|
|
|
No Seek Complete Errors at the beginning of burning.
|
|
|
jjoey312
Newbie
|
10. February 2008 @ 13:12 |
Link to this message
|
I have just started having these errors about 3-4 weeks ago. I don't really no of any significant changes I have made to my computer that would cause these problems. Most of the time I have failed burns ( I don't know if it is normal and I don't remember from the past but it seems as if the buffer underrun monitor will not start reading for a 20-30 seconds and then when it does it's about 92% maybe this is normal I don't remember from the past). If the disc ever gets past say about 10 - 15% they usually burn Okay.
I have tried to do research so as not to post questions that have already been answered, but I wanted to ask a few different questions. I understand from most reading 4 things could be wrong.
1. Defective DVD writer (One thing I have not tried)
2. Media (I've tried two different kinds)
3. Ide cable (I've not tried this, I currently use the round cable kind - - I read somewhere where someone had a problem with these, I ve had the same cable for at least 3 years and it has been fine.)
4. Memory usage - In the past I could surf the internet multitask whatever and never had any problems. Since then my best chances of a good burn is to restart computer and maybe the first burn will be good sometimes two. Afterwards they might mostly be bad burns.
IMPORTANT :: I also tried to burn a iso image here while back with dvd dycrpter and it was failed said NO SEEK COMPLETE.
IMPORTANT :: One thing that is strange at the bottom of each log file there is no listing for drivers I'm thinking there has to be something wrong with this.
I'm going to post two log files
FIRST ONE:: This burn was Okay
SECOND ONE:: Failed NO SEEK COMPLETE
I'm hoping I post these right, I've read to edit out serial #
Windows XP 5.1
IA32
WinAspi: -
NT-SPTI used
Nero Version: 8.1.1.0
Internal Version: 8, 1, 1, 0
Recorder: <PLEXTOR DVDR PX-708A> Version: 1.12 - HA 1 TA 1 - 8.1.1.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default
CD-ROM: <PLEXTOR DVDR PX-708A >Version: 1.12 - HA 1 TA 1 - 8.1.1.0
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD2000JB-00EVA0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : WDC WD2000JB-00EVA0 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : PLEXTOR DVDR PX-708A atapi Port 1 ID 0 DMA: On
CdRomPeripheral : LITE-ON LTR-52327S atapi Port 1 ID 1 DMA: On
CdRomPeripheral : ID2420Q RQZ051W atapi Port 2 ID 0 DMA: On
CdRomPeripheral : ID2420Q RQZ051W 1.0 axers0y7 Port 3 ID 0 DMA: Off
=== CDRom-Device-Map ===
ID2420Q RQZ051W N: CdRom0
PLEXTOR DVDR PX-708A E: CdRom1
LITE-ON LTR-52327S K: CdRom2
ID2420Q RQZ051W L: CdRom3
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (83886080) Byte
BUFE : 0
Physical memory : 1023MB (1048044kB)
Free physical memory: 557MB (571184kB)
Memory in use : 45 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
26.1.2008
UDF/ISO compilation
4:17:50 AM #1 Text 0 File SCSIPTICommands.cpp, Line 450
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
4:17:51 AM #2 Phase 112 File dlgbrnst.cpp, Line 1764
DVD-Video files reallocation started
4:17:51 AM #3 Phase 114 File dlgbrnst.cpp, Line 1764
DVD-Video files reallocation completed (no file modified)
4:17:51 AM #4 Text 0 File Isodoc.cpp, Line 6671
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Options : automatic
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : FALSE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
4:17:51 AM #5 Phase 111 File dlgbrnst.cpp, Line 1764
DVD-Video files sorted
4:17:51 AM #6 ISO9660GEN -11 File Geniso.cpp, Line 3347
First writeable address = 0 (0x00000000)
4:17:51 AM #7 ISO9660GEN -11 File Geniso.cpp, Line 3347
First writeable address = 0 (0x00000000)
4:17:51 AM #8 Text 0 File Burncd.cpp, Line 3530
Turn on Disc-At-Once, using DVD media
4:17:51 AM #9 Text 0 File FilesystemSettingsValidator.cpp, Line 142
FS Settings: using validator 'CUDFSettingsValidatorDVD'
ParamMode = 'automatic', changing UDF partition type from 'physical' to 'physical'
Changing UDF revision from '1.02' to '1.02'
4:17:51 AM #10 Text 0 File DlgWaitCD.cpp, Line 307
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1820175 (404:29.00, 3555MB)
4:17:51 AM #11 Text 0 File DlgWaitCD.cpp, Line 319
Write in overburning mode: NO (enabled: CD)
4:17:51 AM #12 Text 0 File DlgWaitCD.cpp, Line 2972
Recorder: PLEXTOR DVDR PX-708A, Media type: DVD-RW
Disc Manufacturer ID: <MCC 01> <RW11n9>
Disc Application Code: 64, Disc Physical Code: 214
4:17:51 AM #13 Text 0 File DlgWaitCD.cpp, Line 493
>>> Protocol of DlgWaitCD activities: <<<
=========================================
4:17:51 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 785
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1820176 (1820176) = #1820176/404:29.1
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1820176 blocks [E: PLEXTOR DVDR PX-708A]
--------------------------------------------------------------
4:17:51 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 986
Prepare [E: PLEXTOR DVDR PX-708A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3727720448, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 1820176 | 0 | 0x00
1820176 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
4:17:51 AM #16 Text 0 File SCSIPTICommands.cpp, Line 240
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME
4:17:51 AM #17 Text 0 File Burncd.cpp, Line 4316
Caching options: cache CDRom or Network-Yes, small files-No (<64KB)
4:17:51 AM #18 Phase 24 File dlgbrnst.cpp, Line 1764
Caching of files started
4:17:51 AM #19 Text 0 File Burncd.cpp, Line 4435
Cache writing successful.
4:17:51 AM #20 Phase 25 File dlgbrnst.cpp, Line 1764
Caching of files completed
4:17:51 AM #21 Phase 36 File dlgbrnst.cpp, Line 1764
Burn process started at 2x (2,770 KB/s)
4:17:51 AM #22 Text 0 File ThreadedTransferInterface.cpp, Line 2735
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
4:17:51 AM #23 Text 0 File DVDR.cpp, Line 3245
Recording mode: Sequential Recording Mode
4:17:51 AM #24 Text 0 File DVDR.cpp, Line 3401
Start write address at LBA 0
DVD high compatibility mode: Yes
4:17:51 AM #25 Text 0 File Cdrdrv.cpp, Line 10026
---- Disc Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-RW (3), Part Version: 1.1x (2)
Disc Size: 120 mm, Maximum Rate: 10,08 Mbps (2 h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
Outer Limit of Data Recordable Area: 0 h
Data in Burst Cutting Area (BCA) does not exist
Revision number of maximum recording speed: -
Revision number of minimum recording speed: -
Revision number table of recording speed: - - - - - - -
Class: 0, Extended part version: 0
Start PSN of the Extra Border Zone: 0 h
Start PSN of Physical format information blocks in Extra Border Zone: 0 h
Media Specific [16..783]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
4:17:51 AM #26 Text 0 File ThreadedTransfer.cpp, Line 268
Pipe memory size 83836800
4:40:20 AM #27 Text 0 File WriterStatus.cpp, Line 113
<E: PLEXTOR DVDR PX-708A> start writing Lead-Out at LBA 1820176 (1BC610h), length 0 blocks
4:40:20 AM #28 Phase 181 File dlgbrnst.cpp, Line 1764
Writing lead-out...
4:41:26 AM #29 Text 0 File DVDR.cpp, Line 3803
EndDAO: Last written address was 1820175 (1BC60Fh)Estimated time for 30mm Borders: 0min 00sec
4:41:26 AM #30 Phase 37 File dlgbrnst.cpp, Line 1764
Burn process completed successfully at 2x (2,770 KB/s)
4:41:26 AM #31 Text 0 File SCSIPTICommands.cpp, Line 287
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
4:41:30 AM #32 Text 0 File Cdrdrv.cpp, Line 11276
DriveLocker: UnLockVolume completed
4:41:30 AM #33 Text 0 File SCSIPTICommands.cpp, Line 450
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
THIS STARTS THE BURN FAILED LOG
Windows XP 5.1
IA32
WinAspi: -
NT-SPTI used
Nero Version: 8.1.1.0
Internal Version: 8, 1, 1, 0
Recorder: <PLEXTOR DVDR PX-708A> Version: 1.12 - HA 1 TA 1 - 8.1.1.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default
CD-ROM: <PLEXTOR DVDR PX-708A >Version: 1.12 - HA 1 TA 1 - 8.1.1.0
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD2000JB-00EVA0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : WDC WD2000JB-00EVA0 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : PLEXTOR DVDR PX-708A atapi Port 1 ID 0 DMA: On
CdRomPeripheral : LITE-ON LTR-52327S atapi Port 1 ID 1 DMA: On
CdRomPeripheral : ID2420Q RQZ051W atapi Port 2 ID 0 DMA: On
CdRomPeripheral : ID2420Q RQZ051W 1.0 as0q2pwg Port 3 ID 0 DMA: Off
=== CDRom-Device-Map ===
ID2420Q RQZ051W N: CdRom0
PLEXTOR DVDR PX-708A E: CdRom1
LITE-ON LTR-52327S K: CdRom2
ID2420Q RQZ051W L: CdRom3
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1023MB (1048044kB)
Free physical memory: 470MB (481728kB)
Memory in use : 54 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
24.1.2008
UDF/ISO compilation
10:58:12 AM #1 Text 0 File SCSIPTICommands.cpp, Line 450
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
10:58:13 AM #2 Phase 112 File dlgbrnst.cpp, Line 1764
DVD-Video files reallocation started
10:58:13 AM #3 DVDREALLOC -22 File DVDVideoCompilation.cpp, Line 1328
File 'VIDEO_TS.VOB' is not referenced and should not be present
10:58:13 AM #4 Phase 115 File dlgbrnst.cpp, Line 1764
DVD-Video files reallocation failed
10:58:17 AM #5 Phase 132 File dlgbrnst.cpp, Line 1764
DVD-Video files compliance ignored
10:58:17 AM #6 Text 0 File Isodoc.cpp, Line 6671
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Options : automatic
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : FALSE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
10:58:17 AM #7 Phase 111 File dlgbrnst.cpp, Line 1764
DVD-Video files sorted
10:58:18 AM #8 ISO9660GEN -11 File Geniso.cpp, Line 3347
First writeable address = 0 (0x00000000)
10:58:18 AM #9 ISO9660GEN -11 File Geniso.cpp, Line 3347
First writeable address = 0 (0x00000000)
10:58:18 AM #10 Text 0 File Burncd.cpp, Line 3530
Turn on Disc-At-Once, using DVD media
10:58:18 AM #11 Text 0 File FilesystemSettingsValidator.cpp, Line 142
FS Settings: using validator 'CUDFSettingsValidatorDVD'
ParamMode = 'automatic', changing UDF partition type from 'physical' to 'physical'
Changing UDF revision from '1.02' to '1.02'
10:58:18 AM #12 Text 0 File DlgWaitCD.cpp, Line 307
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2061295 (458:03.70, 4025MB)
10:58:18 AM #13 Text 0 File DlgWaitCD.cpp, Line 319
Write in overburning mode: NO (enabled: CD)
10:58:18 AM #14 Text 0 File DlgWaitCD.cpp, Line 2972
Recorder: PLEXTOR DVDR PX-708A, Media type: DVD-R
Disc Manufacturer ID: <Prodis> <cF02>
Disc Application Code: 64, Disc Physical Code: 193
10:58:18 AM #15 Text 0 File DlgWaitCD.cpp, Line 493
>>> Protocol of DlgWaitCD activities: <<<
=========================================
10:58:18 AM #16 Text 0 File ThreadedTransferInterface.cpp, Line 785
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2061296 (2061296) = #2061296/458:3.71
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2061296 blocks [E: PLEXTOR DVDR PX-708A]
--------------------------------------------------------------
10:58:18 AM #17 Text 0 File ThreadedTransferInterface.cpp, Line 986
Prepare [E: PLEXTOR DVDR PX-708A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4221534208, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 2061296 | 0 | 0x00
2061296 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
10:58:18 AM #18 Text 0 File SCSIPTICommands.cpp, Line 240
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME
10:58:18 AM #19 Text 0 File Burncd.cpp, Line 4316
Caching options: cache CDRom or Network-Yes, small files-No (<64KB)
10:58:18 AM #20 Phase 24 File dlgbrnst.cpp, Line 1764
Caching of files started
10:58:18 AM #21 Text 0 File Burncd.cpp, Line 4435
Cache writing successful.
10:58:18 AM #22 Phase 25 File dlgbrnst.cpp, Line 1764
Caching of files completed
10:58:21 AM #23 Phase 36 File dlgbrnst.cpp, Line 1764
Burn process started at 1x (1,385 KB/s)
10:58:21 AM #24 Text 0 File ThreadedTransferInterface.cpp, Line 2735
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
10:58:21 AM #25 Text 0 File DVDR.cpp, Line 3245
Recording mode: Sequential Recording Mode
10:58:21 AM #26 Text 0 File DVDR.cpp, Line 3401
Start write address at LBA 0
DVD high compatibility mode: Yes
10:58:21 AM #27 Text 0 File Cdrdrv.cpp, Line 10026
---- Disc Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: 10,08 Mbps (2 h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
Outer Limit of Data Recordable Area: 0 h
Data in Burst Cutting Area (BCA) does not exist
Revision number of maximum recording speed: -
Revision number of minimum recording speed: -
Revision number table of recording speed: - - - - - - -
Class: 0, Extended part version: 0
Start PSN of the Extra Border Zone: 0 h
Start PSN of Physical format information blocks in Extra Border Zone: 0 h
Media Specific [16..783]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
10:58:21 AM #28 Text 0 File ThreadedTransfer.cpp, Line 268
Pipe memory size 83836800
11:01:23 AM #29 SPTI -1093 File SCSIPassThrough.cpp, Line 181
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1093)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x02
Sense Qual: 0x00
CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
Sense Area: 0xF0 00 03 FF FF FE 00 0A 00 00 00 00 02
Buffer x09f00040: Len x10000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
11:01:23 AM #30 CDR -1093 File Writer.cpp, Line 306
No seek complete
E: PLEXTOR DVDR PX-708A
11:01:23 AM #31 Text 0 File DVDR.cpp, Line 3803
EndDAO: Last written address was -1 (FFFFFFFFh)
11:01:23 AM #32 Phase 38 File dlgbrnst.cpp, Line 1764
Burn process failed at 1x (1,385 KB/s)
11:01:23 AM #33 Text 0 File SCSIPTICommands.cpp, Line 287
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
11:01:26 AM #34 Text 0 File Cdrdrv.cpp, Line 11276
DriveLocker: UnLockVolume completed
11:01:26 AM #35 Text 0 File SCSIPTICommands.cpp, Line 450
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Any help appreciated.
|
|
Advertisement
|
|
|
|
AfterDawn Addict
|
10. February 2008 @ 17:35 |
Link to this message
|
In the first burn you were using good quality discs, looks like Verbatim, in the failed log
Quote:
Disc Manufacturer ID: <Prodis> <cF02>
you are using POOOR quality discs and burning way too slow at 1X....stick with the GOOD quality discs and ditch the prodiscs....burn at 4X
Here's something on the error ..NO SEEK COMPLETE
Quote:
Solution:
90% of the time this type of error message is caused by poor media, poor power to the recorder, or an optical head needing cleaning, or a drive needing to be serviced.
But it's only 90% of the time. On a rare occasion I've seen this caused by driver conflicts. Either from other software, or drivers for the IDE Controller.
Old firmware on the recorder - Go to the recorder MFG's website to obtain the latest firmware for your recorder. (You may be able to obtain it from this link as well: http://forum.rpc1.org/dl_all.php)
Poor media - Try more than one brand of media. For example: TDK, Verbatim, Imation, Yamaha, HP, etc.
Poor IDE cable or incorrect cable - For higher end recorders these days if you use the 40pin cable you can have all sorts of unusual symptoms. It would be best to use an ATA-133 80 wire cable.
Driver conflicts - If you have or had another CD recording software installed on your system, its drivers could be conflicting with our software. This is rare for this symptom, but it does occur. Uninstall any other recording software and make sure all its drivers have been removed with it. Then reinstall Nero and make sure to use the latest version we have posted on our website.
Defective recorder - The optical head on your recorder may need cleaning or servicing. Or it's possible the circuit board on your recorder has an open coil or blown diode or resistor. Any of these could cause the error. Only solution would be to send the drive in for service to the recorder manufacturer.
Last edited by cynthia : 4 Feb 2005 at 10:17 AM.
This message has been edited since posting. Last time this message was edited on 10. February 2008 @ 17:40
|
|
jjoey312
Newbie
|
12. February 2008 @ 08:32 |
Link to this message
|
Thanks for the advice
I've tried different media and still get failed burns.
Isn't there something wrong about no drivers being listed at the bottom of the nero log sheets. I have run the program aspicheck or something like that and these are what is listed.
WINASPI32.DLL
WINASPI.DLL
ASPI32.SYS
WOWPOST.EXE
Not so long ago I burned disc and rarely had any problems even surfing internet, multitasking whatever did not matter.
Any more help would be apreciatted.
How often do the round IDE cables go bad.
|
AfterDawn Addict
|
12. February 2008 @ 11:31 |
Link to this message
|
Quote:
Not so long ago I burned disc and rarely had any problems even surfing internet, multitasking whatever did not matter.
well....... how clean is your machine? have you cleaned out the clutter of old temp files, do a registry clean, do a virus/spam scan, and other programs to keep you machine lean and running to it's best performance like when it came out of the box? this is important especially when you're running intense mass storage burning programs that eat up resources and time!
|
|
jjoey312
Newbie
|
13. February 2008 @ 18:07 |
Link to this message
|
|
How about nothing showing up under existing drivers, does this mean anything?
|
|
Advertisement
|
|
|
AfterDawn Addict
1 product review
|
13. February 2008 @ 18:18 |
Link to this message
|
Originally posted by jjoey312:
How about nothing showing up under existing drivers, does this mean anything?
It means you're okay, no drivers that might conflict with Nero.
 Piss me off, and I Will ignore You! |
|
