|
Starviw PVR Hard Drive Installation
|
|
|
mrsgizmo
Account closed as per user's own request
|
28. September 2007 @ 02:14 |
Link to this message
|
Hi
I've just bought a Starview PVR which is working great apart from I can not get the thing to format the hard drive so I can use the PVR function.
I have put the thing in and turned it on whilst pressing menu as told to in the instructions but nothing. I have stood their doing it for over 10 mins each time I try but just get the moving line.
I have checked it is switched to master on the hard drive and it wasn't so changed it and tried again but had no luck. The guy I bought it off (Skywonder) isn't replying to my emails. Can anyone give any advice?
|
|
Advertisement
|
|
|
|
AfterDawn Addict
|
28. September 2007 @ 02:37 |
Link to this message
|
|
I have sent you info.
|
|
nick32
Newbie
|
28. September 2007 @ 06:49 |
Link to this message
|
|
Hi,
I'm having a different problem with formatting of HDD
The format starts after powering up and holding menu, but gets to 48% and then resets to 1%. This then loops...
I've powered off/on a number of times and no change :(
any help gratefully received
nick
|
AfterDawn Addict
|
28. September 2007 @ 06:56 |
Link to this message
|
|
I have sent you info relating to this.
|
|
LastCuban
Newbie
|
28. September 2007 @ 07:48 |
Link to this message
|
sc0user, Could you send me info on this also. I had a similar prob with a 80G hitachi drive I got with the pvr. It worked ok with a 200G Seagate. Thanks.
|
AfterDawn Addict
|
28. September 2007 @ 07:52 |
Link to this message
|
|
Done
This message has been edited since posting. Last time this message was edited on 28. September 2007 @ 07:53
|
|
mjhopwo1
Newbie
|
20. October 2007 @ 17:33 |
Link to this message
|
|
Hi, I have the exact same problem, anybody got any advice for me?
I desperately want to record tonight :/
|
|
notaclue2
Newbie
|
24. November 2007 @ 13:31 |
Link to this message
|
Originally posted by nick32:
Hi,
I'm having a different problem with formatting of HDD
The format starts after powering up and holding menu, but gets to 48% and then resets to 1%. This then loops...
I've powered off/on a number of times and no change :(
any help gratefully received
nick
I am having exactly the same problem, I have a maxtor ide 320gb
Any help plz
|
|
nick32
Newbie
|
24. November 2007 @ 15:29 |
Link to this message
|
|
Although I had other problems and have now returned the PVR for repair/exchange, this issue was solved by turning the HDD cable the other way around (ie swapping ends)
|
|
notaclue2
Newbie
|
24. November 2007 @ 18:01 |
Link to this message
|
|
That was the first thing I tried was turing the leads about but nothing, I have also tried changing the jumper pins from slave to master, still nothing, what a nightmare
|
|
kardex
Junior Member
|
25. November 2007 @ 05:44 |
Link to this message
|
|
Hi sc0user,
I have the same problem as nick32 can you pm me the fix.
All the best
kardex
|
|
mjhopwo1
Newbie
|
26. November 2007 @ 05:25 |
Link to this message
|
|
Guys, I toiled for weeks on this and in the end it turned out I needed to get a new HDD, mine was simply not working. No refund from SKYWONDER who sold me this faulty HDD and No reply to any of my messages asking for help. Thought I'd let you know that they have a very poor after sales service so consider buying elswhere if you need to get one of these boxes.
|
|
nick32
Newbie
|
26. November 2007 @ 05:30 |
Link to this message
|
At the time I gave up on the Maxtor too and bought another HDD. However still had issues, and eventually turned the cable around. When I retried the Maxstor, it formatted ok. Both HDD gave problems with recordings etc though, so the PVR has gone back
|
|
notaclue2
Newbie
|
26. November 2007 @ 10:16 |
Link to this message
|
|
Just to let you know, you have to install the latest firmware BEFORE you format the hard drive, aparently this is a common problem with old firmware, the manual that you get with the pvr sucks
|
|
kearnsr
Newbie
|
4. April 2008 @ 16:16 |
Link to this message
|
I just got The Box PVR.
Do you have to update the firmware before you try and reformat the hard drive?
|
|
cf333
Newbie
|
4. April 2008 @ 18:50 |
Link to this message
|
|
I am also having problems with the pvr hard drive. i have had another sent to me but this also is not working. strangely though i have found a 10 year old hard drive(5400 rpm) which worked straight away, but this is only 8GB.
|
|
bunsen
Newbie
|
25. July 2008 @ 16:26 |
Link to this message
|
i have just purchased a Starview PVR and have tried unsuccessfully to format 2 Maxtor HDDs.
all help welcome.
|
|
Advertisement
|
|
|
Senior Member
|
25. July 2008 @ 18:09 |
Link to this message
|
Originally posted by bunsen:
i have just purchased a Starview PVR and have tried unsuccessfully to format 2 Maxtor HDDs.
all help welcome.
hI
Take a look in the link below,in the Starview PVR /Documentation folder. Make sure H/D is set to Master (on the jumper pins) and red line on ribbon cable fits closest to the 4 pin voltage plug. The H/D formats through the Starview's menu system. You need v4.506 firmware installed also in the link and how to. To find your version Menu/System Setup/System Information.
http://eko.4shared.com/
jbvid
This message has been edited since posting. Last time this message was edited on 25. July 2008 @ 18:12
|
