|
|
|
Nero 7.10.1.0 Illegal Disc error
|
|
|
ARcanUS
Newbie
|
18. July 2007 @ 22:45 |
Link to this message
|
Hello, using a SATA Lite On LH-20A1S DVD+/-RW with 8x DVD write speed on a Windows Server 2003 R2 x64 SP1. I get an illegal disc error all the time a little but into the burn. I've coastered four discs, two while burning at 4x, so I dont think its the media, which I admit is a crappy brand I got from Frys for cheap, but even bad media have at least 50% burnable discs. Here is the log, any help is appreciated, and thanks in advance.
Quote: Mothra
{key removed}
Windows XP 5.2
AMD64
Wow64Process
WinAspi: -
NT-SPTI used
Nero Version: 7.10.1.0
Internal Version: 7, 10, 1, 0
Recorder: Version: 9L08 - HA 1 TA 0 - 7.10.1.0
Adapter driver: HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: Version: 1.0 - HA 1 TA 1 - 7.10.1.0
Adapter driver: HA 1
=== Scsi-Device-Map ===
DiskPeripheral : IOMEGA ZIP 100 atapi Port 0 ID 1 DMA: Off
DiskPeripheral : SAMSUNG HD403LJ nvata64 Port 2 ID 0 DMA: Off
CdRomPeripheral : LITE-ON DVDRW LH-20A1S nvata64 Port 2 ID 2 DMA: Off
OtherPeripheral : SI Pseudo Device 0000 Si3531 Port 4 ID 31 DMA: Off
CdRomPeripheral : SM1221P MMB551Y 1.0 ar8t9m4b Port 5 ID 0 DMA: Off
=== CDRom-Device-Map ===
LITE-ON DVDRW LH-20A1S D: CdRom0
SM1221P MMB551Y Z: CdRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 2047MB (2096316kB)
Free physical memory: 1506MB (1542532kB)
Memory in use : 26 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
18.7.2007
Burn DVD Image
11:14:23 PM #1 Text 0 File SCSIPTICommands.cpp, Line 424
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
11:14:23 PM #2 Text 0 File Burncd.cpp, Line 3508
Turn on Disc-At-Once, using DVD media
11:14:23 PM #3 Text 0 File DlgWaitCD.cpp, Line 307
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1873039 (416:13.64, 3658MB)
11:14:23 PM #4 Text 0 File DlgWaitCD.cpp, Line 319
Write in overburning mode: NO (enabled: CD)
11:14:23 PM #5 Text 0 File DlgWaitCD.cpp, Line 2972
Recorder: LITE-ON DVDRW LH-20A1S, Media type: DVD-R
Disc Manufacturer: SONY08 - D1
Disc Application Code: 64, Disc Physical Code: 193
11:14:23 PM #6 Text 0 File DlgWaitCD.cpp, Line 493
>>> Protocol of DlgWaitCD activities: <<<
=========================================
11:14:23 PM #7 Text 0 File ThreadedTransferInterface.cpp, Line 793
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 1873040 (1873040) = #1873040/416:13.65
not relocatable, disc pos for caching/writing not required/not required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1873040 blocks [D: LITE-ON DVDRW LH-20A1S]
--------------------------------------------------------------
11:14:23 PM #8 Text 0 File ThreadedTransferInterface.cpp, Line 995
Prepare [D: LITE-ON DVDRW LH-20A1S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3835985920, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 1873040 | 1873040 | 0x00
1873040 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
11:14:43 PM #9 Text 0 File SCSIPTICommands.cpp, Line 238
Error on LockVolume: Access is denied.
11:14:43 PM #10 Text 0 File SCSIPTICommands.cpp, Line 288
SPTI - Error 5 on DismountVolue: Access is denied.
11:14:53 PM #11 Text 0 File SCSIPTICommands.cpp, Line 238
Error on LockVolume: Access is denied.
11:14:54 PM #12 Text 0 File Burncd.cpp, Line 4294
Caching options: cache CDRom or Network-Yes, small files-No (<64KB)
11:14:54 PM #13 Phase 24 File dlgbrnst.cpp, Line 1762
Caching of files started
11:14:54 PM #14 Text 0 File Burncd.cpp, Line 4413
Cache writing successful.
11:14:54 PM #15 Phase 25 File dlgbrnst.cpp, Line 1762
Caching of files completed
11:14:54 PM #16 Phase 32 File dlgbrnst.cpp, Line 1762
Simulation started at 8x (11,080 KB/s)
11:14:54 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2721
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
11:14:54 PM #18 Text 0 File DVDR.cpp, Line 3225
Recording mode: Sequential Recording Mode
11:14:54 PM #19 Text 0 File DVDR.cpp, Line 3381
Start write address at LBA 0
DVD high compatibility mode: Yes
11:14:54 PM #20 Text 0 File Cdrdrv.cpp, Line 9872
---- Disc Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Revision number of maximum recording speed: -
Revision number of minimum recording speed: -
Revision number table of recording speed: - - - - - - -
Class: 0
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
11:14:54 PM #21 Text 0 File ThreadedTransfer.cpp, Line 269
Pipe memory size 83836800
11:19:07 PM #22 SPTI -1046 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1046)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x2A 00 00 09 50 00 00 00 20 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 30 05
Buffer x00000000: Len x10000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
11:19:07 PM #23 CDR -1046 File Writer.cpp, Line 303
Illegal disc
D: LITE-ON DVDRW LH-20A1S
11:19:08 PM #24 Text 0 File DVDR.cpp, Line 3783
EndDAO: Last written address was 610303 (94FFFh)
11:19:12 PM #25 Phase 34 File dlgbrnst.cpp, Line 1762
Simulation failed at 8x (11,080 KB/s)
11:19:17 PM #26 Text 0 File SCSIPTICommands.cpp, Line 288
SPTI - Error 5 on DismountVolue: Access is denied.
11:19:19 PM #27 Text 0 File Cdrdrv.cpp, Line 11185
DriveLocker: UnLockVolume completed
11:19:19 PM #28 Text 0 File SCSIPTICommands.cpp, Line 424
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon
One thing I'm worried about is when Nero identifies my SATA drive as IDE (This is towards the top @ "Adapter driver: HA 1 "). Also, it lists no Existing drivers.
Thanks.
|
|
Advertisement
|
  |
|
|
AfterDawn Addict
|
19. July 2007 @ 01:44 |
Link to this message
|
Quote: DiskPeripheral : IOMEGA ZIP 100 atapi Port 0 ID 1 DMA: Off
DiskPeripheral : SAMSUNG HD403LJ nvata64 Port 2 ID 0 DMA: Off
CdRomPeripheral : LITE-ON DVDRW LH-20A1S nvata64 Port 2 ID 2 DMA: Off
OtherPeripheral : SI Pseudo Device 0000 Si3531 Port 4 ID 31 DMA: Off
CdRomPeripheral : SM1221P MMB551Y 1.0 ar8t9m4b Port 5 ID 0 DMA: Off
DMA needs to be on, heres a guide to turn back on
http://forums.afterdawn.com/thread_view.cfm/260038
|
|
ARcanUS
Newbie
|
19. July 2007 @ 02:15 |
Link to this message
|
|
No such option is available for SATA drives, which is what my DVDRAM drive is at.
|
Senior Member
|
19. July 2007 @ 18:04 |
Link to this message
|
nasayin
|
|
Advertisement
|
  |
|
|
ARcanUS
Newbie
|
19. July 2007 @ 18:34 |
Link to this message
|
|
|
|