|
|
|
Unrecoverable read error at LBA 75808.. PLEASE HELP!!!
|
|
|
140205
Newbie
|
22. September 2007 @ 09:06 |
Link to this message
|
Its driving me mad.. for a while now all my burns fail and say "burn process failed at..." i've tried all the speeds and nothing works. I got told to look at my primary ide and it says my current transfer mode in device 0 is "ultra DMA mode 6" and my device 1's curent transfer mode is not applicable. MY secondary ide channel device 0 says mode 5 and my device 1 is mode 2.
It is not my drive as it was working fine for a bit and then it kept giving error messages so i tried buying a new one and it still says the same.
I dont understand this but my error log for one of them was
Windows XP 5.1
IA32
WinAspi: -
NT-SPTI used
Nero Version: 7.10.1.0
Internal Version: 7, 10, 1, 0
(Nero Express)
Recorder: <LITE-ON DVDRW LH-20A1P> Version: KL0N - HA 1 TA 1 - 7.10.1.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <DVD-ROM 16X >Version: 5.FV - HA 1 TA 0 - 7.10.1.0
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y080L0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : DVD-ROM 16X atapi Port 1 ID 0 DMA: On
CdRomPeripheral : LITE-ON DVDRW LH-20A1P atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
DVD-ROM 16X D: CdRom0
LITE-ON DVDRW LH-20A1P E: CdRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 70254592 (0) Byte
BUFE : 0
Physical memory : 479MB (490864kB)
Free physical memory: 259MB (265992kB)
Memory in use : 45 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
22.9.2007
DVD-Copy on the fly
17:41:17 #1 Text 0 File SCSIPTICommands.cpp, Line 424
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
17:41:19 #2 Text 0 File SCSIPTICommands.cpp, Line 424
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
17:41:19 #3 Text 0 File SCSIPTICommands.cpp, Line 215
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME
17:41:19 #4 Text 0 File DVDCopy.cpp, Line 320
DVD Track-Information from source disc:
Media Type: DVD-R
S01 T01 Con 0x14 Start 0 Len 1019344 NWA -1 (gap 0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0)
17:41:19 #5 Text 0 File DVDCopy.cpp, Line 435
Max -1 tracks of 1 allowed to copy
1: 0 - 1019344 = 1019344, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)
17:41:20 #6 Text 0 File Burncd.cpp, Line 3508
Turn on Disc-At-Once, using DVD media
17:41:20 #7 Text 0 File DlgWaitCD.cpp, Line 307
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1019343 (226:31.18, 1990MB)
17:41:20 #8 Text 0 File DlgWaitCD.cpp, Line 319
Write in overburning mode: NO (enabled: CD)
17:41:20 #9 Text 0 File DlgWaitCD.cpp, Line 2972
Recorder: LITE-ON DVDRW LH-20A1P, Media type: DVD-R
Disc Manufacturer: TTH01 -
Disc Application Code: 64, Disc Physical Code: 193
17:41:20 #10 Text 0 File DlgWaitCD.cpp, Line 493
>>> Protocol of DlgWaitCD activities: <<<
=========================================
17:41:20 #11 Text 0 File ThreadedTransferInterface.cpp, Line 793
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - Data (mode 1))
2 indices, index0 (150) not provided
original disc pos #0 + 1019344 (1019344) = #1019344/226:31.19
not relocatable, disc pos for caching/writing not required/not required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1019344 blocks [E: LITE-ON DVDRW LH-20A1P]
--------------------------------------------------------------
17:41:20 #12 Text 0 File ThreadedTransferInterface.cpp, Line 995
Prepare [E: LITE-ON DVDRW LH-20A1P] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 2087616512, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 1019344 | 1019344 | 0x00
1019344 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
17:41:20 #13 Text 0 File SCSIPTICommands.cpp, Line 215
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME
17:41:20 #14 Text 0 File Burncd.cpp, Line 4294
Caching options: cache CDRom or Network-No, small files-No (<64KB)
17:41:20 #15 Phase 36 File dlgbrnst.cpp, Line 1762
Burn process started at 2x (2,770 KB/s)
17:41:21 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2721
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
17:41:21 #17 Text 0 File DVDR.cpp, Line 3225
Recording mode: Sequential Recording Mode
17:41:21 #18 Text 0 File DVDR.cpp, Line 3381
Start write address at LBA 0
DVD high compatibility mode: Yes
17:41:21 #19 Text 0 File Cdrdrv.cpp, Line 9872
---- Disc Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Revision number of maximum recording speed: -
Revision number of minimum recording speed: -
Revision number table of recording speed: - - - - - - -
Class: 0
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
17:41:21 #20 Text 0 File ThreadedTransfer.cpp, Line 269
Pipe memory size 70192000
17:41:54 #21 Text 0 File Cdrdrv.cpp, Line 1352
17:41:54.562 - E: LITE-ON DVDRW LH-20A1P : Queue again later
17:44:43 #22 SPTI -1128 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1128)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x00
CDB Data: 0x28 00 00 01 28 20 00 00 20 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 11
Buffer x07e33980: Len x10000
17:44:43 #23 TRANSFER -25 File Reader.cpp, Line 270
Error reading data
17:44:43 #24 Text 0 File Reader.cpp, Line 273
Exception value: -1128
17:44:43 #25 CDCOPY -12 File DVDReader.cpp, Line 148
Unrecoverable read error at
LBA 75808
17:51:04 #26 Text 0 File DVDR.cpp, Line 3783
EndDAO: Last written address was 41951 (A3DFh)
17:51:07 #27 Phase 38 File dlgbrnst.cpp, Line 1762
Burn process failed at 2x (2,770 KB/s)
17:51:09 #28 Text 0 File SCSIPTICommands.cpp, Line 261
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
17:52:09 #29 Text 0 File SCSIPTICommands.cpp, Line 424
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
17:52:09 #30 Text 0 File Cdrdrv.cpp, Line 11185
DriveLocker: UnLockVolume completed
17:52:10 #31 Text 0 File SCSIPTICommands.cpp, Line 261
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
17:52:12 #32 Text 0 File Cdrdrv.cpp, Line 11185
DriveLocker: UnLockVolume completed
17:52:12 #33 Text 0 File SCSIPTICommands.cpp, Line 424
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
PLEASE HELP!!!!
|
Moderator
|
22. September 2007 @ 10:04 |
Link to this message
|
Hi 140205
Turn off DVD-copy on the fly.
The error you getting is because somethings up with the source disc you are trying to copy from.
Copy on the fly does ripping & burning in real time so any little glitch in the reading and bam fails and you have a coaster.
Check the back of the disc also for any dirt, scratches or smudges and try cleaning it off w/ something non abrasive in a non circular motion.
Try using the LiteOn to read and burn it. It may do a better job then the DVD-Rom drive.
Take the burn speed up to 4x or 8x - 2x is a bit to slow.
|
|
