|
|
|
No DMA options in RAID IDE mode
|
|
|
Yakor
Newbie
|
3. October 2007 @ 08:47 |
Link to this message
|
Hello everyone,
I seem to have another problem with my super-(hardware)-setup.
On ASUS P5B Deluxe Wifi/AP I have two Raptors on SATA1 and SATA2 working in RAID0 on Intel ICH8R.
Subject for discussion: Optiarc AD-7170S, which is - as you know SATA, and attached to SATA4 port.
Problem 1: in bios once you select "SATA mode" RAID, you loose all details on physical drives. Meaning I cannot change DMA and PIO for DVD-drive in bios.
Problem 2: since in order to use RAID, Windows installs iastor.sys, the "ATAPI..." node in the device manager is not present.
So all suggestions regarding enabling DMA are not valid for me. Moreover, I cannot even see DMA status in applications.
There are no problems as such, just before booting from DVD PC hangs for 5 seconds, which is a little annoying, but not critical (I don't do system install every day).
Started to think about this (potential) problem after Nero 8 damaged 2 DVD9 +R's during an attempt to create a UDF DVD (write error).
Question: does this matter at all? Shall I look for a solution?
What do you think, experts?
Any opinion appreciated.
--
Yakor
|
|
Advertisement
|
|
|
|
Senior Member
|
4. October 2007 @ 13:53 |
Link to this message
|
Originally posted by Yakor:
Question: does this matter at all? Shall I look for a solution?
No it will not matter.
Post a Nero log for the write error.
|
|
Yakor
Newbie
|
4. October 2007 @ 15:10 |
Link to this message
|
Thanks!
Below is Nero log (full!). Remark: while trying to burn the disks I still had 1.00 firmware (for AD-7170S). After I had upgraded to 1.82, I never tried to re-burn the same compilation (4.5 EUR per try is too expensive in a marginal sense :)
====== *** Nero Burning ROM, History File *** ======
Windows XP 5.1
IA32
WinAspi: -
NT-SPTI used
Nero Version: 8.1.1.0
Internal Version: 8, 1, 1, 0
Recorder: <Optiarc DVD RW AD-7170S> Version: 1.00 - HA 1 TA 0 - 8.1.1.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default
CD-ROM: <Optiarc DVD RW AD-7170S >Version: 1.00 - HA 1 TA 0 - 8.1.1.0
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : RAID0_SYS iaStor Port 0 ID 0 DMA: On
DiskPeripheral : RAID0_DAT iaStor Port 0 ID 1 DMA: Off
CdRomPeripheral : Optiarc DVD RW AD-7170S iaStor Port 0 ID 2 DMA: Off
CdRomPeripheral : HB9101T DDO738M 1.0 ayt774x5 Port 1 ID 0 DMA: Off
=== CDRom-Device-Map ===
Optiarc DVD RW AD-7170S H: CdRom0
HB9101T DDO738M I: CdRom2
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 2047MB (2096204kB)
Free physical memory: 1066MB (1091616kB)
Memory in use : 47
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
2.10.2007
UDF compilation
04:45:33 #1 Text 0 File SCSIPTICommands.cpp, Line 450
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
04:45:33 #2 Text 0 File Isodoc.cpp, Line 6671
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
UDF Mode : pure
UDF Options : automatic
UDF Revision : 1.02
UDF Partition Type : physical
04:45:34 #3 Text 0 File Burncd.cpp, Line 3530
Turn on Disc-At-Once, using DVD media
04:45:35 #4 Text 0 File FilesystemSettingsValidator.cpp, Line 142
FS Settings: using validator 'CUDFSettingsValidatorDVD'
ParamMode = 'automatic', changing UDF partition type from 'physical' to 'physical'
Changing UDF revision from '1.02' to '1.02'
04:45:35 #5 Text 0 File DlgWaitCD.cpp, Line 307
Last possible write address on media: 4173823 (927:30.73, 8151MB)
Last address to be written: 4048351 (899:38.01, 7906MB)
04:45:35 #6 Text 0 File DlgWaitCD.cpp, Line 319
Write in overburning mode: NO (enabled: CD)
04:45:35 #7 Text 0 File DlgWaitCD.cpp, Line 2972
Recorder: Optiarc DVD RW AD-7170S, Media type: DVD+R DL
Disc Manufacturer ID: <RICOHJPN>, Media Type ID: <D01>, Product revision number: 67
Disc Application Code: 0, Extended Information Indicators: 3
04:45:35 #8 Text 0 File DlgWaitCD.cpp, Line 493
>>> Protocol of DlgWaitCD activities: <<<
=========================================
04:45:35 #9 Text 0 File ThreadedTransferInterface.cpp, Line 785
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 4048352 (4048352) = #4048352/899:38.2
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 4048352 blocks [H: Optiarc DVD RW AD-7170S]
--------------------------------------------------------------
04:45:39 #10 Text 0 File ThreadedTransferInterface.cpp, Line 986
Prepare [H: Optiarc DVD RW AD-7170S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 8291024896, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 4048352 | 0 | 0x00
4048352 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
04:45:39 #11 Text 0 File SCSIPTICommands.cpp, Line 240
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME
04:45:39 #12 Text 0 File Burncd.cpp, Line 4316
Caching options: cache CDRom or Network-Yes, small files-No (<64KB)
04:45:39 #13 Phase 24 File dlgbrnst.cpp, Line 1764
Caching of files started
04:45:39 #14 Text 0 File Burncd.cpp, Line 4435
Cache writing successful.
04:45:39 #15 Phase 25 File dlgbrnst.cpp, Line 1764
Caching of files completed
04:45:39 #16 Phase 36 File dlgbrnst.cpp, Line 1764
Burn process started at 8x (11,080 KB/s)
04:45:39 #17 Text 0 File ThreadedTransferInterface.cpp, Line 2735
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
04:45:39 #18 Text 0 File DVDPlusDualLayer.cpp, Line 671
L0 Data Zone Capacity not set.
Max LBA L0 2086911 (1FD7FFh, 4075MB), next writable address 0 (0h, 0MB)
04:45:39 #19 CDR -1205 File DVDPlusDualLayer.cpp, Line 687
Burning Layer 1
04:45:39 #20 Text 0 File DVDPlusDualLayer.cpp, Line 697
Start writing layer 1 at address 0 (0h)
Recording mode: unknown Recording Mode
04:45:39 #21 Text 0 File Cdrdrv.cpp, Line 10026
---- Disc Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-ROM (0), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 2, Track Path: Opposite Track Path (OTP), Layer Type: recordable
Linear Density: 0,293 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: FCFFFF h
End Physical Sector Number in Layer 0: 22D7FF h (LBN: 1FD7FF h, 4075 MB)
Data in Burst Cutting Area (BCA) does not exist
Twin Format Flag: 0
Media Specific [16..783]:
00 00 03 52 49 43 4F 48 - 4A 50 4E 44 30 31 43 40 ...RICOHJPND01C@
25 25 37 10 00 2C 6C 00 - 2C 6C 20 1F 0C 0C 14 14 %7..,l.,l......
02 01 01 20 00 20 1F 0C - 0C 14 14 02 01 01 20 00 ................
04 00 33 7B 5C 00 25 69 - 3A 26 1C 0A 0B 20 02 01 ..3{\.65001:&......
01 00 00 58 62 42 26 1C - 0A 0B 20 02 01 01 00 5F ...XbB&........_
84 00 00 43 66 3E 26 1C - 0A 0B 20 02 01 01 00 00 ...Cf>&.........
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
E1 0F 32 10 00 03 00 00 - 00 FC FF FF 00 22 D7 FF ..2.........."..
00 00 03 52 49 43 4F 48 - 4A 50 4E 44 30 31 43 40 ...RICOHJPND01C@
25 25 37 15 00 34 6E 00 - 34 6E 1A 1A 0C 0C 0E 0E %7..4n.4n......
00 00 00 10 00 1A 1A 0C - 0C 0E 0E 00 00 00 10 00 ................
04 00 33 7B 5C 00 33 66 - 40 19 10 05 04 10 00 00 ..3{\.3f@.......
00 00 00 55 6A 32 24 16 - 09 08 20 00 00 00 00 05 ...Uj2$.........
84 00 00 48 6E 28 24 16 - 09 08 20 00 00 00 00 00 ...Hn($.........
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
04:45:39 #22 Text 0 File DVDR.cpp, Line 6748
Drive: Optiarc DVD RW AD-7170S
Book Type request [NEC]: DVD-ROM, write to RAM
select Book Type setting from RAM
Changing the Book Type was finished successfully, return code 0
04:45:39 #23 CDR -1207 File DVDR.cpp, Line 6452
Book Type automatically set to: DVD-ROM
04:45:39 #24 Text 0 File DVDPlusRW.cpp, Line 675
Start write address at LBA 0
DVD high compatibility mode: No
04:45:39 #25 Text 0 File ThreadedTransfer.cpp, Line 268
Pipe memory size 83836800
04:54:35 #26 SPTI -1135 File SCSIPassThrough.cpp, Line 181
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 00 00 1F CF 40 00 00 20 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 0C
Buffer x0f4237c0: Len x10000
0x2B 76 30 5A 29 0D 6F 28 89 32 0D A1 65 62 53 BD
0x4C AF 64 47 86 F4 DA B6 72 03 90 DE FC AA C1 10
0x2B A4 42 4B F3 35 EE C9 12 F9 B0 1C 16 7B 67 06
04:54:35 #27 CDR -1135 File Writer.cpp, Line 306
Write error
H: Optiarc DVD RW AD-7170S
04:54:36 #28 SPTI -1135 File SCSIPassThrough.cpp, Line 181
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x5B 01 01 00 00 01 00 00 00 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 0C
04:54:36 #29 Text 0 File DVDPlusRW.cpp, Line 935
EndDAO: Last written address 2084672
04:54:36 #30 Text 0 File DVDR.cpp, Line 6748
Drive: Optiarc DVD RW AD-7170S
Book Type request [NEC]: DVD-ROM, write to RAM
select Book Type setting from RAM
Changing the Book Type was finished successfully, return code 0
04:54:36 #31 Phase 38 File dlgbrnst.cpp, Line 1764
Burn process failed at 8x (11,080 KB/s)
04:54:36 #32 Text 0 File SCSIPTICommands.cpp, Line 287
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
04:54:40 #33 Text 0 File Cdrdrv.cpp, Line 11276
DriveLocker: UnLockVolume completed
04:54:40 #34 Text 0 File SCSIPTICommands.cpp, Line 450
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero Burning ROM, History File *** ======
--
Yakor
|
|
zebadee
Member
|
5. October 2007 @ 04:23 |
Link to this message
|
|
Hi ;-)
Not too familar with your mobo.
But a lot of folk have problems with the Intel ICH8R.
For ODD's to work properly you cannot use RAID of any kind.
Doesn't the bios let you select individually?
If you cannot do this, then you would have to consider a PCI SATA controller card.
This shouldn't be necessary as it would be all over the net by now.
|
Senior Member
|
5. October 2007 @ 13:48 |
Link to this message
|
|
This message has been edited since posting. Last time this message was edited on 5. October 2007 @ 13:52
|
|
Yakor
Newbie
|
5. October 2007 @ 18:52 |
Link to this message
|
56delray
Thanks for comments and encouraging.
However, I didn't quite get the cavils from your last post.
You seem to critisize the media I've chosen (quote: "Also the media you have is not the best"). At the same time the link you provide gives the following rating to it:
Plays on 1 DVD Players
Plays not on 0 DVD Players
Burn Reliability is Good
DVD Reliability is Good
PC Reliability is Good
Console Reliability is N/A
Which is the best in the first link among the 13 listed there (together with BENQ, which has absolutely the same qualities as my TDK) and the 3rd among all provided links (yielding only to Verbatim and Dynex, which I've never seen, by the way).
Was it a mistake or did you want to say something else?
Quote:
Trying to burn at the max rate for the media and the writer is your problem.
You might be right. I thought differently, becasue some time ago I've read another materials (numerous), which stated that burning at lower speeds might be even worth. Shall I really stick to this rule?
Quote:
Burn at half the media's rated speed is the rule for burning.
Quote:
If your firmware is old stay away from the max speed on newer meida.
As you have seen, I have 1.82 now, which cannot be newer. Can I burn at max speed from now on?
Still, the question remains: what to do with DMA and shall I really consider an option of buying a third-party RAID card so that to let my SATA Optiarc rest on normal IDE channel?
zebadee
mobo is quite widespread, as well as its problems :)
Quote:
But a lot of folk have problems with the Intel ICH8R.
This is something new to me. This mobo has also a J-Micron RAID controller, which, though, is designed to work with one external SATA drive. Before going to integrated Intel's RAID, I've read thousand of opinions, which helped me decide in favor of ICH8R.
Could you, perhaps, clarify or give links what exactly problems people refer to?
--Yakor
|
|
zebadee
Member
|
6. October 2007 @ 00:15 |
Link to this message
|
|
Hi ;-)
As I said not too familiar with your mobo, only that folk have problems with ICH8R.
Not sure what.
But I do seem to recall that many are told to use the J-Micron RAID controller.
So must be something relating to switching from one to the other.
Anyway I still feel that my understanding that ODD's won't function properly if RAID is selected is correct.
|
|
Yakor
Newbie
|
6. October 2007 @ 05:54 |
Link to this message
|
|
OK guys,
The "DMA-RAID" problem has been partially solved. Found an "original" way out: attached DVD drive to the only on-board connector of J-Micron SATA/PATA controller and set it in AHCI mode.
Now there is no delay when booting from DVD!
However, in device manager, it's DMA 2. And according to some posts in this forum it should be 4. I can't control this in BIOS, since it's now JMicron's responsibility.
Shall I try to burn that unlucky session again?
--
Yakor
|
Senior Member
|
6. October 2007 @ 06:51 |
Link to this message
|
|
Write speeds for the 7170.
DVD+,-R:18x max. DVD-RW:6x max. DVD +RW:8x max. DVD+,-R DL:8x max.
Now say in the future they have 16x DL media.
You still might not want to burn at 8x with a older writer and firmware.
As to the links:
The first link for RICOHJPN D01.
Which is what you have no matter who's name is on the label.
There are 15 comments of poor burn reliabilty, 3 mixed and 7 good.
The next link for MKM003 8x media has 12 good comments.
The last link for MKM01 2.4x media has 6 mixed and 157 good comments.
Of these choices the best results are from the 2.4x DL media.
Now this may be different for other writers.
The worst writers are OEM versions because the firmware is not updated as new media invented.
So good bet would be to burn MKM003 at 4x.
The safe bet would be MKM01 at 1x or 2.4x.
|
|
Yakor
Newbie
|
8. October 2007 @ 13:23 |
Link to this message
|
56delray,
New firmware, another SATA, ISO session, result = the same!
Just spoiled another media.
Followed your advise, recoded at 4x. The stall happens somewhere in the middle. Cannot get to second layer??
I paste the log below. Sent a request to Nero, but they seem to be also puzzled.
What can be worng???
--
Yakor
=======================
Windows XP 6.0
IA32
WinAspi: -
NT-SPTI used
Nero Version: 8.1.1.0
Internal Version: 8, 1, 1, 0
Recorder: <Optiarc DVD RW AD-7170S> Version: 1.82 - HA 1 TA 0 - 8.1.1.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default
CD-ROM: <Optiarc DVD RW AD-7170S >Version: 1.82 - HA 1 TA 0 - 8.1.1.0
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : RAID0_SYS iaStorV Port 0 ID 0 DMA: On
DiskPeripheral : RAID0_DAT iaStorV Port 0 ID 1 DMA: Off
=== CDRom-Device-Map ===
Optiarc DVD RW AD-7170S F: CdRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 2046MB (2095552kB)
Free physical memory: 976MB (999500kB)
Memory in use : 52 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
7.10.2007
ISO compilation
04:27:37 #1 Text 0 File SCSIPTICommands.cpp, Line 450
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
04:27:37 #2 Text 0 File Isodoc.cpp, Line 6671
Iso document burn settings
------------------------------------------
Determine maximum speed : TRUE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
04:27:38 #3 ISO9660GEN -11 File Geniso.cpp, Line 3347
First writeable address = 0 (0x00000000)
04:27:38 #4 Text 0 File Burncd.cpp, Line 3530
Turn on Disc-At-Once, using DVD media
04:27:38 #5 Text 0 File FilesystemSettingsValidator.cpp, Line 142
FS Settings: using validator 'CUDFSettingsValidatorDVD'
ParamMode = 'automatic', changing UDF partition type from 'physical' to 'physical'
Changing UDF revision from '1.02' to '1.02'
04:27:38 #6 Text 0 File DlgWaitCD.cpp, Line 307
Last possible write address on media: 4173823 (927:30.73, 8151MB)
Last address to be written: 4044927 (898:52.27, 7900MB)
04:27:38 #7 Text 0 File DlgWaitCD.cpp, Line 319
Write in overburning mode: NO (enabled: CD)
04:27:38 #8 Text 0 File DlgWaitCD.cpp, Line 2972
Recorder: Optiarc DVD RW AD-7170S, Media type: DVD+R DL
Disc Manufacturer ID: <RICOHJPN>, Media Type ID: <D01>, Product revision number: 67
Disc Application Code: 0, Extended Information Indicators: 3
04:27:38 #9 Text 0 File DlgWaitCD.cpp, Line 493
>>> Protocol of DlgWaitCD activities: <<<
=========================================
04:27:38 #10 Text 0 File ThreadedTransferInterface.cpp, Line 785
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 4044928 (4044928) = #4044928/898:52.28
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 4044928 blocks [F: Optiarc DVD RW AD-7170S]
--------------------------------------------------------------
04:27:49 #11 Text 0 File ThreadedTransferInterface.cpp, Line 986
Prepare [F: Optiarc DVD RW AD-7170S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 8284012544, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 4044928 | 0 | 0x00
4044928 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
04:28:09 #12 Text 0 File SCSIPTICommands.cpp, Line 264
Error on LockVolume: Access is denied.
04:28:09 #13 Text 0 File SCSIPTICommands.cpp, Line 287
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
04:28:10 #14 Text 0 File SCSIPTICommands.cpp, Line 240
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME
04:28:10 #15 Text 0 File Burncd.cpp, Line 4316
Caching options: cache CDRom or Network-Yes, small files-No (<64KB)
04:28:10 #16 Phase 24 File dlgbrnst.cpp, Line 1764
Caching of files started
04:28:10 #17 Text 0 File Burncd.cpp, Line 4435
Cache writing successful.
04:28:10 #18 Phase 25 File dlgbrnst.cpp, Line 1764
Caching of files completed
04:28:10 #19 Phase 28 File dlgbrnst.cpp, Line 1764
Speed measurement started
04:28:10 #20 Text 0 File ThreadedTransferInterface.cpp, Line 2735
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
04:28:10 #21 Text 0 File ThreadedTransfer.cpp, Line 268
Pipe memory size 590400
04:29:40 #22 Text 0 File WriterStatus.cpp, Line 113
<F: Optiarc DVD RW AD-7170S> start writing Lead-Out at LBA 4044928 (3DB880h), length 0 blocks
04:29:40 #23 Phase 29 File dlgbrnst.cpp, Line 1713
Speed measurement completed: 64.8x (89,516 KB/s)
04:29:40 #24 Phase 36 File dlgbrnst.cpp, Line 1764
Burn process started at 4x (5,540 KB/s)
04:29:40 #25 Text 0 File ThreadedTransferInterface.cpp, Line 2735
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
04:29:40 #26 Text 0 File DVDPlusDualLayer.cpp, Line 495
Disc finalized, LBA total Image size: 4044928 (7900MB), Last LBA L0: 2022463 (3950MB)
04:30:11 #27 SPTI -1066 File SCSIPassThrough.cpp, Line 181
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 00 00 00 00 00 00 21 08 04 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24 00 00 C0 00 07
Buffer x0c011100: Len x804
04:30:11 #28 Text 0 File DVDPlusDualLayer.cpp, Line 660
L0 Data Zone Capacity set to 2022464 (1EDC40h, 3950MB) -> OK, confirmed setting
04:30:11 #29 CDR -1205 File DVDPlusDualLayer.cpp, Line 687
Burning Layer 1
04:30:11 #30 Text 0 File DVDPlusDualLayer.cpp, Line 697
Start writing layer 1 at address 0 (0h)
Recording mode: unknown Recording Mode
04:30:11 #31 Text 0 File Cdrdrv.cpp, Line 10026
---- Disc Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R DL (14), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 2, Track Path: Opposite Track Path (OTP), Layer Type: recordable
Linear Density: 0,293 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: FCFFFF h
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 3 h
Disc Manufacturer ID: RICOHJPN
Media type ID: D01
Product revision number: 67
Number of Physical format information bytes in use in ADIP up to byte 63: 64
Media Specific [16..783]:
00 00 03 52 49 43 4F 48 - 4A 50 4E 44 30 31 43 40 ...RICOHJPND01C@
25 25 37 10 00 2C 6C 00 - 2C 6C 20 1F 0C 0C 14 14 %%7..,l.,l......
02 01 01 20 00 20 1F 0C - 0C 14 14 02 01 01 20 00 ................
04 00 33 7B 5C 00 25 69 - 3A 26 1C 0A 0B 20 02 01 ..3{\.%i:&......
01 00 00 58 62 42 26 1C - 0A 0B 20 02 01 01 00 5F ...XbB&........_
84 00 00 43 66 3E 26 1C - 0A 0B 20 02 01 01 00 00 ...Cf>&.........
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
E1 0F 32 10 00 03 00 00 - 00 FC FF FF 00 22 D7 FF ..2.........."..
00 00 03 52 49 43 4F 48 - 4A 50 4E 44 30 31 43 40 ...RICOHJPND01C@
25 25 37 15 00 34 6E 00 - 34 6E 1A 1A 0C 0C 0E 0E %%7..4n.4n......
00 00 00 10 00 1A 1A 0C - 0C 0E 0E 00 00 00 10 00 ................
04 00 33 7B 5C 00 33 66 - 40 19 10 05 04 10 00 00 ..3{\.3f@.......
00 00 00 55 6A 32 24 16 - 09 08 20 00 00 00 00 05 ...Uj2$.........
84 00 00 48 6E 28 24 16 - 09 08 20 00 00 00 00 00 ...Hn($.........
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
04:30:11 #32 Text 0 File DVDR.cpp, Line 6748
Drive: Optiarc DVD RW AD-7170S
Book Type request [NEC]: DVD-ROM, write to RAM
select Book Type setting from RAM
Changing the Book Type was finished successfully, return code 0
04:30:11 #33 CDR -1207 File DVDR.cpp, Line 6452
Book Type automatically set to: DVD-ROM
04:30:11 #34 Text 0 File DVDPlusRW.cpp, Line 675
Start write address at LBA 0
DVD high compatibility mode: Yes
04:30:11 #35 Text 0 File ThreadedTransfer.cpp, Line 268
Pipe memory size 83836800
04:42:17 #36 SPTI -1135 File SCSIPassThrough.cpp, Line 181
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 00 00 1E 92 40 00 00 20 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 0C
Buffer x1dfe3cc0: Len x10000
0x49 78 63 81 78 7A 70 79 9F 18 82 84 7F 86 7B 88
0x08 EC 07 13 40 04 C1 92 94 8C 86 92 89 8E 19 13
0xA0 61 81 98 90 C9 8C 97 8F 91 97 94 19 90 8F 8C
04:42:17 #37 CDR -1135 File Writer.cpp, Line 306
Write error
F: Optiarc DVD RW AD-7170S
04:42:18 #38 SPTI -1135 File SCSIPassThrough.cpp, Line 181
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x5B 01 01 00 00 01 00 00 00 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 0C
04:42:18 #39 SPTI -1176 File SCSIPassThrough.cpp, Line 181
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1176)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x72
Sense Qual: 0x03
CDB Data: 0x5B 01 05 00 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 72 03
04:42:18 #40 Text 0 File DVDPlusRW.cpp, Line 935
EndDAO: Last written address 2003520
04:42:18 #41 Text 0 File DVDR.cpp, Line 6748
Drive: Optiarc DVD RW AD-7170S
Book Type request [NEC]: DVD-ROM, write to RAM
select Book Type setting from RAM
Changing the Book Type was finished successfully, return code 0
04:42:18 #42 CDR -1176 File WriterStatus.cpp, Line 162
Session fixation error
F: Optiarc DVD RW AD-7170S
04:42:18 #43 TRANSFER -24 File WriterStatus.cpp, Line 162
Could not perform end of Disc-at-once
04:42:18 #44 Phase 38 File dlgbrnst.cpp, Line 1764
Burn process failed at 4x (5,540 KB/s)
04:42:18 #45 Text 0 File SCSIPTICommands.cpp, Line 287
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
04:42:22 #46 Text 0 File Cdrdrv.cpp, Line 11276
DriveLocker: UnLockVolume completed
04:42:22 #47 Text 0 File SCSIPTICommands.cpp, Line 450
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon
|
Senior Member
|
9. October 2007 @ 12:26 |
Link to this message
|
Try ImgBurn and slow to 2.4x.
Your writer is still having trouble with the blanks.
Quote:
04:42:17 #36 SPTI -1135 File SCSIPassThrough.cpp, Line 181
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
|
|
Yakor
Newbie
|
10. October 2007 @ 14:06 |
Link to this message
|
Hello,
It seems that something wrong either with the drive or with the media or with their compatibility. In any case, wasted money.
that was the 4th an the last blank from that box.
Burned in imgbirn, at 2.4, buit an iso beforehand. Everything as instructed.
Result below. Any suggestions? Shall I try Fujifilm now (it's the last of my DVD9's stock)
I 23:32:52 ImgBurn Version 2.3.2.0 started!
I 23:32:52 Microsoft Windows Vista Ultimate Edition (6.0, Build 6001 : Service Pack 1, v.275)
I 23:32:52 Total Physical Memory: 2,095,552 KB - Available: 959,252 KB
I 23:32:52 Initialising SPTI...
I 23:32:52 Searching for SCSI / ATAPI devices...
I 23:32:52 Found 1 DVD±RW/RAM!
I 23:32:58 Operation Started!
I 23:32:58 Source File Sectors: 4,084,528 (MODE1/2048)
I 23:32:58 Source File Size: 8,365,113,344 bytes
I 23:32:58 Source File Application Identifier: IMGBURN V2.3.2.0 - THE ULTIMATE IMAGE BURNER!
I 23:32:58 Source File Implementation Identifier: ImgBurn
I 23:32:58 Source File File System(s): ISO9660, UDF (1.02)
I 23:32:58 Destination Device: [4:0:0] Optiarc DVD RW AD-7170S 1.82 (F:) (ATA)
I 23:32:58 Destination Media Type: DVD+R DL (Disc ID: RICOHJPN-D01-67) (Speeds: 2.4x, 4x, 6x, 8x)
I 23:32:58 Destination Media Sectors: 4,173,824
I 23:32:58 Write Mode: DVD
I 23:32:58 Write Type: DAO
I 23:32:58 Write Speed: 2.4x
I 23:32:58 Link Size: Auto
I 23:32:58 Test Mode: No
I 23:32:58 BURN-Proof: Enabled
I 23:32:58 Optimal L0 Data Zone Capacity: 2,042,272
I 23:32:58 Optimal L0 Data Zone Method: ECC Block Boundary
I 23:33:29 Filling Buffer... (40 MB)
I 23:33:30 Writing LeadIn...
I 23:33:31 Writing Image... (LBA: 0 - 4084527)
I 23:33:31 Writing Layer 0... (LBA: 0 - 2042271)
W 23:46:41 Failed to Write Sectors 1242976 - 1243007 - Write Error
W 23:46:41 Retrying (1 of 20)...
W 23:46:42 Retry Failed - Write Error
W 23:46:42 Retrying (2 of 20)...
W 23:46:42 Retry Failed - Write Error
W 23:46:42 Retrying (3 of 20)...
W 23:46:42 Retry Failed - Write Error
W 23:46:42 Retrying (4 of 20)...
W 23:46:42 Retry Failed - Write Error
W 23:46:42 Retrying (5 of 20)...
W 23:46:42 Retry Failed - Write Error
W 23:46:42 Retrying (6 of 20)...
W 23:46:42 Retry Failed - Write Error
W 23:46:42 Retrying (7 of 20)...
W 23:46:42 Retry Failed - Write Error
W 23:46:42 Retrying (8 of 20)...
W 23:46:42 Retry Failed - Write Error
W 23:46:42 Retrying (9 of 20)...
W 23:46:42 Retry Failed - Write Error
W 23:46:42 Retrying (10 of 20)...
W 23:46:42 Retry Failed - Write Error
W 23:46:42 Retrying (11 of 20)...
W 23:46:42 Retry Failed - Write Error
W 23:46:42 Retrying (12 of 20)...
W 23:46:42 Retry Failed - Write Error
W 23:46:42 Retrying (13 of 20)...
W 23:46:42 Retry Failed - Write Error
W 23:46:42 Retrying (14 of 20)...
W 23:46:42 Retry Failed - Write Error
W 23:46:42 Retrying (15 of 20)...
W 23:46:42 Retry Failed - Write Error
W 23:46:42 Retrying (16 of 20)...
W 23:46:42 Retry Failed - Write Error
W 23:46:42 Retrying (17 of 20)...
W 23:46:42 Retry Failed - Write Error
W 23:46:42 Retrying (18 of 20)...
W 23:46:42 Retry Failed - Write Error
W 23:46:42 Retrying (19 of 20)...
W 23:46:42 Retry Failed - Write Error
W 23:46:42 Retrying (20 of 20)...
W 23:46:42 Retry Failed - Write Error
W 23:57:52 Retrying (21)...
W 23:57:52 Retry Failed - Write Error
W 23:57:53 Retrying (22)...
W 23:57:53 Retry Failed - Write Error
W 23:57:54 Retrying (23)...
W 23:57:54 Retry Failed - Write Error
W 23:57:55 Retrying (24)...
W 23:57:55 Retry Failed - Write Error
E 23:58:03 Failed to Write Sectors 1242976 - 1243007 - Write Error
I 23:58:03 Synchronising Cache...
I 23:58:04 Closing Track...
E 23:58:09 Close Track Failed! - Reason: Write Error
I 23:58:09 Closing Track (Last Attempt!)...
E 23:58:09 Close Track Failed! - Reason: Write Error
I 23:58:09 Finalising Disc...
E 23:58:16 Finalise Disc Failed! - Reason: Session Fixation Error - Incomplete Track in Session
I 23:58:16 Finalising Disc (Last Attempt!)...
E 23:58:16 Finalise Disc Failed! - Reason: Session Fixation Error - Incomplete Track in Session
E 23:58:16 Failed to Write Image!
E 23:58:16 Operation Failed! - Duration: 00:25:18
I 23:58:16 Average Write Rate: 1,688 KB/s (1.2x) - Maximum Write Rate: 3,474 KB/s (2.5x)
--
Yakor
|
Senior Member
|
10. October 2007 @ 15:28 |
Link to this message
|
The Fuji might work better depending on the media code.
There are two DVD-9s from Fuji.
One good and one mixed.
You could run the burn thur a Nero Simulation burn and not waste a blank.
Otherwise I am out of ideas.
http://www.videohelp.com/dvdmedia?dvdmed...h+or+List+Media
edit
If it is the good Fuji that you have and it fails the sim, I will seek help for some AfterDawn Addict's.
This message has been edited since posting. Last time this message was edited on 10. October 2007 @ 15:32
|
|
Yakor
Newbie
|
10. October 2007 @ 15:35 |
Link to this message
|
56 delray,
You were right. It's the media. How can it be, whom shall I blame now? TDK? Send them back the media? Or NEC and Sony (or my local shop) requiring a replace of DVD drive?
I'd still like to come back to the original topic: DMA and ATAPI controller.
As I said before, now my AD-7170S is on JMicron SATA/PATA controller in AHCI mode. I tried different combinations: without installing JMicron drivers (in this case CD-ROM was on ATAPI Channel 0, with DMA enabled) and with installing JMicron driver (after this, the DVD drive is recognized as an SCSI device, and DMA option disappears in ATAPI Channel properties window as well as the whole drive moves nowhere, i.e. it is no longer under ATAPI Channel 0)
Many thanks for advises,
--
Yakor
|
|
Yakor
Newbie
|
10. October 2007 @ 16:02 |
Link to this message
|
56delray,
Originally posted by 56delray:
The Fuji might work better depending on the media code.
It did work!!. Media ID "RITEK D01". I checked it thoutoughly with DVDInfo - all perfect.
Originally posted by 56delray:
You could run the burn thur a Nero Simulation burn and not waste a blank.
Otherwise I am out of ideas.
If this was possible!! I wouldn't have wasted so many. Simulation cannot be performed on DVD+R media.
Btw, simulation option is also available in ImgBurn, so Nero is kind of... useless?
--
Yakor
|
|
Advertisement
|
|
|
Senior Member
|
10. October 2007 @ 16:58 |
Link to this message
|
I do not use Nero much so I do not know that about the sim.
I'm old school. I still use Decrypter to burn.
Good luck!
This message has been edited since posting. Last time this message was edited on 10. October 2007 @ 17:07
|
|
