|
|
|
BenQ DW 1620 quit recognizing my blank DVD-R's
|
|
|
Karnmar
Newbie
|
1. January 2008 @ 20:32 |
Link to this message
|
I attached a copy of the nero error log. I have updated my firmware since this failed copy. I am using Phillips DVD-R, and TDK DVD-R media.
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM
NT-SPTI used
Nero Version: 7.0.1.2
Internal Version: 7, 0, 1, 2
(Nero Express)
Recorder: <BENQ DVD DD DW1620> Version: B7V9 - HA 1 TA 0 - 7.0.1.2
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <BENQ DVD DD DW1620 >Version: B7V9 - HA 1 TA 0 - 7.0.1.2
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : SAMSUNG SP0802N atapi Port 0 ID 0 DMA: On
CdRomPeripheral : BENQ DVD DD DW1620 atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
BENQ DVD DD DW1620 D: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1048052kB)
Free physical memory: 630MB (645384kB)
Memory in use : 38 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
16.12.2007
===== Disc-Copy over image - 1st step : Copy to image ...
8:28:12 PM #1 Text 0 File SCSIPassThrough.cpp, Line 58
Error on LockVolume: Access is denied.
8:28:12 PM #2 Text 0 File SCSIPassThrough.cpp, Line 119
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
8:28:12 PM #3 Text 0 File Cdrdrv.cpp, Line 9597
SPTIDismountVolume not successfull
8:28:32 PM #4 Text 0 File SCSIPassThrough.cpp, Line 58
Error on LockVolume: The volume for a file has been externally altered so that the opened file is no longer valid.
8:28:32 PM #5 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 192KB of Memory
8:28:32 PM #6 Text 0 File Reader.cpp, Line 124
Reader running
8:28:32 PM #7 Text 0 File Writer.cpp, Line 113
Writer Image Recorder running
8:28:32 PM #8 Text 0 File DVDCopy.cpp, Line 292
DVD Track-Information from source disc:
Media Type: DVD+R
S01 T01 Con 0x14 Start 0 Len 2224112 (gap 0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0)
8:28:32 PM #9 Text 0 File DVDCopy.cpp, Line 405
Max -1 tracks of 1 allowed to copy
1: 0 - 2224112 = 2224112, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)
8:28:32 PM #10 Text 0 File Burncd.cpp, Line 3302
Turn on Disc-At-Once, using DVD media
8:28:32 PM #11 Text 0 File DlgWaitCD.cpp, Line 279
Last possible write address on media: 4718591 (9215MB)
Last address to be written: 2224111 (4343MB)
8:28:32 PM #12 Text 0 File DlgWaitCD.cpp, Line 291
Write in overburning mode: NO (enabled: CD)
8:28:32 PM #13 Text 0 File DlgWaitCD.cpp, Line 458
>>> Protocol of DlgWaitCD activities: <<<
=========================================
8:28:33 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - Data (mode 1))
2 indices, index0 (150) not provided
original disc pos #0 + 2224112 (2224112) = #2224112/494:14.62
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2224112 blocks [Image Recorder]
--------------------------------------------------------------
8:28:33 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [Image Recorder] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4554981376, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2224112 | lead-out | 1 | 0x41 | 0x00
8:28:33 PM #16 Phase 120 File dlgbrnst.cpp, Line 1725
Creating the image for burning
8:28:33 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
8:38:17 PM #18 Text 0 File WriterStatus.cpp, Line 116
<Image Recorder> start writing Lead-Out at LBA 2224112 (21EFF0h), length 0 blocks
8:38:17 PM #19 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
8:38:18 PM #20 Phase 121 File dlgbrnst.cpp, Line 1725
Creating Image completed successfully
===== Disc-Copy over image - 2nd step : Burn the image ...
8:38:42 PM #1 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 81920KB of Memory
8:38:42 PM #2 Text 0 File Reader.cpp, Line 124
Reader running
8:38:42 PM #3 Text 0 File Writer.cpp, Line 113
Writer D: BENQ DVD DD DW1620 running
8:38:42 PM #4 IMAGEGEN -10 File ImageGen.cpp, Line 366
Image was written as DAO.
DAOI:
MediaCatalogNumber = ''
TocType = 0x40
Finalized = 0
First/Last Track = 1 / 1
1: ISRC = ''
Blocksize = 2048
TrackMode = 'TRM_DATA_MODE1'
TrackConfig = 0x00
First/Last Index = 0 / 1
Index0FilePos = 0, Index1FilePos = 0, NextTrackFilePos = 4554981376
CUES:
0: Ctrl=0x41 Trk= 0 (0x00) Index=00 Start=00:00.00 ( 0) RecDep=0x00
1: Ctrl=0x41 Trk= 1 (0x01) Index=00 Start=00:00.00 ( 0) RecDep=0x00
2: Ctrl=0x41 Trk= 1 (0x01) Index=01 Start=00:00.00 ( 0) RecDep=0x00
3: Ctrl=0x41 Trk=110 (0xAA) Index=01 Start=494:14.62 ( 2224112) RecDep=0x00
MTYP: Mediumtype = DVD (old format) (0x1C)
Image file name: <C:\Documents and Settings\KarrynMary\My Documents\TempImage.nrg>
8:38:43 PM #5 Text 0 File Burncd.cpp, Line 3302
Turn on Disc-At-Once, using DVD media
8:39:23 PM #6 Text 0 File DlgWaitCD.cpp, Line 279
Last possible write address on media: 2298495 (4489MB)
Last address to be written: 2224111 (4343MB)
8:39:23 PM #7 Text 0 File DlgWaitCD.cpp, Line 291
Write in overburning mode: NO (enabled: CD)
8:39:23 PM #8 Text 0 File DlgWaitCD.cpp, Line 2578
Recorder: BENQ DVD DD DW1620, Media type: DVD-R
Disc Manufacturer: CMC MA - G. AM3
Disc Application Code: 64, Disc Physical Code: 193
8:39:23 PM #9 Text 0 File DlgWaitCD.cpp, Line 458
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: Unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD+R DL.)
8:39:23 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - DVD-ROM)
2 indices, index0 (150) not provided
original disc pos #0 + 2224112 (2224112) = #2224112/494:14.62
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2224112 blocks [D: BENQ DVD DD DW1620]
--------------------------------------------------------------
8:39:23 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [D: BENQ DVD DD DW1620] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4554981376, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2224112 | lead-out | 1 | 0x41 | 0x00
8:39:23 PM #12 Text 0 File SCSIPassThrough.cpp, Line 36
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
8:39:23 PM #13 Phase 36 File dlgbrnst.cpp, Line 1725
Burn process started at 4x (5,540 KB/s)
8:39:23 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
8:39:23 PM #15 Text 0 File DVDR.cpp, Line 2580
Recording mode: Sequential Recording Mode for Multisession
8:39:23 PM #16 Text 0 File MMC.cpp, Line 21611
Set BUFE: Seamless Link -> ON
8:39:23 PM #17 Text 0 File DVDR.cpp, Line 2735
Start write address at LBA 0
DVD high compatibility mode: Yes
8:39:23 PM #18 Text 0 File Cdrdrv.cpp, Line 8411
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
8:53:51 PM #19 Text 0 File WriterStatus.cpp, Line 116
<D: BENQ DVD DD DW1620> start writing Lead-Out at LBA 2224112 (21EFF0h), length 0 blocks
8:53:51 PM #20 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
8:53:51 PM #21 Text 0 File DVDR.cpp, Line 2978
EndDAO: Last written address was 2224111
8:53:53 PM #22 Phase 133 File dlgbrnst.cpp, Line 1725
Writing short lead-out
8:54:48 PM #23 Phase 37 File dlgbrnst.cpp, Line 1725
Burn process completed successfully at 4x (5,540 KB/s)
8:54:48 PM #24 Phase 78 File dlgbrnst.cpp, Line 1725
Data verification started
9:04:16 PM #25 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
9:04:16 PM #26 SectorVerify 11 File Cdrdrv.cpp, Line 9531
Sector 1098795 on disc has different content to source
9:04:16 PM #27 Phase 81 File dlgbrnst.cpp, Line 1725
Data verification failed
Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 8/19/2005 5:00:00 AM
File 'Drivers\PXHELP20.SYS': Ver=3.00.09a, size=46080 bytes, created 8/19/2005 5:00:00 AM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
|
Advertisement
|
|
|
|
Senior Member
|
2. January 2008 @ 05:54 |
Link to this message
|
This message has been edited since posting. Last time this message was edited on 2. January 2008 @ 06:04
|
|
Karnmar
Newbie
|
2. January 2008 @ 07:10 |
Link to this message
|
|
Thanks.... I think you might be on to something. I will try some better media.
KarrynMary
|
AfterDawn Addict
3 product reviews
|
2. January 2008 @ 09:21 |
Link to this message
|
Made in Japan Taiyo Yuden, Verbatim, or Sony render the best results.
|
AfterDawn Addict
|
4. January 2008 @ 01:45 |
Link to this message
|
arggggggggggggggggggggggg
nightmare on elm street
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 8/19/2005 5:00:00 AM
get rid of this MoFo uninstall roxio apps and/ nero InCD and then after al that get the roxio ZAP tool to clear registry
and you may stand a very small minute miniscule microscopic chance of success with those discs your using?
burn slow and dont make project too big that it fills disc
Nothing here to see, move along folks.
 |
AfterDawn Addict
|
10. January 2008 @ 05:54 |
Link to this message
|
Karnmar: I got a couple of Benq 1620's.They are very good burners.
Office Depot +16x works very well.They're on sale this week for $20 per 100 pk.
Verbatim +16x and +16x Sony also works very well.
HP a1118x-b/athlon 64-3300+/BenQ 1650 BCDC/LG 8163B/Modded Wii/Epson-R300 and Ty Watershields!!! |
Senior Member
|
10. January 2008 @ 07:43 |
Link to this message
|
Hey,
Originally posted by saugmon:
Office Depot +16x works very well.They're on sale this week for $20 per 100 pk.
Are those Office Depot a gamble all the time, or they always have the same media id ?
And what is the media id of those ?
Is there any Office Depot DVD-R too ? Ever bought those ?
Just curious, I live for Taiyo Yuden and Verbatims :)
VSO Software Golden Membership Proud Owner / VSO Software Beta Tester
|
|
Amir89
Senior Member
|
10. January 2008 @ 08:15 |
Link to this message
|
Karnmar:
As Rotary mentioned..
NEVER, EVER use Nero's InCD application.
It uninstalls your ASPI drivers for your optical drives and generally makes burning/reading/copying discs a nightmare, as it controls the drive permissions and replaces your ASPI drivers with some bs Nero ones.
It's a horrible app., don't use it.
And make sure to reinstall your ASPI drivers after uninstalling it as it doesn't replace them.
Also get some better media (blank discs) ASAP! Your using CMC-MAG, which is just about the worst of the worst. Let those three letters be a lesson to you (CMC). Try Verbatim.
cougar_ii:
Office Depots are pretty good quality 9 times out of 10 their made by Ritek or Ricoh, both excellent manufacturers, just check the dyes before using.
|
AfterDawn Addict
|
10. January 2008 @ 15:35 |
Link to this message
|
cougar: Those Office Depot discs are very good. Their 8x coded as Ritek. Their +16x are either Ricoh or Ritek. Lately,they've been Riteks. Even some +RW I picked up were Ritek. I believe their DL media is also ritek,and the dash format should also yield Ritek. The only dash I use is on the internet media like Taiyo Yuden Watershields or Shiny inkjet printables.
OFFICE DEPOT:
+8X MADE IN TAIWAN: RITEK-R03
+16X MADE IN TAIWAN: RITEK-P16
+16X MADE IN TAIWAN: RICOHJPN-R03
+4x RW,Made in Taiwan: Ritek-004
They currently have them on sale again this week,20 cents each. Black friday,they were 18 cents each,buy my stosh of 200 didn't 3 weeks. Sunday,I picked up their last 5 spindles of 100 pks of +16x. I just popped in the 1st one in my 1620 and she's burning right now. This spindle is the Ricohs,here it is:
----------------------------------------------------------------------------
Unique Disc Identifier : [DVD+R:RICOHJPN-R03-004]
----------------------------------------------------------------------------
Disc & Book Type : [DVD+R] - [Not Available]
Manufacturer Name : [Ricoh Co. Ltd.]
Manufacturer ID : [RICOHJPN]
Media Type ID : [R03]
Product Revision : [004]
Blank Disc Capacity : [2,295,104 Sectors = 4.70 GB (4.38 GiB)]
Recording Speeds : [1x-2.4x , 4x , 6x-8x , 6x-16x]
----------------------------------------------------------------------------
[ DVD Identifier - http://DVD.Identifier.CDfreaks.com ]
----------------------------------------------------------------------------
That's the 1st OD ricoh's I've gotten in over a year,still very good media.Hard telling what the other 4 pks are.The other brick and mortar stores,I don't even bother because OD has some very good media and great prices when on sale.
BTW: Of the 5 different batches of +16x memorex in an assortment of quantity pack, All coded the same Ricohjpn-R03-004. I won't even bother with maxell anymore. Strickly Sony,OD,and Memorex +16x if I'm in a pinch.
HP a1118x-b/athlon 64-3300+/BenQ 1650 BCDC/LG 8163B/Modded Wii/Epson-R300 and Ty Watershields!!!
|
AfterDawn Addict
|
10. January 2008 @ 17:33 |
Link to this message
|
|
i use RITEK GO5 dye coding, not heard of the others above i have used thousands to date and this dye is very good.
Nothing here to see, move along folks.
|
|
Advertisement
|
|
|
AfterDawn Addict
|
18. January 2008 @ 01:00 |
Link to this message
|
Originally posted by Rotary:
arggggggggggggggggggggggg
nightmare on elm street
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 8/19/2005 5:00:00 AM
get rid of this MoFo uninstall roxio apps and/ nero InCD and then after al that get the roxio ZAP tool to clear registry
and you may stand a very small minute miniscule microscopic chance of success with those discs your using?
burn slow and dont make project too big that it fills disc
You don't have to install Roxio anything to get cdralw2k.sys on your rig.
The drivers may be installed by Easy CD Creator or Windows Media Player or Real Jukebox.
|
|
