|
|
|
PLEXTOR DVDR PX-716A focus error
|
|
|
lifedrips
Newbie
|
10. September 2008 @ 02:39 |
Link to this message
|
i purchased this burner on ebay and after installing i tried to burn a dvd with maxwell dvdrw and failed about7 times. i took the cds back and got sony dvdrw and still didnt get a good burn going.i notice the fireware was higher then the support website had so i updated it with the latest one listed. I tried a few more burns and no good. here is a nero log
note. i tried burning photes and files too and got same errors
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 7/22/2004 4:33:44 PM
Nero version: 6.3.1.25 (Nero Express)
Recorder: <PLEXTOR DVDR PX-716A> Version: 1.11 - HA 1 TA 1 - 6.3.1.25
Adapter driver: <atapi> HA 1
Drive buffer : 8192kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <PLEXTOR DVDR PX-716A >Version: 1.11 - HA 1 TA 1 - 6.3.1.25
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD400EB-11CPF0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : PLEXTOR DVDR PX-716A atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
PLEXTOR DVDR PX-716A E: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1048044kB)
Free physical memory: 614MB (629132kB)
Memory in use : 39 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
10.9.2008
ISO compilation
1:58:34 AM #1 Text 0 File Isodoc.cpp, Line 6083
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
1:58:34 AM #2 Text 0 File Reader.cpp, Line 126
Reader running
1:58:34 AM #3 Text 0 File Writer.cpp, Line 124
Writer PLEXTOR DVDR PX-716A running
1:58:34 AM #4 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)
1:58:34 AM #5 Text 0 File Burncd.cpp, Line 3152
Turn on Disc-at-once, using DVD media
1:59:04 AM #6 Text 0 File DlgWaitCD.cpp, Line 247
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 12719 ( 2:49.44, 24MB)
1:59:04 AM #7 Text 0 File DlgWaitCD.cpp, Line 259
Write in overburning mode: NO (enabled: CD DVD)
1:59:04 AM #8 Text 0 File DlgWaitCD.cpp, Line 2162
Recorder: PLEXTOR DVDR PX-716A, Media type: DVD-RW
Disc Manufacturer: RITEKW - 01
Disc Application Code: 64, Disc Physical Code: 214
1:59:04 AM #9 Text 0 File DlgWaitCD.cpp, Line 420
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert the disc to write to.
(Medium in drive: Unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD+R9 Double Layer.)
1:59:04 AM #10 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 12720 (12720) = #12720/2:49.45
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 12720 blocks [PLEXTOR DVDR PX-716A ]
--------------------------------------------------------------
1:59:04 AM #11 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [PLEXTOR DVDR PX-716A ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 26050560, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
12720 | lead-out | 1 | 0x00 | 0x41
1:59:04 AM #12 Phase 24 File dlgbrnst.cpp, Line 1855
Caching of files started
1:59:04 AM #13 Text 0 File Burncd.cpp, Line 4163
Cache writing successful.
1:59:04 AM #14 Phase 25 File dlgbrnst.cpp, Line 1855
Caching of files completed
1:59:04 AM #15 Phase 36 File dlgbrnst.cpp, Line 1855
Burn process started at 2x (2,770 KB/s)
1:59:04 AM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
1:59:04 AM #17 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 0:59,109 (59109ms) -> OK
1:59:04 AM #18 Text 0 File DVDMinusRW.cpp, Line 271
Perform 'Quick Format' (type 15h) to set disc in 'Restricted Overwrite Mode'.
1:59:04 AM #19 Phase 136 File dlgbrnst.cpp, Line 1855
Quick Format DVD-RW
1:59:12 AM #20 Phase 65 File dlgbrnst.cpp, Line 1855
Burn process started
1:59:12 AM #21 Text 0 File DVDR.cpp, Line 2000
Recording mode: Sequential Recording Mode for Multisession
1:59:12 AM #22 Text 0 File Mmc.cpp, Line 20660
Set BUFE: BURN-Proof -> ON
1:59:12 AM #23 Text 0 File DVDR.cpp, Line 2141
Start write address at LBA 0
DVD high compatibility mode: Yes
1:59:12 AM #24 Text 0 File Cdrdrv.cpp, Line 8230
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-RW (3), Part Version: 2
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
1:59:12 AM #25 CDR -1207 File DVDR.cpp, Line 4509
Book Type automatically set to: DVD-ROM
1:59:12 AM #26 Text 0 File DVDR.cpp, Line 4877
Drive: PLEXTOR DVDR PX-716A
Book Type request: DVD-ROM
Book Type setting not supported for the loaded disc type
1:59:14 AM #27 Text 0 File Cdrdrv.cpp, Line 1297
01:59:14.031 - PLEXTOR DVDR PX-716A\H1 T1 : Queue again later
1:59:16 AM #28 SCSI -1039 File Cdrdrv.cpp, Line 1445
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x06680000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x09
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x04 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x09 0x02
1:59:16 AM #29 CDR -1039 File Writer.cpp, Line 304
Focus or tracking error
1:59:16 AM #30 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
1:59:17 AM #31 Text 0 File DVDR.cpp, Line 2383
EndDAO: Last written address was 31
1:59:17 AM #32 Phase 133 File dlgbrnst.cpp, Line 1855
Writing short lead-out
1:59:23 AM #33 SCSI -1039 File Cdrdrv.cpp, Line 1191
SCSI Exec, HA 1, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x09
Sense Qual: 0x02
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x04 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x09 0x02
1:59:52 AM #34 SCSI -1176 File Cdrdrv.cpp, Line 1191
SCSI Exec, HA 1, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x72
Sense Qual: 0x03
CDB Data: 0x5B 0x01 0x02 0x00 0x00 0x03 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x72 0x03
1:59:52 AM #35 Text 0 File DVDR.cpp, Line 4877
Drive: PLEXTOR DVDR PX-716A
Book Type request: DVD+R
Book Type setting not supported for the loaded disc type
1:59:52 AM #36 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 0:00,000 (0ms) -> OK
1:59:52 AM #37 CDR -1039 File WriterStatus.cpp, Line 164
Focus or tracking error
PLEXTOR DVDR PX-716A\H1 T1
1:59:52 AM #38 TRANSFER -24 File WriterStatus.cpp, Line 164
Could not perform end of Disc-at-once
1:59:52 AM #39 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 0:00,000 (0ms) -> OK
1:59:52 AM #40 Phase 38 File dlgbrnst.cpp, Line 1855
Burn process failed at 2x (2,770 KB/s)
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.02.57a, size=17168 bytes, created 7/30/2003 2:02:00 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.5512 (xpsp.080413-2108), size=96512 bytes, created 4/13/2008 1:40:30 PM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
Senior Member
|
10. September 2008 @ 03:56 |
Link to this message
|
You?ve got this-- Recorder: PLEXTOR DVD PX-716A, Media type: DVD-RW
Dvd-rw in the drive but are trying too book type it
1:59:12 AM #26 Text 0 File DVDR.cpp, Line 4877
Drive: PLEXTOR DVDR PX-716A
Book Type request: DVD-ROM
Book Type setting not supported for the loaded disc type
You need a dvd+
1:59:52 AM #35 Text 0 File DVDR.cpp, Line 4877
Drive: PLEXTOR DVDR PX-716A
Book Type request: DVD+R
Book Type setting not supported for the loaded disc type
in the short change the disk to a dvd+r also are you multi session when burning a image file ?ISO??
|
|
lifedrips
Newbie
|
10. September 2008 @ 21:10 |
Link to this message
|
what i did was i put my dvd in the drive and up loaded the files into my computer i then put the blank and pressed make video dvd. that didnt work so what i did next was i put the dvd back in and pressed copy dvd. after it uploaded into a temp folder it ask for a blank dvd. i put it in and the dvd burn failed. im pretty new to this durning stuff. are my setting correct? do i just need to buy dvd r only? if so why does it say this burner can use dvdrw?
|
|
Advertisement
|
|
|
AfterDawn Addict
|
11. September 2008 @ 03:18 |
Link to this message
|
|
|
