I got all these parts to build a new PC and I know how to connect everything except these little ones coming out of the case. There are connectors that say some stuff on them so I will write what is written on each connector and double space when I go to another connector. Please if some can go to Asus website and downlaod the manual and try to understand this part for me because I can`t find slots on the motherboard that fit it. For example, one plug has 1 row of 4 pins and in the manual, the slot it says to connect it to has 2 rows, one of 4 pins and 1 of 5 pins. So I`ll tell you what the connectors say and if anyone can help me, that would be great. I need to get this PC built by Sunday so I need help fast Thanks.
Here are what the plugs say:
VCC
USB1-
USB1+
GN
(then there is one plug with one pin that says GN)
VCC
USB2-
USB2+
GN
(then there is one plug with one pin that says GN)
PWRSW
H.D.D LED
(tied to it)
POWER LED
(tied to it)
RESET SW
They go at the bottom of the motherboard at the front, you'll see a load of pins sticking out.
Consult the manual for which one goes where, it's pretty obvious.
There are no "slots" so to speak they are pins located "below" your sata connectors next to the blue connectors on the board. Sorry can't downld the manual where I'm at.
Look closely at your board you should see the same markings near the pins as on your connectors. The only one that is really "neccsary" for computer operation is your power switch!
I hope this helps a little
read below please
Originally posted by darkradar: I got all these parts to build a new PC and I know how to connect everything except these little ones coming out of the case. There are connectors that say some stuff on them so I will write what is written on each connector and double space when I go to another connector. Please if some can go to Asus website and downlaod the manual and try to understand this part for me because I can`t find slots on the motherboard that fit it. For example, one plug has 1 row of 4 pins and in the manual, the slot it says to connect it to has 2 rows, one of 4 pins and 1 of 5 pins. So I`ll tell you what the connectors say and if anyone can help me, that would be great. I need to get this PC built by Sunday so I need help fast Thanks.
Here are what the plugs say:
The two below are usb connector
VCC
USB1-
USB1+
GN
(then there is one plug with one pin that says GN), this is a ground plug same as below
VCC
USB2-
USB2+
GN
(then there is one plug with one pin that says GN)
This is your power switch for your case hook it up wrong and no power up! PWRSW
H.D.D LED
(tied to it)
POWER LED
(tied to it)
RESET SW
Remember no matter how much you know someone else knows more than you do!
Fav Quote "Con is the opposite of Pro so CONgress must be the opposite of PROgress!!!!"
