|
|
|
illegal disc error =/
|
|
|
Cyberboy8
Newbie
|
15. February 2008 @ 17:16 |
Link to this message
|
Well i really dont understand anything about this kind of stuff, all i know is i used to burn my animes onto dvds and now i get this error with same program(nero6) and same dvds i used before.
Any help is appreciated ^^;
Log:
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 10-09-1999 12:06:00
ahead WinASPI: File 'C:\Programas\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26-10-2004 18:35:34
Nero Version: 6.6.0.15
Internal Version: 6, 6, 0, 15e
Recorder: <_NEC DVD_RW ND-3500AG> Version: 2.16 - HA 1 TA 0 - 6.6.0.15
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <_NEC DVD_RW ND-3500AG>Version: 2.16 - HA 1 TA 0 - 6.6.0.15
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
CdRomPeripheral : _NEC DVD_RW ND-3500AG atapi Port 1 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST CD-RW GCE-8526B atapi Port 1 ID 1 DMA: On
DiskPeripheral : Maxtor 6Y120M0 YAR5 viamraid Port 2 ID 0 DMA: Off
=== CDRom-Device-Map ===
_NEC DVD_RW ND-3500AG D: CDRom0
HL-DT-ST CD-RW GCE-8526B E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 510MB (522988kB)
Free physical memory: 113MB (115840kB)
Memory in use : 77 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
15.2.2008
ISO compilation
21:11:39 #1 Text 0 File Isodoc.cpp, Line 6314
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
21:11:39 #2 Text 0 File Reader.cpp, Line 127
Reader running
21:11:39 #3 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
21:11:39 #4 Text 0 File Burncd.cpp, Line 3231
Turn on Disc-At-Once, using DVD media
21:11:39 #5 Text 0 File DlgWaitCD.cpp, Line 267
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2053919 (456:25.44, 4011MB)
21:11:39 #6 Text 0 File DlgWaitCD.cpp, Line 279
Write in overburning mode: NO (enabled: CD)
21:11:39 #7 Text 0 File DlgWaitCD.cpp, Line 2457
Recorder: _NEC DVD_RW ND-3500AG, Media type: DVD-R
Disc Manufacturer: DAXON0 - 16S
Disc Application Code: 64, Disc Physical Code: 193
21:11:39 #8 Text 0 File DlgWaitCD.cpp, Line 445
>>> Protocol of DlgWaitCD activities: <<<
=========================================
21:11:39 #9 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2053920 (2053920) = #2053920/456:25.45
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2053920 blocks [_NEC DVD_RW ND-3500AG]
--------------------------------------------------------------
21:11:39 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [_NEC DVD_RW ND-3500AG] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4206428160, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2053920 | lead-out | 1 | 0x41 | 0x00
21:11:39 #11 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
21:11:39 #12 Text 0 File Burncd.cpp, Line 4116
Cache writing successful.
21:11:39 #13 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
21:11:39 #14 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 2.4x (3.324 KB/s)
21:11:39 #15 Text 0 File ThreadedTransferInterface.cpp, Line 2643
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
21:11:39 #16 Text 0 File DVDR.cpp, Line 2340
Recording mode: Sequential Recording Mode
21:11:39 #17 Text 0 File Mmc.cpp, Line 21627
Set BUFE: Buffer underrun protection -> ON
21:11:39 #18 Text 0 File DVDR.cpp, Line 2494
Start write address at LBA 0
DVD high compatibility mode: Yes
21:11:39 #19 Text 0 File Cdrdrv.cpp, Line 8821
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
21:11:39 #20 SCSI -1046 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x53 0x00 0x00 0x00 0x00 0x00 0x1F 0x57 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x05
21:11:39 #21 CDR -1046 File ThreadedTransferInterface.cpp, Line 1763
Illegal disc
21:11:39 #22 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1763
Could not perform start of Disc-at-once
21:11:39 #23 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 2.4x (3.324 KB/s)
Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=9464 bytes, created 07-03-2007 22:51:00
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 10-09-1999 12:06:00
File 'Drivers\PXHELP20.SYS': Ver=3.00.56a, size=43528 bytes, created 07-03-2007 22:51:00 (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 21-09-2004 11:00:00 (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
This message has been edited since posting. Last time this message was edited on 16. February 2008 @ 19:11
|
|
laddyboy
AfterDawn Addict
|
16. February 2008 @ 10:34 |
Link to this message
|
Quote:
CD-ROM: <_NEC DVD_RW ND-3500AG>Version: 2.16
Newer firmware for your burner at the links below:
http://liggydee.cdfreaks.com/page/en/NEC-ND-3500A/
http://forum.rpc1.org/dl_firmware.php?download_id=1904
Quote:
Disc Manufacturer: DAXON0 - 16S
Pretty low quality media. Verbatim is the most easy-to-come-by good quality media imo.
Quote:
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=9464 bytes, created 07-03-2007 22:51:00
The CDRALW2K driver is a Roxio driver that can sometimes interfere with Nero's ability to burn. Use the Roxio Zap tool to remove it unless you also use Roxio software.
http://tools.roxio.com/support/tools/roxizap.exe
You might also try using Nero to create an image file instead of burning directly to disk. Try using ImgBurn (free) to burn the created image to disk.
http://www.imgburn.com
I'd also edit your original post to remove your Nero serial number in its entirety. Click the paper/pencil icon in the uper right of your post to enter edit mode.
|
AfterDawn Addict
|
16. February 2008 @ 11:35 |
Link to this message
|
I agree with everything that Laddyboy mentioned.... just adding a good web page to download the latest firmware for your drive:
http://www.cdrinfo.com/Sections/Firmware...spx?DriveId=998
version 2.1b is the latest version for your drive.
also: Firmware is programming that is inserted into a programmable memory area of your drive, thus becoming a permanent part of a drive. This 'software' is called firmware and can be updated with a firmware flasher. A firmware upgrade can add new functionality to your drive. Also bug fixes and improvements are done by firmware upgrades. It also adds more media codes and write strategies to the drive to improve burning capabilities and disk recognition.
since you have very OLD firmware your drive will find it hard to write to the newer media found today! Without doing a firmware update your chances of burning successfully is limited. Do the firmware update.
ALSO:
more RAM would do wonders for Nero to work! Cut down on multi tasking, internet, and even shut down anti virus while working with Nero!
Update your Nero to version 6.6.1.15a
Here's how:
Before udating to 6.6.1.15a save the serial #, uninstall Nero, then use the cleaning tools : http://www.nero.com/eng/support-nero6-tools-utilities.html
then do a registry clean up - free registry cleaner, CClean: http://www.ccleaner.com/download/downloadpage.aspx?1) and defrag...... then reboot!
update to Nero 6.6.1.15a, install Package 1 and Package 2 only:
http://www.nero.com/eng/downloads-nero6-update.php
Install Package 1 & 2 ONLY!
reboot and you're good to go!
|
|
Advertisement
|
 |
|
|
Cyberboy8
Newbie
|
16. February 2008 @ 19:12 |
Link to this message
|
|
Thx alot guys, that fixed my problem ^^;
Now i can finely clean my pc xD
|
|
