|
|
|
Samsung sh-203-n (Sata) DVD burner making coasters :(
|
|
|
cdavid108
Newbie
|
14. April 2008 @ 22:42 |
Link to this message
|
Ok, I've tried everything over the last three days! I've done a million google searches and read about this so much my eyes are bleeding! I can't get this thing to work and I can't figure it out.
I bought a Samsung sh-203-n (Sata) DVD burner. I've never used a Sata drive on my box, but it looked pretty standard, just located the right area of the motherboard and hooked it up. I'm running XP SP2 and the motherboard is a PCCHIPS T12 V1.0.
It is reading discs fine.......will play a dvd and music no problem. It will begin writing and then it will error out. Neither Nero nor DVD Decryptor will work.
I've updated my BIOS, still nuthin!
I know that I should just go get another burner that isn't Sata, but I think everyone knows where I am.......I MUST MAKE THIS F*CKING WORK!! Oh, by the way, the burner was a christmas present from my wife. Long story short; we had a baby (time sucker-upper) around the holidays and I didn't get around to installing it until this week. Now she's giving me that look like "ok douche-bag you can't make this thingy work plus you waited 4 months to try to install it, now we can't send it back!"
I am going to include a log from Nero from the last failed attempt. Can someone please help me read this??
Thanks!
Ok, I've updated my BIOS, still nuthin! Damn!
I know that I should just go get another burner that isn't Sata, but I think everyone knows where I am.......I MUST MAKE THIS F*CKING WORK!! Oh, by the way, the burner was a christmas present from my wife. Long story short; we had a baby (time sucker-upper) around the holidays and I didn't get around to installing it until this week. Now she's giving me that look like "ok douche-bag you can't make this thingy work plus you waited 4 months to try to install it, now we can't send it back!"
I am going to include a log from Nero from the last failed attempt. Anybody have any idea how to read this thing?
Thanks!
---------------------------------------------------------------------
Windows XP 5.1
IA32
WinAspi: -
NT-SPTI used
Nero Version: 7.9.6.4
Internal Version: 7, 9, 6, 4
(Nero Express)
Recorder: <TSSTcorp CDDVDW SH-S203N>Version: SB01 - HA 1 TA 1 - 7.9.6.4
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <SAMSUNG DVD-ROM SD-816B >Version: H003 - HA 1 TA 0 - 7.9.6.4
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1600JB-53EVA0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : WDC ROM MODEL--SABRE-- atapi Port 0 ID 1 DMA: Off
CdRomPeripheral : TSSTcorp CDDVDW SH-S203N atapi Port 1 ID 0 DMA: On
CdRomPeripheral : SAMSUNG DVD-ROM SD-816B atapi Port 3 ID 0 DMA: On
=== CDRom-Device-Map ===
SAMSUNG DVD-ROM SD-816B D: CdRom0
TSSTcorp CDDVDW SH-S203N E: CdRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1022MB (1047340kB)
Free physical memory: 278MB (285208kB)
Memory in use : 72 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
14.4.2008
CD-ROM (ISO)
5:18:15 PM #1 Text 0 File SCSIPTICommands.cpp, Line 424
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
5:18:15 PM #2 Text 0 File Isodoc.cpp, Line 6663
Iso document burn settings
------------------------------------------
Determine maximum speed : TRUE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
5:18:15 PM #3 Text 0 File Burncd.cpp, Line 3196
TSSTcorp CDDVDW SH-S203N
Super Link activated
5:18:15 PM #4 ISO9660GEN -11 File Geniso.cpp, Line 3343
First writeable address = 0 (0x00000000)
5:18:16 PM #5 Text 0 File Burncd.cpp, Line 3508
Turn on Track-At-Once, using CD-R/RW media
5:18:16 PM #6 Text 0 File DlgWaitCD.cpp, Line 307
Last possible write address on media: 359844 ( 79:59.69)
Last address to be written: 167863 ( 37:20.13)
5:18:16 PM #7 Text 0 File DlgWaitCD.cpp, Line 319
Write in overburning mode: NO (enabled: CD)
5:18:16 PM #8 Text 0 File DlgWaitCD.cpp, Line 2964
Recorder: TSSTcorp CDDVDW SH-S203N;
CDR code: 00 97 15 17; OSJ entry from: Ritek Co.
ATIP Data:
Special Info [hex] 1: 00 00 00, 2: 00 00 00 (LI 0:00.00), 3: 00 00 00 (LO 0:00.00)
Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)
5:18:16 PM #9 Text 0 File DlgWaitCD.cpp, Line 493
>>> Protocol of DlgWaitCD activities: <<<
=========================================
5:18:16 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 793
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 167864 (167864) = #167864/37:18.14
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 167862 blocks [E: TSSTcorp CDDVDW SH-S203N]
--------------------------------------------------------------
5:18:16 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 995
Prepare [E: TSSTcorp CDDVDW SH-S203N] for write in TAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 344092672, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
-150 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
-150 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 167864 | 0 | 0x00
167864 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
5:18:16 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1066
Removed 2 run-out blocks from end of track 1. Length: 167864 -> 167862.
5:18:16 PM #13 Text 0 File SCSIPTICommands.cpp, Line 215
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME
5:18:16 PM #14 Text 0 File Burncd.cpp, Line 4294
Caching options: cache CDRom or Network-Yes, small files-Yes (<64KB)
5:18:16 PM #15 Phase 24 File dlgbrnst.cpp, Line 1762
Caching of files started
5:18:16 PM #16 Text 0 File Burncd.cpp, Line 4413
Cache writing successful.
5:18:16 PM #17 Phase 25 File dlgbrnst.cpp, Line 1762
Caching of files completed
5:18:16 PM #18 Phase 28 File dlgbrnst.cpp, Line 1762
Speed measurement started
5:18:16 PM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2721
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
5:18:16 PM #20 Text 0 File ThreadedTransfer.cpp, Line 269
Pipe memory size 590400
5:18:28 PM #21 Phase 29 File dlgbrnst.cpp, Line 1711
Speed measurement completed: 195.1x (29,274 KB/s)
5:18:28 PM #22 Phase 36 File dlgbrnst.cpp, Line 1762
Burn process started at 24x (3,600 KB/s)
5:18:28 PM #23 Text 0 File ThreadedTransferInterface.cpp, Line 2721
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
5:18:28 PM #24 Text 0 File MMC.cpp, Line 22363
Set BUFE: Super Link -> ON
5:18:28 PM #25 Text 0 File ThreadedTransfer.cpp, Line 269
Pipe memory size 83836800
5:18:51 PM #26 SPTI -1502 File SCSIPassThrough.cpp, Line 179
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1502)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x08
Sense Qual: 0x03
CDB Data: 0x2A 00 00 00 02 40 00 00 20 00 00 00
Sense Area: 0x70 00 04 00 00 00 00 0A 00 00 00 00 08 03
Buffer x080204c0: Len x10000
0x28 94 34 A0 05 C9 59 7C B8 04 3C 1A 61 BC 51 32
0x84 81 F1 D7 A8 DF 31 56 FE 37 74 08 78 B1 A2 F4
0xDE 9A 2F 56 30 C9 B4 8B 54 BB D4 FB 11 C5 FB 7E
5:18:51 PM #27 CDR -1502 File Writer.cpp, Line 303
DMA-driver error, CRC error
E: TSSTcorp CDDVDW SH-S203N
5:18:53 PM #28 CDR -201 File WriterStatus.cpp, Line 195
Invalid write state
E: TSSTcorp CDDVDW SH-S203N
5:18:53 PM #29 TRANSFER -18 File WriterStatus.cpp, Line 195
Could not perform EndTrack
5:18:53 PM #30 Text 0 File MMC.cpp, Line 17131
<TSSTcorpCDDVDW SH-S203N > start Close Session
5:24:21 PM #31 Phase 38 File dlgbrnst.cpp, Line 1762
Burn process failed at 24x (3,600 KB/s)
5:24:22 PM #32 Text 0 File SCSIPTICommands.cpp, Line 261
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
5:24:26 PM #33 Text 0 File Cdrdrv.cpp, Line 11185
DriveLocker: UnLockVolume completed
5:24:26 PM #34 Text 0 File SCSIPTICommands.cpp, Line 424
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 1 (Security Option)
|
|
Advertisement
|
 |
|
|
|
cdavid108
Newbie
|
15. April 2008 @ 19:57 |
Link to this message
|
|
Any ideas??
|
|
tripplite
Suspended due to non-functional email address
|
16. April 2008 @ 09:50 |
Link to this message
|
what are you burning? have you tried a firmware update or reinstalling your drivers? change the source of the burn?
have you checked to make sure the SATA connection is in nice n snug?
what media brand/type are you using?
try using imgburn,
-tripplite
|
Senior Member
|
17. April 2008 @ 04:27 |
Link to this message
|
I?m sure I?ve got that burner cant check as at work at the mo, mine wouldn?t burn an image with out error then following words of wisdom on here updated the firmware and bobs your uncle
|
|
Advertisement
|
|
|
Senior Member
|
17. April 2008 @ 04:29 |
Link to this message
|
|
|
|
