Quote:

---

Section "Files"
FontPath "/usr/share/fonts/X11/misc"
FontPath "/usr/X11R6/lib/X11/fonts/misc"
FontPath "/usr/share/fonts/X11/cyrillic"
FontPath "/usr/X11R6/lib/X11/fonts/cyrillic"
FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/fonts/X11/Type1"
FontPath "/usr/X11R6/lib/X11/fonts/Type1"
FontPath "/usr/share/fonts/X11/100dpi"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi"
FontPath "/usr/share/fonts/X11/75dpi"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi"
# path to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "vbe"
EndSection

Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc104"
Option "XkbLayout" "us"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
EndSection

Section "Device"
Identifier "Generic Video Card"
Driver "vesa"
BusID "PCI:7:2:0"
EndSection

Section "Monitor"
Identifier "Gateway EV70"
Option "DPMS"
HorizSync 30-70
VertRefresh 50-100
EndSection

Section "Screen"
Identifier "Default Screen"
Device "Generic Video Card"
Monitor "Gateway EV70"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1280x1024" "1024x768" "800x600"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x1024" "1024x768" "800x600"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x1024" "1024x768" "800x600"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x1024" "1024x768" "800x600"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x1024" "1024x768" "800x600"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600"
EndSubSection
EndSection

Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
EndSection

Section "DRI"
Mode 0666
EndSection

---

Quote:

---

00:00.0 Host bridge: Intel Corporation 5000V Chipset Memory Controller Hub (rev 93)
Subsystem: Hewlett-Packard Company Unknown device 31fd
Flags: bus master, fast devsel, latency 0
Capabilities: [50] Power Management version 2
Capabilities: [58] Message Signalled Interrupts: Mask- 64bit- Queue=0/1 Enable-
Capabilities: [6c] Express Root Port (Slot-) IRQ 0
Capabilities: [100] Advanced Error Reporting

00:02.0 PCI bridge: Intel Corporation 5000 Series Chipset PCI Express x8 Port 2-3 (rev 93) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=01, subordinate=04, sec-latency=0
Capabilities: [50] Power Management version 2
Capabilities: [58] Message Signalled Interrupts: Mask- 64bit- Queue=0/1 Enable+
Capabilities: [6c] Express Root Port (Slot-) IRQ 0
Capabilities: [100] Advanced Error Reporting

00:03.0 PCI bridge: Intel Corporation 5000 Series Chipset PCI Express x4 Port 3 (rev 93) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
Capabilities: [50] Power Management version 2
Capabilities: [58] Message Signalled Interrupts: Mask- 64bit- Queue=0/1 Enable+
Capabilities: [6c] Express Root Port (Slot-) IRQ 0
Capabilities: [100] Advanced Error Reporting

00:10.0 Host bridge: Intel Corporation 5000 Series Chipset Error Reporting Registers (rev 93)
Subsystem: Hewlett-Packard Company Unknown device 31fd
Flags: fast devsel

00:10.1 Host bridge: Intel Corporation 5000 Series Chipset Error Reporting Registers (rev 93)
Subsystem: Hewlett-Packard Company Unknown device 31fd
Flags: fast devsel

00:10.2 Host bridge: Intel Corporation 5000 Series Chipset Error Reporting Registers (rev 93)
Subsystem: Hewlett-Packard Company Unknown device 31fd
Flags: fast devsel

00:11.0 Host bridge: Intel Corporation 5000 Series Chipset Reserved Registers (rev 93)
Subsystem: Hewlett-Packard Company Unknown device 31fd
Flags: fast devsel

00:13.0 Host bridge: Intel Corporation 5000 Series Chipset Reserved Registers (rev 93)
Subsystem: Hewlett-Packard Company Unknown device 31fd
Flags: fast devsel

00:15.0 Host bridge: Intel Corporation 5000 Series Chipset FBD Registers (rev 93)
Subsystem: Hewlett-Packard Company Unknown device 31fd
Flags: fast devsel

00:16.0 Host bridge: Intel Corporation 5000 Series Chipset FBD Registers (rev 93)
Subsystem: Hewlett-Packard Company Unknown device 31fd
Flags: fast devsel

00:1c.0 PCI bridge: Intel Corporation 631xESB/632xESB/3100 Chipset PCI Express Root Port 1 (rev 09) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=06, subordinate=06, sec-latency=0
Capabilities: [40] Express Root Port (Slot+) IRQ 0
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
Capabilities: [90] Subsystem: Hewlett-Packard Company Unknown device 31fe
Capabilities: [a0] Power Management version 2
Capabilities: [100] Virtual Channel
Capabilities: [180] Unknown (5)

00:1d.0 USB Controller: Intel Corporation 631xESB/632xESB/3100 Chipset UHCI USB Controller #1 (rev 09) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Unknown device 31fe
Flags: bus master, medium devsel, latency 0, IRQ 217
I/O ports at 1800 [size=32]

00:1d.1 USB Controller: Intel Corporation 631xESB/632xESB/3100 Chipset UHCI USB Controller #2 (rev 09) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Unknown device 31fe
Flags: bus master, medium devsel, latency 0, IRQ 225
I/O ports at 1820 [size=32]

00:1d.2 USB Controller: Intel Corporation 631xESB/632xESB/3100 Chipset UHCI USB Controller #3 (rev 09) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Unknown device 31fe
Flags: bus master, medium devsel, latency 0, IRQ 233
I/O ports at 1840 [size=32]

00:1d.3 USB Controller: Intel Corporation 631xESB/632xESB/3100 Chipset UHCI USB Controller #4 (rev 09) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Unknown device 31fe
Flags: bus master, medium devsel, latency 0, IRQ 169
I/O ports at 1860 [size=32]

00:1d.7 USB Controller: Intel Corporation 631xESB/632xESB/3100 Chipset EHCI USB2 Controller (rev 09) (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Unknown device 31fe
Flags: bus master, medium devsel, latency 0, IRQ 217
Memory at dfb00000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Capabilities: [58] Debug port

00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev d9) (prog-if 01 [Subtractive decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=07, subordinate=07, sec-latency=32
Memory behind bridge: df000000-df8fffff
Prefetchable memory behind bridge: 00000000de000000-00000000deffffff Capabilities: [50] Subsystem: Hewlett-Packard Company Unknown device 31fe

00:1f.0 ISA bridge: Intel Corporation 631xESB/632xESB/3100 Chipset LPC Interface Controller (rev 09)
Subsystem: Hewlett-Packard Company Unknown device 31fe
Flags: bus master, medium devsel, latency 0

00:1f.1 IDE interface: Intel Corporation 631xESB/632xESB IDE Controller (rev 09) (prog-if 8a [Master SecP PriP])
Subsystem: Hewlett-Packard Company Unknown device 31fe
Flags: bus master, medium devsel, latency 0, IRQ 233
I/O ports at <unassigned>
I/O ports at <unassigned>
I/O ports at <unassigned>
I/O ports at <unassigned>
I/O ports at 1880 [size=16]

00:1f.2 SATA controller: Intel Corporation 631xESB/632xESB SATA Storage Controller AHCI (rev 09) (prog-if 01 [AHCI 1.0])
Subsystem: Hewlett-Packard Company Unknown device 31fe
Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 225
I/O ports at 18b8 [size=8]
I/O ports at 18ac [size=4]
I/O ports at 18b0 [size=8]
I/O ports at 18a8 [size=4]
I/O ports at 18c0 [size=32]
Memory at dfb00400 (32-bit, non-prefetchable) [size=1K]
Capabilities: [70] Power Management version 2
Capabilities: [a8] #12 [0010]

01:00.0 PCI bridge: Intel Corporation 6311ESB/6321ESB PCI Express Upstream Port (rev 01) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=01, secondary=02, subordinate=03, sec-latency=0
Capabilities: [44] Express Upstream Port IRQ 0
Capabilities: [70] Power Management version 2
Capabilities: [80] Subsystem: Hewlett-Packard Company Unknown device 31fd
Capabilities: [100] Advanced Error Reporting

01:00.3 PCI bridge: Intel Corporation 6311ESB/6321ESB PCI Express to PCI-X Bridge (rev 01) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=01, secondary=04, subordinate=04, sec-latency=64
Capabilities: [44] Express PCI/PCI-X Bridge IRQ 0
Capabilities: [6c] Power Management version 2
Capabilities: [80] Subsystem: Hewlett-Packard Company Unknown device 31fd
Capabilities: [d8] PCI-X bridge device
Capabilities: [100] Advanced Error Reporting

02:00.0 PCI bridge: Intel Corporation 6311ESB/6321ESB PCI Express Downstream Port E1 (rev 01) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=02, secondary=03, subordinate=03, sec-latency=0
Capabilities: [44] Express Downstream Port (Slot+) IRQ 0
Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable+
Capabilities: [70] Power Management version 2
Capabilities: [80] Subsystem: Hewlett-Packard Company Unknown device 31fd
Capabilities: [100] Advanced Error Reporting

07:01.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5703X Gigabit Ethernet (rev 02)
Subsystem: Compaq Computer Corporation NC7781 Gigabit Server Adapter (PCI-X, 10,100,1000-T)
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 233
Memory at df800000 (64-bit, non-prefetchable) [size=64K]
[virtual] Expansion ROM at df820000 [disabled] [size=64K]
Capabilities: [40] PCI-X non-bridge device
Capabilities: [48] Power Management version 2
Capabilities: [50] Vital Product Data
Capabilities: [58] Message Signalled Interrupts: Mask- 64bit+ Queue=0/3 Enable-

07:02.0 VGA compatible controller: Matrox Graphics, Inc. MGA G200e [Pilot] ServerEngines (SEP1) (rev 02) (prog-if 00 [VGA])
Subsystem: Hewlett-Packard Company Unknown device 31fa
Flags: bus master, medium devsel, latency 128, IRQ 11
Memory at de000000 (32-bit, prefetchable) [size=16M]
Memory at df810000 (32-bit, non-prefetchable) [size=16K]
Memory at df000000 (32-bit, non-prefetchable) [size=8M]
[virtual] Expansion ROM at df830000 [disabled] [size=64K]
Capabilities: [dc] Power Management version 1

---

Originally posted by varnull:

---

Bleh!!.. I know what I mean. Creakster.. can you word it better than that?

---

Quote:

---

#
#
# Sample configuration file for the Common UNIX Printing System (CUPS)
# scheduler. See "man cupsd.conf" for a complete description of this
# file.
#

# Log general information in error_log - change "info" to "debug" for
# troubleshooting...
LogLevel warning

# Administrator user group...
SystemGroup lpadmin

# Only listen for connections from the local machine.
Listen localhost:631
Listen /var/run/cups/cups.sock

# Show shared printers on the local network.
Browsing On
BrowseOrder allow,deny
BrowseAllow @LOCAL

# Default authentication type, when authentication is required...
DefaultAuthType Basic

# Restrict access to the server...
<Location />
Order allow,deny
Allow localhost
</Location>

# Restrict access to the admin pages...
<Location /admin>
Encryption Required
Order allow,deny
Allow localhost
</Location>

# Restrict access to configuration files...
<Location /admin/conf>
AuthType Basic
Require user @SYSTEM
Order allow,deny
Allow localhost
</Location>

# Set the default printer/job policies...
<Policy default>
# Job-related operations must be done by the owner or an adminstrator...
<Limit Send-Document Send-URI Hold-Job Release-Job Restart-Job Purge-Jobs Set-Job-Attributes Create-Job-Subscription Renew-Subscription Cancel-Subscription Get-Notifications Reprocess-Job Cancel-Current-Job Suspend-Current-Job Resume-Job CUPS-Move-Job>
Require user @OWNER @SYSTEM
Order deny,allow
</Limit>

# All administration operations require an adminstrator to authenticate...
<Limit Pause-Printer Resume-Printer Set-Printer-Attributes Enable-Printer Disable-Printer Pause-Printer-After-Current-Job Hold-New-Jobs Release-Held-New-Jobs Deactivate-Printer Activate-Printer Restart-Printer Shutdown-Printer Startup-Printer Promote-Job Schedule-Job-After CUPS-Add-Printer CUPS-Delete-Printer CUPS-Add-Class CUPS-Delete-Class CUPS-Accept-Jobs CUPS-Reject-Jobs CUPS-Set-Default>
AuthType Basic
Require user @SYSTEM
Order deny,allow
</Limit>

# Only the owner or an administrator can cancel or authenticate a job...
<Limit Cancel-Job CUPS-Authenticate-Job>
Require user @OWNER @SYSTEM
Order deny,allow
</Limit>

<Limit All>
Order deny,allow
</Limit>
</Policy>

#
#

#
# Printcap: the name of the printcap file. Default is /etc/printcap.
# Leave blank to disable printcap file generation.
#

Printcap /var/run/cups/printcap

#
# PrintcapFormat: the format of the printcap file, currently either
# BSD or Solaris. The default is "BSD".
#

#PrintcapFormat BSD
#PrintcapFormat Solaris

#
# PrintcapGUI: the name of the GUI options panel program to associate
# with print queues under IRIX. The default is "/usr/bin/glpoptions"
# from ESP Print Pro.
#
# This option is only used under IRIX; the options panel program
# must accept the "-d printer" and "-o options" options and write
# the selected printer options back to stdout on completion.
#

#PrintcapGUI /usr/bin/glpoptions

# Encryption
Encryption IfRequested

# Only listen for connections from the local machine.
Listen localhost:631
Listen 192.168.1.10
Listen /var/run/cups/cups.sock

# Show shared printers on the local network.
Browsing On
BrowseOrder allow,deny
BrowseAllow @LOCAL

# Restrict access to the server...
<Location />
Order allow,deny
Allow localhost
Allow 192.168.*.*
</Location>

# Restrict access to the admin pages...
<Location /admin>
Encryption IfRequested
Order allow,deny
Allow localhost
Allow 192.168.1.10
</Location>

<Location /admin/conf>
AuthType Basic
Require user @SYSTEM
Order allow,deny
Allow localhost
Allow 192.168.1.10
</Location>

---