|
|
|
Could Not Perform End of Disc Once & Burn Process Failed at 16x
|
|
|
venaltwin
Newbie
|
23. January 2008 @ 18:57 |
Link to this message
|
I have been using Nero 7 Ultra edition in conjunction with Dvd Shrink 3.2.0.15 for the last couple years with minimal problems. Lately I have been getting quite a few burn failures. I usually get the "Could Not Perform End of Disc Once" message followed by "
Burn Process Failed at 16x". I recently uninstalled the Nero 7 version that I purchased using the Nero Clean tool. Then I download from the Nero site the latest update 7.10.1.2 and installed that. I hoped that it would solve my problem with Nero Burning ROM. My problems have only increased. I am using Sony DVD+R Ver. 1.3/1x-16x discs. I have read through quite a few different threads over the last couple of weeks and attempted to implement some of those solutions but none seem to work including updating my Philips DVD firmware. I have included a copy of the error log that I get each time I burn. If anyone could help that would be great.
xxxx-xxxx-xxxx-xxxx-xxxx-xxx
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=169792 bytes, created 3/14/2007 12:43:16 PM
NT-SPTI used
Nero API version: 7.10.1.2
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Nero\Nero 7\Core\
Application: ahead\Nero - Burning Rom
Internal Version: 7, 10, 1, 2
Recorder: <PHILIPS DVD+-RW DVD8631> Version: GD30 - HA 1 TA 3 - 7.10.1.2
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
=== Scsi-Device-Map ===
DiskPeripheral : ST380013AS iaStor Port 0 ID 0 DMA: On
CdRomPeripheral : SAMSUNG CD-R/RW SW-252S atapi Port 1 ID 0 DMA: On
CdRomPeripheral : PHILIPS DVD+-RW DVD8631 atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
SAMSUNG CD-R/RW SW-252S D: CdRom0
PHILIPS DVD+-RW DVD8631 E: CdRom3
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
BUFE : 0
Physical memory : 510MB (522332kB)
Free physical memory: 194MB (198692kB)
Memory in use : 61 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
23.1.2008
NeroAPI
2:34:45 PM #1 Phase 112 File APIProgress.cpp, Line 285
DVD-Video files reallocation started
2:34:45 PM #2 Phase 114 File APIProgress.cpp, Line 285
DVD-Video files reallocation completed (no file modified)
2:34:45 PM #3 Phase 111 File APIProgress.cpp, Line 285
DVD-Video files sorted
2:34:45 PM #4 Text 0 File SCSIPTICommands.cpp, Line 424
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
2:34:46 PM #5 Text 0 File AudioCompilationImpl.cpp, Line 838
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.
2:34:46 PM #6 ISO9660GEN -11 File Geniso.cpp, Line 3343
First writeable address = 0 (0x00000000)
2:34:46 PM #7 ISO9660GEN -11 File Geniso.cpp, Line 3343
First writeable address = 0 (0x00000000)
2:34:46 PM #8 Text 0 File Burncd.cpp, Line 3508
Turn on Disc-At-Once, using DVD media
2:34:46 PM #9 Text 0 File DlgWaitCD.cpp, Line 307
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2135023 (474:26.73, 4169MB)
2:34:46 PM #10 Text 0 File DlgWaitCD.cpp, Line 319
Write in overburning mode: NO
2:34:46 PM #11 Text 0 File DlgWaitCD.cpp, Line 2972
Recorder: PHILIPS DVD+-RW DVD8631, Media type: DVD+R
2:34:46 PM #12 Text 0 File DlgWaitCD.cpp, Line 493
>>> Protocol of DlgWaitCD activities: <<<
=========================================
2:34:46 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 793
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2135024 (2135024) = #2135024/474:26.74
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2135024 blocks [E: PHILIPS DVD+-RW DVD8631]
--------------------------------------------------------------
2:34:46 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 995
Prepare [E: PHILIPS DVD+-RW DVD8631] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4372529152, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 2135024 | 0 | 0x00
2135024 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
2:34:46 PM #15 Text 0 File SCSIPTICommands.cpp, Line 215
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME
2:34:46 PM #16 Text 0 File Burncd.cpp, Line 4294
Caching options: cache CDRom or Network-No, small files-Yes (<32KB)
2:34:46 PM #17 Phase 24 File APIProgress.cpp, Line 285
Caching of files started
2:34:46 PM #18 Text 0 File Burncd.cpp, Line 4413
Cache writing successful.
2:34:46 PM #19 Phase 25 File APIProgress.cpp, Line 285
Caching of files completed
2:34:46 PM #20 Phase 36 File APIProgress.cpp, Line 285
Burn process started at 4x (5,540 KB/s)
2:34:46 PM #21 Text 0 File ThreadedTransferInterface.cpp, Line 2721
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
2:34:46 PM #22 SPTI -1066 File SCSIPassThrough.cpp, Line 179
CdRom3: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 00 00 00 00 00 00 00 08 04 00 00
Sense Area: 0x70 00 05 00 00 00 00 12 00 00 00 00 24
Buffer x0c5130c0: Len x804
2:34:46 PM #23 Text 0 File DVDR.cpp, Line 7403
Drive: PHILIPS DVD+-RW DVD8631
Book Type request [gen]: DVD-ROM, write to EEPROM
Changing the Book Type was finished successfully, return code 0
2:34:46 PM #24 CDR -1207 File DVDR.cpp, Line 6477
Book Type automatically set to: DVD-ROM
2:34:46 PM #25 Text 0 File DVDPlusRW.cpp, Line 675
Start write address at LBA 0
DVD high compatibility mode: No
2:34:46 PM #26 Text 0 File ThreadedTransfer.cpp, Line 269
Pipe memory size 74390400
2:34:52 PM #27 SPTI -1015 File SCSIPassThrough.cpp, Line 179
CdRom3: SCSIStatus(x02) WinError(0) NeroError(-1015)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x02
CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 12 00 00 00 00 73 02
Buffer x190a0040: Len x10000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
2:34:52 PM #28 CDR -1015 File Writer.cpp, Line 303
Calibration area full
E: PHILIPS DVD+-RW DVD8631
2:34:53 PM #29 SPTI -1176 File SCSIPassThrough.cpp, Line 179
CdRom3: SCSIStatus(x02) WinError(0) NeroError(-1176)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x72
Sense Qual: 0x03
CDB Data: 0x5B 01 06 00 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 12 00 00 00 00 72 03
2:34:53 PM #30 Text 0 File DVDPlusRW.cpp, Line 935
EndDAO: Last written address 0
2:34:53 PM #31 Text 0 File DVDR.cpp, Line 7403
Drive: PHILIPS DVD+-RW DVD8631
Book Type request [gen]: DVD-ROM, write to EEPROM
Changing the Book Type was finished successfully, return code 0
2:34:53 PM #32 CDR -1176 File WriterStatus.cpp, Line 162
Session fixation error
E: PHILIPS DVD+-RW DVD8631
2:34:53 PM #33 TRANSFER -24 File WriterStatus.cpp, Line 162
Could not perform end of Disc-at-once
2:34:53 PM #34 Phase 38 File APIProgress.cpp, Line 285
Burn process failed at 4x (5,540 KB/s)
2:34:53 PM #35 Text 0 File AudioCompilationImpl.cpp, Line 863
DRM: DRM burn session terminated.
2:34:53 PM #36 Text 0 File AudioCompilationImpl.cpp, Line 892
DRM: Closing entire DRM handling. Bye.
2:34:53 PM #37 Text 0 File SCSIPTICommands.cpp, Line 261
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
2:34:57 PM #38 Text 0 File Cdrdrv.cpp, Line 11185
DriveLocker: UnLockVolume completed
2:34:57 PM #39 Text 0 File SCSIPTICommands.cpp, Line 424
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 1:07:32 PM
File 'Drivers\PXHELP20.SYS': Ver=2.03.16a, size=20576 bytes, created 8/2/2004 1:03:00 AM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
|
Advertisement
|
 |
|
|
Senior Member
|
23. January 2008 @ 19:19 |
Link to this message
|
Originally posted by venaltwin:
...
Nero API version: 7.10.1.2
Using interface version: 6.3.1.4
...
Physical memory : 510MB (522332kB)
Free physical memory: 194MB (198692kB)
Memory in use : 61 %
You may still have Nero 6 hanging around.
Try running the claen tools for 6 and 7.
Be careful what you are running while burning.
You do not have a lot to spare.
How oled is the burner?
|
AfterDawn Addict
1 product review
|
23. January 2008 @ 20:00 |
Link to this message
|
Quote:
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x02
CDB Data: 0x2A
ERROR: POWER CALIBRATION AREA IS FULL
"that error signals that the unit cannot track a particular zone used for calibrating the laser power, so it refuses to burn to avoid damages and injuries. Tipical of low-quality or damaged discs, or dirty lens."
What discs are you using? Could not find them in your log.
EDIT: I did find them in your post.
Back to 56delray's question, if your drive is old, even with up to date firmware, might still not be compatible with current media.
Also see related to your error:
http://smartcomputing.com/techsupport/de...=&ErrorID=30445
 Piss me off, and I Will ignore You!This message has been edited since posting. Last time this message was edited on 23. January 2008 @ 20:12
|
|
venaltwin
Newbie
|
24. January 2008 @ 11:36 |
Link to this message
|
56delary
The DVD burner is what came with the Dell Dimension 8400 computer when I bought it 3 years ago. I have never upgraded the firmware until now. I have heard bad things about this particular model.
Also, I will try to use the Nero clean tool again to see what happens.
|
|
venaltwin
Newbie
|
24. January 2008 @ 11:40 |
Link to this message
|
cyprusrom
I am using Sony DVD+R Ver. 1.3/1x-16x discs. Also, the DVD burner came with the computer when I bought it 3 years ago.
|
|
Advertisement
|
|
|
Senior Member
|
26. January 2008 @ 13:37 |
Link to this message
|
Sorry I about the last post.
I was referring to the low amount of RAM you have.
Quote:
12:19:50 AM #9 Text 0 File DlgWaitCD.cpp, Line 2578
Recorder: SONY DVD RW DW-U18A, Media type: DVD-R
Disc Manufacturer: TYG02 -
Disc Application Code: 64, Disc Physical Code: 193
Most of the time you should something like the above in your log.
The fact that your log does not have manufacturer code may point to the media being a problem.
Download this tool to see what media you have.
The code should be one of these.
|
|
