|
|
|
burning DVD DL with Nero 8
|
|
Junior Member
|
28. October 2008 @ 10:39 |
Link to this message
|
Hi, I was trying to burn a DVD+R DL but until now I always failed.
Hear is my full log, I hope someone could help me.
Basically what Nero says me before stops itself is something like "illegal disk". Well I really don't know...
Thanks a lot,
Stefano.
7K22-*serial number removed*
Windows XP 5.1
IA32
WinAspi: -
NT-SPTI used
Nero Version: 8.3.2.1
Internal Version: 8, 3, 2, 1
Recorder: <PHILIPS DVD8631> Version: JB15 - HA 1 TA 1 - 8.3.2.1
Adapter driver: <USB 2.0> HA 1
Drive buffer : 2048kB
Bus Type : set to ATAPI
CD-ROM: <HL-DT-ST DVD-ROM GDR8162B>Version: 0018 - HA 1 TA 0 - 8.3.2.1
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
CdRomPeripheral : HL-DT-ST DVD-ROM GDR8162B atapi Port 1 ID 0 DMA: On
DiskPeripheral : RAID_Volume1 iaStor Port 2 ID 0 DMA: On
=== CDRom-Device-Map ===
HL-DT-ST DVD-ROM GDR8162B D: CdRom0
PHILIPS DVD8631 E: CdRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 2047MB (2097151kB)
Free physical memory: 2047MB (2097151kB)
Memory in use : 21 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
28.10.2008
ISO compilation
3:00:23 PM #1 Text 0 File SCSIPTICommands.cpp, Line 450
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
3:00:23 PM #2 Text 0 File Isodoc.cpp, Line 6713
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
3:00:23 PM #3 ISO9660GEN -11 File Geniso.cpp, Line 3349
First writeable address = 0 (0x00000000)
3:00:24 PM #4 Text 0 File Burncd.cpp, Line 3568
Turn on Disc-At-Once, using DVD media
3:00:25 PM #5 Text 0 File FilesystemSettingsValidator.cpp, Line 142
FS Settings: using validator 'CUDFSettingsValidatorDVD'
ParamMode = 'automatic', changing UDF partition type from 'physical' to 'physical'
Changing UDF revision from '1.02' to '1.02'
3:00:25 PM #6 Text 0 File DlgWaitCD.cpp, Line 311
Last possible write address on media: 4173823 (927:30.73, 8151MB)
Last address to be written: 3655775 (812:23.50, 7140MB)
3:00:25 PM #7 Text 0 File DlgWaitCD.cpp, Line 323
Write in overburning mode: NO (enabled: CD)
3:00:25 PM #8 Text 0 File DlgWaitCD.cpp, Line 2932
Recorder: PHILIPS DVD8631, Media type: DVD+R DL
Disc Manufacturer ID: <RITEK>, Media Type ID: <S04>, Product revision number: 66
Disc Application Code: 0, Extended Information Indicators: 0
3:00:25 PM #9 Text 0 File DlgWaitCD.cpp, Line 497
>>> Protocol of DlgWaitCD activities: <<<
=========================================
3:00:25 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 754
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 3655776 (3655776) = #3655776/812:23.51
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 3655776 blocks [E: PHILIPS DVD8631]
--------------------------------------------------------------
3:00:25 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 956
Prepare [E: PHILIPS DVD8631] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 7487029248, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 3655776 | 0 | 0x00
3655776 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
3:00:25 PM #12 Text 0 File SCSIPTICommands.cpp, Line 240
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME
3:00:25 PM #13 Text 0 File Burncd.cpp, Line 4359
Caching options: cache CDRom or Network-Yes, small files-No (<64KB)
3:00:25 PM #14 Phase 24 File dlgbrnst.cpp, Line 1767
Caching of files started
3:00:25 PM #15 Text 0 File Burncd.cpp, Line 4481
Cache writing successful.
3:00:25 PM #16 Phase 25 File dlgbrnst.cpp, Line 1767
Caching of files completed
3:00:25 PM #17 Phase 36 File dlgbrnst.cpp, Line 1767
Burn process started at 2.4x (3,324 KB/s)
3:00:25 PM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2673
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
3:00:25 PM #19 Text 0 File DVDPlusDualLayer.cpp, Line 580
Disc finalized, LBA total Image size: 3655776 (7140MB), Last LBA L0: 1827887 (3570MB)
3:00:25 PM #20 Text 0 File DVDPlusDualLayer.cpp, Line 745
L0 Data Zone Capacity set to 1827888 (1BE430h, 3570MB) -> OK, confirmed setting
3:00:25 PM #21 CDR -1205 File DVDPlusDualLayer.cpp, Line 772
Burning Layer 1
3:00:25 PM #22 Text 0 File DVDPlusDualLayer.cpp, Line 782
Start writing layer 1 at address 0 (0h)
Recording mode: unknown Recording Mode
3:00:25 PM #23 Text 0 File Cdrdrv.cpp, Line 10164
---- Disc Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R DL (14), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Transfer Rate: <not specified> (F h)
Number of Layers: 2, Track Path: Opposite Track Path (OTP), Layer Type: recordable
Linear Density: 0,293 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: FCFFFF h
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 0 h
Disc Manufacturer ID: RITEK...
Media type ID: S04
Product revision number: 66
Number of Physical format information bytes in use in ADIP up to byte 63: 64
Media Specific [16..783]:
00 00 00 52 49 54 45 4B - 00 00 00 53 30 34 42 40 ...RITEK...S04B@
25 25 37 10 00 2C 6C 00 - 2C 6C 20 1F 0C 0C 14 14 %%7..,l.,l......
02 01 01 20 00 20 1F 0C - 0C 14 14 02 01 01 20 00 ................
04 00 33 7B 5C 00 25 69 - 3A 26 1C 0A 0B 20 02 01 ..3{\.%i:&......
01 00 00 58 62 42 26 1C - 0A 0B 20 02 01 01 00 5F ...XbB&........_
84 00 00 43 66 3E 26 1C - 0A 0B 20 02 01 01 00 00 ...Cf>&.........
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
3:00:25 PM #24 Text 0 File DVDR.cpp, Line 7494
Drive: PHILIPS DVD8631
Book Type request [gen]: DVD-ROM, write to EEPROM
Changing the Book Type was finished successfully, return code 0
3:00:25 PM #25 CDR -1211 File DVDR.cpp, Line 6595
Book Type set to: DVD-ROM
3:00:25 PM #26 Text 0 File DVDPlusRW.cpp, Line 675
Start write address at LBA 0
DVD high compatibility mode: Yes
3:00:25 PM #27 Text 0 File ThreadedTransfer.cpp, Line 269
Pipe memory size 83836800
3:00:26 PM #28 SPTI -1046 File SCSIPassThrough.cpp, Line 196
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1046)
CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
Sense Area: 0x70 00 05 00 00 00 00 12 00 00 00 00 30 05
Buffer x08f90040: Len x10000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
3:00:26 PM #29 CDR -1046 File Writer.cpp, Line 306
Illegal disc
E: PHILIPS DVD8631
3:00:26 PM #30 Phase 127 File dlgbrnst.cpp, Line 1767
Generating DVD high compatibility borders
3:00:26 PM #31 Text 0 File DVDPlusRW.cpp, Line 935
EndDAO: Last written address 0
3:00:26 PM #32 Phase 129 File dlgbrnst.cpp, Line 1767
Generating DVD borders completed successfully
3:00:26 PM #33 Text 0 File DVDR.cpp, Line 7494
Drive: PHILIPS DVD8631
Book Type request [gen]: DVD+R DL, write to EEPROM
Changing the Book Type was finished successfully, return code 0
3:00:26 PM #34 Phase 38 File dlgbrnst.cpp, Line 1767
Burn process failed at 2.4x (3,324 KB/s)
3:00:26 PM #35 Text 0 File SCSIPTICommands.cpp, Line 287
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
3:00:27 PM #36 SPTI -1176 File SCSIPassThrough.cpp, Line 196
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1176)
CDB Data: 0x1B 00 00 00 02 00 00 00 00 00 00 00
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x72
Sense Qual: 0x01
Sense Area: 0x70 00 03 00 00 00 00 12 00 00 00 00 72 01
3:00:29 PM #37 Text 0 File Cdrdrv.cpp, Line 11420
DriveLocker: UnLockVolume completed
3:00:29 PM #38 Text 0 File SCSIPTICommands.cpp, Line 450
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
This message has been edited since posting. Last time this message was edited on 1. November 2008 @ 14:38
|
|
Advertisement
|
 |
|
|
Senior Member
|
31. October 2008 @ 17:44 |
Link to this message
|
More than likely it's your drive. It's old, at least 3 yrs, and only burns DLs @ 2.4x according to videohelp.com. The media you are using burns best at about 6x. It's also very possible your drive doesn't support this media, which will result in poor burns.
Try to find some 2.4x Verbatim DLs. They are more expensive than the Riteks but might work in your drive.
You drive is also not well liked, read this thread for some info.
This message has been edited since posting. Last time this message was edited on 31. October 2008 @ 17:44
|
Junior Member
|
1. November 2008 @ 06:13 |
Link to this message
|
|
Hi hobbit112,
thanks for your reply.
I do agree with you about my burner...I really believe that it's time to buy a new disant one!
Could you suggest me a couple of new brand burners with which I'll never had any more such types of problems?
Regards,
Stefano.
|
Senior Member
|
1. November 2008 @ 08:52 |
Link to this message
|
Welcome to AD Stefano!
For drives, my favorite at the moment is my NEC/Optiarc 7200S, I also have a Samsung 203b which I also like but not as much as the NEC. These are SATA drives but there is also an IDE version. I also like the Lite-Ons and have heard that the Pioneers ans Asus's are also very good. Plextors were also very good but I think I heard that they are starting to rebadge drvies, but I may be confused.
You can check out this thread, it's supposed to discuss drives in addtion to media.
BTW, I have transitioned from Nero to a free program called ImgBurn for burning DL media. You have better control over the burning speed for DLs (Nero used to have a problem with that) and can easily book-type if your drive supports the procedure. ImgBurn also will keep a log of your burning speeds for each media descriptor you use, i.e., you no longer have to remember that Ritek S04's burn best @ 6x, Verbatim MKM 001's burn best @ 4x, etc (these are examples, your speeds may vary).
|
Junior Member
|
1. November 2008 @ 11:13 |
Link to this message
|
|
Thanks mate, I'll try to read about the NEC/Optiarc 7200S.
In case I would be use the one with a SATA interface, winch card do you recommend?
Stefano
|
Senior Member
|
2. November 2008 @ 14:48 |
Link to this message
|
You will need to get a SATA card with a Silicon Image controller chip. The one I have has the Sil3114 chip and works well. It's been my experience that if you choose a SATA card without a SI chip, you could have problems updating the firmware of your drive connected to it. I'm speaking from experience here, the first SATA card I got did not have the SI controller chip and when I went to update my drive, a Lite-On at the time, thank God, the update didn't 'take' and my drive was bricked. Luckily, when I got a SATA card with the SI chip I was able to re-flash the drive and get it back working.
I've got a Rosewill RC209 adaptor. If I was looking for another adaptor card I'd get a Rosewill RC209-EX. This card has 2 external eSATA connectors in addtion to the internal SATA connectors so you can connect external SATA devices to it.
|
Junior Member
|
2. November 2008 @ 16:02 |
Link to this message
|
Thanks hobbit112,
I had a look to the NEC/Optiarc series and they seems to be a very good choice.
What about the Sony drives? Are they good as well as the NEC/Optiarc?
Should the combination of a Rosewill RC209-EX card plus a BWU-300S drive give to me a safety burn solution?
Stefano.
P.S.
I introduced the Sony BWU-300S because I was looking for blue ray burner too.
|
Senior Member
|
2. November 2008 @ 19:39 |
Link to this message
|
I know little about the blu-ray burners other than they are pricey. I also know that if you are going to burn blu-ray material for replay in stand-alones, it's iffy. Most of the guides here are for playback in PS3s. For playback in other machines, it's almost model by model and firmware by firmware. For instance, I have a blu-ray player, a Sharp BD20U, and it will not play BDMV recordings (what most, if not all, of the guides here create), but it supposedly will play BDAV, BD5 & BD9s (BD5 & BD9s are blu-ray structure burned to regular dvds, but different structure than BDMV). It also will not play AVCHD discs as Sharp says that AVCHD is Sony copywrite and there are licensing issues. I have been unable to burn a disc with blu-ray format(on standard dvd) that will play in my standalone.
|
Junior Member
|
2. November 2008 @ 19:50 |
Link to this message
|
|
Right, I can see your point and I think that I do agree with you.
Just one more thing, where can I buy both card and drive?
Because I'm Italian and I'm living in Italy.
Thanks again,
Stefano.
|
Senior Member
|
2. November 2008 @ 22:53 |
Link to this message
|
|
Can't help you there Stefano. I get alot of my components from Newegg.
Where do you get your computer supplies? Maybe find a computer shop and ask?
|
|
Advertisement
|
|
|
Junior Member
|
3. November 2008 @ 02:36 |
Link to this message
|
I know what you mean, I have an Hp computer and I'll try to ask around.
In any case many thanks all for your help,
Stefano.
|
|
