|
|
|
error msg invalid block or disc-at-once not working ,nero 7
|
|
|
cuddles4u
Junior Member
|
13. February 2009 @ 14:19 |
Link to this message
|
HI well i've read alot of your forums an i am still at a loss here> i was burning movies useing kodak R+ and nero smart start an they burned with no problem, Then i purchased memorex dvd+r/rw an ever since had nothing but problems It will either burn but not finalize an i get a msg about Disc-At-Once did not work or I get msg invalid block. I tried at that point to try burning it on dvd shrink an again same thing happened here is my log I hope you can help me out on this as i just bought 100 discs of these memorex .. thank you in advance
1C82-0010-8011-0000-6038-7867-7092
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM
NT-SPTI used
Nero API version: 7.0.1.2
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Nero\Nero 7\Core\
Application: ahead\Nero - Burning Rom
Internal Version: 7, 0, 1, 2
Recorder: <HL-DT-ST DVDRAM GSA-4167B>Version: DL13 - HA 1 TA 1 - 7.0.1.2
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y080L0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST CD-RW GCE-8526B atapi Port 1 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4167B atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
HL-DT-ST CD-RW GCE-8526B D: CDRom0
HL-DT-ST DVDRAM GSA-4167B E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 40894464 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 254MB (260592kB)
Free physical memory: 85MB (87168kB)
Memory in use : 66 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
13.2.2009
NeroAPI
12:38:07 PM #1 Phase 112 File APIProgress.cpp, Line 278
DVD-Video files reallocation started
12:38:07 PM #2 Phase 114 File APIProgress.cpp, Line 278
DVD-Video files reallocation completed (no file modified)
12:38:07 PM #3 Phase 111 File APIProgress.cpp, Line 278
DVD-Video files sorted
12:38:07 PM #4 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 39936KB of Memory
12:38:07 PM #5 Text 0 File Reader.cpp, Line 124
Reader running
12:38:07 PM #6 Text 0 File Writer.cpp, Line 113
Writer E: HL-DT-ST DVDRAM GSA-4167B running
12:38:07 PM #7 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.
12:38:07 PM #8 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
12:38:08 PM #9 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
12:38:08 PM #10 Text 0 File Burncd.cpp, Line 3302
Turn on Disc-At-Once, using DVD media
12:38:39 PM #11 Text 0 File DlgWaitCD.cpp, Line 279
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 1756607 (390:21.32, 3430MB)
12:38:39 PM #12 Text 0 File DlgWaitCD.cpp, Line 291
Write in overburning mode: NO
12:38:39 PM #13 Text 0 File DlgWaitCD.cpp, Line 2578
Recorder: HL-DT-ST DVDRAM GSA-4167B, Media type: DVD+R
Disc Manufacturer ID: CMC MAG, Media Type ID: M01, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 7
12:38:39 PM #14 Text 0 File DlgWaitCD.cpp, Line 458
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, ram.cfm" class="forum_link" target="_blank">DVD-RAM, DVD-R DL, DVD+R DL.)
12:38:39 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1756608 (1756608) = #1756608/390:21.33
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1756608 blocks [E: HL-DT-ST DVDRAM GSA-4167B]
--------------------------------------------------------------
12:38:39 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [E: HL-DT-ST DVDRAM GSA-4167B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3597533184, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1756608 | lead-out | 1 | 0x41 | 0x00
12:38:39 PM #17 Text 0 File SCSIPassThrough.cpp, Line 36
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
12:38:39 PM #18 Phase 24 File APIProgress.cpp, Line 278
Caching of files started
12:38:39 PM #19 Text 0 File Burncd.cpp, Line 4132
Cache writing successful.
12:38:39 PM #20 Phase 25 File APIProgress.cpp, Line 278
Caching of files completed
12:38:39 PM #21 Phase 36 File APIProgress.cpp, Line 278
Burn process started at 16x (22,160 KB/s)
12:38:39 PM #22 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
12:38:39 PM #23 Text 0 File Cdrdrv.cpp, Line 8411
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 7 h
Disc Manufacturer ID: CMC.MAG.
Media type ID: M01
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 07 43 4D 43 20 4D - 41 47 00 4D 30 31 00 38 ...CMC.MAG.M01.8
23 54 37 18 00 3E 6E 00 - 70 62 15 15 0B 0B 08 08 #T7..>n.pb......
01 19 1B 0B 0B 0E 0F 01 - 00 00 00 00 00 00 00 00 ................
12:38:39 PM #24 Text 0 File DVDR.cpp, Line 5400
Drive: HL-DT-ST DVDRAM GSA-4167B
Book Type request [LG]: DVD-ROM
Changing the Book Type was finished successfully, return code 0
12:38:39 PM #25 CDR -1211 File DVDR.cpp, Line 5321
Book Type set to: DVD-ROM
12:38:39 PM #26 Text 0 File DVDPlusRW.cpp, Line 666
Start write address at LBA 0
DVD high compatibility mode: Yes
12:39:00 PM #27 SPTI -1135 File SCSIPassThrough.cpp, Line 323
E: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1135)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x5C 00 00 00 00 00 00 00 0C 00 00 00
Sense Area: 0x71 00 03 00 00 00 00 10 35 2D 03 0E 0C
Buffer x0115ec00: Len xc
12:39:00 PM #28 SPTI -1064 File SCSIPassThrough.cpp, Line 323
E: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1064)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x21
Sense Qual: 0x02
CDB Data: 0x2A 00 00 00 00 20 00 00 20 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 10 2A 00 00 0E 21 02
Buffer x00ed0000: Len x10000
0x01 00 02 00 93 00 00 00 1A 65 F0 01 20 00 00 00
0x00 00 00 00 00 00 00 00 08 46 55 4E 41 49 5F 44
0x56 44 5F 56 49 44 45 4F 00 00 00 00 00 00 00 00
12:39:00 PM #29 CDR -1064 File Writer.cpp, Line 302
Invalid block address
E: HL-DT-ST DVDRAM GSA-4167B
12:39:00 PM #30 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
12:39:01 PM #31 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
12:39:27 PM #32 SPTI -1135 File SCSIPassThrough.cpp, Line 323
E: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1135)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x51 00 00 00 00 00 00 00 20 00 00 00
Sense Area: 0x71 00 03 00 00 00 00 10 35 2D 03 0E 0C
Buffer x0115a600: Len x20
12:39:27 PM #33 Phase 127 File APIProgress.cpp, Line 278
Generating DVD high compatibility borders
12:39:27 PM #34 Phase 129 File APIProgress.cpp, Line 278
Generating DVD borders completed successfully
12:39:27 PM #35 Phase 38 File APIProgress.cpp, Line 278
Burn process failed at 16x (22,160 KB/s)
12:39:27 PM #36 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.
12:39:27 PM #37 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.
Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
|
Advertisement
|
|
|
|
AfterDawn Addict
|
13. February 2009 @ 16:00 |
Link to this message
|
Quote:
Disc Manufacturer ID: CMC MAG
Quote:
Burn process failed at 16x
Either cut the burning speed back to 8x ~ 4x or try some (known reliable) 'Verbatim' brand disks.
|
|
cuddles4u
Junior Member
|
13. February 2009 @ 16:25 |
Link to this message
|
|
Thank you for your response i did cut back my burning to 4x an that allowed me to burn it but then it wouldnt finalize it and i got the msg bout disc at once not working ..an it wont play..
|
|
cuddles4u
Junior Member
|
13. February 2009 @ 17:02 |
Link to this message
|
here is the log from nero when i tried it at 4x
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM
NT-SPTI used
Nero Version: 7.0.1.2
Internal Version: 7, 0, 1, 2
(Nero Express)
Recorder: <HL-DT-ST DVDRAM GSA-4167B>Version: DL13 - HA 1 TA 1 - 7.0.1.2
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <HL-DT-ST DVDRAM GSA-4167B>Version: DL13 - HA 1 TA 1 - 7.0.1.2
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y080L0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST CD-RW GCE-8526B atapi Port 1 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4167B atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
HL-DT-ST CD-RW GCE-8526B D: CDRom0
HL-DT-ST DVDRAM GSA-4167B E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 40894464 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 254MB (260592kB)
Free physical memory: 118MB (120860kB)
Memory in use : 53 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
13.2.2009
===== Disc-Copy over image - 1st step : Copy to image ...
4:37:19 PM #1 Text 0 File SCSIPassThrough.cpp, Line 36
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
4:37:20 PM #2 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 192KB of Memory
4:37:20 PM #3 Text 0 File Reader.cpp, Line 124
Reader running
4:37:20 PM #4 Text 0 File Writer.cpp, Line 113
Writer Image Recorder running
4:37:20 PM #5 Text 0 File DVDCopy.cpp, Line 292
DVD Track-Information from source disc:
Media Type: DVD+R
S01 T01 Con 0x14 Start 0 Len 1772880 (gap 0) Blank 0 Res 1 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0)
4:37:20 PM #6 Text 0 File DVDCopy.cpp, Line 405
Max -1 tracks of 1 allowed to copy
1: 0 - 1772880 = 1772880, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)
4:37:20 PM #7 Text 0 File Burncd.cpp, Line 3302
Turn on Disc-At-Once, using DVD media
4:37:20 PM #8 Text 0 File DlgWaitCD.cpp, Line 279
Last possible write address on media: 4718591 (1048:34.41, 9215MB)
Last address to be written: 1772879 (393:58.29, 3462MB)
4:37:20 PM #9 Text 0 File DlgWaitCD.cpp, Line 291
Write in overburning mode: NO (enabled: CD)
4:37:20 PM #10 Text 0 File DlgWaitCD.cpp, Line 458
>>> Protocol of DlgWaitCD activities: <<<
=========================================
4:37:20 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - Data (mode 1))
2 indices, index0 (150) not provided
original disc pos #0 + 1772880 (1772880) = #1772880/393:58.30
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1772880 blocks [Image Recorder]
--------------------------------------------------------------
4:37:20 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [Image Recorder] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3630858240, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1772880 | lead-out | 1 | 0x41 | 0x00
4:37:20 PM #13 Phase 120 File dlgbrnst.cpp, Line 1725
Creating the image for burning
4:37:20 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
4:44:01 PM #15 Text 0 File WriterStatus.cpp, Line 116
<Image Recorder> start writing Lead-Out at LBA 1772880 (1B0D50h), length 0 blocks
4:44:01 PM #16 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
4:44:19 PM #17 Phase 121 File dlgbrnst.cpp, Line 1725
Creating Image completed successfully
===== Disc-Copy over image - 2nd step : Burn the image ...
4:44:51 PM #1 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 39936KB of Memory
4:44:51 PM #2 Text 0 File Reader.cpp, Line 124
Reader running
4:44:51 PM #3 Text 0 File Writer.cpp, Line 113
Writer E: HL-DT-ST DVDRAM GSA-4167B running
4:44:51 PM #4 IMAGEGEN -10 File ImageGen.cpp, Line 366
Image was written as DAO.
DAOI:
MediaCatalogNumber = ''
TocType = 0x40
Finalized = 1
First/Last Track = 1 / 1
1: ISRC = ''
Blocksize = 2048
TrackMode = 'TRM_DATA_MODE1'
TrackConfig = 0x00
First/Last Index = 0 / 1
Index0FilePos = 0, Index1FilePos = 0, NextTrackFilePos = 3630858240
CUES:
0: Ctrl=0x41 Trk= 0 (0x00) Index=00 Start=00:00.00 ( 0) RecDep=0x00
1: Ctrl=0x41 Trk= 1 (0x01) Index=00 Start=00:00.00 ( 0) RecDep=0x00
2: Ctrl=0x41 Trk= 1 (0x01) Index=01 Start=00:00.00 ( 0) RecDep=0x00
3: Ctrl=0x41 Trk=110 (0xAA) Index=01 Start=393:58.30 ( 1772880) RecDep=0x00
MTYP: Mediumtype = DVD (old format) (0x1C)
Image file name: <C:\Documents and Settings\Debbie\My Documents\TempImage.nrg>
4:44:53 PM #5 Text 0 File Burncd.cpp, Line 3302
Turn on Disc-At-Once, using DVD media
4:49:14 PM #6 Text 0 File DlgWaitCD.cpp, Line 279
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 1772879 (393:58.29, 3462MB)
4:49:14 PM #7 Text 0 File DlgWaitCD.cpp, Line 291
Write in overburning mode: NO (enabled: CD)
4:49:14 PM #8 Text 0 File DlgWaitCD.cpp, Line 2578
Recorder: HL-DT-ST DVDRAM GSA-4167B, Media type: DVD+R
Disc Manufacturer ID: CMC MAG, Media Type ID: M01, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 7
4:49:14 PM #9 Text 0 File DlgWaitCD.cpp, Line 458
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: Unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, ram.cfm" class="forum_link" target="_blank">DVD-RAM, DVD-R DL, DVD+R DL.)
4:49:14 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - DVD-ROM)
2 indices, index0 (150) not provided
original disc pos #0 + 1772880 (1772880) = #1772880/393:58.30
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1772880 blocks [E: HL-DT-ST DVDRAM GSA-4167B]
--------------------------------------------------------------
4:49:14 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [E: HL-DT-ST DVDRAM GSA-4167B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3630858240, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1772880 | lead-out | 1 | 0x41 | 0x00
4:49:14 PM #12 Text 0 File SCSIPassThrough.cpp, Line 36
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
4:49:14 PM #13 Phase 36 File dlgbrnst.cpp, Line 1725
Burn process started at 4x (5,540 KB/s)
4:49:14 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
4:49:14 PM #15 Text 0 File Cdrdrv.cpp, Line 8411
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 7 h
Disc Manufacturer ID: CMC.MAG.
Media type ID: M01
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 07 43 4D 43 20 4D - 41 47 00 4D 30 31 00 38 ...CMC.MAG.M01.8
23 54 37 18 00 3E 6E 00 - 70 62 15 15 0B 0B 08 08 #T7..>n.pb......
01 19 1B 0B 0B 0E 0F 01 - 00 00 00 00 00 00 00 00 ................
4:49:14 PM #16 Text 0 File DVDR.cpp, Line 5400
Drive: HL-DT-ST DVDRAM GSA-4167B
Book Type request [LG]: DVD-ROM
Changing the Book Type was finished successfully, return code 0
4:49:14 PM #17 CDR -1207 File DVDR.cpp, Line 5330
Book Type automatically set to: DVD-ROM
4:49:14 PM #18 Text 0 File DVDPlusRW.cpp, Line 666
Start write address at LBA 0
DVD high compatibility mode: Yes
4:49:42 PM #19 SPTI -1039 File SCSIPassThrough.cpp, Line 323
E: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1039)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x09
Sense Qual: 0x01
CDB Data: 0x2A 00 00 00 02 20 00 00 20 00 00 00
Sense Area: 0x70 00 04 00 00 00 00 10 35 01 04 0E 09 01
Buffer x03460000: Len x10000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
4:49:42 PM #20 CDR -1039 File Writer.cpp, Line 302
Focus or tracking error
E: HL-DT-ST DVDRAM GSA-4167B
4:49:42 PM #21 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
4:49:42 PM #22 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
4:49:42 PM #23 SPTI -1039 File SCSIPassThrough.cpp, Line 323
E: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1039)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x09
Sense Qual: 0x01
CDB Data: 0x35 02 00 00 00 00 00 00 00 00 00 00
Sense Area: 0x71 00 04 00 00 00 00 10 35 01 04 0E 09 01
4:49:42 PM #24 Phase 127 File dlgbrnst.cpp, Line 1725
Generating DVD high compatibility borders
4:50:27 PM #25 Phase 129 File dlgbrnst.cpp, Line 1725
Generating DVD borders completed successfully
4:50:27 PM #26 Phase 38 File dlgbrnst.cpp, Line 1725
Burn process failed at 4x (5,540 KB/s)
|
Senior Member
|
14. February 2009 @ 03:20 |
Link to this message
|
Both your logs have the same error like the wise Man "Women" attar said try some better disk's
Insert empty disc to write to.
(Medium in drive: unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, ram.cfm" class="forum_link" target="_blank">DVD-RAM, DVD-R DL, DVD+R DL.)
|
|
cuddles4u
Junior Member
|
14. February 2009 @ 07:58 |
Link to this message
|
|
ok thank you will do
|
|
cecil68
Newbie
|
28. February 2009 @ 08:29 |
Link to this message
|
I am having the same issue but I am using Kodak DVD+R disc 16x 4.7GB, are Kodak disc of an inferior quality? Also I have tried 2 different burners one is a HP DVD640 and the other is a Writemaster but unsure of model name but it is 16x as well. I have also tried cutting speed back to both 8x and 4x with no luck.
|
|
Advertisement
|
|
|
|
cuddles4u
Junior Member
|
28. February 2009 @ 08:56 |
Link to this message
|
|
i fixed mine I found out you cant transfer a 16x to a 4x if your burner only burns at a 4x rate .. so i bought disc that burn at 4x an fixed my problem
if your not sure look up your model on the net will give you the stats you can burn at good luck an thanks to all who helped me.
|
|
