|
|
|
nero 8: can't burn data dvd invalid field in command, invalid track info
|
|
|
aquapolo
Newbie
|
21. October 2008 @ 12:22 |
Link to this message
|
i've been using nero 8 to burn data dvd's and nero vision to burn dvd movies, for quite some time now. lately i've been experiencing problems with this software as i can't seem to burn a data dvd, without having errors in the verification process. i tried doing a simulation burn first, but with simulation turned on, the software refuses to initiate the actual burn process. if i don't turn the simulation option on, the burn process would be successful, however, data verification would fail and i would end up with a data dvd with some file on it corrupted or damaged to the point that i would not be able to access those said files. i tried uninstalling nero 8 and used nero 8 clean tool, i did another clean install but to no avail. i tried using NTI media maker 8, and it did burn and verify a data dvd successfully but there are errors on some files when i access it, either the files would not be accessed or would hang in the middle of the process. i have also tried lowering the write speed to 2x instead of 8x in case the burner could not burn at that speed. i'am wondering now, is it my dvd burner: sony dw-q58a or is it nero or is it my OS that is causing such errors and how do i go about it? i am in need of writing some of my files to facilitate a reformat on my HDD. i hope some of you would shed some light. here's the most recent log file on my latest attempt at burning a data dvd using nero 8 with the simulation option turned on. TIA to those who would answer.
Windows XP 5.1
IA32
WinAspi: -
NT-SPTI used
Nero Version: 8.3.2.1
Internal Version: 8, 3, 2, 1
Recorder: <SONY DVD+-RW DW-Q58A> Version: UDS2 - HA 1 TA 0 - 8.3.2.1
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default
CD-ROM: <SONY DVD+-RW DW-Q58A >Version: UDS2 - HA 1 TA 0 - 8.3.2.1
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD400VE-75HDT1 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : SONY DVD+-RW DW-Q58A atapi Port 0 ID 1 DMA: On
=== CDRom-Device-Map ===
SONY DVD+-RW DW-Q58A D: CdRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 73400320 (0) Byte
BUFE : 0
Physical memory : 503MB (515452kB)
Free physical memory: 191MB (196184kB)
Memory in use : 61 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
21.10.2008
ISO compilation
11:13:00 PM #1 Text 0 File SCSIPTICommands.cpp, Line 450
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
11:13:00 PM #2 Text 0 File Isodoc.cpp, Line 6713
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : TRUE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
11:13:00 PM #3 Phase 83 File dlgbrnst.cpp, Line 1767
Virus scanning started
11:13:00 PM #4 Text 0 File Isodoc.cpp, Line 6477
Nero found 0 infected files among the 6 scanned files.
11:13:00 PM #5 Phase 84 File dlgbrnst.cpp, Line 1767
Virus scanning completed
11:13:00 PM #6 ISO9660GEN -11 File Geniso.cpp, Line 3349
First writeable address = 0 (0x00000000)
11:13:00 PM #7 Text 0 File Burncd.cpp, Line 3568
Turn on Disc-At-Once, using DVD media
11:13:00 PM #8 Text 0 File FilesystemSettingsValidator.cpp, Line 142
FS Settings: using validator 'CUDFSettingsValidatorDVD'
ParamMode = 'automatic', changing UDF partition type from 'physical' to 'physical'
Changing UDF revision from '1.02' to '1.02'
11:13:00 PM #9 Text 0 File DlgWaitCD.cpp, Line 311
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2209487 (490:59.62, 4315MB)
11:13:00 PM #10 Text 0 File DlgWaitCD.cpp, Line 323
Write in overburning mode: NO (enabled: CD)
11:13:00 PM #11 Text 0 File DlgWaitCD.cpp, Line 2932
Recorder: SONY DVD+-RW DW-Q58A, Media type: DVD-R
Disc Manufacturer ID: <MCC 03> <RG20 >
Disc Application Code: 64, Disc Physical Code: 193
11:13:00 PM #12 Text 0 File DlgWaitCD.cpp, Line 497
>>> Protocol of DlgWaitCD activities: <<<
=========================================
11:13:00 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 754
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2209488 (2209488) = #2209488/490:59.63
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2209488 blocks [D: SONY DVD+-RW DW-Q58A]
--------------------------------------------------------------
11:13:00 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 956
Prepare [D: SONY DVD+-RW DW-Q58A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4525031424, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 2209488 | 0 | 0x00
2209488 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
11:13:00 PM #15 Text 0 File SCSIPTICommands.cpp, Line 240
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME
11:13:01 PM #16 Text 0 File Burncd.cpp, Line 4359
Caching options: cache CDRom or Network-Yes, small files-No (<64KB)
11:13:01 PM #17 Phase 24 File dlgbrnst.cpp, Line 1767
Caching of files started
11:13:01 PM #18 Text 0 File Burncd.cpp, Line 4481
Cache writing successful.
11:13:01 PM #19 Phase 25 File dlgbrnst.cpp, Line 1767
Caching of files completed
11:13:01 PM #20 Phase 32 File dlgbrnst.cpp, Line 1767
Simulation started at 2x (2,770 KB/s)
11:13:01 PM #21 Text 0 File ThreadedTransferInterface.cpp, Line 2673
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
11:13:01 PM #22 Text 0 File DVDR.cpp, Line 3280
Recording mode: Sequential Recording Mode
11:13:01 PM #23 Text 0 File DVDR.cpp, Line 3434
Start write address at LBA 0
DVD high compatibility mode: Yes
11:13:01 PM #24 Text 0 File Cdrdrv.cpp, Line 10164
---- Disc Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Transfer Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
Outer Limit of Data Recordable Area: 26127F h
Data in Burst Cutting Area (BCA) does not exist
Revision number of maximum recording speed: 6.0
Revision number of minimum recording speed: -
Revision number table of recording speed: - - - - - - -
Class: 0, Extended part version: 0
Start PSN of the Extra Border Zone: 0 h
Start PSN of Physical format information blocks in Extra Border Zone: 0 h
Media Specific [16..783]:
00 60 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 .`..............
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
1D 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
01 40 C1 FD 9E D8 52 00 - 02 85 0D 0E 88 9A 80 00 .@....R.........
03 4D 43 43 20 30 33 00 - 04 52 47 32 30 20 20 00 .MCC.03..RG20...
05 88 80 00 00 00 02 00 - 06 09 0B 14 87 78 90 00 .............x..
07 88 80 00 00 00 00 00 - 08 08 13 0D 11 0C 08 00 ................
09 05 07 0E 0B 78 88 00 - 0A A0 00 20 00 20 10 00 .....x..........
0B 06 1A 17 86 67 85 00 - 0C 99 AB 3A 83 20 32 00 .....g.....:..2.
0D 00 00 D0 00 00 00 00 - 0E 0A 1A 35 2F 29 1A 00 ...........5/)..
0F 50 1B 29 17 97 B5 00 - 10 88 80 00 00 00 00 00 .P.)............
11 00 00 00 00 00 00 00 - 12 09 25 37 2F 29 19 00 ..........%7/)..
13 50 1B 29 17 97 B5 00 - 14 88 80 00 00 00 00 00 .P.)............
15 00 00 00 00 00 00 00 - 16 09 35 44 3D 24 29 00 ..........5D=$).
17 60 1F 2F 1D 97 B5 00 - 18 88 84 00 04 00 04 00 .`./............
19 00 00 00 00 00 00 00 - 1A 08 4D 46 42 27 24 00 ..........MFB'$.
1B 70 1F 2B 0F AA B5 00 - 1C 88 84 00 04 00 04 00 .p.+............
1D 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
11:13:01 PM #25 Text 0 File DVDR.cpp, Line 3572
Reserved Track size: 2209488 (21B6D0h, 4315MB) -> return code 0
11:13:01 PM #26 Text 0 File ThreadedTransfer.cpp, Line 269
Pipe memory size 73340800
11:13:01 PM #27 Text 0 File Cdrdrv.cpp, Line 1404
23:13:01.515 - D: SONY DVD+-RW DW-Q58A : Queue again later
11:40:51 PM #28 Text 0 File WriterStatus.cpp, Line 245
<D: SONY DVD+-RW DW-Q58A> start writing Lead-Out at LBA 2209488 (21B6D0h), length 0 blocks
11:41:35 PM #29 Text 0 File DVDR.cpp, Line 3840
EndDAO: Last written address was 2209487 (21B6CFh)
11:41:35 PM #30 Phase 33 File dlgbrnst.cpp, Line 1767
Simulation completed successfully at 2x (2,770 KB/s)
11:41:35 PM #31 Phase 36 File dlgbrnst.cpp, Line 1767
Burn process started at 2x (2,770 KB/s)
11:41:35 PM #32 Text 0 File ThreadedTransferInterface.cpp, Line 2673
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
11:41:35 PM #33 CDR -1066 File ThreadedTransferInterface.cpp, Line 1647
Invalid field in command
D: SONY DVD+-RW DW-Q58A
11:41:35 PM #34 TRANSFER -35 File ThreadedTransferInterface.cpp, Line 1647
Invalid track info
11:41:35 PM #35 Text 0 File ThreadedTransfer.cpp, Line 269
Pipe memory size 73340800
11:41:35 PM #36 Phase 38 File dlgbrnst.cpp, Line 1767
Burn process failed at 2x (2,770 KB/s)
11:41:35 PM #37 Text 0 File SCSIPTICommands.cpp, Line 287
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
11:41:37 PM #38 Text 0 File Cdrdrv.cpp, Line 11420
DriveLocker: UnLockVolume completed
11:41:37 PM #39 Text 0 File SCSIPTICommands.cpp, Line 450
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
|
Advertisement
|
|
|
|
AfterDawn Addict
|
21. October 2008 @ 14:57 |
Link to this message
|
|
The laser lens on laptop burners can get dirty very easily. Try giving it a real good cleaning.
If you happen to have a different brand of media available, try them.
99% of all problems are between the computer and the chair.
|
|
aquapolo
Newbie
|
1. January 2009 @ 14:43 |
Link to this message
|
|
problem still not resolved, advices would be highly appreciated. thanks.
|
|
gem222
Newbie
|
18. January 2009 @ 16:27 |
Link to this message
|
Hi,
I've been having problems burning data dvd's in nero. I thought it was the software, so I downloaded some burn4free program which also gave me an error. I have been able to burn cd's and video dvd's fine. I can also play cd's and dvd's fine. I have a Matshita UJ-840D drive which I can't find firmware to update. I'm not a computer expert so I'm not sure what to do next. Below is the log of my last try
See log here:
http://forums.afterdawn.com/thread_view.cfm/741219
This message has been edited since posting. Last time this message was edited on 18. January 2009 @ 18:41
|
|
Advertisement
|
|
|
Moderator
|
18. January 2009 @ 18:40 |
Link to this message
|
|
|
