|
|
|
2 different DVDs Nero gives 2 Different Errors
|
|
|
Idioteck
Newbie
|
19. November 2007 @ 07:51 |
Link to this message
|
So basically i can read/write/rip all CDs read/rip DVDs but its impossible to write to any DVD (-r/+r)
Memorex DVD-R
Quote:
Windows XP 5.1
IA32
WinAspi: -
NT-SPTI used
Nero Version: 8.0.3.0
Internal Version: 8, 0, 3, 0
Recorder: <SONY DVD RW DW-U12A> Version: 2.0e - HA 1 TA 0 - 8.0.3.0
Adapter driver: <IDE> HA 1
Drive buffer : 8192kB
Bus Type : default
CD-ROM: <SONY DVD RW DW-U12A >Version: 2.0e - HA 1 TA 0 - 8.0.3.0
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1200BB-98DWA0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : ST3400632A atapi Port 0 ID 1 DMA: On
CdRomPeripheral : SONY DVD RW DW-U12A atapi Port 1 ID 0 DMA: On
CdRomPeripheral : ASUS CD-S400/A atapi Port 1 ID 1 DMA: Off
=== CDRom-Device-Map ===
SONY DVD RW DW-U12A F: CdRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
BUFE : 0
Physical memory : 511MB (523628kB)
Free physical memory: 220MB (225516kB)
Memory in use : 56 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
19.11.2007
UDF compilation
00:15:19 #1 Text 0 File SCSIPTICommands.cpp, Line 424
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
00:15:20 #2 Text 0 File Isodoc.cpp, Line 6668
UDF document burn settings
------------------------------------------
Determine maximum speed : TRUE
Simulate : TRUE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : pure
UDF Options : automatic
UDF Revision : 1.02
UDF Partition Type : physical
00:15:20 #3 Text 0 File Burncd.cpp, Line 3520
Turn on Disc-At-Once, using DVD media
00:15:20 #4 Text 0 File DlgWaitCD.cpp, Line 307
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2239375 (497:38.25, 4373MB)
00:15:20 #5 Text 0 File DlgWaitCD.cpp, Line 319
Write in overburning mode: NO (enabled: CD)
00:15:20 #6 Text 0 File DlgWaitCD.cpp, Line 2972
Recorder: SONY DVD RW DW-U12A, Media type: DVD-R
Disc Manufacturer: RITEKF - 1
Disc Application Code: 64, Disc Physical Code: 193
00:15:20 #7 Text 0 File DlgWaitCD.cpp, Line 493
>>> Protocol of DlgWaitCD activities: <<<
=========================================
00:15:20 #8 Text 0 File ThreadedTransferInterface.cpp, Line 795
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2239376 (2239376) = #2239376/497:38.26
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2239376 blocks [F: SONY DVD RW DW-U12A]
--------------------------------------------------------------
00:15:20 #9 Text 0 File ThreadedTransferInterface.cpp, Line 997
Prepare [F: SONY DVD RW DW-U12A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4586242048, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 2239376 | 0 | 0x00
2239376 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
00:15:20 #10 Text 0 File SCSIPTICommands.cpp, Line 215
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME
00:15:20 #11 Text 0 File Burncd.cpp, Line 4306
Caching options: cache CDRom or Network-Yes, small files-No (<64KB)
00:15:20 #12 Phase 24 File dlgbrnst.cpp, Line 1762
Caching of files started
00:15:20 #13 Text 0 File Burncd.cpp, Line 4425
Cache writing successful.
00:15:20 #14 Phase 25 File dlgbrnst.cpp, Line 1762
Caching of files completed
00:15:20 #15 Phase 28 File dlgbrnst.cpp, Line 1762
Speed measurement started
00:15:21 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2723
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
00:15:21 #17 Text 0 File ThreadedTransfer.cpp, Line 269
Pipe memory size 590400
00:17:40 #18 Text 0 File WriterStatus.cpp, Line 113
<F: SONY DVD RW DW-U12A> start writing Lead-Out at LBA 2239376 (222B90h), length 0 blocks
00:17:40 #19 Phase 29 File dlgbrnst.cpp, Line 1711
Speed measurement completed: 23.2x (32,040 KB/s)
00:17:40 #20 Phase 32 File dlgbrnst.cpp, Line 1762
Simulation started at 2x (2,770 KB/s)
00:17:41 #21 Text 0 File ThreadedTransferInterface.cpp, Line 2723
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
00:17:41 #22 Text 0 File DVDR.cpp, Line 3227
Recording mode: Sequential Recording Mode
00:17:41 #23 Text 0 File DVDR.cpp, Line 3383
Start write address at LBA 0
DVD high compatibility mode: Yes
00:17:41 #24 SPTI -1066 File SCSIPassThrough.cpp, Line 181
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAC 00 00 00 00 00 00 00 00 64 00 00
Sense Area: 0x70 00 05 00 00 00 00 12 00 00 00 00 24 00 00 CC 00 01
Buffer x08340040: Len x648
00:17:41 #25 Text 0 File Cdrdrv.cpp, Line 9918
---- Disc Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Revision number of maximum recording speed: -
Revision number of minimum recording speed: -
Revision number table of recording speed: - - - - - - -
Class: 0
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00:17:41 #26 Text 0 File ThreadedTransfer.cpp, Line 269
Pipe memory size 74390400
00:17:43 #27 Text 0 File Cdrdrv.cpp, Line 1342
00:17:43.156 - 㩆匠乏⁙噄⁄坒䐠ⵗㅕ䄲 : Queue again later
00:18:23 #28 Text 0 File Cdrdrv.cpp, Line 1342
00:18:23.328 - 㩆匠乏⁙噄⁄坒䐠ⵗㅕ䄲 : Queue again later
00:18:23 #29 Text 0 File Cdrdrv.cpp, Line 1342
00:18:23.937 - 㩆匠乏⁙噄⁄坒䐠ⵗㅕ䄲 : Queue again later
00:18:23 #30 Text 0 File Cdrdrv.cpp, Line 1342
00:18:23.953 - 㩆匠乏⁙噄⁄坒䐠ⵗㅕ䄲 : Queue again later
00:19:38 #31 Text 0 File Cdrdrv.cpp, Line 1342
00:19:38.156 - 㩆匠乏⁙噄⁄坒䐠ⵗㅕ䄲 : Queue again later
00:20:52 #32 Text 0 File Cdrdrv.cpp, Line 1342
00:20:52.968 - 㩆匠乏⁙噄⁄坒䐠ⵗㅕ䄲 : Queue again later
00:22:07 #33 Text 0 File Cdrdrv.cpp, Line 1342
00:22:07.796 - 㩆匠乏⁙噄⁄坒䐠ⵗㅕ䄲 : Queue again later
00:23:22 #34 Text 0 File Cdrdrv.cpp, Line 1342
00:23:22.640 - 㩆匠乏⁙噄⁄坒䐠ⵗㅕ䄲 : Queue again later
00:24:37 #35 Text 0 File Cdrdrv.cpp, Line 1342
00:24:37.453 - 㩆匠乏⁙噄⁄坒䐠ⵗㅕ䄲 : Queue again later
00:25:52 #36 Text 0 File Cdrdrv.cpp, Line 1342
00:25:52.296 - 㩆匠乏⁙噄⁄坒䐠ⵗㅕ䄲 : Queue again later
00:27:07 #37 Text 0 File Cdrdrv.cpp, Line 1342
00:27:07.140 - 㩆匠乏⁙噄⁄坒䐠ⵗㅕ䄲 : Queue again later
00:28:21 #38 Text 0 File Cdrdrv.cpp, Line 1342
00:28:21.968 - 㩆匠乏⁙噄⁄坒䐠ⵗㅕ䄲 : Queue again later
00:29:36 #39 Text 0 File Cdrdrv.cpp, Line 1342
00:29:36.843 - 㩆匠乏⁙噄⁄坒䐠ⵗㅕ䄲 : Queue again later
00:30:51 #40 Text 0 File Cdrdrv.cpp, Line 1342
00:30:51.687 - 㩆匠乏⁙噄⁄坒䐠ⵗㅕ䄲 : Queue again later
00:32:06 #41 Text 0 File Cdrdrv.cpp, Line 1342
00:32:06.515 - 㩆匠乏⁙噄⁄坒䐠ⵗㅕ䄲 : Queue again later
00:33:21 #42 Text 0 File Cdrdrv.cpp, Line 1342
00:33:21.328 - 㩆匠乏⁙噄⁄坒䐠ⵗㅕ䄲 : Queue again later
00:34:36 #43 Text 0 File Cdrdrv.cpp, Line 1342
00:34:36.156 - 㩆匠乏⁙噄⁄坒䐠ⵗㅕ䄲 : Queue again later
00:35:51 #44 Text 0 File Cdrdrv.cpp, Line 1342
00:35:51.078 - 㩆匠乏⁙噄⁄坒䐠ⵗㅕ䄲 : Queue again later
00:37:05 #45 Text 0 File Cdrdrv.cpp, Line 1342
00:37:05.859 - 㩆匠乏⁙噄⁄坒䐠ⵗㅕ䄲 : Queue again later
00:38:20 #46 Text 0 File Cdrdrv.cpp, Line 1342
00:38:20.796 - 㩆匠乏⁙噄⁄坒䐠ⵗㅕ䄲 : Queue again later
00:39:35 #47 Text 0 File Cdrdrv.cpp, Line 1342
00:39:35.656 - 㩆匠乏⁙噄⁄坒䐠ⵗㅕ䄲 : Queue again later
00:40:50 #48 Text 0 File Cdrdrv.cpp, Line 1342
00:40:50.484 - 㩆匠乏⁙噄⁄坒䐠ⵗㅕ䄲 : Queue again later
00:42:05 #49 Text 0 File Cdrdrv.cpp, Line 1342
00:42:05.281 - 㩆匠乏⁙噄⁄坒䐠ⵗㅕ䄲 : Queue again later
00:46:15 #50 Text 0 File WriterStatus.cpp, Line 113
<F: SONY DVD RW DW-U12A> start writing Lead-Out at LBA 2239376 (222B90h), length 0 blocks
00:47:38 #51 Text 0 File DVDR.cpp, Line 3785
EndDAO: Last written address was 2239375 (222B8Fh)
00:47:38 #52 Phase 33 File dlgbrnst.cpp, Line 1762
Simulation completed successfully at 2x (2,770 KB/s)
00:47:39 #53 Phase 36 File dlgbrnst.cpp, Line 1762
Burn process started at 2x (2,770 KB/s)
00:47:40 #54 Text 0 File ThreadedTransferInterface.cpp, Line 2723
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
00:47:40 #55 Text 0 File DVDR.cpp, Line 3227
Recording mode: Sequential Recording Mode
00:47:40 #56 Text 0 File DVDR.cpp, Line 3383
Start write address at LBA 0
DVD high compatibility mode: Yes
00:47:40 #57 SPTI -1066 File SCSIPassThrough.cpp, Line 181
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAC 00 00 00 00 00 00 00 00 64 00 00
Sense Area: 0x70 00 05 00 00 00 00 12 00 00 00 00 24 00 00 CC 00 01
Buffer x08340040: Len x648
00:47:40 #58 Text 0 File Cdrdrv.cpp, Line 9918
---- Disc Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Revision number of maximum recording speed: -
Revision number of minimum recording speed: -
Revision number table of recording speed: - - - - - - -
Class: 0
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00:47:40 #59 Text 0 File ThreadedTransfer.cpp, Line 269
Pipe memory size 74390400
00:47:41 #60 Text 0 File Cdrdrv.cpp, Line 1342
00:47:41.593 - 㩆匠乏⁙噄⁄坒䐠ⵗㅕ䄲 : Queue again later
00:48:28 #61 SPTI -1106 File SCSIPassThrough.cpp, Line 181
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1106)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
CDB Data: 0x2A 00 00 00 08 C0 00 00 20 00 00 00
Sense Area: 0xF1 00 03 FF FD 00 00 12 00 00 00 00 73 03
Buffer x095611c0: Len x10000
0x0E 3E 68 46 60 FB 33 4F 6D 84 C9 88 AC 2B A7 24
0x9B A6 55 B7 B6 58 5E 05 05 8A 70 A1 F0 32 5C 3A
0xA3 95 50 2B 5B 7C A2 6C 5F DD BA 19 C9 2C 6D FD
00:48:28 #62 CDR -1106 File Writer.cpp, Line 312
Power calibration error
F: SONY DVD RW DW-U12A
00:48:28 #63 Text 0 File DVDR.cpp, Line 3785
EndDAO: Last written address was 2239 (8BFh)
00:48:28 #64 Phase 38 File dlgbrnst.cpp, Line 1762
Burn process failed at 2x (2,770 KB/s)
00:48:28 #65 Text 0 File SCSIPTICommands.cpp, Line 261
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
00:48:32 #66 Text 0 File Cdrdrv.cpp, Line 11159
DriveLocker: UnLockVolume completed
00:48:32 #67 Text 0 File SCSIPTICommands.cpp, Line 424
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
TDK DVD+R
Everything up until here was the same...
Quote:
00:50:40 #6 Text 0 File DlgWaitCD.cpp, Line 2972
Recorder: SONY DVD RW DW-U12A, Media type: DVD+R
Disc Manufacturer ID: CMC MAG, Media Type ID: E01, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 3
00:50:40 #7 Text 0 File DlgWaitCD.cpp, Line 493
>>> Protocol of DlgWaitCD activities: <<<
=========================================
00:50:40 #8 Text 0 File ThreadedTransferInterface.cpp, Line 795
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2239376 (2239376) = #2239376/497:38.26
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2239376 blocks [F: SONY DVD RW DW-U12A]
--------------------------------------------------------------
00:50:40 #9 Text 0 File ThreadedTransferInterface.cpp, Line 997
Prepare [F: SONY DVD RW DW-U12A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4586242048, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 2239376 | 0 | 0x00
2239376 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
00:50:40 #10 Text 0 File SCSIPTICommands.cpp, Line 215
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME
00:50:40 #11 Text 0 File Burncd.cpp, Line 4306
Caching options: cache CDRom or Network-Yes, small files-No (<64KB)
00:50:40 #12 Phase 24 File dlgbrnst.cpp, Line 1762
Caching of files started
00:50:40 #13 Text 0 File Burncd.cpp, Line 4425
Cache writing successful.
00:50:40 #14 Phase 25 File dlgbrnst.cpp, Line 1762
Caching of files completed
00:50:40 #15 Phase 36 File dlgbrnst.cpp, Line 1762
Burn process started at 4x (5,540 KB/s)
00:50:41 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2723
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
00:50:42 #17 Text 0 File Cdrdrv.cpp, Line 9918
---- Disc Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 3 h
Disc Manufacturer ID: CMC.MAG.
Media type ID: E01
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 03 43 4D 43 20 4D - 41 47 00 45 30 31 00 38 ...CMC.MAG.E01.8
23 54 37 10 02 38 6A 02 - 88 67 15 15 0B 0B 08 08 #T7..8j..g......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................
00:50:42 #18 SPTI -1066 File SCSIPassThrough.cpp, Line 181
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAC 00 00 00 00 00 00 00 00 64 00 00
Sense Area: 0x70 00 05 00 00 00 00 12 00 00 00 00 24 00 00 CC 00 01
Buffer x04bcdec0: Len x648
00:50:42 #19 Text 0 File DVDPlusRW.cpp, Line 675
Start write address at LBA 0
DVD high compatibility mode: Yes
00:50:42 #20 Text 0 File ThreadedTransfer.cpp, Line 269
Pipe memory size 74390400
01:05:13 #21 Text 0 File WriterStatus.cpp, Line 113
<F: SONY DVD RW DW-U12A> start writing Lead-Out at LBA 2239376 (222B90h), length 0 blocks
01:06:10 #22 SPTI -1135 File SCSIPassThrough.cpp, Line 181
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x08
CDB Data: 0x00 00 00 00 00 00 00 00 00 00 00 00
Sense Area: 0xF1 00 03 FF FF A1 10 12 00 00 00 00 0C 08
01:06:10 #23 SPTI -1176 File SCSIPassThrough.cpp, Line 181
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1176)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x72
Sense Qual: 0x04
CDB Data: 0x5B 01 06 00 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 12 00 00 00 00 72 04 00 C9 00 02
01:06:10 #24 Text 0 File DVDPlusRW.cpp, Line 935
EndDAO: Last written address 2239376
01:06:10 #25 CDR -1135 File ThreadedTransferInterface.cpp, Line 1895
Write error
F: SONY DVD RW DW-U12A
01:06:10 #26 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1895
Could not perform end of Disc-at-once
01:06:11 #27 Phase 127 File dlgbrnst.cpp, Line 1762
Generating DVD high compatibility borders
01:12:32 #28 Text 0 File DVDPlusRW.cpp, Line 935
EndDAO: Last written address 0
01:12:32 #29 CDR -1093 File WriterStatus.cpp, Line 162
No seek complete
F: SONY DVD RW DW-U12A
01:12:32 #30 TRANSFER -24 File WriterStatus.cpp, Line 162
Could not perform end of Disc-at-once
01:12:32 #31 Phase 38 File dlgbrnst.cpp, Line 1762
Burn process failed at 4x (5,540 KB/s)
01:12:32 #32 Text 0 File SCSIPTICommands.cpp, Line 261
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
01:12:36 #33 Text 0 File Cdrdrv.cpp, Line 11159
DriveLocker: UnLockVolume completed
01:12:36 #34 Text 0 File SCSIPTICommands.cpp, Line 424
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
|
Advertisement
|
|
|
|
Moderator
1 product review
|
19. November 2007 @ 09:37 |
Link to this message
|
I hate to be the bearer of bad news, but...while the firmware for your burnere is the most recent it is still going on four years old. Old burner + new discs = burn errors. Unless you can find some older discs that have a slower rating you may need to buy a new drive. The good news is that a new drive will only set you back about $40 from Newegg or your favorite online retailer.
http://forum.rpc1.org/dl_firmware.php?download_id=1518
You are also using two of the most questionable brands of Ritek and Memorex, I would suggest Verbatim or Taiyo Yuden for my future ventures. Also there are some issues with Nero 8 for a few users, but I haven't been keeping up with the lates release. Maybe someone familiar will chime in with some input there.
|
|
Idioteck
Newbie
|
19. November 2007 @ 19:52 |
Link to this message
|
|
Obviously im no expert, but wouldnt the drive being old not matter, cause it burns at its speed. I imagine that the DVDs can handle a slower speed. I mean if that is the case (old burners cant burn new dvds even at slow speeds) that seems counter intuitive. But thanks for your input, im relieved its not the settings.
|
Moderator
1 product review
|
20. November 2007 @ 07:51 |
Link to this message
|
|
The problem is not the drive itself but rather the firmware that is lacking updates. The firmware contains information that tells the drive how to handle media. The last firmware revision for your drive was several years ago when 8X media was the norm. If there isn't a new firmware written to tell your drive how to write on your new DVD's then more than likely the burns will fail. Blank DVD's have an MID on them which the firmware reads and interprets and burns from there. You could always try to find some slower rated media and see how they work, but I doubt you will be able to use newer media.
|
|
Advertisement
|
|
|
|
Idioteck
Newbie
|
20. November 2007 @ 18:10 |
Link to this message
|
|
awesome thank you for your help
|
|
