|
|
|
Samsung SH182M dieing?? urgent help needed
|
|
|
akuma69
Junior Member
|
16. January 2008 @ 22:03 |
Link to this message
|
i got a Samsung SH182M drive last year January 2007. I did not use the drive alot. Only burnt probably 3-5 dvds with it and 3-5 cds. They all worked good. Thats about it. Around last year near september I noticed my drive could not read some dvds. The light on the drive kept blinking. But my laptop drive could read it. I just thought it was just a "once off" hick up of my drive. And then I used the drive about 2 weeks ago to try to burn something using nero 7.2 and it stopped half way and gave power calibration error. I looked at the half burnt dvd and saw that the track had uneven colour. Looked like as if the burner "stopped and started" alot during the burn. Just to add, I do not have a buffer under run problem. And then today I tried to burn files into a TDK dvd+r using nero 7.2, and it gave me a power calibration error. And the drive cannot read TDK dvd+r and Verbatim dvd+r disks. These are good quality disk. The drive can read original disks though.
So i dont think it is the disks, it must be the drive. I read the power calibration sticky and i think my drive is dieing. Any suggestions? I updated to the latest firmware and still the same thing.
This is my log from nero
=======================================
ddddddd
Private
1C80-0000-19E5-MA2X-4005-9532-2638
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 2:54:32 PM
NT-SPTI used
Nero Version: 7.2.3.2
Internal Version: 7, 2, 3, 2
Recorder: <TSSTcorp CD/DVDW SH-S182M>Version: SB05 - HA 1 TA 5 - 7.2.3.2
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <KJ3781P WJN349I >Version: 1.0 - HA 1 TA 3 - 7.2.3.2
Adapter driver: <SCSI> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : ST380021A nvatabus Port 0 ID 0 DMA: Off
DiskPeripheral : ST3250620A nvatabus Port 0 ID 1 DMA: Off
CdRomPeripheral : TSSTcorp CD/DVDW SH-S182M nvatabus Port 0 ID 2 DMA: Off
CdRomPeripheral : NERO IMAGEDRIVE2 2.26 imagedrv Port 2 ID 0 DMA: Off
CdRomPeripheral : KJ3781P WJN349I 1.0 dtscsi Port 3 ID 0 DMA: Off
CdRomPeripheral : KJ3781P WJN349I 1.0 dtscsi Port 3 ID 1 DMA: Off
=== CDRom-Device-Map ===
TSSTcorp CD/DVDW SH-S182M F: CDRom5
KJ3781P WJN349I G: CDRom3
NERO IMAGEDRIVE2 H: CDRom1
KJ3781P WJN349I I: CDRom2
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 168MB (172316kB)
Memory in use : 67 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
17.1.2008
Burn DVD Image
2:00:49 PM #1 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 72704KB of Memory
2:00:49 PM #2 Text 0 File Reader.cpp, Line 124
Reader running
2:00:49 PM #3 Text 0 File Writer.cpp, Line 113
Writer F: TSSTcorp CD/DVDW SH-S182M running
2:00:49 PM #4 Text 0 File Burncd.cpp, Line 3400
Turn on Disc-At-Once, using DVD media
2:00:50 PM #5 Text 0 File DlgWaitCD.cpp, Line 289
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 1410593 (313:27.68, 2755MB)
2:00:50 PM #6 Text 0 File DlgWaitCD.cpp, Line 301
Write in overburning mode: NO (enabled: CD)
2:00:50 PM #7 Text 0 File DlgWaitCD.cpp, Line 2715
Recorder: TSSTcorp CD/DVDW SH-S182M, Media type: DVD+R
Disc Manufacturer ID: TDK, Media Type ID: 003, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 7
2:00:50 PM #8 Text 0 File DlgWaitCD.cpp, Line 473
>>> Protocol of DlgWaitCD activities: <<<
=========================================
2:00:50 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 1410594 (1410594) = #1410594/313:27.69
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1410594 blocks [F: TSSTcorp CD/DVDW SH-S182M]
--------------------------------------------------------------
2:00:50 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [F: TSSTcorp CD/DVDW SH-S182M] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 2888896512, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1410594 | lead-out | 1 | 0x41 | 0x00
2:00:50 PM #11 Text 0 File SCSIPassThrough.cpp, Line 39
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
2:00:50 PM #12 Text 0 File SCSIPassThrough.cpp, Line 84
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
2:00:50 PM #13 Phase 36 File dlgbrnst.cpp, Line 1730
Burn process started at 4x (5,540 KB/s)
2:00:50 PM #14 SPTI -1066 File SCSIPassThrough.cpp, Line 291
F: CdRom5: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 00 00 00 00 00 00 FF 40 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24
Buffer x055d4200: Len x4000
2:00:50 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
2:00:50 PM #16 Text 0 File Cdrdrv.cpp, Line 8995
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 7 h
Disc Manufacturer ID: TDK.....
Media type ID: 003
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 07 54 44 4B 00 00 - 00 00 00 30 30 33 00 38 ...TDK.....003.8
23 54 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 #T..............
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
2:00:50 PM #17 Text 0 File Cdrdrv.cpp, Line 8995
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 7 h
Disc Manufacturer ID: TDK.....
Media type ID: 003
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 07 54 44 4B 00 00 - 00 00 00 30 30 33 00 38 ...TDK.....003.8
23 54 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 #T..............
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
2:00:50 PM #18 Text 0 File Cdrdrv.cpp, Line 8995
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 7 h
Disc Manufacturer ID: TDK.....
Media type ID: 003
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 07 54 44 4B 00 00 - 00 00 00 30 30 33 00 38 ...TDK.....003.8
23 54 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 #T..............
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
2:00:50 PM #19 Text 0 File DVDR.cpp, Line 7628
Drive: TSSTcorp CD/DVDW SH-S182M
Book Type request [TSST]: DVD-ROM
Changing the Book Type was finished successfully, return code 0
2:00:50 PM #20 CDR -1211 File DVDR.cpp, Line 5862
Book Type set to: DVD-ROM
2:00:50 PM #21 Text 0 File DVDPlusRW.cpp, Line 650
Start write address at LBA 0
DVD high compatibility mode: Yes
2:01:46 PM #22 SPTI -1106 File SCSIPassThrough.cpp, Line 291
F: CdRom5: SCSIStatus(x02) WinError(0) NeroError(-1106)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
Sense Area: 0x71 00 03 00 00 00 00 0A 00 00 00 00 73 03
Buffer x0a2d0000: Len x10000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
2:01:46 PM #23 CDR -1106 File Writer.cpp, Line 302
Power calibration error
F: TSSTcorp CD/DVDW SH-S182M
2:01:46 PM #24 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
2:01:46 PM #25 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
2:01:47 PM #26 SPTI -1046 File SCSIPassThrough.cpp, Line 291
F: CdRom5: SCSIStatus(x02) WinError(0) NeroError(-1046)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x06
CDB Data: 0x5B 01 05 00 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 30 06
2:01:47 PM #27 Phase 127 File dlgbrnst.cpp, Line 1730
Generating DVD high compatibility borders
2:01:47 PM #28 CDR -1046 File WriterStatus.cpp, Line 167
Illegal disc
F: TSSTcorp CD/DVDW SH-S182M
2:01:47 PM #29 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once
2:01:47 PM #30 Phase 38 File dlgbrnst.cpp, Line 1730
Burn process failed at 4x (5,540 KB/s)
Existing drivers:
File 'Drivers\scsiport.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=96256 bytes, created 8/3/2004 10:59:42 PM (Adapter driver for src)
File 'Drivers\scsiscan.sys': Ver=5.1.2600.0 (XPClient.010817-1148), size=10880 bytes, created 8/17/2001 2:53:26 PM (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
|
geburuh
Member
|
17. January 2008 @ 04:30 |
Link to this message
|
|
If your warrenty is in effect you better jump on it.
Also download DVDfabHD decrypter & use free trial of Clone 2 to see if it will burn ( backup one of your movies ) Also try -r disks.
h
|
|
