|
|
|
Nero 6 burn fail at 12x a couple times
|
|
|
haloan
Newbie
|
5. September 2008 @ 18:20 |
Link to this message
|
Hi, Not sure if this is a Nero or a burner problem but since I am using Nero to burn I will post here and see what people think. I am using Nero Buring Rom V6.6 to burn an ISO data dvd using Verbatim DVD-R MCC 03RG20 on a Pioneer DVR-215DBK. It's a new drive I got from New Egg and just started burning a bunch of DVDs this past weekend and twice now I got an error "Burn process failed at 12x". It had firmware version 1.13 and I upgraded it to 1.18 but before I try again I wanted to know if anyone has any ideas as to why this might occur and if there are any clues from this log file extract below? Are there any settings I should change in Nero? I had burned at 12x instead of 8x for example from reading that modern burners work better now at higher speeds. Should I try 8x instead?
====== *** Nero-Burning Rom, History File *** ======
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/17/2002 9:20:56 AM
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero Version: 6.6.0.12
Internal Version: 6, 6, 0, 12c
Recorder: Version: 1.13 - HA 1 TA 0 - 6.6.0.12
Adapter driver: HA 1
Drive buffer : 2000kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: Version: SB03 - HA 0 TA 1 - 6.6.0.12
Adapter driver: HA 0
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD3000GLFS-01F8U0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : TSSTcorp CDDVDW SH-S203B atapi Port 0 ID 1 DMA: On
CdRomPeripheral : PIONEER DVD-RW DVR-215D atapi Port 1 ID 0 DMA: On
CdRomPeripheral : LITE-ON DVDRW LH-20A1S atapi Port 1 ID 1 DMA: On
DiskPeripheral : ST3500320AS atapi Port 2 ID 0 DMA: On
DiskPeripheral : ST3500630AS atapi Port 3 ID 0 DMA: On
=== CDRom-Device-Map ===
TSSTcorp CDDVDW SH-S203B D: CDRom0
PIONEER DVD-RW DVR-215D G: CDRom1
LITE-ON DVDRW LH-20A1S H: CDRom2
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 2046MB (2095532kB)
Free physical memory: 1178MB (1206560kB)
Memory in use : 42 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
2.9.2008
ISO compilation
9:39:37 PM #1 Text 0 File Isodoc.cpp, Line 6194
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 2 (Max. of 31 chars)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
9:39:37 PM #2 Text 0 File Reader.cpp, Line 127
Reader running
9:39:37 PM #3 Text 0 File Writer.cpp, Line 122
Writer PIONEER DVD-RW DVR-215D running
9:39:37 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)
9:39:37 PM #5 Text 0 File Burncd.cpp, Line 3153
Turn on Disc-At-Once, using DVD media
9:39:38 PM #6 Text 0 File DlgWaitCD.cpp, Line 260
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2013519 (447:26.69, 3932MB)
9:39:38 PM #7 Text 0 File DlgWaitCD.cpp, Line 272
Write in overburning mode: NO (enabled: CD)
9:39:38 PM #8 Text 0 File DlgWaitCD.cpp, Line 2339
Recorder: PIONEER DVD-RW DVR-215D, Media type: DVD-R
Disc Manufacturer: MCC 03 - RG20
Disc Application Code: 64, Disc Physical Code: 193
9:39:38 PM #9 Text 0 File DlgWaitCD.cpp, Line 438
>>> Protocol of DlgWaitCD activities: <<<
=========================================
9:39:38 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2013520 (2013520) = #2013520/447:26.70
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2013520 blocks [PIONEER DVD-RW DVR-215D]
--------------------------------------------------------------
9:39:38 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [PIONEER DVD-RW DVR-215D] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4123688960, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2013520 | lead-out | 1 | 0x41 | 0x00
9:39:38 PM #12 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
9:39:38 PM #13 Text 0 File Burncd.cpp, Line 4037
Cache writing successful.
9:39:38 PM #14 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
9:39:38 PM #15 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 12x (16,620 KB/s)
9:39:40 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
9:39:40 PM #17 Text 0 File DVDR.cpp, Line 2258
Recording mode: Sequential Recording Mode
9:39:41 PM #18 Text 0 File Mmc.cpp, Line 21356
Set BUFE: Buffer underrun protection -> ON
9:39:41 PM #19 Text 0 File DVDR.cpp, Line 2412
Start write address at LBA 0
DVD high compatibility mode: Yes
9:39:41 PM #20 Text 0 File Cdrdrv.cpp, Line 8438
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
9:45:35 PM #21 SCSI -1135 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x04170000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x1D 0x03 0xC0 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x20 0x01 0x42 0x0E
0x00 0x00 0x00 0x00 0x0C 0x00
9:45:35 PM #22 CDR -1135 File Writer.cpp, Line 311
Write error
9:45:35 PM #23 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
9:45:35 PM #24 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
9:45:35 PM #25 Text 0 File DVDR.cpp, Line 2649
EndDAO: Last written address was 1901503
9:45:35 PM #26 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 12x (16,620 KB/s)
Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=9464 bytes, created 2/2/2007 3:00:00 AM
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 7/17/2002 8:53:02 AM
File 'Drivers\PXHELP20.SYS': Ver=3.00.56a, size=43528 bytes, created 3/29/2007 3:00:00 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.5512 (xpsp.080413-2108), size=96512 bytes, created 4/14/2008 12:10:32 AM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
Of the same discs in the batch that have been successful that I used Nero CD-DVD Speed 4.7.7.16 to do Disc Quality tests using either the Samsung or Lite-On drive listed in the log above which all came out at 95%.
Thanks for any help and I have been reading on these forums on and off for years and think it's a great resource!
|
Senior Member
|
5. September 2008 @ 20:59 |
Link to this message
|
You could try using Imgburn, but these kinds of problems usually
turn out not to be the fault of Nero, but some issue with the drive/
firmware/media.
Have you tried some other media? Does it work?
|
AfterDawn Addict
|
6. September 2008 @ 08:50 |
Link to this message
|
Quote:
DiskPeripheral : ST3500320AS atapi Port 2 ID 0 DMA: On
DiskPeripheral : ST3500630AS atapi Port 3 ID 0 DMA: On
are these virtual drives? if so disable them! sometimes Nero doesn't like or can't burn properly with virtual drives enabled..... don't ask me why.... just was told that! so disable the virtual drives.
Quote:
Drivers\CDRALW2K.SYS
this file comes from a Roxio or Sonic program! when having problems with Nero burning to disk it is best to uninstall Roxio/Sonic as they may conflict with Nero. Some computers don't have a problem with these programs and Nero but others do! So if you're having trouble uninstall Roxio/Sonic! Then do a registry clean up and defrag and reboot, try again!
rule about burning speeds: burn at half the rated disk speed (if the disk is an 8x disk then burn at 4x). Until you know your new drive and what it's capabilities are with certain disks, burn at half the speed rating!
Also it is much cheaper to buy the very best disk that is most recognized and has a great track record for successful burns: Taiyo Yuden! Verbatim is next best (in my humble opinion).
also: your version of Nero 6 may have bugs
Update your Nero to version 6.6.1.15a - this is the best version of Nero 6 - Here's how:
Before udating to 6.6.1.15a save the serial #, uninstall Nero, then use the cleaning tools : http://www.nero.com/eng/support-nero6-tools-utilities.html
then do a registry clean up(free registry cleaner, CClean: http://www.ccleaner.com/download/downloadpage.aspx?1) and defrag...... then reboot!
update to Nero 6.6.1.15a, install Package 1 and Package 2 only:
http://www.nero.com/eng/downloads-nero6-update.php
reboot and you're good to go!
try these suggestions and see if it helps.
This message has been edited since posting. Last time this message was edited on 6. September 2008 @ 08:52
|
|
Advertisement
|
|
|
|
haloan
Newbie
|
7. September 2008 @ 17:43 |
Link to this message
|
|
Hi, those peropherals it sees are hard drives. Thanks for the tips on the driver and versions. I will check into that and see if that helps!
|
|
