|
|
|
Problem to burn Dual layer
|
|
|
orlf
Newbie
|
20. November 2008 @ 06:13 |
Link to this message
|
hello guy's i'm new here and i have one question..
i will try to explain the best that i can because my english is not very well...ok so i have a problem with my DVD burner i tried to burn a dual layer(8.5GB)CD and all that i get is an eror that say "Could not perform start of Disc-at-once" so i tried to buy different CD's but this is not the problem now i have those CD's
"Verbatim DVD+R DL 8X" and i try to switch software from nero 7 to imgburn or to nero 9 ultra(and now i use nero9) and it's not work so i came here this is my DVD R :
HL-DT-ST DVDRAM GSA 4160B
and this is the Log in nero 9 thanks=]
Windows XP 5.1
IA32
WinAspi: -
NT-SPTI used
Nero Version: 9.0.9.100
Internal Version: 9, 0, 9, 100
Recorder: <HL-DT-ST DVDRAM GSA-4160B>Version: A306 - HA 1 TA 0 - 9.0.9.100
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default
CD-ROM: <HL-DT-ST DVDRAM GSA-4160B>Version: A306 - HA 1 TA 0 - 9.0.9.100
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4160B atapi Port 1 ID 0 DMA: On
DiskPeripheral : WDC WD1600JS-00MHB0 atapi Port 2 ID 0 DMA: On
DiskPeripheral : Hitachi HDS721616PLA380 atapi Port 5 ID 0 DMA: On
=== CDRom-Device-Map ===
HL-DT-ST DVDRAM GSA-4160B D: CdRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 2047MB (2096172kB)
Free physical memory: 1552MB (1590084kB)
Memory in use : 24 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
20.11.2008
Burn DVD Image
18:54:07 #1 Text 0 File SCSIPTICommands.cpp, Line 450
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
18:54:07 #2 Text 0 File Burncd.cpp, Line 3563
Turn on Disc-At-Once, using DVD media
18:54:07 #3 Text 0 File DlgWaitCD.cpp, Line 312
Last possible write address on media: 4173823 (927:30.73, 8151MB)
Last address to be written: 3648895 (810:51.70, 7126MB)
18:54:07 #4 Text 0 File DlgWaitCD.cpp, Line 324
Write in overburning mode: NO (enabled: CD)
18:54:07 #5 Text 0 File DlgWaitCD.cpp, Line 2951
Recorder: HL-DT-ST DVDRAM GSA-4160B, Media type: DVD+R DL
Disc Manufacturer ID: <MKM>, Media Type ID: <003>, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 3
18:54:07 #6 Text 0 File DlgWaitCD.cpp, Line 499
>>> Protocol of DlgWaitCD activities: <<<
=========================================
18:54:07 #7 Text 0 File ThreadedTransferInterface.cpp, Line 756
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, Joliet)
2 indices, index0 (150) not provided
original disc pos #0 + 3648896 (3648896) = #3648896/810:51.71
not relocatable, disc pos for caching/writing not required/not required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 3648896 blocks [D: HL-DT-ST DVDRAM GSA-4160B]
--------------------------------------------------------------
18:54:07 #8 Text 0 File ThreadedTransferInterface.cpp, Line 958
Prepare [D: HL-DT-ST DVDRAM GSA-4160B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 7472939008, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 3648896 | 3648896 | 0x00
3648896 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
18:54:07 #9 Text 0 File SCSIPTICommands.cpp, Line 240
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME
18:54:07 #10 Text 0 File Burncd.cpp, Line 4362
Caching options: cache CDRom or Network-Yes, small files-No (<64KB)
18:54:07 #11 Phase 24 File dlgbrnst.cpp, Line 1767
Caching of files started
18:54:08 #12 Text 0 File Burncd.cpp, Line 4484
Cache writing successful.
18:54:08 #13 Phase 25 File dlgbrnst.cpp, Line 1767
Caching of files completed
18:54:08 #14 Phase 36 File dlgbrnst.cpp, Line 1767
Burn process started at 5x (6,925 KB/s)
18:54:08 #15 Text 0 File ThreadedTransferInterface.cpp, Line 2675
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
18:54:08 #16 Text 0 File DVDPlusDualLayer.cpp, Line 1856
GetDriveCaps: LAST LBA of layer 1 is 0
18:54:08 #17 Text 0 File DVDPlusDualLayer.cpp, Line 1424
SetDriveCaps: Set LAST LBA of layer 1 to 1824447
18:54:08 #18 Text 0 File DVDPlusDualLayer.cpp, Line 1856
GetDriveCaps: LAST LBA of layer 1 is 1824447
18:54:08 #19 Text 0 File DVDPlusDualLayer.cpp, Line 592
Disc finalized, LBA total Image size: 3648896 (7126MB), Last LBA L0: 1824447 (3563MB)
18:54:08 #20 SPTI -1 File SCSIPassThrough.cpp, Line 215
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1)
CDB Data: 0xBF 00 00 00 00 00 00 20 00 0C 00 00
Sense Key: 0x07 (Unknown)
Sense Code: 0x27
Sense Qual: 0x00
Sense Area: 0x70 00 07 00 00 00 00 10 00 00 00 0E 27
Buffer x080f4240: Len xc
0x00 0A 00 00 00 00 00 00 00 1B D6 C0
18:54:08 #21 Text 0 File DVDPlusDualLayer.cpp, Line 768
L0 Data Zone Capacity not set.
Max LBA L0 2086911 (1FD7FFh, 4075MB), next writable address 0 (0h, 0MB)
18:54:08 #22 Text 0 File DVDPlusDualLayer.cpp, Line 1424
SetDriveCaps: Set LAST LBA of layer 1 to 0
18:54:08 #23 CDR -1 File ThreadedTransferInterface.cpp, Line 1682
Unspecified Recorder Error
D: HL-DT-ST DVDRAM GSA-4160B
18:54:08 #24 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1682
Could not perform start of Disc-at-once
18:54:08 #25 Text 0 File DVDPlusDualLayer.cpp, Line 1424
SetDriveCaps: Set LAST LBA of layer 1 to 0
18:54:08 #26 Text 0 File ThreadedTransfer.cpp, Line 273
Pipe memory size 83836800
18:54:08 #27 Phase 38 File dlgbrnst.cpp, Line 1767
Burn process failed at 5x (6,925 KB/s)
18:54:08 #28 Text 0 File SCSIPTICommands.cpp, Line 287
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
18:54:11 #29 Text 0 File Cdrdrv.cpp, Line 11444
DriveLocker: UnLockVolume completed
18:54:11 #30 Text 0 File SCSIPTICommands.cpp, Line 450
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
This message has been edited since posting. Last time this message was edited on 20. November 2008 @ 11:57
|
|
orlf
Newbie
|
13. December 2008 @ 07:51 |
Link to this message
|
|
please help=]
|
|
