|
|
|
Common denominator - burning problem?
|
|
|
LJemima
Newbie
|
11. February 2009 @ 15:27 |
Link to this message
|
I tried burning an MPEG file to a disc this morning. Not knowing what I was doing (to an extent) I tried a few different options, etc. All four times it failed to burn. Can someone take a quick peek at the logs and tell me what my issue is?
Alissa
Windows XP 5.1
IA32
WinAspi: -
NT-SPTI used
Nero Version: 7.10.1.0
Internal Version: 7, 10, 1, 0
Recorder: <TSSTcorp CD/DVDW TS-H552B>Version: GA04 - HA 1 TA 0 - 7.10.1.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <TSSTcorp CD/DVDW TS-H552B>Version: GA04 - HA 1 TA 0 - 7.10.1.0
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD3200BB-22KEA0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : TSSTcorp CD/DVDW TS-H552B atapi Port 3 ID 0 DMA: Off
=== CDRom-Device-Map ===
TSSTcorp CD/DVDW TS-H552B E: CdRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1918MB (1964520kB)
Free physical memory: 1218MB (1247632kB)
Memory in use : 36 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
10.2.2009
UDF compilation
6:52:57 PM #1 Text 0 File SCSIPTICommands.cpp, Line 424
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
6:52:57 PM #2 Text 0 File Isodoc.cpp, Line 6666
UDF document burn settings
------------------------------------------
Determine maximum speed : TRUE
Simulate : TRUE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
UDF Mode : pure
UDF Options : automatic
UDF Revision : 1.02
UDF Partition Type : physical
6:52:57 PM #3 Text 0 File Burncd.cpp, Line 3508
Turn on Disc-At-Once, using DVD media
6:52:58 PM #4 Text 0 File DlgWaitCD.cpp, Line 307
Last possible write address on media: 2297887 (510:38.37, 4488MB)
Last address to be written: 1944207 (432:02.57, 3797MB)
6:52:58 PM #5 Text 0 File DlgWaitCD.cpp, Line 319
Write in overburning mode: NO (enabled: CD)
6:52:58 PM #6 Text 0 File DlgWaitCD.cpp, Line 2972
Recorder: TSSTcorp CD/DVDW TS-H552B, Media type: DVD-R
Disc Manufacturer: CMC MA - G. AM3
Disc Application Code: 64, Disc Physical Code: 193
6:52:58 PM #7 Text 0 File DlgWaitCD.cpp, Line 493
>>> Protocol of DlgWaitCD activities: <<<
=========================================
6:52:58 PM #8 Text 0 File ThreadedTransferInterface.cpp, Line 793
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1944208 (1944208) = #1944208/432:2.58
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1944208 blocks [E: TSSTcorp CD/DVDW TS-H552B]
--------------------------------------------------------------
6:53:09 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 995
Prepare [E: TSSTcorp CD/DVDW TS-H552B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3981737984, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 1944208 | 0 | 0x00
1944208 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
6:53:09 PM #10 Text 0 File SCSIPTICommands.cpp, Line 215
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME
6:53:09 PM #11 Text 0 File Burncd.cpp, Line 4294
Caching options: cache CDRom or Network-Yes, small files-No (<64KB)
6:53:09 PM #12 Phase 24 File dlgbrnst.cpp, Line 1762
Caching of files started
6:53:09 PM #13 Text 0 File Burncd.cpp, Line 4413
Cache writing successful.
6:53:09 PM #14 Phase 25 File dlgbrnst.cpp, Line 1762
Caching of files completed
6:53:09 PM #15 Phase 28 File dlgbrnst.cpp, Line 1762
Speed measurement started
6:53:09 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2721
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
6:53:09 PM #17 Text 0 File ThreadedTransfer.cpp, Line 269
Pipe memory size 590400
6:54:55 PM #18 Text 0 File WriterStatus.cpp, Line 113
<E: TSSTcorp CD/DVDW TS-H552B> start writing Lead-Out at LBA 1944208 (1DAA90h), length 0 blocks
6:54:55 PM #19 Phase 29 File dlgbrnst.cpp, Line 1711
Speed measurement completed: 26.5x (36,590 KB/s)
6:54:55 PM #20 Phase 32 File dlgbrnst.cpp, Line 1762
Simulation started at 12x (16,620 KB/s)
6:54:55 PM #21 Text 0 File ThreadedTransferInterface.cpp, Line 2721
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
6:54:55 PM #22 Text 0 File DVDR.cpp, Line 3225
Recording mode: Sequential Recording Mode for Multisession
6:54:55 PM #23 Text 0 File DVDR.cpp, Line 3381
Start write address at LBA 0
DVD high compatibility mode: Yes
6:54:55 PM #24 SPTI -1066 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAC 00 00 00 00 00 00 00 00 64 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24
Buffer x091f5600: Len x648
6:54:55 PM #25 Text 0 File Cdrdrv.cpp, Line 9872
---- Disc Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Revision number of maximum recording speed: 6.0
Revision number of minimum recording speed: -
Revision number table of recording speed: 1.0 2.0 3.0 4.0 5.0 - -
Class: 0
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
6:54:55 PM #26 Text 0 File ThreadedTransfer.cpp, Line 269
Pipe memory size 83836800
6:55:01 PM #27 Text 0 File Cdrdrv.cpp, Line 1352
18:55:01.921 - E: TSSTcorp CD/DVDW TS-H552B : Queue again later
7:05:07 PM #28 SPTI -600 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x00) WinError(121) NeroError(-600)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x2A 00 00 00 06 E0 00 00 20 00 00 00
Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00
Buffer x09ba0e00: Len x10000
0x00 00 01 BA 44 00 5D 0B 4C 01 01 89 C3 F8 00 00
0x01 C0 07 EC 80 80 06 21 00 17 86 51 FF 5B 16 C5
0xB1 6C 77 77 77 5B 16 C7 CF 9A D7 EF DF BF 7E FD
7:05:07 PM #29 CDR -600 File Writer.cpp, Line 303
Device not available
E: TSSTcorp CD/DVDW TS-H552B
7:05:08 PM #30 Phase 133 File dlgbrnst.cpp, Line 1762
Writing short lead-out
7:17:09 PM #31 Text 0 File DVDR.cpp, Line 3783
EndDAO: Last written address was 1759 (6DFh)Close track 1, ret: 0
Close Session/Border, function 2, track: 3, finalize disc: NO, ret: 0
7:17:09 PM #32 CDR -1114 File WriterStatus.cpp, Line 162
Reset occurred
E: TSSTcorp CD/DVDW TS-H552B
7:17:09 PM #33 TRANSFER -24 File WriterStatus.cpp, Line 162
Could not perform end of Disc-at-once
7:17:37 PM #34 Phase 34 File dlgbrnst.cpp, Line 1762
Simulation failed at 12x (16,620 KB/s)
7:17:39 PM #35 Text 0 File SCSIPTICommands.cpp, Line 261
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
7:17:42 PM #36 Text 0 File Cdrdrv.cpp, Line 11185
DriveLocker: UnLockVolume completed
7:17:42 PM #37 Text 0 File SCSIPTICommands.cpp, Line 424
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Alissa
Windows XP 5.1
IA32
WinAspi: -
NT-SPTI used
Nero Version: 7.10.1.0
Internal Version: 7, 10, 1, 0
Recorder: <TSSTcorp CD/DVDW TS-H552B>Version: GA04 - HA 1 TA 0 - 7.10.1.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <TSSTcorp CD/DVDW TS-H552B>Version: GA04 - HA 1 TA 0 - 7.10.1.0
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD3200BB-22KEA0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : TSSTcorp CD/DVDW TS-H552B atapi Port 3 ID 0 DMA: Off
=== CDRom-Device-Map ===
TSSTcorp CD/DVDW TS-H552B E: CdRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1918MB (1964520kB)
Free physical memory: 1250MB (1280848kB)
Memory in use : 34 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
10.2.2009
UDF compilation
7:24:08 PM #1 Text 0 File SCSIPTICommands.cpp, Line 424
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
7:24:08 PM #2 Text 0 File Isodoc.cpp, Line 6666
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : TRUE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
UDF Mode : pure
UDF Options : automatic
UDF Revision : 1.02
UDF Partition Type : physical
7:24:09 PM #3 Text 0 File Burncd.cpp, Line 3508
Turn on Disc-At-Once, using DVD media
7:24:09 PM #4 Text 0 File DlgWaitCD.cpp, Line 307
Last possible write address on media: 2297887 (510:38.37, 4488MB)
Last address to be written: 1944207 (432:02.57, 3797MB)
7:24:09 PM #5 Text 0 File DlgWaitCD.cpp, Line 319
Write in overburning mode: NO (enabled: CD)
7:24:09 PM #6 Text 0 File DlgWaitCD.cpp, Line 2972
Recorder: TSSTcorp CD/DVDW TS-H552B, Media type: DVD-R
Disc Manufacturer: CMC MA - G. AM3
Disc Application Code: 64, Disc Physical Code: 193
7:24:09 PM #7 Text 0 File DlgWaitCD.cpp, Line 493
>>> Protocol of DlgWaitCD activities: <<<
=========================================
7:24:09 PM #8 Text 0 File ThreadedTransferInterface.cpp, Line 793
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1944208 (1944208) = #1944208/432:2.58
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1944208 blocks [E: TSSTcorp CD/DVDW TS-H552B]
--------------------------------------------------------------
7:24:12 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 995
Prepare [E: TSSTcorp CD/DVDW TS-H552B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3981737984, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 1944208 | 0 | 0x00
1944208 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
7:24:12 PM #10 Text 0 File SCSIPTICommands.cpp, Line 215
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME
7:24:12 PM #11 Text 0 File Burncd.cpp, Line 4294
Caching options: cache CDRom or Network-Yes, small files-No (<64KB)
7:24:12 PM #12 Phase 24 File dlgbrnst.cpp, Line 1762
Caching of files started
7:24:12 PM #13 Text 0 File Burncd.cpp, Line 4413
Cache writing successful.
7:24:12 PM #14 Phase 25 File dlgbrnst.cpp, Line 1762
Caching of files completed
7:24:12 PM #15 Phase 32 File dlgbrnst.cpp, Line 1762
Simulation started at 12x (16,620 KB/s)
7:24:12 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2721
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
7:24:12 PM #17 Text 0 File DVDR.cpp, Line 3225
Recording mode: Sequential Recording Mode
7:24:12 PM #18 Text 0 File DVDR.cpp, Line 3381
Start write address at LBA 0
DVD high compatibility mode: Yes
7:24:12 PM #19 SPTI -1066 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAC 00 00 00 00 00 00 00 00 64 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24
Buffer x065b1040: Len x648
7:24:12 PM #20 Text 0 File Cdrdrv.cpp, Line 9872
---- Disc Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Revision number of maximum recording speed: 6.0
Revision number of minimum recording speed: -
Revision number table of recording speed: 1.0 2.0 3.0 4.0 5.0 - -
Class: 0
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
7:24:12 PM #21 Text 0 File ThreadedTransfer.cpp, Line 269
Pipe memory size 83836800
7:24:19 PM #22 Text 0 File Cdrdrv.cpp, Line 1352
19:24:19.453 - E: TSSTcorp CD/DVDW TS-H552B : Queue again later
7:34:27 PM #23 SPTI -600 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x00) WinError(121) NeroError(-600)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x2A 00 00 00 06 80 00 00 20 00 00 00
Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00
Buffer x098e0d40: Len x10000
0x00 00 01 BA 44 00 56 4B 2C 01 01 89 C3 F8 00 00
0x01 E0 07 EC 80 00 01 FF 01 14 1A B0 4A FA C1 AF
0xAC 6B 00 00 01 15 1B 7D 7B EB 04 EF AD DF 58 2C
7:34:27 PM #24 CDR -600 File Writer.cpp, Line 303
Device not available
E: TSSTcorp CD/DVDW TS-H552B
7:34:27 PM #25 Text 0 File DVDR.cpp, Line 3783
EndDAO: Last written address was 1663 (67Fh)
7:34:27 PM #26 CDR -1114 File WriterStatus.cpp, Line 162
Reset occurred
E: TSSTcorp CD/DVDW TS-H552B
7:34:27 PM #27 TRANSFER -24 File WriterStatus.cpp, Line 162
Could not perform end of Disc-at-once
7:34:27 PM #28 Phase 34 File dlgbrnst.cpp, Line 1762
Simulation failed at 12x (16,620 KB/s)
7:34:28 PM #29 Text 0 File SCSIPTICommands.cpp, Line 261
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
7:34:32 PM #30 Text 0 File Cdrdrv.cpp, Line 11185
DriveLocker: UnLockVolume completed
7:34:32 PM #31 Text 0 File SCSIPTICommands.cpp, Line 424
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Alissa
Windows XP 5.1
IA32
WinAspi: -
NT-SPTI used
Nero Version: 7.10.1.0
Internal Version: 7, 10, 1, 0
Recorder: <TSSTcorp CD/DVDW TS-H552B>Version: GA04 - HA 1 TA 0 - 7.10.1.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <TSSTcorp CD/DVDW TS-H552B>Version: GA04 - HA 1 TA 0 - 7.10.1.0
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD3200BB-22KEA0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : TSSTcorp CD/DVDW TS-H552B atapi Port 3 ID 0 DMA: Off
=== CDRom-Device-Map ===
TSSTcorp CD/DVDW TS-H552B E: CdRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1918MB (1964520kB)
Free physical memory: 1278MB (1308704kB)
Memory in use : 33 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
10.2.2009
UDF compilation
7:41:56 PM #1 Text 0 File SCSIPTICommands.cpp, Line 424
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
7:41:56 PM #2 Text 0 File Isodoc.cpp, Line 6666
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : TRUE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : pure
UDF Options : automatic
UDF Revision : 1.02
UDF Partition Type : physical
7:41:56 PM #3 Text 0 File Burncd.cpp, Line 3508
Turn on Disc-At-Once, using DVD media
7:41:56 PM #4 Text 0 File DlgWaitCD.cpp, Line 307
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1944207 (432:02.57, 3797MB)
7:41:56 PM #5 Text 0 File DlgWaitCD.cpp, Line 319
Write in overburning mode: NO (enabled: CD)
7:41:56 PM #6 Text 0 File DlgWaitCD.cpp, Line 2972
Recorder: TSSTcorp CD/DVDW TS-H552B, Media type: DVD-R
Disc Manufacturer: CMC MA - G. AM3
Disc Application Code: 64, Disc Physical Code: 193
7:41:56 PM #7 Text 0 File DlgWaitCD.cpp, Line 493
>>> Protocol of DlgWaitCD activities: <<<
=========================================
7:41:56 PM #8 Text 0 File ThreadedTransferInterface.cpp, Line 793
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1944208 (1944208) = #1944208/432:2.58
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1944208 blocks [E: TSSTcorp CD/DVDW TS-H552B]
--------------------------------------------------------------
7:41:56 PM #9 Text 0 File Burncd.cpp, Line 4113
Can only write at 16,620 KB/s instead of 22,160 KB/s to current disc.
7:41:56 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 995
Prepare [E: TSSTcorp CD/DVDW TS-H552B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3981737984, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 1944208 | 0 | 0x00
1944208 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
7:41:56 PM #11 Text 0 File SCSIPTICommands.cpp, Line 215
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME
7:41:56 PM #12 Text 0 File Burncd.cpp, Line 4294
Caching options: cache CDRom or Network-Yes, small files-No (<64KB)
7:41:56 PM #13 Phase 24 File dlgbrnst.cpp, Line 1762
Caching of files started
7:41:56 PM #14 Text 0 File Burncd.cpp, Line 4413
Cache writing successful.
7:41:56 PM #15 Phase 25 File dlgbrnst.cpp, Line 1762
Caching of files completed
7:41:56 PM #16 Phase 32 File dlgbrnst.cpp, Line 1762
Simulation started at 12x (16,620 KB/s)
7:41:56 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2721
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
7:41:56 PM #18 Text 0 File DVDR.cpp, Line 3225
Recording mode: Sequential Recording Mode
7:41:56 PM #19 Text 0 File DVDR.cpp, Line 3381
Start write address at LBA 0
DVD high compatibility mode: Yes
7:41:56 PM #20 SPTI -1066 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAC 00 00 00 00 00 00 00 00 64 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24
Buffer x065b1040: Len x648
7:41:56 PM #21 Text 0 File Cdrdrv.cpp, Line 9872
---- Disc Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Revision number of maximum recording speed: 6.0
Revision number of minimum recording speed: -
Revision number table of recording speed: 1.0 2.0 3.0 4.0 5.0 - -
Class: 0
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
7:41:56 PM #22 Text 0 File ThreadedTransfer.cpp, Line 269
Pipe memory size 83836800
7:42:03 PM #23 Text 0 File Cdrdrv.cpp, Line 1352
19:42:03.968 - E: TSSTcorp CD/DVDW TS-H552B : Queue again later
7:48:56 PM #24 SPTI -1135 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 00 00 00 06 80 00 00 20 00 00 00
Sense Area: 0x71 00 03 00 00 00 00 0A 00 00 00 00 0C
Buffer x098e0d40: Len x10000
0x00 00 01 BA 44 00 56 4F BC 01 01 89 C3 F8 00 00
0x01 E0 07 EC 80 00 01 FF 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
7:48:56 PM #25 CDR -1135 File Writer.cpp, Line 303
Write error
E: TSSTcorp CD/DVDW TS-H552B
7:48:56 PM #26 Text 0 File DVDR.cpp, Line 3783
EndDAO: Last written address was 1663 (67Fh)
7:48:56 PM #27 Phase 34 File dlgbrnst.cpp, Line 1762
Simulation failed at 12x (16,620 KB/s)
7:48:57 PM #28 Text 0 File SCSIPTICommands.cpp, Line 261
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
7:48:59 PM #29 Text 0 File Cdrdrv.cpp, Line 11185
DriveLocker: UnLockVolume completed
7:48:59 PM #30 Text 0 File SCSIPTICommands.cpp, Line 424
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) \\
Alissa
Windows XP 5.1
IA32
WinAspi: -
NT-SPTI used
Nero Version: 7.10.1.0
Internal Version: 7, 10, 1, 0
Recorder: <TSSTcorp CD/DVDW TS-H552B>Version: GA04 - HA 1 TA 0 - 7.10.1.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <TSSTcorp CD/DVDW TS-H552B>Version: GA04 - HA 1 TA 0 - 7.10.1.0
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD3200BB-22KEA0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : TSSTcorp CD/DVDW TS-H552B atapi Port 3 ID 0 DMA: Off
=== CDRom-Device-Map ===
TSSTcorp CD/DVDW TS-H552B E: CdRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1918MB (1964520kB)
Free physical memory: 1275MB (1305788kB)
Memory in use : 33 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
10.2.2009
UDF compilation
8:02:44 PM #1 Text 0 File SCSIPTICommands.cpp, Line 424
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
8:02:44 PM #2 Text 0 File Isodoc.cpp, Line 6666
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : TRUE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : pure
UDF Options : automatic
UDF Revision : 1.02
UDF Partition Type : physical
8:02:44 PM #3 Text 0 File Burncd.cpp, Line 3508
Turn on Disc-At-Once, using DVD media
8:03:07 PM #4 Text 0 File DlgWaitCD.cpp, Line 307
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1944207 (432:02.57, 3797MB)
8:03:07 PM #5 Text 0 File DlgWaitCD.cpp, Line 319
Write in overburning mode: NO (enabled: CD)
8:03:07 PM #6 Text 0 File DlgWaitCD.cpp, Line 2972
Recorder: TSSTcorp CD/DVDW TS-H552B, Media type: DVD-R
Disc Manufacturer: CMC MA - G. AM3
Disc Application Code: 64, Disc Physical Code: 193
8:03:07 PM #7 Text 0 File DlgWaitCD.cpp, Line 493
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: Unknown. Medium required by compilation: DVD R/RW, DVD+R DL.)
8:03:07 PM #8 Text 0 File ThreadedTransferInterface.cpp, Line 793
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1944208 (1944208) = #1944208/432:2.58
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1944208 blocks [E: TSSTcorp CD/DVDW TS-H552B]
--------------------------------------------------------------
8:03:07 PM #9 Text 0 File Burncd.cpp, Line 4113
Can only write at 16,620 KB/s instead of 22,160 KB/s to current disc.
8:03:07 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 995
Prepare [E: TSSTcorp CD/DVDW TS-H552B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3981737984, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 1944208 | 0 | 0x00
1944208 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
8:03:07 PM #11 Text 0 File SCSIPTICommands.cpp, Line 215
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME
8:03:07 PM #12 Text 0 File Burncd.cpp, Line 4294
Caching options: cache CDRom or Network-Yes, small files-No (<64KB)
8:03:07 PM #13 Phase 24 File dlgbrnst.cpp, Line 1762
Caching of files started
8:03:07 PM #14 Text 0 File Burncd.cpp, Line 4413
Cache writing successful.
8:03:07 PM #15 Phase 25 File dlgbrnst.cpp, Line 1762
Caching of files completed
8:03:07 PM #16 Phase 32 File dlgbrnst.cpp, Line 1762
Simulation started at 12x (16,620 KB/s)
8:03:07 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2721
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
8:03:07 PM #18 Text 0 File DVDR.cpp, Line 3225
Recording mode: Sequential Recording Mode
8:03:07 PM #19 Text 0 File DVDR.cpp, Line 3381
Start write address at LBA 0
DVD high compatibility mode: Yes
8:03:07 PM #20 SPTI -1066 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAC 00 00 00 00 00 00 00 00 64 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24
Buffer x065b1040: Len x648
8:03:07 PM #21 Text 0 File Cdrdrv.cpp, Line 9872
---- Disc Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Revision number of maximum recording speed: 6.0
Revision number of minimum recording speed: -
Revision number table of recording speed: 1.0 2.0 3.0 4.0 5.0 - -
Class: 0
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
8:03:07 PM #22 Text 0 File ThreadedTransfer.cpp, Line 269
Pipe memory size 83836800
8:03:14 PM #23 Text 0 File Cdrdrv.cpp, Line 1352
20:03:14.468 - E: TSSTcorp CD/DVDW TS-H552B : Queue again later
8:13:15 PM #24 SPTI -1135 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 00 00 00 06 80 00 00 20 00 00 00
Sense Area: 0x71 00 03 00 00 00 00 0A 00 00 00 00 0C
Buffer x098e0d40: Len x10000
0x00 00 01 BA 44 00 56 4F BC 01 01 89 C3 F8 00 00
0x01 E0 07 EC 80 00 01 FF 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
8:13:15 PM #25 CDR -1135 File Writer.cpp, Line 303
Write error
E: TSSTcorp CD/DVDW TS-H552B
8:13:15 PM #26 Text 0 File DVDR.cpp, Line 3783
EndDAO: Last written address was 1663 (67Fh)
8:13:15 PM #27 Phase 34 File dlgbrnst.cpp, Line 1762
Simulation failed at 12x (16,620 KB/s)
8:13:16 PM #28 Text 0 File SCSIPTICommands.cpp, Line 261
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
8:13:18 PM #29 Text 0 File Cdrdrv.cpp, Line 11185
DriveLocker: UnLockVolume completed
8:13:18 PM #30 Text 0 File SCSIPTICommands.cpp, Line 424
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
This message has been edited since posting. Last time this message was edited on 12. February 2009 @ 10:10
|
|
Advertisement
|
|
|
|
AfterDawn Addict
|
11. February 2009 @ 16:14 |
Link to this message
|
Try changing your settings from this:
Simulate : TRUE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
To this:
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Update your firmware.
Turn on your DMA.
Get some good media and lower your burn speed on this aging burner.
99% of all problems are between the computer and the chair.
|
AfterDawn Addict
3 product reviews
|
11. February 2009 @ 17:01 |
Link to this message
|
|
|
LJemima
Newbie
|
12. February 2009 @ 10:17 |
Link to this message
|
Thank you for the advice (also for the tip to edit the serial #, which I did).
You say that my DVD burner is "aging". Would I be wise to purchase a newer one?
|
AfterDawn Addict
|
12. February 2009 @ 10:45 |
Link to this message
|
For now just fix your settings, DMA and firmware and try again.
99% of all problems are between the computer and the chair.
|
|
LJemima
Newbie
|
12. February 2009 @ 21:28 |
Link to this message
|
"Update your firmware."
Okay, you've lost me on this. What should I be downloading on the site? (I have a Windows XP if that helps? I assume this has nothing to do with my brand of DVD player. Sorry to be so dense).
"Turn on your DMA."
I looked at the tutorial 7thSinger linked to. My settings seem OK (it is not set at POI). Do I need to do something further?
"Get some good media"
Good to go in that arena, at least.
Thanks, appreciate the help.
|
AfterDawn Addict
3 product reviews
|
13. February 2009 @ 10:33 |
Link to this message
|
Originally posted by LJemima:
"Update your firmware."
Okay, you've lost me on this. What should I be downloading on the site? (I have a Windows XP if that helps? I assume this has nothing to do with my brand of DVD player. Sorry to be so dense).
From the glossary about firmware:
Sort of a "operating system of the hardware", an embedded instruction set built-in or flashed into a hardware equipment, such as a router, CDR drive, DVD-ROM drive, washing machine, etc.
So yes, it deals directly with your drive. Go to the firmware hq: http://www.firmwarehq.com/ and select the drive model that matches yours. Download the most recent firmware update.
Originally posted by LJemima:
"Turn on your DMA."
I looked at the tutorial 7thSinger linked to. My settings seem OK (it is not set at POI). Do I need to do something further?
I would still follow the instruction in that tutorial and uninstall then reboot as your burn log states that DMA is off.
Quote:
"Get some good media"
Good to go in that arena, at least.
If you're still using those CMC MAG's i would still advise getting Verbatim or Sony.
In short, update your firmware, reset your DMA, get some good blank media and try again. Post the log if you have additional trouble.
This message has been edited since posting. Last time this message was edited on 13. February 2009 @ 10:35
|
|
LJemima
Newbie
|
15. February 2009 @ 15:10 |
Link to this message
|
Successfully updated my firmware (thanks again).
Followed the tutorial to reinstall my DMA drivers, hit a small snag.
Primary uninstalled and re-installed automatically. Secondary did not re-install itself upon rebooting. I attempted to manually do it using Loco's link (rapidshare.com/files/14861593/resetdma.vbs.html) but was told "No resettable ATA channels found. Nothing changed."
But, there are no secondary drivers showing up.
Any help?
|
|
Advertisement
|
|
|
AfterDawn Addict
|
15. February 2009 @ 23:30 |
Link to this message
|
|
Have you at any time been inside your computer?
99% of all problems are between the computer and the chair.
|
|
