|
Thebox PVR scrambled or Bad channels T1 PROBLEM ???
|
|
|
Dumbdood
Newbie
|
17. May 2008 @ 05:19 |
Link to this message
|
Hi,
Advice greatly apprecited with this problem on my Starview thebox PVR.
All but the freeview channels are coming up with
" Bad or Scrambled channel T1" message,
I have gone into hidden menu and the Auto update is on, but i tried swithing off then back on several times and still the same.
I have reset the box and re-scanned many times, same.
Have checked and 2x checked cable feed is in input 1.
Any PVR experts with any ideas please give me a clue, im stummped.
any thanks, very Dumbdood.
|
|
Advertisement
|
  |
|
|
AfterDawn Addict
|
17. May 2008 @ 10:24 |
Link to this message
|
Go to parental control in receiver menu
press ( i or info button) + (2007)
key and emu buttons should now be visible
switch key emu to on position
go to scrambled channel and wait for update .
|
|
Dumbdood
Newbie
|
19. May 2008 @ 09:10 |
Link to this message
|
Hi, thanks for advice,
Though i did already switch the "Auto update" to on severall times.
I dont think the PVRs have "EMU" in the menu like the starview 2 + 3s.
Can anybodty tell me if I cant see "set Default " in the same menu as the "Auto update", would this indicate an un flashed box perhaps ?? or wrong version ??
|
AfterDawn Addict
|
19. May 2008 @ 20:43 |
Link to this message
|
Yes there is the EMU option on the PVR
Make sure you have it set to ON position
|
|
Dumbdood
Newbie
|
27. May 2008 @ 10:31 |
Link to this message
|
Hi again,
Does any body else have any other ideas,
as ive already said i have set The Autoupdate option to ON,
which is the option in the Cas system menu, Not EMU as on the Starview 2s and supers.
Still saying bad or scrambled channels T1.
I have relaoded the f/ware to 15Oct version
I dont know what else t try now
|
AfterDawn Addict
|
27. May 2008 @ 11:49 |
Link to this message
|
|
Presume you have the tuners looped correctly ?
|
|
Dumbdood
Newbie
|
27. May 2008 @ 12:42 |
Link to this message
|
|
Yes feed going into input 1, i have dispensed with the lopp stub leed and use a splitter to provide direct feed to each tuner as this seems to improve the EPG via tuner 2.
|
AfterDawn Addict
|
27. May 2008 @ 13:16 |
Link to this message
|
|
That may be your problem though as you need your loop through cable plugged into cable tuner 1 output and then to cable tuner 2 input.
|
|
Dumbdood
Newbie
|
27. May 2008 @ 15:36 |
Link to this message
|
|
Hi, scouser
I see what you are saying but i think it makes no difference to the tuners ability to decrypt the coded signal if they are run in series via the loop cable or each is fed directly via a splitter, in fact the signal strength is notably improved through t2 this way.
I have run other SV PVrs this way without a problem, in fact this very box was working fine until i lent it out to a friend to try,
HHhmmm , i have an idea now what the problem might be... just going to give it a go..
|
|
dublin07
Suspended permanently
|
27. May 2008 @ 17:43 |
Link to this message
|
|
hi i think you have to do a factory reset i heard most of the frequencys changed
|
|
Dumbdood
Newbie
|
27. May 2008 @ 19:14 |
Link to this message
|
Yes , you are absolutely right Dublin 07.
Ive just done a factory reset then re-scanned and it worked fine,
i recall my friend saying that he had to do the same when he borrowed the box as he is in a different area.
I think that the box remembers the original frequency settings and keeps reverting back to that even if you change to another provider.
Any way it works so many thanks for the hint.
Thanks to all, Dumbdood.
|
AfterDawn Addict
|
27. May 2008 @ 19:15 |
Link to this message
|
Originally posted by Dumbdood:
Hi, scouser
I see what you are saying but i think it makes no difference to the tuners ability to decrypt the coded signal if they are run in series via the loop cable or each is fed directly via a splitter, in fact the signal strength is notably improved through t2 this way.
I have run other SV PVrs this way without a problem, in fact this very box was working fine until i lent it out to a friend to try,
HHhmmm , i have an idea now what the problem might be... just going to give it a go..
If you gave it to a friend was he on a different provider?
|
|
Dumbdood
Newbie
|
27. May 2008 @ 19:26 |
Link to this message
|
|
Yes i am on NThell and hes excw,
So theres obvoiusly something stored/set in memory from the first scan that needs to be removed with a factory reset before new settings will take.
|
|
Dumbdood
Newbie
|
27. May 2008 @ 19:29 |
Link to this message
|
|
Sorry hes on Tellypest not C+W
|
AfterDawn Addict
|
27. May 2008 @ 19:32 |
Link to this message
|
|
As you said a factory reset and a scan on N** should do it as his symbol rate and frequencies differ.
|
|
Dumbdood
Newbie
|
27. May 2008 @ 19:35 |
Link to this message
|
|
Yes, it seems obvious now but i was selecting NThell and rescanning, couldnt understand why it was clearing as it was finding all channels.
So if anybody else has this problem, you justneed to Factory reset 1st. Many thanks all.
|
|
patb1
Newbie
|
30. May 2008 @ 18:12 |
Link to this message
|
hi guys can you help i have just joined this site today but i have had the pvr box since jan 08 without any problems
I had jul 07 firmware and i updated it to oct 07 firmware when i did a full scan it did'nt pick up utv,bbc1,bbc2,sky1,sky2
I believe all these channels are on the same frequency and even if i do a manual scan the signal strenght is perfect but it come back with 0 channels found
I had all these channels before i put the new firmware on
can someone please help and has these channels got new frequency's i'm in dublin ireland
thanks
|
AfterDawn Addict
|
30. May 2008 @ 20:52 |
Link to this message
|
Have you tried reverting back to your original firmware?
|
|
patb1
Newbie
|
2. June 2008 @ 17:26 |
Link to this message
|
hey dude
god nothing is working for me regarding these missing channels , I am after trying everything seriously everything i'm a computer engineer so I know what i'm doing , i have flashed the memory twice one with the old firmware one with the new one , i have scanned and rescanned with direct cables from the wall
I even brought it up to my mates house and done a scan there and the same thing, it just wont pickup freq 347.500 which is utv bbc1 2 and all the others on that frequency
i cant understand this as i had them before i did an upgrade with the new firmware oct 2007 but i have even taken this off and put back july 07
have you any other ideas mate , is the factory reset the ultimate reset or can you totally wipe the memory any other way
anything at all dude would help , thanks
Patrick
|
AfterDawn Addict
|
2. June 2008 @ 20:04 |
Link to this message
|
|
Sounds like you are on N** Dublin, the TP is weak in some areas have you tried a booster? But also do a factory reset and rescan after the booster install as a new TP has been added and some channels changed to others.
This message has been edited since posting. Last time this message was edited on 2. June 2008 @ 20:06
|
|
patb1
Newbie
|
3. June 2008 @ 09:11 |
Link to this message
|
hey thanks for teh reply
Yes I am on N*L dublin , but as I said in my post I brought the box to my mates house who has all these channels and done a factory reset and re scan and still I cant get these chanels but he has them all on his box
Am I wasting my money buying a booster under these circumstances
Also when I do a manual scan on that frequency the level and quality bars at the bottom are at 85% each so does that not indicate that I dont need a booster
and I aslo had these channels where I live now
|
|
bells99
Newbie
|
3. June 2008 @ 11:27 |
Link to this message
|
|
same problem here in waterford my friend got the same box and has all the channels wondering if transfering software chanel data from his might solve this
|
|
patb1
Newbie
|
3. June 2008 @ 13:12 |
Link to this message
|
Hey bells
this is the most baffling problem ever , i have seen some technical probelms in my life but this is unsolvable
I have even gone out and bought a booster and still nothing cant get anything on frequency 347500 which is utv bbc1 and 2 and others
nobody seems to know the problem or how to solve it
any ideas would be welcome willing to try anything at this stage
|
|
bells99
Newbie
|
3. June 2008 @ 17:05 |
Link to this message
|
|
hi pat
going to try the software & data transfer tomorrow ill let you konw how i get on
|
|
Advertisement
|
|
|
|
bells99
Newbie
|
4. June 2008 @ 18:27 |
Link to this message
|
|
pat sent you a pm dont know the rules about posting links to other forums on here
|
