|
|
|
"No seek complete" eror on Nero
|
|
|
dave_1234
Newbie
|
12. August 2007 @ 12:28 |
Link to this message
|
Hello ,
When I try to burn a DVD i get this - "no seek comlete"
what is the problem?
I use the same disks I use before , the same drive , the same driver , so.....?
and if I try to burn a CD on the drive - it's all good and no eror is given.
I have a NEC 3550A, and I use nero 2.0.0.28
can someone help me???
thx!!!!
|
|
Advertisement
|
 |
|
|
Moderator
|
13. August 2007 @ 16:10 |
Link to this message
|
Hi dave_1234
Post the Nero log just be sure to edit out the serial # - begins w/ 1A, 1C or 5C.
If you didn't save the log here's a how to find and post one - link
|
|
dave_1234
Newbie
|
14. August 2007 @ 23:41 |
Link to this message
|
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:34
Nero Version: 6.6.0.8 (Nero Express)
Recorder: Version: 1.F3 - HA 0 TA 0 - 6.6.0.8
Adapter driver: HA 0
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: Version: 1.F3 - HA 0 TA 0 - 6.6.0.8
Adapter driver: HA 0
=== Scsi-Device-Map ===
CdRomPeripheral : MAD DOG MD-16X2DVD9-8X atapi Port 0 ID 0 DMA: On
CdRomPeripheral : SONY CD-RW CRX230ED atapi Port 0 ID 1 DMA: On
DiskPeripheral : SAMSUNG SP0812C atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
MAD DOG MD-16X2DVD9-8X D: CDRom0
SONY CD-RW CRX230ED H: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523500kB)
Free physical memory: 130MB (133608kB)
Memory in use : 74 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
15.8.2007
ISO compilation
10:38:09 #1 Text 0 File Isodoc.cpp, Line 6172
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
10:38:09 #2 Text 0 File Reader.cpp, Line 127
Reader running
10:38:09 #3 Text 0 File Writer.cpp, Line 122
Writer MAD DOG MD-16X2DVD9-8X running
10:38:09 #4 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)
10:38:09 #5 Text 0 File Burncd.cpp, Line 3153
Turn on Disc-At-Once, using DVD media
10:38:09 #6 Text 0 File DlgWaitCD.cpp, Line 259
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2148191 (477:22.41, 4195MB)
10:38:09 #7 Text 0 File DlgWaitCD.cpp, Line 271
Write in overburning mode: NO (enabled: CD DVD)
10:38:09 #8 Text 0 File DlgWaitCD.cpp, Line 2316
Recorder: MAD DOG MD-16X2DVD9-8X, Media type: DVD-R
Disc Manufacturer: INFOME - DIAR20
Disc Application Code: 64, Disc Physical Code: 193
10:38:09 #9 Text 0 File DlgWaitCD.cpp, Line 433
>>> Protocol of DlgWaitCD activities: <<<
=========================================
10:38:09 #10 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2148192 (2148192) = #2148192/477:22.42
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2148192 blocks [MAD DOG MD-16X2DVD9-8X]
--------------------------------------------------------------
10:38:09 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [MAD DOG MD-16X2DVD9-8X] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4399497216, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2148192 | lead-out | 1 | 0x41 | 0x00
10:38:09 #12 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
10:38:09 #13 Text 0 File Burncd.cpp, Line 4040
Cache writing successful.
10:38:09 #14 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
10:38:09 #15 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 6x (8,310 KB/s)
10:38:10 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
10:38:10 #17 Text 0 File DVDR.cpp, Line 2194
Recording mode: Sequential Recording Mode
10:38:10 #18 Text 0 File Mmc.cpp, Line 21235
Set BUFE: Buffer underrun protection -> ON
10:38:10 #19 Text 0 File DVDR.cpp, Line 2340
Start write address at LBA 0
DVD high compatibility mode: Yes
10:38:10 #20 Text 0 File Cdrdrv.cpp, Line 8430
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
10:38:11 #21 Text 0 File Cdrdrv.cpp, Line 1287
10:38:11.625 - MAD DOG MD-16X2DVD9-8X\H0 T0 : Queue again later
10:39:33 #22 SCSI -1093 File Cdrdrv.cpp, Line 1435
SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x03450000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x02
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x0B 0x80 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x02 0x00
10:39:33 #23 CDR -1093 File Writer.cpp, Line 311
No seek complete
10:39:34 #24 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
10:39:34 #25 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
10:39:34 #26 Text 0 File DVDR.cpp, Line 2603
EndDAO: Last written address was 2943
10:39:38 #27 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 6x (8,310 KB/s)
Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 19/05/2006 23:16:24
File 'Drivers\PXHELP20.SYS': Ver=3.00.56a, size=43528 bytes, created 08/03/2007 01:51:00 (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 03/08/2004 22:59:44 (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
Moderator
|
15. August 2007 @ 15:06 |
Link to this message
|
Ok here's some suggestions:
What brand of discs are you using? Brand name use different manufacturers so you can get a new one with each spindle you buy.
The ones you have now are made by Disc Manufacturer: INFOME - DIAR20 Not one of the better compatible manufacturers.
Try different media like Verbatim, Taiyo Yuden or made in Japan Sony, Fuji or Maxell. The no seek complete can be caused by media.
File 'Drivers\CDRALW2K.SYS
Roxio and Nero don't always play well together though if you've had Roxio installed for awhile and had no problems using Nero this might not be the case here. You can try uninstalling it and running the zap tool.
Nero can use an update too - probably not causing this problem but ner has you're drive listed as generic - Connected to MMC as unknown drive with class-nr : 1
Update package 1 - 6.6.1.15
|
|
dave_1234
Newbie
|
16. August 2007 @ 05:18 |
Link to this message
|
waht is Roxio?
I don't think I hed this program ever
so should I install fron the link you gave me?
I will update Nero - and I'll try again
And about the discs - I use SIlverline (there are 25 in a box , and I used 10 before - and there were no problems)
but if you say I will bring from a friend sony \Verbatim\Maxell
and I'll try again.
|
Moderator
|
16. August 2007 @ 14:48 |
Link to this message
|
Roxio is a burning sofware like Nero - it can also be under the name of Sonic, Record Now that come to mind. The Roxio driver is also used by I think WinAmp.
Yep bum one of those from a friend to rule out media.
|
|
dave_1234
Newbie
|
17. August 2007 @ 02:01 |
Link to this message
|
|
So shuold I try to burn with Roxio?
|
Moderator
|
17. August 2007 @ 12:43 |
Link to this message
|
No - If you have a Roxio product installed the 2 (roxio & nero) don't always play well together.
So try the different media 1st.
Try the good free burning program - ImgBurn.
If you are burning non iso (image) files use the build mode to add them - guide
|
|
dave_1234
Newbie
|
23. August 2007 @ 05:04 |
Link to this message
|
I dont know why but I wanted to burn other files in the same disks that I have and then we gave me that massage
PMA updata failure (this time he ejected the disk after burning 4%)
this is the log file
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 13:54:32
NT-SPTI used
Nero Version: 6.6.1.15
Internal Version: 6, 6, 1, 15
(Nero Express)
Recorder: Version: 1.F3 - HA 1 TA 0 - 6.6.1.15
Adapter driver: HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: Version: 1.F3 - HA 1 TA 0 - 6.6.1.15
Adapter driver: HA 1
=== Scsi-Device-Map ===
CdRomPeripheral : MAD DOG MD-16X2DVD9-8X atapi Port 0 ID 0 DMA: On
CdRomPeripheral : SONY CD-RW CRX230ED atapi Port 0 ID 1 DMA: On
DiskPeripheral : SAMSUNG SP0812C atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
MAD DOG MD-16X2DVD9-8X D: CDRom0
SONY CD-RW CRX230ED H: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523500kB)
Free physical memory: 256MB (262492kB)
Memory in use : 49 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
23.8.2007
ISO compilation
15:57:02 #1 Text 0 File SCSIPTICommands.cpp, Line 403
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
15:57:03 #2 Text 0 File Isodoc.cpp, Line 6494
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
15:57:03 #3 ISO9660GEN -11 File geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
15:57:03 #4 Text 0 File Burncd.cpp, Line 3316
Turn on Disc-At-Once, using DVD media
15:57:03 #5 Text 0 File DlgWaitCD.cpp, Line 281
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2149055 (477:34.05, 4197MB)
15:57:03 #6 Text 0 File DlgWaitCD.cpp, Line 293
Write in overburning mode: NO (enabled: CD DVD)
15:57:03 #7 Text 0 File DlgWaitCD.cpp, Line 2616
Recorder: MAD DOG MD-16X2DVD9-8X, Media type: DVD-R
Disc Manufacturer: INFOME - DIAR20
Disc Application Code: 64, Disc Physical Code: 193
15:57:03 #8 Text 0 File DlgWaitCD.cpp, Line 459
>>> Protocol of DlgWaitCD activities: <<<
=========================================
15:57:03 #9 Text 0 File ThreadedTransferInterface.cpp, Line 814
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2149056 (2149056) = #2149056/477:34.6
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2149056 blocks [MAD DOG MD-16X2DVD9-8X ]
--------------------------------------------------------------
15:57:03 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1013
Prepare recorder [MAD DOG MD-16X2DVD9-8X] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4401266688, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2149056 | lead-out | 1 | 0x41 | 0x00
15:57:03 #11 Text 0 File SCSIPTICommands.cpp, Line 208
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
15:57:03 #12 Phase 24 File dlgbrnst.cpp, Line 1685
Caching of files started
15:57:03 #13 Text 0 File Burncd.cpp, Line 4158
Cache writing successful.
15:57:03 #14 Phase 25 File dlgbrnst.cpp, Line 1685
Caching of files completed
15:57:03 #15 Phase 36 File dlgbrnst.cpp, Line 1685
Burn process started at 8x (11,080 KB/s)
15:57:03 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2717
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
15:57:03 #17 Text 0 File DVDR.cpp, Line 2846
Recording mode: Sequential Recording Mode
15:57:03 #18 Text 0 File DVDR.cpp, Line 3002
Start write address at LBA 0
DVD high compatibility mode: Yes
15:57:03 #19 Text 0 File Cdrdrv.cpp, Line 8737
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
15:57:05 #20 Text 0 File Cdrdrv.cpp, Line 1224
15:57:05.375 - D: MAD DOG MD-16X2DVD9-8X : Queue again later
15:58:00 #21 SPTI -1194 File SCSIPassThrough.cpp, Line 178
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1194)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x04
CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 73 04
Buffer x26020040: Len x10000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
15:58:00 #22 CDR -1194 File Writer.cpp, Line 281
PMA update failure
D: MAD DOG MD-16X2DVD9-8X
15:58:01 #23 Text 0 File DVDR.cpp, Line 3246
EndDAO: Last written address was -1
15:58:07 #24 Phase 38 File dlgbrnst.cpp, Line 1685
Burn process failed at 8x (11,080 KB/s)
15:58:08 #25 Text 0 File SCSIPTICommands.cpp, Line 253
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
15:58:13 #26 Text 0 File Cdrdrv.cpp, Line 9945
DriveLocker: UnLockVolume completed
15:58:13 #27 Text 0 File SCSIPTICommands.cpp, Line 403
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=3.00.56a, size=43528 bytes, created 08/03/2007 01:51:00 (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
what is the problem now?
|
Moderator
|
23. August 2007 @ 12:55 |
Link to this message
|
|
Ok I see your still using the same discs. PMA error can also be caused by the media you are using.
Have you tried other media yet?
|
|
dave_1234
Newbie
|
1. September 2007 @ 00:15 |
Link to this message
|
Yes I tried
and I still can't
it's said now -
Power cakibration error
and this is the log file
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 13:54:32
NT-SPTI used
Nero Version: 6.6.1.15
Internal Version: 6, 6, 1, 15
(Nero Express)
Recorder: <MAD DOG MD-16X2DVD9-8X> Version: 1.F3 - HA 1 TA 0 - 6.6.1.15
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <MAD DOG MD-16X2DVD9-8X >Version: 1.F3 - HA 1 TA 0 - 6.6.1.15
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
CdRomPeripheral : MAD DOG MD-16X2DVD9-8X atapi Port 0 ID 0 DMA: On
CdRomPeripheral : SONY CD-RW CRX230ED atapi Port 0 ID 1 DMA: On
DiskPeripheral : SAMSUNG SP0812C atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
MAD DOG MD-16X2DVD9-8X D: CDRom0
SONY CD-RW CRX230ED H: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523500kB)
Free physical memory: 180MB (185320kB)
Memory in use : 64 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
1.9.2007
ISO compilation
11:09:48 #1 Text 0 File SCSIPTICommands.cpp, Line 403
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
11:09:48 #2 Text 0 File Isodoc.cpp, Line 6494
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
11:09:48 #3 ISO9660GEN -11 File geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
11:09:48 #4 Text 0 File Burncd.cpp, Line 3316
Turn on Disc-At-Once, using DVD media
11:09:49 #5 Text 0 File DlgWaitCD.cpp, Line 281
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2148191 (477:22.41, 4195MB)
11:09:49 #6 Text 0 File DlgWaitCD.cpp, Line 293
Write in overburning mode: NO (enabled: CD DVD)
11:09:49 #7 Text 0 File DlgWaitCD.cpp, Line 2616
Recorder: MAD DOG MD-16X2DVD9-8X, Media type: DVD-R
Disc Manufacturer: TYG02 -
Disc Application Code: 64, Disc Physical Code: 193
11:09:49 #8 Text 0 File DlgWaitCD.cpp, Line 459
>>> Protocol of DlgWaitCD activities: <<<
=========================================
11:09:49 #9 Text 0 File ThreadedTransferInterface.cpp, Line 814
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2148192 (2148192) = #2148192/477:22.42
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2148192 blocks [MAD DOG MD-16X2DVD9-8X ]
--------------------------------------------------------------
11:09:49 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1013
Prepare recorder [MAD DOG MD-16X2DVD9-8X] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4399497216, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2148192 | lead-out | 1 | 0x41 | 0x00
11:09:49 #11 Text 0 File SCSIPTICommands.cpp, Line 208
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
11:09:49 #12 Phase 24 File dlgbrnst.cpp, Line 1685
Caching of files started
11:09:49 #13 Text 0 File Burncd.cpp, Line 4158
Cache writing successful.
11:09:49 #14 Phase 25 File dlgbrnst.cpp, Line 1685
Caching of files completed
11:09:49 #15 Phase 36 File dlgbrnst.cpp, Line 1685
Burn process started at 6x (8,310 KB/s)
11:09:49 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2717
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
11:09:49 #17 Text 0 File DVDR.cpp, Line 2846
Recording mode: Sequential Recording Mode
11:09:49 #18 Text 0 File DVDR.cpp, Line 3002
Start write address at LBA 0
DVD high compatibility mode: Yes
11:09:49 #19 Text 0 File Cdrdrv.cpp, Line 8737
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
11:09:50 #20 Text 0 File Cdrdrv.cpp, Line 1224
11:09:50.421 - D: MAD DOG MD-16X2DVD9-8X : Queue again later
11:10:47 #21 SPTI -1106 File SCSIPassThrough.cpp, Line 178
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1106)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 73 03
Buffer x073f0040: Len x10000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
11:10:47 #22 CDR -1106 File Writer.cpp, Line 281
Power calibration error
D: MAD DOG MD-16X2DVD9-8X
11:10:47 #23 Text 0 File DVDR.cpp, Line 3246
EndDAO: Last written address was -1
11:10:54 #24 Phase 38 File dlgbrnst.cpp, Line 1685
Burn process failed at 6x (8,310 KB/s)
11:10:54 #25 Text 0 File SCSIPTICommands.cpp, Line 253
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
11:10:56 #26 Text 0 File Cdrdrv.cpp, Line 9945
DriveLocker: UnLockVolume completed
11:10:56 #27 Text 0 File SCSIPTICommands.cpp, Line 403
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=3.00.56a, size=43528 bytes, created 08/03/2007 01:51:00 (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
Moderator
|
1. September 2007 @ 06:51 |
Link to this message
|
Ok here's a blurb from Nero on the power calibration error - it says cd but applies to dvds also.
You've tried different media and the firmware is up to date so try the other suggestions.
I would also 1st try cleaning the lens of the drive with either blowing some canned air or using a dvd lens cleaner.
I get a 'Power calibration error' or 'Calibration area (almost) full' error message. Why?
Power Calibration is controlled by the recorder.
Before any write operation, all recorders must do a 15 step power test to determine the optimum power for writing to the CD; this is called "Optimum Power Calibration"(OPC). During the write, it continues to do this test to get the best write throughout the whole CD; this is called "Running Optimum Power Calibration" (ROPC).
This whole process is controlled by the recorder, though initiated by programs such as Nero. There is an area on the inner part of the CD for the test and test data info to be stored. You can use this area up to 999 times.
If you receive the "Power calibration error" or "Power calibration area is (amost) full" error message, the cause will be either poor media, poor power, or a defective recorder.
Please try the following solutions:
* Update the firmware of your recorder. Please check the manufacturer's website for the latest version.
* Try another brand of CD-R or CD-RW media.
* Try different power connectors, and for recorders, do not share power with other devices. It needs its own power connector. If the error occurs with an external recorder, the power source in the chassis could be the cause. As a test, try to take the recorder out of the external chassis and connect it internal.
* Try different configurations, such as taking the CD-ROM to the primary IDE bus as slave and have only the recorder connected to the secondary IDE bus as master.
* Send the recorder in for service.
|
|
dave_1234
Newbie
|
7. September 2007 @ 06:20 |
Link to this message
|
Now I tried a different media of DVD and also from DVD+R and not
DVD-R like before
and this time it burn!!!!
so I have a new question now:
Do I need to use only DVD+R disks? ,
or can I use the same media foor DVD-R disk?
(this is becuase they sale the disks in packs of 20)
thx!
|
Moderator
|
7. September 2007 @ 06:33 |
Link to this message
|
|
If +R are working I'd stick with those but it really shouldn't make a diff.
Which brand did you buy? Different brands use different manufacturers so these +R may be more compatible with the drive.
|
|
dave_1234
Newbie
|
8. September 2007 @ 05:45 |
Link to this message
|
I bought "TEAC" DVD+R 8X
so u say- "if it's work dont fix it" - and use these for now?
|
Moderator
|
8. September 2007 @ 06:29 |
Link to this message
|
I would.
ID who actually made these to get a better idea of which media to buy.
Pop a disc in the drive then open Nero and go to ToolKit>CD-DVD Speed.
Click on the disc info tab and the manufacturer will be listed there.
|
|
dave_1234
Newbie
|
10. September 2007 @ 04:18 |
Link to this message
|
|
It say - Unknown
I will use it for now
thx! - for everything!
good day!
|
Moderator
|
10. September 2007 @ 10:13 |
Link to this message
|
|
Not a problem.
You might have a problem with these since the drive can't id them - usually means the media code is not in the drives firmware. Doesn't always mean it will fail so looks like your good for now.
If it does try the media in my post above - they're usually pretty compatible w/ the different drives.
|
|
Advertisement
|
|
|
Moderator
|
10. September 2007 @ 10:13 |
Link to this message
|
|
edit - dup post :)
This message has been edited since posting. Last time this message was edited on 10. September 2007 @ 10:15
|
|
