|
|
|
Problem burning with newly installed LG writer, log file enclosed
|
|
|
julesjohn
Newbie
|
21. December 2007 @ 20:03 |
Link to this message
|
Hi
wasnt sure whether to post here or in the dvd writer section. my apologies if this is the wrong section. i have just installed a new LG drive as a slave on the secondary IDE channel and am having trouble getting data DVDs to burn using the same media i have always used successfully with the LG burner it replaced. I have updated the firmware on the drive to the latest version. The Pioneer drive burns the same media fine. would someone pls be kind enough to check over the log and see if there is anything i am missing
***********
****-****-****-****-****-****-****
Windows XP 5.1
IA32
WinAspi: -
NT-SPTI used
Nero Version: 7.8.5.0
Internal Version: 7, 8, 5, 0
(Nero Express)
Recorder: <HL-DT-ST DVD-RAM GSA-H55N>Version: 1.03 - HA 1 TA 1 - 7.8.5.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <TX2437H OHG905G >Version: 2.0B - HA 1 TA 2 - 7.8.5.0
Adapter driver: <SCSI> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : ST3250824A atapi Port 0 ID 0 DMA: On
DiskPeripheral : ST3250824A atapi Port 0 ID 1 DMA: On
CdRomPeripheral : PIONEER DVD-RW DVR-112D atapi Port 1 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVD-RAM GSA-H55N atapi Port 1 ID 1 DMA: On
CdRomPeripheral : TX2437H OHG905G 2.0B aj8i53uh Port 2 ID 0 DMA: Off
=== CDRom-Device-Map ===
PIONEER DVD-RW DVR-112D D: CDRom0
HL-DT-ST DVD-RAM GSA-H55N E: CDRom1
TX2437H OHG905G H: CDRom2
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1535MB (1572336kB)
Free physical memory: 784MB (803568kB)
Memory in use : 48 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
21.12.2007
ISO compilation
16:28:39 #1 Text 0 File SCSIPTICommands.cpp, Line 411
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
16:28:40 #2 Text 0 File Isodoc.cpp, Line 6608
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
16:28:40 #3 ISO9660GEN -11 File Geniso.cpp, Line 3343
First writeable address = 0 (0x00000000)
16:28:40 #4 Text 0 File Burncd.cpp, Line 3499
Turn on Disc-At-Once, using DVD media
16:28:40 #5 Text 0 File DlgWaitCD.cpp, Line 307
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2216511 (492:33.36, 4329MB)
16:28:40 #6 Text 0 File DlgWaitCD.cpp, Line 319
Write in overburning mode: NO (enabled: CD DVD)
16:28:40 #7 Text 0 File DlgWaitCD.cpp, Line 2949
Recorder: HL-DT-ST DVD-RAM GSA-H55N, Media type: DVD-R
Disc Manufacturer: MCC 02 - RG20
Disc Application Code: 64, Disc Physical Code: 193
16:28:40 #8 Text 0 File DlgWaitCD.cpp, Line 493
>>> Protocol of DlgWaitCD activities: <<<
=========================================
16:28:40 #9 Text 0 File ThreadedTransferInterface.cpp, Line 793
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2216512 (2216512) = #2216512/492:33.37
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2216512 blocks [E: HL-DT-ST DVD-RAM GSA-H55N]
--------------------------------------------------------------
16:28:40 #10 Text 0 File ThreadedTransferInterface.cpp, Line 995
Prepare [E: HL-DT-ST DVD-RAM GSA-H55N] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4539416576, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 2216512 | 0 | 0x00
2216512 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
16:28:40 #11 Text 0 File SCSIPTICommands.cpp, Line 209
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
16:28:40 #12 Text 0 File Burncd.cpp, Line 4278
Caching options: cache CDRom or Network-Yes, small files-Yes (<64KB)
16:28:40 #13 Phase 24 File dlgbrnst.cpp, Line 1762
Caching of files started
16:28:42 #14 Text 0 File Burncd.cpp, Line 4397
Cache writing successful.
16:28:42 #15 Phase 25 File dlgbrnst.cpp, Line 1762
Caching of files completed
16:28:42 #16 Phase 36 File dlgbrnst.cpp, Line 1762
Burn process started at 4x (5,540 KB/s)
16:28:42 #17 Text 0 File ThreadedTransferInterface.cpp, Line 2721
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
16:28:42 #18 Text 0 File DVDR.cpp, Line 3192
Recording mode: Sequential Recording Mode
16:28:42 #19 Text 0 File DVDR.cpp, Line 3348
Start write address at LBA 0
DVD high compatibility mode: Yes
16:28:42 #20 SPTI -1066 File SCSIPassThrough.cpp, Line 179
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAC 00 00 00 00 00 00 00 00 64 00 00
Sense Area: 0x70 00 05 00 00 00 00 0E 00 00 00 00 24
Buffer x052f0840: Len x648
16:28:42 #21 Text 0 File Cdrdrv.cpp, Line 9859
---- Disc Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Revision number of maximum recording speed: -
Revision number of minimum recording speed: -
Revision number table of recording speed: - - - - - - -
Class: 0
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ..■... .........
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
16:28:42 #22 Text 0 File ThreadedTransfer.cpp, Line 269
Pipe memory size 83836800
16:40:48 #23 SPTI -1119 File SCSIPassThrough.cpp, Line 179
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1119)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x09
Sense Qual: 0x03
CDB Data: 0x2A 00 00 1B 79 E0 00 00 20 00 00 00
Sense Area: 0x70 00 04 00 00 00 00 0E 00 00 00 00 09 03
Buffer x0a470a00: Len x10000
0x5B C9 B1 32 86 83 43 C1 9B D3 21 6D 40 0A 58 04
0x00 3C 41 35 D1 A2 44 11 5D 70 C0 20 4E B4 A6 F7
0x34 55 16 B2 94 5B B5 53 C6 AD 03 67 68 8A 15 5A
16:40:48 #24 CDR -1119 File Writer.cpp, Line 303
Track following error
E: HL-DT-ST DVD-RAM GSA-H55N
16:40:48 #25 Text 0 File DVDR.cpp, Line 3750
EndDAO: Last written address was 1800671 (1B79DFh)
16:40:48 #26 Phase 38 File dlgbrnst.cpp, Line 1762
Burn process failed at 4x (5,540 KB/s)
16:40:49 #27 Text 0 File SCSIPTICommands.cpp, Line 254
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
16:40:49 #28 Text 0 File Cdrdrv.cpp, Line 11214
DriveLocker: UnLockVolume completed
16:40:49 #29 Text 0 File SCSIPTICommands.cpp, Line 411
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
|
Advertisement
|
 |
|
|
|
julesjohn
Newbie
|
21. December 2007 @ 20:07 |
Link to this message
|
The second attempt to burn gave a different error to the "track following error" produced above, this time giving an "unspecified recorder error"? i am wondering whether the drive is caput and i need to RMA the unit under warranty.. dma is on, aspi layers are working fine/operational according to the nero info tool and the aspicheck.exe utility. Can anyone shed any light on my problem. Thanks in advance for any assistance.
2nd log
----------------
***********
****-****-****-****-****-****-****
Windows XP 5.1
IA32
WinAspi: -
NT-SPTI used
Nero Version: 7.8.5.0
Internal Version: 7, 8, 5, 0
(Nero Express)
Recorder: <HL-DT-ST DVD-RAM GSA-H55N>Version: 1.03 - HA 1 TA 1 - 7.8.5.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <TX2437H OHG905G >Version: 2.0B - HA 1 TA 2 - 7.8.5.0
Adapter driver: <SCSI> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : ST3250824A atapi Port 0 ID 0 DMA: On
DiskPeripheral : ST3250824A atapi Port 0 ID 1 DMA: On
CdRomPeripheral : PIONEER DVD-RW DVR-112D atapi Port 1 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVD-RAM GSA-H55N atapi Port 1 ID 1 DMA: On
CdRomPeripheral : TX2437H OHG905G 2.0B aj8i53uh Port 2 ID 0 DMA: Off
=== CDRom-Device-Map ===
PIONEER DVD-RW DVR-112D D: CDRom0
HL-DT-ST DVD-RAM GSA-H55N E: CDRom1
TX2437H OHG905G H: CDRom2
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1535MB (1572336kB)
Free physical memory: 669MB (685564kB)
Memory in use : 56 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
22.12.2007
ISO compilation
20:35:40 #1 Text 0 File SCSIPTICommands.cpp, Line 411
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
20:35:40 #2 Text 0 File Isodoc.cpp, Line 6608
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
20:35:41 #3 ISO9660GEN -11 File Geniso.cpp, Line 3343
First writeable address = 0 (0x00000000)
20:35:41 #4 Text 0 File Burncd.cpp, Line 3499
Turn on Disc-At-Once, using DVD media
20:35:41 #5 Text 0 File DlgWaitCD.cpp, Line 307
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1872239 (416:03.14, 3656MB)
20:35:41 #6 Text 0 File DlgWaitCD.cpp, Line 319
Write in overburning mode: NO (enabled: CD DVD)
20:35:41 #7 Text 0 File DlgWaitCD.cpp, Line 2949
Recorder: HL-DT-ST DVD-RAM GSA-H55N, Media type: DVD-R
Disc Manufacturer: MCC 02 - RG20
Disc Application Code: 64, Disc Physical Code: 193
20:35:41 #8 Text 0 File DlgWaitCD.cpp, Line 493
>>> Protocol of DlgWaitCD activities: <<<
=========================================
20:35:41 #9 Text 0 File ThreadedTransferInterface.cpp, Line 793
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1872240 (1872240) = #1872240/416:3.15
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1872240 blocks [E: HL-DT-ST DVD-RAM GSA-H55N]
--------------------------------------------------------------
20:35:41 #10 Text 0 File ThreadedTransferInterface.cpp, Line 995
Prepare [E: HL-DT-ST DVD-RAM GSA-H55N] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3834347520, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 1872240 | 0 | 0x00
1872240 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
20:35:41 #11 Text 0 File SCSIPTICommands.cpp, Line 209
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
20:35:41 #12 Text 0 File Burncd.cpp, Line 4278
Caching options: cache CDRom or Network-Yes, small files-Yes (<64KB)
20:35:41 #13 Phase 24 File dlgbrnst.cpp, Line 1762
Caching of files started
20:35:41 #14 Text 0 File Burncd.cpp, Line 4397
Cache writing successful.
20:35:41 #15 Phase 25 File dlgbrnst.cpp, Line 1762
Caching of files completed
20:35:41 #16 Phase 36 File dlgbrnst.cpp, Line 1762
Burn process started at 4x (5,540 KB/s)
20:35:41 #17 Text 0 File ThreadedTransferInterface.cpp, Line 2721
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
20:35:41 #18 Text 0 File DVDR.cpp, Line 3192
Recording mode: Sequential Recording Mode
20:35:41 #19 Text 0 File DVDR.cpp, Line 3348
Start write address at LBA 0
DVD high compatibility mode: Yes
20:35:41 #20 SPTI -1066 File SCSIPassThrough.cpp, Line 179
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAC 00 00 00 00 00 00 00 00 64 00 00
Sense Area: 0x70 00 05 00 00 00 00 0E 00 00 00 00 24
Buffer x09a01140: Len x648
20:35:41 #21 Text 0 File Cdrdrv.cpp, Line 9859
---- Disc Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Revision number of maximum recording speed: -
Revision number of minimum recording speed: -
Revision number table of recording speed: - - - - - - -
Class: 0
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
20:35:41 #22 Text 0 File ThreadedTransfer.cpp, Line 269
Pipe memory size 83836800
20:48:23 #23 SPTI -1 File SCSIPassThrough.cpp, Line 179
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x80
Sense Qual: 0x04
CDB Data: 0x2A 00 00 19 C2 E0 00 00 20 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 0E 00 00 00 00 80 04
Buffer x0c0d5a80: Len x10000
0x4E B7 4E 95 CA BE B5 1B 7B BC C1 F1 B0 A9 C6 98
0xC2 82 8F 36 36 F6 5E EA 68 F1 BC 02 DF 16 AF 08
0x08 98 84 83 A3 19 B3 1B 03 0B E5 6A 24 E8 0E 1F
20:48:23 #24 CDR -1 File Writer.cpp, Line 303
Unspecified Recorder Error
E: HL-DT-ST DVD-RAM GSA-H55N
20:48:24 #25 Text 0 File DVDR.cpp, Line 3750
EndDAO: Last written address was 1688287 (19C2DFh)
20:48:24 #26 Phase 38 File dlgbrnst.cpp, Line 1762
Burn process failed at 4x (5,540 KB/s)
20:48:24 #27 Text 0 File SCSIPTICommands.cpp, Line 254
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
20:48:24 #28 Text 0 File Cdrdrv.cpp, Line 11214
DriveLocker: UnLockVolume completed
20:48:24 #29 Text 0 File SCSIPTICommands.cpp, Line 411
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
AfterDawn Addict
1 product review
|
21. December 2007 @ 21:48 |
Link to this message
|
Quote:
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
This error with other burning programs comes out as Invalid field in CDB, which from what I gather
Quote:
usually means the copy process stopped because the writer ran out of data (connection lost to the pc) or the file you want to copy might contain corrupt data.
, or it could be because the source file is corrupted or you have something running in the computer that interfered and stopped the data flow, or a loose cable or bad discs.
Then, you have another error
Quote:
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1119)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x09
Sense Qual: 0x03
That's a spindle servo error if I am not mistaking( the motor that spins the disk),the speed the disc is spinning is not correct. It could be anythings from not spinning at all to not spinning at the correct speed.
It could be a problem with the motor or mechanism that clamps the disk to the spindle but it could be bad discs. If the center hole of the disc is not correct it could cause this error also.
Try different and better discs(even though you used the same before, you could have a bad batch suddenly). Worst case scenario, you need a new burner.
http://www.mscience.com/faq18.html
This message has been edited since posting. Last time this message was edited on 21. December 2007 @ 22:09
|
|
julesjohn
Newbie
|
22. December 2007 @ 12:55 |
Link to this message
|
|
thanks for your input cyprusrom i'll check the cables, and try better disks also, before i condemn the burner. thanks again
|
|
Advertisement
|
|
|
AfterDawn Addict
1 product review
|
22. December 2007 @ 13:05 |
Link to this message
|
The media that you are using (Apple?) never used it or heard of it as being recommended. Buy some Verbatim, Taiyo Yuden or Sony/Maxell( made in Japan, they are different from the Taiwanese counterparts). Also, try burning a different file, the one you attempted could be corrupt.
P.S I see that this particular media code MCC 02RG20 comes out under a few obscure different names, Apple,Blue Chip, Blue Pack,Infinity, Hypson....,and also is the code for Verbatim (DataLifePlus).I am not sure what brand you are using,but they might not be real Mitsubishi dye, there are a lot of fakes out there.
This message has been edited since posting. Last time this message was edited on 22. December 2007 @ 13:34
|
|
