|
|
|
DVD+R DL burn failures with Nero 7
|
|
|
leoliver
Junior Member
|
23. November 2008 @ 23:32 |
Link to this message
|
Hi Everyone,
Today I suffered 2 - DVD+R DL burn failures , on my WinXP Pro SP3 computer. I was attempted to burn with both DVDFabPlatinum 5.1.1.0 and Nero 7 burning ROM. I was trying to write DVD files.
I tried with 2-separate DVD titles , that I had on my hard drive. Both DVD movies play back fine on my computer. I just can't get either one on a disk.
I'm using my SONY DVD RW DRU-720A external USB 2.0 burner. The drive works fine with 4.7 GB. DVDs . For the DVD 8.5 GB disks, I'm using Sony DVD+R DL disks .
The burn failure I had with DVDFab Platinum 5.1.1.0 , had a sudden "device unaccessible" error while the burn was working.
And I used DVDFab Platinum 5.1.1.0 to reset my DMA, but that didn't help.
With Nero 7 burning ROM , I first had a successful burn with a DVD 4.7 disk, but when I tried burning a 6.45 GB DVD folder , to a Sony DVD+R DL disk , it failed. I selected my recorder to the "physical disk type" for book type , and to "write extended lead out to dual layer disks" in Nero recorder settings. All started out well, but then I got some sort of "address error" and Nero said burn failure .
I'm attaching my Nero log with this post.
I've had my SONY DVD RW DRU-720A drive for about 1-1/2 years, and this is only the 2nd time I've burned to DVD+R DL disks.
The previous time worked , but I used Verbatim disks, not Sony disks. I thought Sony disks would work well with a Sony burner ?
Could someone look over my Nero log file, and give me some feedback on what the problem may be ? This very frustrating , and these dual layer disks are expensive !
Thanks .
Lawrence E. Oliver
Home
Windows XP 5.1
IA32
WinAspi: -
NT-SPTI used
Nero Version: 7.11.10.0
Internal Version: 7, 11, 10, 0
Recorder: <SONY DVD RW DRU-720A> Version: JYC4 - HA 1 TA 3 - 7.11.10.0
Adapter driver: <USB 2.0> HA 1
Drive buffer : 2048kB
Bus Type : set to ATAPI
CD-ROM: <HL-DT-ST CD-RW GCE-8481B >Version: C102 - HA 1 TA 1 - 7.11.10.0
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y080L0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : SAMSUNG DVD-ROM SD-616T atapi Port 1 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST CD-RW GCE-8481B atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
SAMSUNG DVD-ROM SD-616T D: CdRom0
HL-DT-ST CD-RW GCE-8481B E: CdRom1
SONY DVD RW DRU-720A F: CdRom3
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (83886080) Byte
BUFE : 0
Physical memory : 511MB (523268kB)
Free physical memory: 385MB (394284kB)
Memory in use : 24 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
23.11.2008
UDF/ISO compilation
07:47:51 PM #1 Text 0 File SCSIPTICommands.cpp, Line 450
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
07:47:52 PM #2 Phase 112 File dlgbrnst.cpp, Line 1767
DVD-Video files reallocation started
07:47:52 PM #3 Phase 114 File dlgbrnst.cpp, Line 1767
DVD-Video files reallocation completed (no file modified)
07:47:52 PM #4 Text 0 File Isodoc.cpp, Line 6711
UDF document burn settings
------------------------------------------
Determine maximum speed : TRUE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Options : automatic
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
07:47:52 PM #5 Phase 111 File dlgbrnst.cpp, Line 1767
DVD-Video files sorted
07:47:52 PM #6 ISO9660GEN -11 File Geniso.cpp, Line 3350
First writeable address = 0 (0x00000000)
07:47:52 PM #7 ISO9660GEN -11 File Geniso.cpp, Line 3350
First writeable address = 0 (0x00000000)
07:47:52 PM #8 Text 0 File Burncd.cpp, Line 3500
Turn on Disc-At-Once, using DVD media
07:47:52 PM #9 Text 0 File FilesystemSettingsValidator.cpp, Line 142
FS Settings: using validator 'CUDFSettingsValidatorDVD'
ParamMode = 'automatic', changing UDF partition type from 'physical' to 'physical'
Changing UDF revision from '1.02' to '1.02'
07:47:52 PM #10 ISO9660GEN -11 File Geniso.cpp, Line 3350
First writeable address = 0 (0x00000000)
07:47:52 PM #11 ISO9660GEN -11 File Geniso.cpp, Line 3350
First writeable address = 0 (0x00000000)
07:47:52 PM #12 Text 0 File DlgWaitCD.cpp, Line 307
Last possible write address on media: 4173823 (927:30.73, 8151MB)
Last address to be written: 3387071 (752:40.71, 6615MB)
07:47:52 PM #13 Text 0 File DlgWaitCD.cpp, Line 319
Write in overburning mode: NO
07:47:52 PM #14 Text 0 File DlgWaitCD.cpp, Line 2988
Recorder: SONY DVD RW DRU-720A, Media type: DVD+R DL
Disc Manufacturer ID: <RITEK>, Media Type ID: <D01>, Product revision number: 1
Disc Application Code: 0, Extended Information Indicators: 0
07:47:52 PM #15 Text 0 File DlgWaitCD.cpp, Line 493
>>> Protocol of DlgWaitCD activities: <<<
=========================================
07:47:52 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 778
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 3387072 (3387072) = #3387072/752:40.72
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 3387072 blocks [F:
SONY DVD RW DRU-720A]
--------------------------------------------------------------
07:47:52 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 979
Prepare [F: SONY DVD RW DRU-720A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 6936723456, ISRC
""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 3387072 | 0 | 0x00
3387072 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
07:47:52 PM #18 Text 0 File SCSIPTICommands.cpp, Line 240
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME
07:47:52 PM #19 Text 0 File Burncd.cpp, Line 4286
Caching options: cache CDRom or Network-Yes, small files-No (<64KB)
07:47:52 PM #20 Phase 24 File dlgbrnst.cpp, Line 1767
Caching of files started
07:47:52 PM #21 Text 0 File Burncd.cpp, Line 4405
Cache writing successful.
07:47:52 PM #22 Phase 25 File dlgbrnst.cpp, Line 1767
Caching of files completed
07:47:52 PM #23 Phase 28 File dlgbrnst.cpp, Line 1767
Speed measurement started
07:47:53 PM #24 Text 0 File ThreadedTransferInterface.cpp, Line 2726
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0):
write at #0
07:47:53 PM #25 Text 0 File ThreadedTransfer.cpp, Line 268
Pipe memory size 590400
07:52:53 PM #26 Text 0 File WriterStatus.cpp, Line 245
<F: SONY DVD RW DRU-720A> start writing Lead-Out at LBA 3387072 (33AEC0h), length 0 blocks
07:52:53 PM #27 Phase 29 File dlgbrnst.cpp, Line 1716
Speed measurement completed: 16.3x (22,550 KB/s)
07:52:53 PM #28 Phase 36 File dlgbrnst.cpp, Line 1767
Burn process started at 2.4x (3,324 KB/s)
07:52:53 PM #29 Text 0 File ThreadedTransferInterface.cpp, Line 2726
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0):
write at #0
08:01:39 PM #30 Text 0 File DVDPlusDualLayer.cpp, Line 745
L0 Data Zone Capacity set to 1693632 (19D7C0h, 3307MB) -> OK, confirmed setting
08:01:39 PM #31 CDR -1205 File DVDPlusDualLayer.cpp, Line 772
Burning Layer 1
08:01:39 PM #32 Text 0 File DVDPlusDualLayer.cpp, Line 782
Start writing layer 1 at address 0 (0h)
Recording mode: unknown Recording Mode
08:01:39 PM #33 Text 0 File Cdrdrv.cpp, Line 10161
---- Disc Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R DL (14), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Transfer Rate: <not specified> (F h)
Number of Layers: 2, Track Path: Opposite Track Path (OTP), Layer Type: recordable
Linear Density: 0,293 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: FCFFFF h
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 0 h
Disc Manufacturer ID: RITEK...
Media type ID: D01
Product revision number: 1
Number of Physical format information bytes in use in ADIP up to byte 63: 64
Media Specific [16..783]:
00 00 00 52 49 54 45 4B - 00 00 00 44 30 31 01 40 ...RITEK...D01.@
25 25 37 0C 00 28 64 00 - 28 64 20 1F 0C 0C 14 14 %%7..(d.(d......
02 01 01 20 00 20 1F 0C - 0C 14 14 02 01 01 20 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
E1 0F 32 10 00 03 00 00 - 00 FC FF FF 00 22 D7 FF ..2.........."..
00 00 00 52 49 54 45 4B - 00 00 00 44 30 31 01 40 ...RITEK...D01.@
25 25 37 14 00 28 64 00 - 28 64 1D 1D 0D 0D 11 11 %%7..(d.(d......
01 00 00 10 00 1D 1D 0D - 0D 11 11 01 00 00 10 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
08:01:40 PM #34 Text 0 File DVDR.cpp, Line 7133
Drive: SONY DVD RW DRU-720A
Book Type request [LO], rev 1: Physical disc type
Changing the Book Type was finished successfully, return code 0
08:01:40 PM #35 CDR -1211 File DVDR.cpp, Line 6528
Book Type set to: DVD+R DL
08:01:42 PM #36 Text 0 File DVDPlusRW.cpp, Line 675
Start write address at LBA 0
DVD high compatibility mode: Yes
08:01:42 PM #37 Text 0 File ThreadedTransfer.cpp, Line 268
Pipe memory size 83836800
08:04:14 PM #38 SPTI -1135 File SCSIPassThrough.cpp, Line 181
CdRom3: SCSIStatus(x02) WinError(0) NeroError(-1135)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x5C 00 00 00 00 00 00 00 0C 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 0C
Buffer x048b2580: Len xc
08:04:14 PM #39 SPTI -1064 File SCSIPassThrough.cpp, Line 181
CdRom3: SCSIStatus(x02) WinError(0) NeroError(-1064)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x21
Sense Qual: 0x02
CDB Data: 0x2A 00 00 00 00 20 00 00 20 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 21 02
Buffer x190c0080: Len x10000
0x01 00 02 00 C9 00 00 00 FD B8 F0 01 20 00 00 00
0x00 00 00 00 00 00 00 00 08 54 68 65 20 43 68 72
0x6F 6E 69 63 6C 65 73 20 00 00 00 00 00 00 00 00
08:04:14 PM #40 CDR -1064 File Writer.cpp, Line 306
Invalid block address
F: SONY DVD RW DRU-720A
08:04:15 PM #41 Phase 127 File dlgbrnst.cpp, Line 1767
Generating DVD high compatibility borders
08:04:15 PM #42 Text 0 File DVDPlusRW.cpp, Line 935
EndDAO: Last written address 32
08:04:15 PM #43 Phase 129 File dlgbrnst.cpp, Line 1767
Generating DVD borders completed successfully
08:04:16 PM #44 Text 0 File DVDR.cpp, Line 7133
Drive: SONY DVD RW DRU-720A
Book Type request [LO], rev 1: DVD-ROM
Changing the Book Type was finished successfully, return code 0
08:04:16 PM #45 Phase 38 File dlgbrnst.cpp, Line 1767
Burn process failed at 2.4x (3,324 KB/s)
08:04:16 PM #46 Text 0 File SCSIPTICommands.cpp, Line 287
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
08:04:18 PM #47 Text 0 File Cdrdrv.cpp, Line 11411
DriveLocker: UnLockVolume completed
08:04:18 PM #48 Text 0 File SCSIPTICommands.cpp, Line 450
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
your Friend,
Larry
|
|
Advertisement
|
|
|
|
AfterDawn Addict
|
24. November 2008 @ 06:39 |
Link to this message
|
99% of all problems are between the computer and the chair.
This message has been edited since posting. Last time this message was edited on 24. November 2008 @ 06:41
|
|
RGFindlay
Suspended due to non-functional email address
|
29. November 2008 @ 17:54 |
Link to this message
|
Nero seems to be identifying your recorder, so I'm not sure firmware update will solve...
I found Nero would not write to Ritek core discs in Dual Layer... Neither Data of Video...
I had some success burning video with Sony DVD Architect or using DVD Shrink (Ironically) with the Deep option enabled...
R.G.Findlay
|
|
leoliver
Junior Member
|
1. December 2008 @ 12:07 |
Link to this message
|
Quote:
I had some success burning video with Sony DVD Architect or using DVD Shrink (Ironically) with the Deep option enabled...
R.G. ,
After updating my firmware , I still had the same problem . You were right about that. The success's that you had, did you burn with Nero,
via the DVD Shrink option ?
your Friend,
Larry
|
AfterDawn Addict
1 product review
|
1. December 2008 @ 12:16 |
Link to this message
|
Try ImgBurn for burning DL. Better than Nero, it's free.
 Piss me off, and I Will ignore You! |
|
RGFindlay
Suspended due to non-functional email address
|
1. December 2008 @ 15:19 |
Link to this message
|
Yes, DVD Shrink was using Nero Engine...
Even the Sony DVD Architect was not Perfect tho... had to coaster it 'coz it didn't play on target player... Prison Break eps for a neighbour... Had to Shrink it to 4.38 in the end...
A lot of people recommend IMGBurn as well as our esteemed Cyprusrom, so I would only suggest the same if DL is needed...
I just work without for now, as the tech seems to be weak as yet...
R.G.Findlay
|
|
RGFindlay
Suspended due to non-functional email address
|
1. December 2008 @ 15:27 |
Link to this message
|
DVD Architect doesn't use Nero engine, tho...
Missed that, there...
Nero was Burning discs, just insufficient portability for target medium...
DVD Shrink gave higher portability, but still failed on target...
DVD Architect passed all tests here, but failed on target...
Had to Shrink and Burn Single Layer (With Nero)
Nero has served me well, and as it gives me more control and options for disc properties, it tends to be first choice...
I have never burned a true success on Dual Layer...
R.G.Findlay
|
AfterDawn Addict
1 product review
|
1. December 2008 @ 15:40 |
Link to this message
|
If you burn with Nero from DVD Shrink, or directly with Nero, you use the same burning engine, so it shouldn't make any difference.
For DL I'd use Verbatim discs and ImgBurn. And of course, have the firmware updated for your burner.
Quote:
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
That is a medium error, your burner(firmware) and the discs you are using don't get along.
Piss me off, and I Will ignore You!
|
Senior Member
|
1. December 2008 @ 15:55 |
Link to this message
|
Originally posted by RGFindlay:
I just work without for now, as the tech seems to be weak as yet...
I'm not sure if you mean DL discs or the programs to burn them as being weak. Price not performance is the reason people dont like DL discs, and I dont know of an easier, free program for perfect burns every time than IMGBurn.
99% of the time a DL burn doesnt work its the operators error of some sort. Either not setting up the files to burn properly and treating them as you would a single layer disc, not using the a burning program right, or using the cheapest of the cheap DL discs.
Follow CyprusRom on this.
EDIT=CyprusRom posted while I was typing and echoed my statements but pointed out facts instead of my generalities...
This message has been edited since posting. Last time this message was edited on 1. December 2008 @ 15:58
|
|
RGFindlay
Suspended due to non-functional email address
|
1. December 2008 @ 16:09 |
Link to this message
|
Between experience and what I've read here since joining the forum, I suspect it may be 'coz my recorders are too old...
Still haven't tried IMGBurn, but will along the way... I think some new drives should come first, and some decent discs...
the market was a bit limited here at the time, but now I have more options...
Thanx, guys...
R.G.Findlay
|
Senior Member
|
1. December 2008 @ 16:24 |
Link to this message
|
|
I totally understand your sentiments R.G.Findlay what works for some doesnt always work for others. I wasnt trying to have a rude tone, sorry if it sounded like that, and if you have questions about updating the things you mentioned and your other options dont hesitste to start a thread!
|
|
leoliver
Junior Member
|
2. December 2008 @ 11:32 |
Link to this message
|
Recently, I found out the hard-way , that there are 2-different kinds of Verbatim DL disc's . Check out this thread from the IMGBurn support forum.......
http://forum.imgburn.com/index.php?showtopic=8000
That lesson cost me about $19.00 !
Also, I recently purchased some Maxell single layer D+R disc's' from Walmart that burn disc's with errors on them such as the movie freezing up .
However, some Maxell single layer D+R disc's' that I purchased from Walgreen's work OK . Nero CD/DVD Speed test's "Disk Info" tells me that there isn't any difference between the two sets of disc's .
But the disk Color is different between the two sets of disc's !
I think from now on I'm just going to purchase the right kind of Verbatim disc's on-line . It seems to me that the quality of blank DVD medium is going down . I can't get by with cheap Maxell disc's anymore .
your Friend,
Larry
|
|
Advertisement
|
|
|
AfterDawn Addict
1 product review
|
2. December 2008 @ 11:56 |
Link to this message
|
|
I don't use any DL( I find them to be a waste of space and money). The single layer Verbatims I usually buy them at Office Max when they go on sale, 50pack for $12 or so.
I have used Maxell in the past, X8, MAXELL-002-00 and RITEK-R03-02. I've had no problems with either. What do your discs ID as? Might be made by CMC.Mag.
Piss me off, and I Will ignore You!
|
|
