Slimtype DVDRW SOSW-852s - will not burn DVD's

Advertise at AfterDawn.com

Link to us!

Private messages

Compose a private message

List of all updated threads

Threads without replies

Search messages

Friday 10.1.2025 / 22:06

Search AfterDawn Forums:

afterdawn.com > forums > pc hardware > dvd / blu-ray drives > slimtype dvdrw sosw-852s - will not burn dvd's - unspecified target error

Browse by topic

Forums

Start a new thread

Slimtype DVDRW SOSW-852s - will not burn DVD's - unspecified target error

Jump to:

Posted

Message

garphius

Newbie

9. October 2007 @ 07:00

Link to this message

The original Philips DVDRW in my Gateway laptop died, I replaced it with a Slimtype DVDRW SOSW-852s. Now, when I attempt to burn files or any data onto a dvdr-r disc, at the very end of burn, I get the following error message "unspecified target error". The drive can read and play DVD's.

Am using Nero Express 6. DVD's are TDK DVD-R. See Nero log file below. Any help would be greatly appreciated.

4.10.2007
Burn DVD Image
10:09:27 PM #1 Text 0 File Reader.cpp, Line 127
Reader running

10:09:27 PM #2 Text 0 File Writer.cpp, Line 122
Writer Slimtype DVDRW SOSW-852S running

10:09:27 PM #3 IMAGEGEN -10 File ImageGen.cpp, Line 366
Image was written as DAO.
DAOI:
MediaCatalogNumber = ''
TocType = 0x00
Finalized = 1
First/Last Track = 1 / 1
1: ISRC = ''
Blocksize = 2048
TrackMode = 'TRM_DATA_MODE1'
TrackConfig = 0x00
First/Last Index = 0 / 1
Index0FilePos = 0, Index1FilePos = 0, NextTrackFilePos = 344358912
CUES:
0: Ctrl=0x41 Trk= 0 (0x00) Index=00 Start=00:00.00 ( 0) RecDep=0x00
1: Ctrl=0x41 Trk= 1 (0x01) Index=00 Start=00:00.00 ( 0) RecDep=0x00
2: Ctrl=0x41 Trk= 1 (0x01) Index=01 Start=00:00.00 ( 0) RecDep=0x00
3: Ctrl=0x41 Trk=110 (0xAA) Index=01 Start=37:21.69 ( 168144) RecDep=0x00
MTYP: Mediumtype = DVD (old format) (0x1C)
Image file name: <C:\Freds Files\Personal\DVD Burn Image Files\DVD Test Burn 1.nrg>

10:09:27 PM #4 Text 0 File Burncd.cpp, Line 3231
Turn on Disc-At-Once, using DVD media

10:11:14 PM #5 Text 0 File DlgWaitCD.cpp, Line 267
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 168143 ( 37:21.68, 328MB)

10:11:14 PM #6 Text 0 File DlgWaitCD.cpp, Line 279
Write in overburning mode: NO (enabled: CD)

10:11:14 PM #7 Text 0 File DlgWaitCD.cpp, Line 2457
Recorder: Slimtype DVDRW SOSW-852S, Media type: DVD-R
Disc Manufacturer: CMC MA - G. AM3
Disc Application Code: 64, Disc Physical Code: 193

10:11:14 PM #8 Text 0 File DlgWaitCD.cpp, Line 445
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: Unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD+R DL.)

10:11:14 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - DVD-ROM)
2 indices, index0 (150) not provided
original disc pos #0 + 168144 (168144) = #168144/37:21.69
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 168144 blocks [Slimtype DVDRW SOSW-852S]
--------------------------------------------------------------

10:11:14 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [Slimtype DVDRW SOSW-852S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 344358912, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
168144 | lead-out | 1 | 0x41 | 0x00

10:11:15 PM #11 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

10:11:15 PM #12 Text 0 File Burncd.cpp, Line 4116
Cache writing successful.

10:11:15 PM #13 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

10:11:15 PM #14 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 2x (2,770 KB/s)

10:11:15 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 2643
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

10:11:15 PM #16 Text 0 File DVDR.cpp, Line 2340
Recording mode: Sequential Recording Mode

10:11:15 PM #17 Text 0 File Mmc.cpp, Line 21627
Set BUFE: SMART-BURN -> ON , Adapt writespeed to disc : ON

10:11:15 PM #18 Text 0 File DVDR.cpp, Line 2494
Start write address at LBA 0
DVD high compatibility mode: Yes

10:11:15 PM #19 Text 0 File Cdrdrv.cpp, Line 8821
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

10:11:22 PM #20 SCSI -400 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x06AF0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x27
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x27 0x00

10:11:22 PM #21 CDR -400 File Writer.cpp, Line 311
Unspecified target error

10:11:22 PM #22 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

10:11:22 PM #23 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

10:11:22 PM #24 Text 0 File DVDR.cpp, Line 2732
EndDAO: Last written address was -1

10:11:22 PM #25 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 2x (2,770 KB/s)

Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/18/2001 1:07:32 PM
File 'Drivers\CDRALW2K.SYS': Ver=7.1.0.188 , size=24832 bytes, created 11/11/2004 9:30:18 AM
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 11/21/2005 1:48:21 PM
File 'Drivers\PXHELP20.SYS': Ver=2.03.26a, size=20576 bytes, created 5/13/2005 5:54:10 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 9:59:44 PM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero-Burning Rom, History File *** ======
Owner

1A20-0316-0010-2522-5586-6029

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 11/21/2005 1:48:21 PM
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 9/29/2007 12:45:46 PM
Nero Version: 6.6.0.15
Internal Version: 6, 6, 0, 15e
(Nero Express)
Recorder: <Slimtype DVDRW SOSW-852S>Version: PRS9 - HA 1 TA 0 - 6.6.0.15
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <Slimtype DVDRW SOSW-852S >Version: PRS9 - HA 1 TA 0 - 6.6.0.15
Adapter driver: <atapi> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : HTS421280H9AT00 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : Slimtype DVDRW SOSW-852S atapi Port 1 ID 0 DMA: On

=== CDRom-Device-Map ===
Slimtype DVDRW SOSW-852S E: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 958MB (981232kB)
Free physical memory: 459MB (470820kB)
Memory in use : 52
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

4.10.2007
ISO compilation
10:26:53 PM #1 Text 0 File Isodoc.cpp, Line 6314
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

10:26:53 PM #2 Text 0 File Reader.cpp, Line 127
Reader running

10:26:53 PM #3 Text 0 File Writer.cpp, Line 122
Writer Slimtype DVDRW SOSW-852S running

10:26:53 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)

10:26:53 PM #5 Text 0 File Burncd.cpp, Line 3231
Turn on Disc-At-Once, using DVD media

10:27:23 PM #6 Text 0 File DlgWaitCD.cpp, Line 267
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 103039 ( 22:53.64, 201MB)

10:27:23 PM #7 Text 0 File DlgWaitCD.cpp, Line 279
Write in overburning mode: NO (enabled: CD)

10:27:23 PM #8 Text 0 File DlgWaitCD.cpp, Line 2457
Recorder: Slimtype DVDRW SOSW-852S, Media type: DVD-R
Disc Manufacturer: CMC MA - G. AM3
Disc Application Code: 64, Disc Physical Code: 193

10:27:23 PM #9 Text 0 File DlgWaitCD.cpp, Line 445
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: Unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD+R DL.)

10:27:23 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 103040 (103040) = #103040/22:53.65
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 103040 blocks [Slimtype DVDRW SOSW-852S]
--------------------------------------------------------------

10:27:23 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [Slimtype DVDRW SOSW-852S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 211025920, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
103040 | lead-out | 1 | 0x41 | 0x00

10:27:24 PM #12 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

10:27:24 PM #13 Text 0 File Burncd.cpp, Line 4116
Cache writing successful.

10:27:24 PM #14 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

10:27:24 PM #15 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 2x (2,770 KB/s)

10:27:24 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2643
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

10:27:24 PM #17 Text 0 File DVDR.cpp, Line 2340
Recording mode: Sequential Recording Mode

10:27:24 PM #18 Text 0 File Mmc.cpp, Line 21627
Set BUFE: SMART-BURN -> ON , Adapt writespeed to disc : ON

10:27:24 PM #19 Text 0 File DVDR.cpp, Line 2494
Start write address at LBA 0
DVD high compatibility mode: Yes

10:27:24 PM #20 Text 0 File Cdrdrv.cpp, Line 8821
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

10:27:32 PM #21 SCSI -400 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x0BBD0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x27
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x27 0x00

10:27:32 PM #22 CDR -400 File Writer.cpp, Line 311
Unspecified target error

10:27:32 PM #23 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

10:27:33 PM #24 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

10:27:33 PM #25 Text 0 File DVDR.cpp, Line 2732
EndDAO: Last written address was -1

10:27:33 PM #26 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 2x (2,770 KB/s)

Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/18/2001 1:07:32 PM
File 'Drivers\CDRALW2K.SYS': Ver=7.1.0.188 , size=24832 bytes, created 11/11/2004 9:30:18 AM
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 11/21/2005 1:48:21 PM
File 'Drivers\PXHELP20.SYS': Ver=2.03.26a, size=20576 bytes, created 5/13/2005 5:54:10 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 9:59:44 PM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero-Burning Rom, History File *** ======
Owner

1A20-0316-0010-2522-5586-6029

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 11/21/2005 1:48:21 PM
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 9/29/2007 12:45:46 PM
Nero Version: 6.6.0.15
Internal Version: 6, 6, 0, 15e
(Nero Express)
Recorder: <Slimtype DVDRW SOSW-852S>Version: PRS9 - HA 1 TA 0 - 6.6.0.15
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <Slimtype DVDRW SOSW-852S >Version: PRS9 - HA 1 TA 0 - 6.6.0.15
Adapter driver: <atapi> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : HTS421280H9AT00 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : Slimtype DVDRW SOSW-852S atapi Port 1 ID 0 DMA: On

=== CDRom-Device-Map ===
Slimtype DVDRW SOSW-852S E: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 958MB (981232kB)
Free physical memory: 461MB (472536kB)
Memory in use : 51
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

4.10.2007
ISO compilation
10:28:04 PM #1 Text 0 File Isodoc.cpp, Line 6314
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

10:28:04 PM #2 Text 0 File Reader.cpp, Line 127
Reader running

10:28:04 PM #3 Text 0 File Writer.cpp, Line 122
Writer Slimtype DVDRW SOSW-852S running

10:28:04 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)

10:28:04 PM #5 Text 0 File Burncd.cpp, Line 3231
Turn on Disc-At-Once, using DVD media

10:28:27 PM #6 Text 0 File DlgWaitCD.cpp, Line 267
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 103039 ( 22:53.64, 201MB)

10:28:27 PM #7 Text 0 File DlgWaitCD.cpp, Line 279
Write in overburning mode: NO (enabled: CD)

10:28:27 PM #8 Text 0 File DlgWaitCD.cpp, Line 2457
Recorder: Slimtype DVDRW SOSW-852S, Media type: DVD-R
Disc Manufacturer: CMC MA - G. AM3
Disc Application Code: 64, Disc Physical Code: 193

10:28:27 PM #9 Text 0 File DlgWaitCD.cpp, Line 445
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: Unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD+R DL.)

10:28:27 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 103040 (103040) = #103040/22:53.65
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 103040 blocks [Slimtype DVDRW SOSW-852S]
--------------------------------------------------------------

10:28:27 PM #11 Text 0 File Burncd.cpp, Line 3825
Can only write at 2x (2,770 KB/s) instead of 3x (4,155 KB/s) to current disc.

10:28:27 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [Slimtype DVDRW SOSW-852S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 211025920, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
103040 | lead-out | 1 | 0x41 | 0x00

10:28:27 PM #13 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

10:28:27 PM #14 Text 0 File Burncd.cpp, Line 4116
Cache writing successful.

10:28:27 PM #15 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

10:28:27 PM #16 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 2x (2,770 KB/s)

10:28:27 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2643
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

10:28:28 PM #18 Text 0 File DVDR.cpp, Line 2340
Recording mode: Sequential Recording Mode

10:28:28 PM #19 Text 0 File Mmc.cpp, Line 21627
Set BUFE: SMART-BURN -> ON , Adapt writespeed to disc : ON

10:28:28 PM #20 Text 0 File DVDR.cpp, Line 2494
Start write address at LBA 0
DVD high compatibility mode: Yes

10:28:28 PM #21 Text 0 File Cdrdrv.cpp, Line 8821
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

10:28:28 PM #22 SCSI -400 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x0BBE0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x27
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x27 0x00

10:28:28 PM #23 CDR -400 File Writer.cpp, Line 311
Unspecified target error

10:28:28 PM #24 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

10:28:28 PM #25 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

10:28:29 PM #26 Text 0 File DVDR.cpp, Line 2732
EndDAO: Last written address was -1

10:28:29 PM #27 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 2x (2,770 KB/s)

Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/18/2001 1:07:32 PM
File 'Drivers\CDRALW2K.SYS': Ver=7.1.0.188 , size=24832 bytes, created 11/11/2004 9:30:18 AM
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 11/21/2005 1:48:21 PM
File 'Drivers\PXHELP20.SYS': Ver=2.03.26a, size=20576 bytes, created 5/13/2005 5:54:10 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 9:59:44 PM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero-Burning Rom, History File *** ======
Owner

1A20-0316-0010-2522-5586-6029

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 11/21/2005 1:48:21 PM
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 9/29/2007 12:45:46 PM
Nero Version: 6.6.0.15
Internal Version: 6, 6, 0, 15e
(Nero Express)
Recorder: < Image Recorder> Version: Not available - HA -1 TA 0 - 6.6.0.15
Adapter driver: <Virtual Device> HA -1
Drive buffer :
CD-ROM: <Slimtype DVDRW SOSW-852S >Version: PRS9 - HA 1 TA 0 - 6.6.0.15
Adapter driver: <atapi> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : HTS421280H9AT00 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : Slimtype DVDRW SOSW-852S atapi Port 1 ID 0 DMA: On

=== CDRom-Device-Map ===
Slimtype DVDRW SOSW-852S E: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 958MB (981232kB)
Free physical memory: 545MB (558828kB)
Memory in use : 43
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

4.10.2007
ISO compilation
10:28:53 PM #1 Text 0 File Isodoc.cpp, Line 6314
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

10:28:53 PM #2 Text 0 File Reader.cpp, Line 127
Reader running

10:28:53 PM #3 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)

10:28:53 PM #4 Text 0 File Writer.cpp, Line 122
Writer Image Recorder running

10:28:53 PM #5 Text 0 File Burncd.cpp, Line 3231
Turn on Disc-At-Once, using DVD media

10:28:53 PM #6 Text 0 File DlgWaitCD.cpp, Line 267
Last possible write address on media: 4718591 (1048:34.41, 9215MB)
Last address to be written: 103039 ( 22:53.64, 201MB)

10:28:53 PM #7 Text 0 File DlgWaitCD.cpp, Line 279
Write in overburning mode: NO (enabled: CD)

10:28:53 PM #8 Text 0 File DlgWaitCD.cpp, Line 2457
Recorder: Image Recorder;
CD type reading failed
ATIP Data: ?

10:28:53 PM #9 Text 0 File DlgWaitCD.cpp, Line 445
>>> Protocol of DlgWaitCD activities: <<<
=========================================

10:28:53 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 103040 (103040) = #103040/22:53.65
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 103040 blocks [Image Recorder]
--------------------------------------------------------------

10:29:14 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [Image Recorder] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 211025920, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
103040 | lead-out | 1 | 0x41 | 0x00

10:29:14 PM #12 Phase 65 File dlgbrnst.cpp, Line 1832
Burn process started

10:29:14 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 2643
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

10:29:55 PM #14 Text 0 File WriterStatus.cpp, Line 116
< Image Recorder > start writing Lead-Out at LBA 103040 (19280h), lenght 0 blocks

10:29:55 PM #15 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

10:29:55 PM #16 Phase 66 File dlgbrnst.cpp, Line 1832
Burn process completed successfully

Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/18/2001 1:07:32 PM
File 'Drivers\CDRALW2K.SYS': Ver=7.1.0.188 , size=24832 bytes, created 11/11/2004 9:30:18 AM
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 11/21/2005 1:48:21 PM
File 'Drivers\PXHELP20.SYS': Ver=2.03.26a, size=20576 bytes, created 5/13/2005 5:54:10 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 9:59:44 PM (Adapter driver for src)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero-Burning Rom, History File *** ======
Owner

1A20-0316-0010-2522-5586-6029

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 11/21/2005 1:48:21 PM
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 9/29/2007 12:45:46 PM
Nero Version: 6.6.0.15
Internal Version: 6, 6, 0, 15e
(Nero Express)
Recorder: <Slimtype DVDRW SOSW-852S>Version: PRS9 - HA 1 TA 0 - 6.6.0.15
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <Slimtype DVDRW SOSW-852S >Version: PRS9 - HA 1 TA 0 - 6.6.0.15
Adapter driver: <atapi> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : HTS421280H9AT00 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : Slimtype DVDRW SOSW-852S atapi Port 1 ID 0 DMA: On

=== CDRom-Device-Map ===
Slimtype DVDRW SOSW-852S E: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 958MB (981232kB)
Free physical memory: 600MB (615080kB)
Memory in use : 37
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

8.10.2007
===== Disc-Copy over image - 1st step : Copy to image ...

10:09:24 PM #1 Text 0 File Reader.cpp, Line 127
Reader running

10:09:24 PM #2 Text 0 File Writer.cpp, Line 122
Writer Image Recorder running

10:09:24 PM #3 Text 0 File DVDCopy.cpp, Line 279
DVD Track-Information from source disc
S01 T01 Con 0x14 Start 0 Len 1582208 (gap 0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0)

10:09:24 PM #4 Text 0 File DVDCopy.cpp, Line 382
Max -1 tracks of 1 allowed to copy
1: 0 - 1582208 = 1582208, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)

10:09:24 PM #5 Text 0 File Burncd.cpp, Line 3231
Turn on Disc-At-Once, using DVD media

10:09:25 PM #6 Text 0 File DlgWaitCD.cpp, Line 267
Last possible write address on media: 4718591 (1048:34.41, 9215MB)
Last address to be written: 1582207 (351:36.07, 3090MB)

10:09:25 PM #7 Text 0 File DlgWaitCD.cpp, Line 279
Write in overburning mode: NO (enabled: CD)

10:09:25 PM #8 Text 0 File DlgWaitCD.cpp, Line 2457
Recorder: Image Recorder;
CD type reading failed
ATIP Data: ?

10:09:25 PM #9 Text 0 File DlgWaitCD.cpp, Line 445
>>> Protocol of DlgWaitCD activities: <<<
=========================================

10:09:25 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - Data (mode 1))
2 indices, index0 (150) not provided
original disc pos #0 + 1582208 (1582208) = #1582208/351:36.8
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1582208 blocks [Image Recorder]
--------------------------------------------------------------

10:09:25 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [Image Recorder] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3240361984, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1582208 | lead-out | 1 | 0x41 | 0x00

10:09:25 PM #12 Phase 120 File dlgbrnst.cpp, Line 1832
Creating the image for burning

10:09:25 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 2643
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

10:17:16 PM #14 Text 0 File WriterStatus.cpp, Line 116
< Image Recorder > start writing Lead-Out at LBA 1582208 (182480h), lenght 0 blocks

10:17:16 PM #15 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

10:17:17 PM #16 Phase 121 File dlgbrnst.cpp, Line 1832
Creating Image completed successfully

===== Disc-Copy over image - 2nd step : Burn the image ...

10:17:21 PM #1 Text 0 File Reader.cpp, Line 127
Reader running

10:17:21 PM #2 Text 0 File Writer.cpp, Line 122
Writer Slimtype DVDRW SOSW-852S running

10:17:21 PM #3 IMAGEGEN -10 File ImageGen.cpp, Line 366
Image was written as DAO.
DAOI:
MediaCatalogNumber = ''
TocType = 0x40
Finalized = 1
First/Last Track = 1 / 1
1: ISRC = ''
Blocksize = 2048
TrackMode = 'TRM_DATA_MODE1'
TrackConfig = 0x00
First/Last Index = 0 / 1
Index0FilePos = 0, Index1FilePos = 0, NextTrackFilePos = 3240361984
CUES:
0: Ctrl=0x41 Trk= 0 (0x00) Index=00 Start=00:00.00 ( 0) RecDep=0x00
1: Ctrl=0x41 Trk= 1 (0x01) Index=00 Start=00:00.00 ( 0) RecDep=0x00
2: Ctrl=0x41 Trk= 1 (0x01) Index=01 Start=00:00.00 ( 0) RecDep=0x00
3: Ctrl=0x41 Trk=110 (0xAA) Index=01 Start=351:36.08 ( 1582208) RecDep=0x00
MTYP: Mediumtype = DVD (old format) (0x1C)
Image file name: <C:\Documents and Settings\Owner\My Documents\My Videos\TempImage.nrg>

10:17:21 PM #4 Text 0 File Burncd.cpp, Line 3231
Turn on Disc-At-Once, using DVD media

10:18:22 PM #5 Text 0 File DlgWaitCD.cpp, Line 267
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1582207 (351:36.07, 3090MB)

10:18:22 PM #6 Text 0 File DlgWaitCD.cpp, Line 279
Write in overburning mode: NO (enabled: CD)

10:18:22 PM #7 Text 0 File DlgWaitCD.cpp, Line 2457
Recorder: Slimtype DVDRW SOSW-852S, Media type: DVD-R
Disc Manufacturer: CMC MA - G. AM3
Disc Application Code: 64, Disc Physical Code: 193

10:18:22 PM #8 Text 0 File DlgWaitCD.cpp, Line 445
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc for simulation.
(Medium in drive: Unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD+R DL.)

10:18:22 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - DVD-ROM)
2 indices, index0 (150) not provided
original disc pos #0 + 1582208 (1582208) = #1582208/351:36.8
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1582208 blocks [Slimtype DVDRW SOSW-852S]
--------------------------------------------------------------

10:18:22 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [Slimtype DVDRW SOSW-852S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3240361984, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1582208 | lead-out | 1 | 0x41 | 0x00

10:18:22 PM #11 Phase 32 File dlgbrnst.cpp, Line 1832
Simulation started at 2x (2,770 KB/s)

10:18:22 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 2643
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

10:18:22 PM #13 Text 0 File DVDR.cpp, Line 2340
Recording mode: Sequential Recording Mode

10:18:22 PM #14 Text 0 File Mmc.cpp, Line 21627
Set BUFE: SMART-BURN -> ON , Adapt writespeed to disc : ON

10:18:22 PM #15 Text 0 File DVDR.cpp, Line 2494
Start write address at LBA 0
DVD high compatibility mode: Yes

10:18:22 PM #16 Text 0 File Cdrdrv.cpp, Line 8821
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

10:18:27 PM #17 Text 0 File Cdrdrv.cpp, Line 1288
22:18:27.468 - Slimtype DVDRW SOSW-852S\H1 T0 : Queue again later

10:37:56 PM #18 Text 0 File WriterStatus.cpp, Line 116
<Slimtype DVDRW SOSW-852S > start writing Lead-Out at LBA 1582208 (182480h), lenght 0 blocks

10:37:56 PM #19 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

10:37:56 PM #20 Text 0 File DVDR.cpp, Line 2732
EndDAO: Last written address was 1582207

10:38:39 PM #21 Phase 33 File dlgbrnst.cpp, Line 1832
Simulation completed successfully at 2x (2,770 KB/s)

Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/18/2001 1:07:32 PM
File 'Drivers\CDRALW2K.SYS': Ver=7.1.0.188 , size=24832 bytes, created 11/11/2004 9:30:18 AM
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 11/21/2005 1:48:21 PM
File 'Drivers\PXHELP20.SYS': Ver=2.03.26a, size=20576 bytes, created 5/13/2005 5:54:10 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 9:59:44 PM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero-Burning Rom, History File *** ======
Owner

1A20-0316-0010-2522-5586-6029

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 11/21/2005 1:48:21 PM
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 9/29/2007 12:45:46 PM
Nero Version: 6.6.0.15
Internal Version: 6, 6, 0, 15e
(Nero Express)
Recorder: <Slimtype DVDRW SOSW-852S>Version: PRS9 - HA 1 TA 0 - 6.6.0.15
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <Slimtype DVDRW SOSW-852S >Version: PRS9 - HA 1 TA 0 - 6.6.0.15
Adapter driver: <atapi> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : HTS421280H9AT00 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : Slimtype DVDRW SOSW-852S atapi Port 1 ID 0 DMA: On

=== CDRom-Device-Map ===
Slimtype DVDRW SOSW-852S E: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 958MB (981232kB)
Free physical memory: 141MB (145052kB)
Memory in use : 85
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

8.10.2007
===== Disc-Copy over image - 1st step : Copy to image ...

10:40:25 PM #1 Text 0 File Reader.cpp, Line 127
Reader running

10:40:25 PM #2 Text 0 File Writer.cpp, Line 122
Writer Image Recorder running

10:40:25 PM #3 Text 0 File DVDCopy.cpp, Line 279
DVD Track-Information from source disc
S01 T01 Con 0x14 Start 0 Len 1582208 (gap 0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0)

10:40:25 PM #4 Text 0 File DVDCopy.cpp, Line 382
Max -1 tracks of 1 allowed to copy
1: 0 - 1582208 = 1582208, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)

10:40:25 PM #5 Text 0 File Burncd.cpp, Line 3231
Turn on Disc-At-Once, using DVD media

10:40:25 PM #6 Text 0 File DlgWaitCD.cpp, Line 267
Last possible write address on media: 4718591 (1048:34.41, 9215MB)
Last address to be written: 1582207 (351:36.07, 3090MB)

10:40:25 PM #7 Text 0 File DlgWaitCD.cpp, Line 279
Write in overburning mode: NO (enabled: CD)

10:40:25 PM #8 Text 0 File DlgWaitCD.cpp, Line 2457
Recorder: Image Recorder;
CD type reading failed
ATIP Data: ?

10:40:25 PM #9 Text 0 File DlgWaitCD.cpp, Line 445
>>> Protocol of DlgWaitCD activities: <<<
=========================================

10:40:25 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - Data (mode 1))
2 indices, index0 (150) not provided
original disc pos #0 + 1582208 (1582208) = #1582208/351:36.8
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1582208 blocks [Image Recorder]
--------------------------------------------------------------

10:40:25 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [Image Recorder] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3240361984, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1582208 | lead-out | 1 | 0x41 | 0x00

10:40:25 PM #12 Phase 120 File dlgbrnst.cpp, Line 1832
Creating the image for burning

10:40:25 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 2643
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

10:48:20 PM #14 Text 0 File WriterStatus.cpp, Line 116
< Image Recorder > start writing Lead-Out at LBA 1582208 (182480h), lenght 0 blocks

10:48:20 PM #15 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

10:48:20 PM #16 Phase 121 File dlgbrnst.cpp, Line 1832
Creating Image completed successfully

===== Disc-Copy over image - 2nd step : Burn the image ...

10:48:24 PM #1 Text 0 File Reader.cpp, Line 127
Reader running

10:48:24 PM #2 Text 0 File Writer.cpp, Line 122
Writer Slimtype DVDRW SOSW-852S running

10:48:25 PM #3 IMAGEGEN -10 File ImageGen.cpp, Line 366
Image was written as DAO.
DAOI:
MediaCatalogNumber = ''
TocType = 0x40
Finalized = 1
First/Last Track = 1 / 1
1: ISRC = ''
Blocksize = 2048
TrackMode = 'TRM_DATA_MODE1'
TrackConfig = 0x00
First/Last Index = 0 / 1
Index0FilePos = 0, Index1FilePos = 0, NextTrackFilePos = 3240361984
CUES:
0: Ctrl=0x41 Trk= 0 (0x00) Index=00 Start=00:00.00 ( 0) RecDep=0x00
1: Ctrl=0x41 Trk= 1 (0x01) Index=00 Start=00:00.00 ( 0) RecDep=0x00
2: Ctrl=0x41 Trk= 1 (0x01) Index=01 Start=00:00.00 ( 0) RecDep=0x00
3: Ctrl=0x41 Trk=110 (0xAA) Index=01 Start=351:36.08 ( 1582208) RecDep=0x00
MTYP: Mediumtype = DVD (old format) (0x1C)
Image file name: <C:\Documents and Settings\Owner\My Documents\My Videos\TempImage.nrg>

10:48:25 PM #4 Text 0 File Burncd.cpp, Line 3231
Turn on Disc-At-Once, using DVD media

10:48:59 PM #5 Text 0 File DlgWaitCD.cpp, Line 267
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1582207 (351:36.07, 3090MB)

10:48:59 PM #6 Text 0 File DlgWaitCD.cpp, Line 279
Write in overburning mode: NO (enabled: CD)

10:48:59 PM #7 Text 0 File DlgWaitCD.cpp, Line 2457
Recorder: Slimtype DVDRW SOSW-852S, Media type: DVD-R
Disc Manufacturer: CMC MA - G. AM3
Disc Application Code: 64, Disc Physical Code: 193

10:48:59 PM #8 Text 0 File DlgWaitCD.cpp, Line 445
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: Unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD+R DL.)

10:48:59 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - DVD-ROM)
2 indices, index0 (150) not provided
original disc pos #0 + 1582208 (1582208) = #1582208/351:36.8
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1582208 blocks [Slimtype DVDRW SOSW-852S]
--------------------------------------------------------------

10:48:59 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [Slimtype DVDRW SOSW-852S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3240361984, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1582208 | lead-out | 1 | 0x41 | 0x00

10:49:00 PM #11 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 2x (2,770 KB/s)

10:49:00 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 2643
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

10:49:00 PM #13 Text 0 File DVDR.cpp, Line 2340
Recording mode: Sequential Recording Mode

10:49:00 PM #14 Text 0 File Mmc.cpp, Line 21627
Set BUFE: SMART-BURN -> ON , Adapt writespeed to disc : ON

10:49:00 PM #15 Text 0 File DVDR.cpp, Line 2494
Start write address at LBA 0
DVD high compatibility mode: Yes

10:49:00 PM #16 Text 0 File Cdrdrv.cpp, Line 8821
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

10:49:04 PM #17 SCSI -400 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x066A0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x27
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x27 0x00

10:49:04 PM #18 CDR -400 File Writer.cpp, Line 311
Unspecified target error

10:49:04 PM #19 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

10:49:05 PM #20 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

10:49:05 PM #21 Text 0 File DVDR.cpp, Line 2732
EndDAO: Last written address was -1

10:49:05 PM #22 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 2x (2,770 KB/s)

Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/18/2001 1:07:32 PM
File 'Drivers\CDRALW2K.SYS': Ver=7.1.0.188 , size=24832 bytes, created 11/11/2004 9:30:18 AM
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 11/21/2005 1:48:21 PM
File 'Drivers\PXHELP20.SYS': Ver=2.03.26a, size=20576 bytes, created 5/13/2005 5:54:10 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 9:59:44 PM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero-Burning Rom, History File *** ======

[ + quote]

Garphius

56delray

Senior Member

9. October 2007 @ 14:24

Link to this message

Originally posted by garphius:
I replaced it with a Slimtype DVDRW SOSW-852s.
....
DVD's are TDK DVD-R.
....
Disc Manufacturer: CMC MA - G. AM3
....
Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=7.1.0.188 , size=24832 bytes, created 11/11/2004 9:30:18 AM

====== *** Nero-Burning Rom, History File *** ======
Owner

1A20-****-****-****-****-****
.....
Nero Version: 6.6.0.15

Is the SOSW-852s a OEM model?

The TDK are CMC crap. See link
You need better blanks like Brand Ritek, Verbatims.
http://www.videohelp.com/dvdmedia?dvdmed...20MAG.%20AM3%20

[ + quote]

garphius

Newbie

10. October 2007 @ 06:29

Link to this message

Can't believe it, I've struggled with with this problem for two weeks. Took your suggestion and tried another brand of disc (Quentin, just happen to have one laying around) and the burn was successful.

In the past, I burned hundreds TDK DVDs with my old Philips DVDRW. Never would have thought that they wouldn't work with the new SOSW-852s burner.

Thanks so much for the suggestion 56delray

[ + quote]

56delray

Senior Member

10. October 2007 @ 15:51

Link to this message

Sorry I had to bug out and I did not finish the post.

TDK's can be good or bad it is the media code that tell the story.
That is why it is recomended to buy only branded media (aka. the name on the box is the same as the maker).

Here is a list of 16x TDK's. Some are great and some are crap!
http://www.videohelp.com/dvdmedia?dvdmed...h+or+List+Media

To finish the last post.

Quote:
Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=7.1.0.188 , size=24832 bytes, created 11/11/2004 9:30:18 AM

====== *** Nero-Burning Rom, History File *** ======
Owner

1A20-****-****-****-****-****
.....
Nero Version: 6.6.0.15

CDRALW2K is the Roxio software driver.
It may cause trouble with Nero InCD.
Run this zapper to get rid of it.
http://www.softpedia.com/get/Tweak/Uninstallers/Roxio-Zap.shtml

You should edit your serial number from Nero logs (ex 1A20-****-****-****-****-****).

You should update to the stable version of Nero 6.
Nero 6.6.0.18
http://www.filehippo.com/download_nero_burning_rom/tech/?539

[ + quote]

Start a new thread

afterdawn.com > forums > pc hardware > dvd / blu-ray drives > slimtype dvdrw sosw-852s - will not burn dvd's - unspecified target error


		User name	Password

		Not registered yet? Register here. Lost your password? Click here.