 30 31 00 38 ...CMC.MAG.M01.8
23 54 37 18 00 3E 6E 00 - 70 62 15 15 0B 0B 08 08 #T7..>n.pb......
01 19 1B 0B 0B 0E 0F 01 - 00 00 00 00 00 00 00 00 ................
2:57:44 PM #23 Text 0 File DVDR.cpp, Line 7098
Drive: LITE-ON DVDRW SOHW-1693S
Book Type request [LO], rev 3: DVD-ROM
Changing the Book Type was finished successfully, return code 0
2:57:44 PM #24 CDR -1207 File DVDR.cpp, Line 6477
Book Type automatically set to: DVD-ROM
2:57:44 PM #25 Text 0 File DVDPlusRW.cpp, Line 675
Start write address at LBA 0
DVD high compatibility mode: Yes
2:57:44 PM #26 Text 0 File ThreadedTransfer.cpp, Line 269
Pipe memory size 83836800
2:59:10 PM #27 SPTI -1106 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1106)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 73 03
Buffer x08ec0040: Len x10000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
2:59:10 PM #28 CDR -1106 File Writer.cpp, Line 303
Power calibration error
E: LITE-ON DVDRW SOHW-1693S
2:59:11 PM #29 Phase 127 File dlgbrnst.cpp, Line 1762
Generating DVD high compatibility borders
2:59:11 PM #30 Text 0 File DVDPlusRW.cpp, Line 935
EndDAO: Last written address 0
2:59:11 PM #31 Phase 129 File dlgbrnst.cpp, Line 1762
Generating DVD borders completed successfully
2:59:12 PM #32 Text 0 File DVDR.cpp, Line 7098
Drive: LITE-ON DVDRW SOHW-1693S
Book Type request [LO], rev 3: DVD+R
Changing the Book Type was finished successfully, return code 0
2:59:12 PM #33 Phase 38 File dlgbrnst.cpp, Line 1762
Burn process failed at 6x (8,310 KB/s)
2:59:14 PM #34 Text 0 File SCSIPTICommands.cpp, Line 261
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
2:59:20 PM #35 SPTI -1079 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1079)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x53
Sense Qual: 0x00
CDB Data: 0x1B 00 00 00 02 00 00 00 00 00 00 00
Sense Area: 0x70 00 04 00 00 00 00 0A 00 00 00 00 53
2:59:26 PM #36 SPTI -1079 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1079)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x53
Sense Qual: 0x00
CDB Data: 0x1B 00 00 00 02 00 00 00 00 00 00 00
Sense Area: 0x70 00 04 00 00 00 00 0A 00 00 00 00 53
2:59:26 PM #37 Text 0 File Cdrdrv.cpp, Line 11185
DriveLocker: UnLockVolume completed
2:59:26 PM #38 Text 0 File SCSIPTICommands.cpp, Line 424
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
AfterDawn Addict
|
15. July 2007 @ 15:50 |
Link to this message
|
Some people will just not listen
Quote:
Disc Manufacturer ID: CMC MAG, Media Type ID: M01, Product revision number: 0
|
|
Rhino2323
Newbie
|
15. July 2007 @ 16:15 |
Link to this message
|
|
I've tried 4 different brands of cd's..... maybe I should just smash this recorder and buy an new one.
I'm not waisting anymore of my $30 cd's.
\
|
AfterDawn Addict
|
15. July 2007 @ 16:23 |
Link to this message
|
You have tried everything such as updating firmware, updating Nero, slowing burn speed but you continue to use memorex discs. This is the reason I asked you to post another log...using DIFFERENT media if you dont want to accept that CMC mag discs are crap then that's your choice but everyone here will advise you the same.
BTW: Quote:
I'm not waisting anymore of my $30 cd's.
This statement amuses me...do you mean $30/100 discs...as NO discs(singluar) are worth $30.00
This message has been edited since posting. Last time this message was edited on 15. July 2007 @ 16:25
|
|
Rhino2323
Newbie
|
15. July 2007 @ 16:36 |
Link to this message
|
I will not express my feelings right now... I never said I was using memorex cd's you should clean the dust off your glasses... and if you read my post again I said that I was able to burn a PERFECT copy earlier... it seems that I can get a good copy every once in a while... and no these were $30 for 15 disc's I live in a small town and dont have the luxery of being able to walk into a best buy or circut city for better quality discs or I would..... I could burn fine untill I was updating my machine with XP SP 2, I have disabled the IMAPI settings, blown out the drive, there is no new firmware for this drive, and have tried a few different brands of media, I am burning as slow as this drive will go....
|
|
puritan00
Newbie
|
15. July 2007 @ 16:36 |
Link to this message
|
I had an irritating problem, and I actually fixed it by going back a few versions on firmware. The new nero didnt like my new firmware, but does like my old *4 version old copy I happened to still have* firmware. Worth a try> :-P
PURITAN
|
|
Rhino2323
Newbie
|
15. July 2007 @ 16:41 |
Link to this message
|
you have the older firmware for THIS drive?
|
AfterDawn Addict
|
15. July 2007 @ 16:42 |
Link to this message
|
Quote:
I never said I was using memorex cd's you should clean the dust off your glasses... and if you read my post again
No you didnt say you were using memorex
Your history log DID
Quote:
Disc Manufacturer ID: CMC MAG, Media Type ID: M01, Product revision number: 0
|
|
puritan00
Newbie
|
15. July 2007 @ 16:47 |
Link to this message
|
no I have a different drive, you can ussually find a version or 2 back on version tracker, or justFing google it.. ;) I have a differnt drive type, going back a version in firmware may not help you, but it helped me. Just trying to be helpful.
your drive seems to be a lite on? Perhaps the lite on site has older versions too.
http://www.liteonit.com.tw/global/index....pper&Itemid=154
PURITAN
|
|
Rhino2323
Newbie
|
15. July 2007 @ 16:48 |
Link to this message
|
|
Interesting... the cd's must have been labeled wrong... cause none of them say memorex... strange...
|
AfterDawn Addict
|
15. July 2007 @ 16:49 |
Link to this message
|
|
BTW: At no time at all in any of my replies in this thread have I used the word memorex....only cmc mag
|
|
puritan00
Newbie
|
15. July 2007 @ 16:51 |
Link to this message
|
another fyi.. There s only like 3 dvd manufacturers in the world. I believe gwen can correct me. maybe 4. But theres about 70 brands. or more. They sell the disk once its made and memorex or maxwell put their name on it. basically. So.. fyi I guess
PURITAN
|
|
Rhino2323
Newbie
|
15. July 2007 @ 16:53 |
Link to this message
|
Originally posted by gwendolin:
BTW: At no time at all in any of my replies in this thread have I used the word memorex....only cmc mag
time stamp 20:23...
"You have tried everything such as updating firmware, updating Nero, slowing burn speed but you continue to use memorex discs."
|
AfterDawn Addict
|
15. July 2007 @ 16:58 |
Link to this message
|
|
|
Advertisement
|
|
|
|
Rhino2323
Newbie
|
15. July 2007 @ 17:02 |
Link to this message
|
|
Ok then why is it I have had NO problems with using this brand before? and I have burned over 100 disc's using the same brand...
|
|
