|
nokia dbox debug bootmanager
|
|
|
turner123
Suspended permanently
|
7. July 2008 @ 14:59 |
Link to this message
|
did nt want to put this in the normal nokia dbox thread as this is aimed at debugging your dbox only.
i have a problem with debugging a nokia dbox 2 bmox version 1.0
this is the boot log file can anyone shed some light on this?
***Adapter Desc: Marvell Yukon 88E8036 PCI-E Fast Ethernet Controller (via IpHlpApi #1)
***MAC address: 00:13:A9:C1:AC:63 Local IP: 169.254.57.46
***BootP server started... Port 67
***TFTP server started... Port 69
BootP> Request from 00:13:A9:C1:AC:63 - There is something wrong!
BootP> Der Request kommt von der Netzwerkkarte selbst (und nicht von der DBOX), wahrscheinlich
BootP> laufen eine Firewall oder irgendwelche anderen Server im selben Netz?
BootP> Answer sent!
BootP> Request from 00:13:A9:C1:AC:63 - There is something wrong!
BootP> Der Request kommt von der Netzwerkkarte selbst (und nicht von der DBOX), wahrscheinlich
BootP> laufen eine Firewall oder irgendwelche anderen Server im selben Netz?
BootP> Answer sent!
BootP> Request from 00:50:9C:1B:8D:79 (assuming that this is DBox).
BootP> Created dynamic ARP entry for DBoxIP 192.168.0.24 with MAC 00:50:9C:1B:8D:79
BootP> Answer sent!
BootP> Request from 00:13:A9:C1:AC:63 - There is something wrong!
BootP> Der Request kommt von der Netzwerkkarte selbst (und nicht von der DBOX), wahrscheinlich
BootP> laufen eine Firewall oder irgendwelche anderen Server im selben Netz?
BootP> Answer sent!
BootP> Created dynamic ARP entry for DBoxIP 192.168.0.24 with MAC 00:50:9C:1B:8D:79
BootP> Answer sent!
BootP> Request from 00:13:A9:C1:AC:63 - There is something wrong!
BootP> Der Request kommt von der Netzwerkkarte selbst (und nicht von der DBOX), wahrscheinlich
BootP> laufen eine Firewall oder irgendwelche anderen Server im selben Netz?
BootP> Answer sent!
im also thinking its the bootmanage ppcboot file maybe corrupt becasue when i use the flash reset at the rite time i get kein system were as i should get reset (ppcboot) is the boot file so why no system? (kein system)once flash reset is removed the box boots a per usual not in dbug
any help or advice on this would be great
i will also update it if and when i pass this hurdle
|
|
Advertisement
|
|
|
|
|
mgb17
Senior Member
|
8. July 2008 @ 01:41 |
Link to this message
|
|
169.254.57.46 thats the IP of your pc.
192.168.0.24 thats the IP you are giving the dbox.
Do you think the logic network is the same?
|
|
turner123
Suspended permanently
|
8. July 2008 @ 05:34 |
Link to this message
|
Originally posted by mgb17:
169.254.57.46 thats the IP of your pc.
192.168.0.24 thats the IP you are giving the dbox.
Do you think the logic network is the same?
i was upto 4 this morning translatin german forums and tutorials its something to do with mediasensing? iv insatlled the patchs not i get another boot log ill put it up thanks for the reply
|
|
turner123
Suspended permanently
|
8. July 2008 @ 05:40 |
Link to this message
|
this is the boot log from above
*** Adapter Desc: Marvell Yukon 88E8036 PCI-E nearly Ethernet CONTROLLER (via IpHlpApi #1) *** MAC address: 00:13: A9: C1: AC: 63 local IP: 169.254.57.46 ***
BOOTP server started? Haven 67 ***
TFTP server started? Haven 69 BootP>
Request from 00:13: A9: C1: AC: 63 - There is something wrong! BootP> The Request comes from the network map (and not of the DBOX), probably BootP> does a Firewall or any other servers run in the same net?
BootP> Answer sent! BootP> Request from 00:13: A9: C1: AC: 63 - There is something wrong! BootP> The Request comes from the network map (and not of the DBOX), probably BootP> does a Firewall or any other servers run in the same net?
BootP> Answer sent! BootP> Request from 00:50: 9C: 1B: 8D: 79 (assuming this is DBox that)
. BootP> Created dynamic ARP entry for DBoxIP 192.168.0.24 with MAC 00:50: 9C: 1B: 8D: 79 BootP> Answer sent! BootP> Request from 00:13: A9: C1: AC: 63 - There is something wrong! BootP> The Request comes from the network map (and not of the DBOX), probably BootP> does a Firewall or any other servers run in the same net?
BootP> Answer sent! BootP> Created dynamic ARP entry for DBoxIP 192.168.0.24 with MAC 00:50: 9C: 1B: 8D: 79 BootP> Answer sent! BootP> Request from 00:13: A9: C1: AC: 63 - There is something wrong! BootP> The Request comes from the network map (and not of the DBOX), probably BootP> does a Firewall or any other servers run in the same net?
BootP> Answer sent!
all fire wall is off antivirus completly off
|
|
mgb17
Senior Member
|
8. July 2008 @ 05:47 |
Link to this message
|
|
Give your network device at your pc a fixed IP.
For instance 192.168.0.1
|
|
turner123
Suspended permanently
|
8. July 2008 @ 05:51 |
Link to this message
|
Originally posted by mgb17:
Give your network device at your pc a fixed IP.
For instance 192.168.0.1
i have done that i set it to 192.168.5.3 dbox bootmanager 192.168.5.5
this is the boot log now
***Adapter Desc: Marvell Yukon 88E8036 PCI-E Fast Ethernet Controller (via IpHlpApi #0)
***MAC address: 00:13:A9:C1:AC:63 Local IP: 192.168.5.3
***BootP server started... Port 67
***TFTP server started... Port 69
BootP> Request from 00:50:9C:1B:8D:79 (assuming that this is DBox).
BootP> Created dynamic ARP entry for DBoxIP 192.168.5.5 with MAC 00:50:9C:1B:8D:79
BootP> Answer sent!
BootP> Created dynamic ARP entry for DBoxIP 192.168.5.5 with MAC 00:50:9C:1B:8D:79
BootP> Answer sent!
BootP> Created dynamic ARP entry for DBoxIP 192.168.5.5 with MAC 00:50:9C:1B:8D:79
BootP> Answer sent!
BootP> Created dynamic ARP entry for DBoxIP 192.168.5.5 with MAC 00:50:9C:1B:8D:79
BootP> Answer sent!
BootP> Created dynamic ARP entry for DBoxIP 192.168.5.5 with MAC 00:50:9C:1B:8D:79
BootP> Answer sent!
BootP> Created dynamic ARP entry for DBoxIP 192.168.5.5 with MAC 00:50:9C:1B:8D:79
BootP> Answer sent!
when i connect the flash reset im getting kein system, that means to me that its not connect to boot from the pc something is blocking me and i have tried everything?
|
|
turner123
Suspended permanently
|
8. July 2008 @ 06:24 |
Link to this message
|
|
im still getting this log
***Adapter Desc: Marvell Yukon 88E8036 PCI-E Fast Ethernet Controller (via IpHlpApi #0)
***MAC address: 00:13:A9:C1:AC:63 Local IP: 192.168.5.4
***BootP server started... Port 67
***TFTP server started... Port 69
BootP> Request from 00:50:9C:1B:8D:79 (assuming that this is DBox).
BootP> Created dynamic ARP entry for DBoxIP 192.168.5.5 with MAC 00:50:9C:1B:8D:79
BootP> Answer sent!
BootP> Created dynamic ARP entry for DBoxIP 192.168.5.5 with MAC 00:50:9C:1B:8D:79
BootP> Answer sent!
but i have managed to get the screen to say reset its all about the timing!! of connecting the flash reset
but that has concluded that something is blocking the dbox because when reset comes up should flash and then bootfrom the ppcboot file and stay on, but its not.
i am not giving up on this going to stay with it until i have debuged this box!!!! lol
|
|
mgb17
Senior Member
|
8. July 2008 @ 06:53 |
Link to this message
|
|
|
|
turner123
Suspended permanently
|
8. July 2008 @ 07:11 |
Link to this message
|
Originally posted by mgb17:
http://www.dietmar-h.net/mhc_debugn2xi.html
Only available in german.
Be sure your dbox is really a nokia 2xintel BMon1.0. That procedure will kill every other dbox.
hi thanks, i have that already, yea it is 100% nokia 2x intel bmon1.0
i have uninstalled norton turned all firewall off allowed bootmanager through firewall, im using a usb to serial rs232, but i have tried with a direct null rs232 on a desk top still the same issue, its says in the manuel start bootmanager set it up done all that (dbox off at all these points) but bootmanager wont connect and get an error message when hit start with the box off, when its on it connects well the bootlog above ill post the error next
|
|
mgb17
Senior Member
|
8. July 2008 @ 07:17 |
Link to this message
|
|
Is there any other network device installed at your PC.
If yes disable that thing.
|
|
turner123
Suspended permanently
|
8. July 2008 @ 07:28 |
Link to this message
|
Originally posted by mgb17:
Is there any other network device installed at your PC.
If yes disable that thing.
on my laptop i have wireless card disabled that completely by the switch and network connections also the wireless function interface.
this is the error
Es wurde keine (passende) Netwerkkarte (mit verfugbarer IP) gerfunden!
Unter Win2k bzw. WinXP kann dieses Problem auftauchen, wenn die DBOXII uber ein Cross-kabel mit dem Rechner
verbunden ist!
Schaut bitte ins ReadMe (ganz am Ende), dort ist das Problem beschrieden. Der Vorgang wird abgebrochen!
english version
There was no (right) Netwerkkarte (with available IP) gerfunden!
Under Win2k or WinXP this problem can arise when the DBOXII about a cross-cable with the computer
is!
Please look into the ReadMe (at the very end), there is the problem beschrieden. The process will be aborted!
obviously there is no ip at that point because the box is switched off, like it keeps saying it has to be, thanks for your help 2 heads are better than just the one
|
|
mgb17
Senior Member
|
8. July 2008 @ 08:39 |
Link to this message
|
|
At the left upper side of the bootmanager is a drop down menu to select a network card.
Do you see there anything?
|
|
turner123
Suspended permanently
|
8. July 2008 @ 11:31 |
Link to this message
|
Originally posted by mgb17:
At the left upper side of the bootmanager is a drop down menu to select a network card.
Do you see there anything?
yea i choose my marvel 1 (ethernet) port iv disabled windows defender user account control uninstalled norton firewall completely off, but still getting blocked ? i have thought about putting win98 on an external drive and booting from that would that be an option to explore?
|
|
mgb17
Senior Member
|
8. July 2008 @ 11:50 |
Link to this message
|
|
Are you using Vista?
If yes disable IPV6 in the network card settings
|
|
turner123
Suspended permanently
|
8. July 2008 @ 12:01 |
Link to this message
|
Originally posted by mgb17:
Are you using Vista?
If yes disable IPV6 in the network card settings
yea im using vista, i downloaded a patch for that last night obvious did nt work will go and do that now, have you debugged a box yourself?
|
|
mgb17
Senior Member
|
8. July 2008 @ 13:26 |
Link to this message
|
|
I debugged a couple of dboxes but i'm using a old notebook with win98.
|
|
turner123
Suspended permanently
|
8. July 2008 @ 13:37 |
Link to this message
|
Originally posted by mgb17:
I debugged a couple of dboxes but i'm using a old notebook with win98.
yea thats what im talking about its the os stopping something with all the added security they pack in and you dont even know about, do you think if i install win98 on a external drive boot from that use as my os would this work?
or might look around car booty for desktop tower old one install win98 on it, iv got the debug process down to a T but stuck at this hurdle, i can almost be certain it ll be something so simple lookin rite at me but iv missed it
|
|
mgb17
Senior Member
|
8. July 2008 @ 14:21 |
Link to this message
|
|
Did you set the network card to 10baseT halfduplex if available in the card settings?
|
|
turner123
Suspended permanently
|
8. July 2008 @ 14:24 |
Link to this message
|
Originally posted by mgb17:
Did you set the network card to 10baseT halfduplex if available in the card settings?
yea i did tried that also tried auto, as thats what it set at for ifa and works fine
|
|
turner123
Suspended permanently
|
10. July 2008 @ 20:04 |
Link to this message
|
|
hi iv built a pc today and using win 98, i keep getting this messege
tftp transfer for c/dbox/ppcboot.
tftp transfer finnished sent 414 bolcks ?
dbox is flashing restet
but cant type in the com terminal?
iv been on this now since monday, and determind to get this sussed
any help on this one will be great, thank you
|
|
mgb17
Senior Member
|
11. July 2008 @ 04:27 |
Link to this message
|
|
You have now to use the arrow up button and flash reset after seeing reset.
Its a timing problem. If you see the numbers at the lcd display you have 1 or 2 seconds for the flash reset.
|
|
turner123
Suspended permanently
|
11. July 2008 @ 04:36 |
Link to this message
|
hi thanks, please correct or confirm
everything in bootmanager corrrect as it should be
i start bootmanager,
then the box,
then once the bootmanager finds the box reset is flashing press standby hold up button i get the numbers eg 1234567 1234 then i hit the flash reset point?
thanks for your help
|
|
turner123
Suspended permanently
|
11. July 2008 @ 05:56 |
Link to this message
|
Originally posted by turner123:
hi thanks, please correct or confirm
everything in bootmanager corrrect as it should be
i start bootmanager,
then the box,
then once the bootmanager finds the box reset is flashing press standby hold up button i get the numbers eg 1234567 1234 then i hit the flash reset point?
thanks for your help
once this is all done (debug) i have read about extracting ucodes once debug has complete, if i dont tv will not be viewable etc? can you confirm this and how its done as it does nt mention how to do that in the tuts just big red writing at the bottom of the tutorials, im assuming it is very important i do this ?
|
|
mgb17
Senior Member
|
11. July 2008 @ 08:50 |
Link to this message
|
Forget the ucodes. Every UK modded image include all necessary things.
Your sequence is right.
The ppcboot get transfered to the dbox, the bootloader detects a non matching security checksum and is doing a reset.
You don't have to use the first reset for the button and flash reset.
You can use the fourth or fifth or any other after you are ready.
This message has been edited since posting. Last time this message was edited on 11. July 2008 @ 08:52
|
|
Advertisement
|
|
|
|
turner123
Suspended permanently
|
15. July 2008 @ 15:44 |
Link to this message
|
|
hi thanks for the time you took in helping me and the advice you gave, its all debugged now flashed and working
|
