|
|
|
Can't burn DL media w/ Nero,
|
|
|
TKM28
Newbie
|
5. April 2008 @ 13:07 |
Link to this message
|
I have wasted a few DL disks using the Nero 7 Essentials or even the version 8. All with the same log message attached below.
Could anyone help??
Thanks.
KM
PC
4C85-1000-0805-6EC1-4059-E56K-****
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=169792 bytes, created 2/22/2007 9:40:34 AM
NT-SPTI used
Nero Version: 7.5.14.0
Internal Version: 7, 5, 14, 0
(Nero Express)
Recorder: <SONY DVD RW AW-G170A> Version: 1.73 - HA 1 TA 1 - 7.5.14.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <SONY DVD RW AW-G170A >Version: 1.73 - HA 1 TA 1 - 7.5.14.0
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : MAXTOR 6L020J1 atapi Port 0 ID 0 DMA: On
DiskPeripheral : WDC WD1200JB-75CRA0 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : LITE-ON LTR-48125S atapi Port 1 ID 0 DMA: On
CdRomPeripheral : SONY DVD RW AW-G170A atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
LITE-ON LTR-48125S D: CDRom0
SONY DVD RW AW-G170A E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 990MB (1014188kB)
Free physical memory: 672MB (688536kB)
Memory in use : 32 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
5.4.2008
===== Disc-Copy over image - 1st step : Copy to image ...
10:25:52 AM #1 Text 0 File SCSIPTICommands.cpp, Line 411
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
10:25:53 AM #2 Text 0 File SCSIPTICommands.cpp, Line 209
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
10:25:53 AM #3 Text 0 File DVDCopy.cpp, Line 320
DVD Track-Information from source disc:
Media Type: DVD-ROM
Last LBA on layer 0 = 2019887 / 0x1ED22F / 3945MB
S01 T01 Con 0x14 Start 0 Len 3775616 NWA -1 (gap 0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0)
10:25:54 AM #4 Text 0 File DVDCopy.cpp, Line 435
Max -1 tracks of 1 allowed to copy
1: 0 - 3775616 = 3775616, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)
10:25:54 AM #5 Text 0 File Burncd.cpp, Line 3490
Turn on Disc-At-Once, using DVD media
10:25:54 AM #6 Text 0 File DlgWaitCD.cpp, Line 307
Last possible write address on media: 4718591 (1048:34.41, 9215MB)
Last address to be written: 3775615 (839:01.40, 7374MB)
10:25:54 AM #7 Text 0 File DlgWaitCD.cpp, Line 319
Write in overburning mode: NO (enabled: CD)
10:25:54 AM #8 Text 0 File DlgWaitCD.cpp, Line 493
>>> Protocol of DlgWaitCD activities: <<<
=========================================
10:25:55 AM #9 Text 0 File ThreadedTransferInterface.cpp, Line 792
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - Data (mode 1))
2 indices, index0 (150) not provided
original disc pos #0 + 3775616 (3775616) = #3775616/839:1.41
not relocatable, disc pos for caching/writing not required/not required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 3775616 blocks [Image Recorder]
--------------------------------------------------------------
10:25:55 AM #10 Text 0 File ThreadedTransferInterface.cpp, Line 995
Prepare [Image Recorder] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 7732461568, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 3775616 | 3775616 | 0x00
3775616 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
10:25:55 AM #11 Text 0 File Burncd.cpp, Line 4263
Caching options: cache CDRom or Network-No, small files-No (<64KB)
10:25:55 AM #12 Phase 120 File dlgbrnst.cpp, Line 1760
Creating the image for burning
10:25:55 AM #13 Text 0 File ThreadedTransferInterface.cpp, Line 2712
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
10:25:55 AM #14 Text 0 File ThreadedTransfer.cpp, Line 269
Pipe memory size 590400
10:36:42 AM #15 Text 0 File WriterStatus.cpp, Line 113
<Image Recorder> start writing Lead-Out at LBA 3775616 (399C80h), length 0 blocks
10:36:42 AM #16 Phase 121 File dlgbrnst.cpp, Line 1760
Creating Image completed successfully
10:36:44 AM #17 Text 0 File SCSIPTICommands.cpp, Line 254
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
10:36:49 AM #18 Text 0 File SCSIPTICommands.cpp, Line 411
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
10:36:49 AM #19 Text 0 File Cdrdrv.cpp, Line 11056
DriveLocker: UnLockVolume completed
===== Disc-Copy over image - 2nd step : Burn the image ...
10:36:51 AM #1 Text 0 File SCSIPTICommands.cpp, Line 411
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
10:36:53 AM #2 IMAGEGEN -10 File ImageGen.cpp, Line 366
Image was written as DAO.
DAOI:
MediaCatalogNumber = ''
TocType = 0x40
Finalized = 1
First/Last Track = 1 / 1
1: ISRC = ''
Blocksize = 2048
TrackMode = 'TRM_DATA_MODE1'
TrackConfig = 0x00
First/Last Index = 0 / 1
Index0FilePos = 0, Index1FilePos = 0, NextTrackFilePos = 7732461568
CUES:
LBRK: Last LBA on layer 0 = 2019887 / 0x1ED22F / 3945MB
MTYP: Mediumtype = DVD (old format) (0x1C)
Image file name: <H:\TempImage.nrg>
10:36:53 AM #3 Text 0 File Burncd.cpp, Line 3490
Turn on Disc-At-Once, using DVD media
10:43:23 AM #4 Text 0 File DlgWaitCD.cpp, Line 307
Last possible write address on media: 4173823 (927:30.73, 8151MB)
Last address to be written: 3775615 (839:01.40, 7374MB)
10:43:23 AM #5 Text 0 File DlgWaitCD.cpp, Line 319
Write in overburning mode: NO (enabled: CD)
10:43:23 AM #6 Text 0 File DlgWaitCD.cpp, Line 2940
Recorder: SONY DVD RW AW-G170A, Media type: DVD+R9 Double Layer
Disc Manufacturer ID: CMC MAG, Media Type ID: D01, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 0
10:43:23 AM #7 Text 0 File DlgWaitCD.cpp, Line 493
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: Unknown. Medium required by compilation: DVD R/RW, DVD R DL, DVD-RAM.)
10:43:23 AM #8 Text 0 File ThreadedTransferInterface.cpp, Line 792
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - DVD-ROM)
2 indices, index0 (150) not provided
original disc pos #0 + 3775616 (3775616) = #3775616/839:1.41
not relocatable, disc pos for caching/writing not required/not required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 3775616 blocks [E: SONY DVD RW AW-G170A]
--------------------------------------------------------------
10:43:29 AM #9 Text 0 File ThreadedTransferInterface.cpp, Line 995
Prepare [E: SONY DVD RW AW-G170A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 7732461568, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 3775616 | 0 | 0x00
3775616 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
10:43:29 AM #10 Text 0 File SCSIPTICommands.cpp, Line 209
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
10:43:29 AM #11 Text 0 File Burncd.cpp, Line 4263
Caching options: cache CDRom or Network-No, small files-No (<64KB)
10:43:29 AM #12 Phase 36 File dlgbrnst.cpp, Line 1760
Burn process started at 2.4x (3,324 KB/s)
10:43:30 AM #13 Text 0 File ThreadedTransferInterface.cpp, Line 2712
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
10:43:57 AM #14 SPTI -1066 File SCSIPassThrough.cpp, Line 179
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 00 00 00 00 00 00 21 08 04 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24 00 00 C0 00 07
Buffer x06fef940: Len x804
10:43:57 AM #15 Text 0 File DVDPlusDualLayer.cpp, Line 642
L0 Data Zone Capacity set to 2019904 (1ED240h, 3945MB) -> OK, confirmed setting
10:43:57 AM #16 CDR -1205 File DVDPlusDualLayer.cpp, Line 669
Burning Layer 1
10:43:57 AM #17 Text 0 File DVDPlusDualLayer.cpp, Line 679
Start writing layer 1 at address 0 (0h)
Recording mode: unknown Recording Mode
10:43:57 AM #18 Text 0 File Cdrdrv.cpp, Line 9824
---- Disc Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-ROM (0), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 2, Track Path: Opposite Track Path (OTP), Layer Type: recordable
Linear Density: 0,293 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Sector Number in Layer 0: 22D7FF h (LBN: 1FD7FF h, 4075 MB)
Data in Burst Cutting Area (BCA) does not exist
Media Specific [16..63]:
00 00 00 43 4D 43 20 4D - 41 47 00 44 30 31 00 40 ...CMC.MAG.D01.@
25 25 37 0B 02 3C 6A 02 - 3C 6A 1B 1C 0D 0C 0C 0C %%7..<j.<j......
02 01 01 10 00 1B 1C 0D - 0C 0C 0C 02 00 00 00 00 ................
10:43:57 AM #19 Text 0 File DVDR.cpp, Line 6653
Drive: SONY DVD RW AW-G170A
Book Type request [NEC]: DVD-ROM, write to RAM
select Book Type setting from RAM
Changing the Book Type was finished successfully, return code 0
10:43:57 AM #20 CDR -1207 File DVDR.cpp, Line 6346
Book Type automatically set to: DVD-ROM
10:43:57 AM #21 Text 0 File DVDPlusRW.cpp, Line 674
Start write address at LBA 0
DVD high compatibility mode: Yes
10:43:57 AM #22 Text 0 File ThreadedTransfer.cpp, Line 269
Pipe memory size 83836800
11:02:26 AM #23 SPTI -1135 File SCSIPassThrough.cpp, Line 179
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1135)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 00 00 1B E7 80 00 00 20 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 0C
Buffer x0af6e540: Len x10000
0x00 00 01 BA 44 7D B5 16 04 01 01 89 C3 F8 00 00
0x01 BD 07 EC 81 80 0A 21 1F 6D 4C FD FF FF FF FF
0xFF A0 06 00 7C 09 01 80 FF 97 FF 97 FF C3 FF C3
11:02:26 AM #24 CDR -1135 File Writer.cpp, Line 299
Write error
E: SONY DVD RW AW-G170A
11:02:26 AM #25 SPTI -1135 File SCSIPassThrough.cpp, Line 179
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1135)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x5B 01 01 00 00 01 00 00 00 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 0C
11:02:26 AM #26 SPTI -1176 File SCSIPassThrough.cpp, Line 179
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1176)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x72
Sense Qual: 0x03
CDB Data: 0x5B 01 05 00 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 72 03
11:02:26 AM #27 Text 0 File DVDPlusRW.cpp, Line 934
EndDAO: Last written address 1828736
11:02:26 AM #28 Text 0 File DVDR.cpp, Line 6653
Drive: SONY DVD RW AW-G170A
Book Type request [NEC]: DVD-ROM, write to RAM
select Book Type setting from RAM
Changing the Book Type was finished successfully, return code 0
11:02:26 AM #29 CDR -1176 File WriterStatus.cpp, Line 162
Session fixation error
E: SONY DVD RW AW-G170A
11:02:32 AM #30 TRANSFER -24 File WriterStatus.cpp, Line 162
Could not perform end of Disc-at-once
11:02:51 AM #31 Phase 38 File dlgbrnst.cpp, Line 1760
Burn process failed at 2.4x (3,324 KB/s)
11:02:53 AM #32 Text 0 File SCSIPTICommands.cpp, Line 254
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
11:02:56 AM #33 Text 0 File Cdrdrv.cpp, Line 11056
DriveLocker: UnLockVolume completed
11:02:56 AM #34 Text 0 File SCSIPTICommands.cpp, Line 411
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
|
Advertisement
|
|
|
|
AfterDawn Addict
|
5. April 2008 @ 17:33 |
Link to this message
|
Disc Manufacturer ID: CMC MAG, Media Type ID: D01
This is bad media.
The only reliable DL discs are Verbatim 2.4x made in Singapore.
Nero does not do a good job on creating the proper layer break. For dl media, try using ImgBurn to create your dl ISO. The guides on how to do this are located on site.
99% of all problems are between the computer and the chair.
|
AfterDawn Addict
1 product review
|
6. April 2008 @ 03:55 |
Link to this message
|
"The flimsier the product,the higher the price"
Ferengi 82nd rule of aqusition
 This message has been edited since posting. Last time this message was edited on 6. April 2008 @ 04:01
|
|
TKM28
Newbie
|
6. April 2008 @ 21:26 |
Link to this message
|
Thanks Dialysis 1.
However, just not happy with what Nero did, I took your advice to do it on IngBurn but with the same media, and this is the result;
What's your comment? Is it the media problem and not any others?
I 19:22:34 Operation Started!
I 19:22:34 Source Device: [1:1:0] SONY DVD RW AW-G170A 1.73 (E (ATA)
I 19:22:34 Source Media Type: DVD-ROM
I 19:22:34 Source Media Sectors: 3,882,000 (Track Path: OTP - L0: 2,005,216 - L1: 1,876,784)
I 19:22:34 Source Media Size: 7,950,336,000 bytes
I 19:22:34 Source Media Volume Identifier: GLS
I 19:22:34 Source Media Volume Set Identifier: 372B4BACAPPLEDSPGLS
I 19:22:34 Source Media Application Identifier: DVD Studio Pro:4.2.0, DSPInterface:431.19, DVDAuthoring:428.36, DVDBase:468.35(Encoder: 560), Oxygene:427
II 19:22:34 Source Media File System(s): ISO9660, UDF (1.02)
I 19:22:34 Read Speed (Data/Audio): MAX / 8x
I 19:22:34 Destination File: H:\GLS.ISO
I 19:22:34 Destination Free Space: 10,604,752,896 bytes (10,356,204 KB) (10,113 MB) (9 GB)
I 19:22:34 Destination File System: NTFS
I 19:22:34 File Splitting: Auto
I 19:23:13 Reading Session 1 of 1... (1 Track, LBA: 0 - 3881999)
I 19:23:13 Reading Track 1 of 1... (MODE1/2048, LBA: 0 - 3881999)
I 19:23:13 Reading Layer 0... (LBA: 0 - 2005215)
I 19:29:10 Reading Layer 1... (LBA: 2005216 - 3881999)
I 19:34:31 Exporting Graph Data...
I 19:34:31 Graph Data File: C:\Documents and Settings\PC\Application Data\ImgBurn\Graph Data Files\SONY_DVD_RW_AW-G170A_1.73_SUNDAY-APRIL-06-2008_7-22_PM_N-A.ibg
I 19:34:31 Export Successfully Completed!
I 19:34:31 Operation Successfully Completed! - Duration: 00:11:57
I 19:34:31 Average Read Rate: 10,828 KB/s (7.8x) - Maximum Read Rate: 16,252 KB/s (11.7x)
I 19:47:12 Operation Started!
I 19:47:12 Source File: H:\GLS.MDS
I 19:47:12 Source File Sectors: 3,882,000 (MODE1/2048)
I 19:47:12 Source File Size: 7,950,336,000 bytes
I 19:47:12 Source File Volume Identifier: GLS
I 19:47:12 Source File Volume Set Identifier: 372B4BACAPPLEDSPGLS DISC_A
I 19:47:12 Source File Application Identifier: DVD Studio Pro:4.2.0, DSPInterface:431.19, DVDAuthoring:428.36, DVDBase:468.35(Encoder: 560), Oxygene:427
I 19:47:12 Source File File System(s): ISO9660, UDF (1.02)
I 19:47:12 Destination Device: [1:1:0] SONY DVD RW AW-G170A 1.73 (E (ATA)
I 19:47:12 Destination Media Type: DVD+R DL (Disc ID: CMC MAG-D01-00) (Speeds: 2.4x)
I 19:47:12 Destination Media Sectors: 4,173,824
I 19:47:12 Write Mode: DVD
I 19:47:12 Write Type: DAO
I 19:47:12 Write Speed: 2.4x
I 19:47:12 Link Size: Auto
I 19:47:12 Test Mode: No
I 19:47:12 OPC: No
I 19:47:12 BURN-Proof: Enabled
I 19:47:13 Optimal L0 Data Zone Capacity: 2,005,216
I 19:47:13 Optimal L0 Data Zone Method: Copied From Original Disc
I 19:47:40 Filling Buffer... (40 MB)
I 19:47:41 Writing LeadIn...
I 19:47:43 Writing Session 1 of 1... (1 Track, LBA: 0 - 3881999)
I 19:47:43 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3881999)
I 19:47:43 Writing Layer 0... (LBA: 0 - 2005215)
W 19:51:02 Failed to Write Sectors 292512 - 292543 - Reason: No Seek Complete
W 19:51:02 Retrying (1 of 20)...
W 19:51:02 Retry Failed - Reason: Write Error
W 19:51:02 Retrying (2 of 20)...
W 19:51:02 Retry Failed - Reason: Write Error
W 19:51:02 Retrying (3 of 20)...
W 19:51:02 Retry Failed - Reason: Write Error
W 19:51:02 Retrying (4 of 20)...
W 19:51:02 Retry Failed - Reason: Write Error
W 19:51:02 Retrying (5 of 20)...
W 19:51:02 Retry Failed - Reason: Write Error
W 19:51:02 Retrying (6 of 20)...
W 19:51:02 Retry Failed - Reason: Write Error
W 19:51:02 Retrying (7 of 20)...
W 19:51:02 Retry Failed - Reason: Write Error
W 19:51:02 Retrying (8 of 20)...
W 19:51:02 Retry Failed - Reason: Write Error
W 19:51:02 Retrying (9 of 20)...
W 19:51:02 Retry Failed - Reason: Write Error
W 19:51:02 Retrying (10 of 20)...
W 19:51:02 Retry Failed - Reason: Write Error
W 19:51:02 Retrying (11 of 20)...
W 19:51:02 Retry Failed - Reason: Write Error
W 19:51:02 Retrying (12 of 20)...
W 19:51:02 Retry Failed - Reason: Write Error
W 19:51:02 Retrying (13 of 20)...
W 19:51:02 Retry Failed - Reason: Write Error
W 19:51:02 Retrying (14 of 20)...
W 19:51:02 Retry Failed - Reason: Write Error
W 19:51:02 Retrying (15 of 20)...
W 19:51:02 Retry Failed - Reason: Write Error
W 19:51:02 Retrying (16 of 20)...
W 19:51:02 Retry Failed - Reason: Write Error
W 19:51:02 Retrying (17 of 20)...
W 19:51:02 Retry Failed - Reason: Write Error
W 19:51:02 Retrying (18 of 20)...
W 19:51:02 Retry Failed - Reason: Write Error
W 19:51:02 Retrying (19 of 20)...
W 19:51:02 Retry Failed - Reason: Write Error
W 19:51:02 Retrying (20 of 20)...
W 19:51:02 Retry Failed - Reason: Write Error
W 19:55:05 Retrying (21)...
W 19:55:05 Retry Failed - Reason: Write Error
W 19:55:06 Retrying (22)...
W 19:55:06 Retry Failed - Reason: Write Error
W 19:55:07 Retrying (23)...
W 19:55:07 Retry Failed - Reason: Write Error
W 19:55:08 Retrying (24)...
W 19:55:08 Retry Failed - Reason: Write Error
W 19:55:09 Retrying (25)...
W 19:55:09 Retry Failed - Reason: Write Error
W 19:55:10 Retrying (26)...
W 19:55:10 Retry Failed - Reason: Write Error
W 19:55:11 Retrying (27)...
W 19:55:11 Retry Failed - Reason: Write Error
W 19:55:12 Retrying (28)...
W 19:55:12 Retry Failed - Reason: Write Error
W 19:55:12 Retrying (29)...
W 19:55:12 Retry Failed - Reason: Write Error
W 19:55:13 Retrying (30)...
W 19:55:13 Retry Failed - Reason: Write Error
W 19:55:14 Retrying (31)...
W 19:55:14 Retry Failed - Reason: Write Error
W 19:55:14 Retrying (32)...
W 19:55:14 Retry Failed - Reason: Write Error
W 19:55:15 Retrying (33)...
W 19:55:15 Retry Failed - Reason: Write Error
W 19:55:15 Retrying (34)...
W 19:55:15 Retry Failed - Reason: Write Error
W 19:55:16 Retrying (35)...
W 19:55:16 Retry Failed - Reason: Write Error
W 19:55:24 Retrying (36)...
W 19:55:24 Retry Failed - Reason: Write Error
W 19:55:26 Retrying (37)...
W 19:55:26 Retry Failed - Reason: Write Error
W 19:55:39 Retrying (38)...
W 19:55:39 Retry Failed - Reason: Write Error
E 19:55:45 Failed to Write Sectors 292512 - 292543 - Reason: No Seek Complete
I 19:55:46 Synchronising Cache...
I 19:56:26 Closing Track...
W 19:56:26 Close Track Failed! - Reason: Write Error
W 19:56:26 Retrying (1 of 3)...
W 19:56:26 Retry Failed - Reason: Write Error
W 19:56:26 Retrying (2 of 3)...
W 19:56:26 Retry Failed - Reason: Write Error
W 19:56:26 Retrying (3 of 3)...
W 19:56:26 Retry Failed - Reason: Write Error
W 19:56:30 Retrying (4)...
W 19:56:30 Retry Failed - Reason: Write Error
E 19:56:31 Close Track Failed! - Reason: Write Error
I 19:56:31 Finalising Disc...
W 19:56:31 Finalise Disc Failed! - Reason: Session Fixation Error - Incomplete Track in Session
W 19:56:31 Retrying (1 of 3)...
W 19:56:31 Retry Failed - Reason: Session Fixation Error - Incomplete Track in Session
W 19:56:31 Retrying (2 of 3)...
W 19:56:31 Retry Failed - Reason: Session Fixation Error - Incomplete Track in Session
W 19:56:31 Retrying (3 of 3)...
W 19:56:31 Retry Failed - Reason: Session Fixation Error - Incomplete Track in Session
E 19:56:33 Finalise Disc Failed! - Reason: Session Fixation Error - Incomplete Track in Session
E 19:56:33 Failed to Write Image!
I 19:56:33 Exporting Graph Data...
I 19:56:33 Graph Data File: C:\Documents and Settings\PC\Application Data\ImgBurn\Graph Data Files\SONY_DVD_RW_AW-G170A_1.73_SUNDAY-APRIL-06-2008_7-47_PM_CMC_MAG-D01-00_2.4x.ibg
I 19:56:33 Export Successfully Completed!
E 19:56:33 Operation Failed! - Duration: 00:09:20
I 19:56:33 Average Write Rate: 1,213 KB/s (0.9x) - Maximum Write Rate: 3,465 KB/s (2.5x)- Show quoted text -[/color]
|
AfterDawn Addict
|
7. April 2008 @ 01:03 |
Link to this message
|
|
That media has to go. Only Verbatim made in Singapore.
99% of all problems are between the computer and the chair.
|
|
TKM28
Newbie
|
8. April 2008 @ 11:08 |
Link to this message
|
Thanks, but all I could see is Verbatim seems to be the Only media.
What if one like me, could not get verbatim? Is there alternative??
Is Ritek, Ricoh, Mitsubishi OK?
|
AfterDawn Addict
|
8. April 2008 @ 12:07 |
Link to this message
|
99% of all problems are between the computer and the chair.
|
|
Advertisement
|
|
|
AfterDawn Addict
3 product reviews
|
9. April 2008 @ 09:36 |
Link to this message
|
Poor media is the cause for a lot of burning errors, and playback troubles. For some it's hard to accept this as a valid reason. We see it a lot as avid posters trying to help other people.
Use the good stuff. Taiyo Yuden (if you shop online) Verbatim, or Sony.
|
|
