|
|
|
DMA-driver error, CRC error - While burning
|
|
|
glazberg
Newbie
|
24. November 2007 @ 03:00 |
Link to this message
|
I've been having problems with my NEC burner. Every time I burnt a DVD it would fail, but CDs were fine. Thinking this was a hardware thing, I bought a new DVD burner. I plugged it instead of the old burner, and now it constantly fails burning CDs and DVDs.
I tried replacing the IDE connector (a different connector on the same cable) and Power cable from a different drive (DVD drive), but it didn't help either. I checked in windows to see if the DMA is on, and it is.
Oh, I should probably also mention that a friend of mine renovated my computer a month ago - replacing the mother board, CPU and adding memory. Before he did that, the burner worked fine.
What should I do?
Here is the log from Nero:
Windows XP 5.1
IA32
WinAspi: -
NT-SPTI used
Nero Version: 7.10.1.0
Internal Version: 7, 10, 1, 0
Recorder: <Optiarc DVD RW AD-7170A> Version: 1.03 - HA 1 TA 0 - 7.10.1.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <Optiarc DVD RW AD-7170A >Version: 1.03 - HA 1 TA 0 - 7.10.1.0
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD400BB-00DEA0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : Maxtor 6Y080P0 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : Optiarc DVD RW AD-7170A atapi Port 1 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVD-ROM GDR8162B atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
Optiarc DVD RW AD-7170A E: CdRom0
HL-DT-ST DVD-ROM GDR8162B F: CdRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1023MB (1048048kB)
Free physical memory: 635MB (650972kB)
Memory in use : 37 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
23.11.2007
CD-ROM (ISO)
17:48:27 #1 Text 0 File SCSIPTICommands.cpp, Line 424
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
17:48:27 #2 Text 0 File Isodoc.cpp, Line 6666
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
17:48:28 #3 Text 0 File Burncd.cpp, Line 3196
Optiarc DVD RW AD-7170A
Buffer underrun protection activated
17:48:28 #4 ISO9660GEN -11 File Geniso.cpp, Line 3343
First writeable address = 0 (0x00000000)
17:48:28 #5 Text 0 File Burncd.cpp, Line 3508
Turn on Disc-At-Once, using CD-R/RW media
17:48:28 #6 Text 0 File DlgWaitCD.cpp, Line 307
Last possible write address on media: 359848 ( 79:59.73)
Last address to be written: 358661 ( 79:44.11)
17:48:28 #7 Text 0 File DlgWaitCD.cpp, Line 319
Write in overburning mode: NO (enabled: CD)
17:48:28 #8 Text 0 File DlgWaitCD.cpp, Line 2972
Recorder: Optiarc DVD RW AD-7170A;
CDR code: 00 97 27 18; OSJ entry from: Plasmon Data systems Ltd.
ATIP Data:
Special Info [hex] 1: D0 00 A0, 2: 61 1B 12 (LI 97:27.18), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)
17:48:28 #9 Text 0 File DlgWaitCD.cpp, Line 493
>>> Protocol of DlgWaitCD activities: <<<
=========================================
17:48:28 #10 Text 0 File ThreadedTransferInterface.cpp, Line 793
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 358662 (358662) = #358662/79:42.12
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 358662 blocks [E: Optiarc DVD RW AD-7170A]
--------------------------------------------------------------
17:48:28 #11 Text 0 File ThreadedTransferInterface.cpp, Line 995
Prepare [E: Optiarc DVD RW AD-7170A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 734846976, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
-150 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
-150 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 358662 | 0 | 0x00
358662 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
17:48:28 #12 Text 0 File SCSIPTICommands.cpp, Line 215
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME
17:48:28 #13 Text 0 File Burncd.cpp, Line 4294
Caching options: cache CDRom or Network-Yes, small files-No (<64KB)
17:48:28 #14 Phase 24 File dlgbrnst.cpp, Line 1762
Caching of files started
17:48:28 #15 Text 0 File Burncd.cpp, Line 4413
Cache writing successful.
17:48:28 #16 Phase 25 File dlgbrnst.cpp, Line 1762
Caching of files completed
17:48:28 #17 Phase 36 File dlgbrnst.cpp, Line 1762
Burn process started at 32x (4,800 KB/s)
17:48:28 #18 Text 0 File ThreadedTransferInterface.cpp, Line 2721
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
17:48:28 #19 Text 0 File MMC.cpp, Line 17687
StartDAO : CD-Text - Off
17:48:28 #20 Text 0 File MMC.cpp, Line 22363
Set BUFE: Buffer underrun protection -> ON
17:48:28 #21 Text 0 File MMC.cpp, Line 17915
CueData, Len=32
41 00 00 14 00 00 00 00
41 01 00 10 00 00 00 00
41 01 01 10 00 00 02 00
41 aa 01 14 00 4f 2c 0c
17:48:28 #22 Text 0 File ThreadedTransfer.cpp, Line 269
Pipe memory size 83836800
17:48:46 #23 SPTI -1502 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1502)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x08
Sense Qual: 0x03
CDB Data: 0x2A 00 00 00 01 00 00 00 20 00 00 00
Sense Area: 0x70 00 04 00 00 00 00 0A 00 00 00 00 08 03
Buffer x08ef0240: Len x10000
0xBC 5B 87 08 AA 4C 78 6A 7D 45 08 C4 3F 23 38 BC
0xE5 C4 5D C4 70 A0 89 B2 05 C3 E9 EB 7B 85 02 B2
0x97 DD 88 84 C5 4B 30 E3 BE 96 DE 9C 3F 6D 32 2E
17:48:46 #24 CDR -1502 File Writer.cpp, Line 303
DMA-driver error, CRC error
E: Optiarc DVD RW AD-7170A
17:48:56 #25 SPTI -1135 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x00 00 00 00 00 00 00 00 00 00 00 00
Sense Area: 0xF0 00 03 00 00 01 01 0A 00 00 00 00 0C
17:48:56 #26 CDR -1135 File WriterStatus.cpp, Line 162
Write error
E: Optiarc DVD RW AD-7170A
17:48:56 #27 TRANSFER -24 File WriterStatus.cpp, Line 162
Could not perform end of Disc-at-once
17:49:00 #28 Phase 38 File dlgbrnst.cpp, Line 1762
Burn process failed at 32x (4,800 KB/s)
17:49:00 #29 Text 0 File SCSIPTICommands.cpp, Line 261
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
17:49:02 #30 Text 0 File Cdrdrv.cpp, Line 11185
DriveLocker: UnLockVolume completed
17:49:02 #31 Text 0 File SCSIPTICommands.cpp, Line 424
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
Moderator
|
24. November 2007 @ 12:17 |
Link to this message
|
|
|
