|
|
|
Is my DVD burner dead? Session fixation error/end disc at once error
|
|
|
Taylor321
Newbie
|
19. February 2009 @ 00:01 |
Link to this message
|
I have an old NEC 1100A with the firmware update from Dell (where i got my computer from) 10GE.
I was going to try 1.A3 from http://www.firmwarehq.com/NEC/ND-1100/files.html but read that it is not for burners that came with a Dell computer.
I have tried TDK, Memorex, and Verbatim. All TDK failed, majority of the memorex disks failed and so far with 3 tries at Verbatim those have also failed. It will usually burn fine but get a session fixation error and an error in ending the disk at once.
I have tried a newer version of nero and an older version, same problems. Included is the log of a recent attempt.
Windows XP 5.1
IA32
WinAspi: -
NT-SPTI used
Nero Version: 7.10.1.0
Internal Version: 7, 10, 1, 0
Recorder: <_NEC DVD+RW ND-1100A> Version: 10GE - HA 1 TA 1 - 7.10.1.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <SAMSUNG CD-ROM SC-148A >Version: B403 - HA 1 TA 0 - 7.10.1.0
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 2F040L0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : IC35L060AVV207-0 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : SAMSUNG CD-ROM SC-148A atapi Port 1 ID 0 DMA: On
CdRomPeripheral : _NEC DVD+RW ND-1100A atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
SAMSUNG CD-ROM SC-148A D: CdRom0
_NEC DVD+RW ND-1100A F: CdRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 2039MB (2087936kB)
Free physical memory: 1597MB (1635668kB)
Memory in use : 21 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
18.2.2009
UDF/ISO compilation
5:17:56 PM #1 Text 0 File SCSIPTICommands.cpp, Line 424
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
5:17:57 PM #2 Phase 112 File dlgbrnst.cpp, Line 1762
DVD-Video files reallocation started
5:17:57 PM #3 Phase 114 File dlgbrnst.cpp, Line 1762
DVD-Video files reallocation completed (no file modified)
5:17:57 PM #4 Text 0 File Isodoc.cpp, Line 6666
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Options : automatic
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : FALSE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
5:17:57 PM #5 Phase 111 File dlgbrnst.cpp, Line 1762
DVD-Video files sorted
5:17:57 PM #6 ISO9660GEN -11 File Geniso.cpp, Line 3343
First writeable address = 0 (0x00000000)
5:17:57 PM #7 ISO9660GEN -11 File Geniso.cpp, Line 3343
First writeable address = 0 (0x00000000)
5:17:57 PM #8 Text 0 File Burncd.cpp, Line 3508
Turn on Disc-At-Once, using DVD media
5:17:58 PM #9 Text 0 File DlgWaitCD.cpp, Line 307
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2008511 (446:20.11, 3922MB)
5:17:58 PM #10 Text 0 File DlgWaitCD.cpp, Line 319
Write in overburning mode: NO (enabled: CD)
5:17:58 PM #11 Text 0 File DlgWaitCD.cpp, Line 2972
Recorder: _NEC DVD+RW ND-1100A, Media type: DVD+R
5:17:58 PM #12 Text 0 File DlgWaitCD.cpp, Line 493
>>> Protocol of DlgWaitCD activities: <<<
=========================================
5:17:58 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 793
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2008512 (2008512) = #2008512/446:20.12
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2008512 blocks [F: _NEC DVD+RW ND-1100A]
--------------------------------------------------------------
5:17:58 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 995
Prepare [F: _NEC DVD+RW ND-1100A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4113432576, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 2008512 | 0 | 0x00
2008512 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
5:17:58 PM #15 Text 0 File SCSIPTICommands.cpp, Line 215
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME
5:17:58 PM #16 Text 0 File Burncd.cpp, Line 4294
Caching options: cache CDRom or Network-Yes, small files-No (<64KB)
5:17:58 PM #17 Phase 24 File dlgbrnst.cpp, Line 1762
Caching of files started
5:17:58 PM #18 Text 0 File Burncd.cpp, Line 4413
Cache writing successful.
5:17:58 PM #19 Phase 25 File dlgbrnst.cpp, Line 1762
Caching of files completed
5:17:58 PM #20 Phase 36 File dlgbrnst.cpp, Line 1762
Burn process started at 2.4x (3,324 KB/s)
5:17:58 PM #21 Text 0 File ThreadedTransferInterface.cpp, Line 2721
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
5:17:58 PM #22 SPTI -1066 File SCSIPassThrough.cpp, Line 179
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 00 00 00 00 00 00 00 08 04 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24 00 00 C0 00 07
Buffer x088be300: Len x804
5:17:58 PM #23 SPTI -1065 File SCSIPassThrough.cpp, Line 179
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1065)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x20
Sense Qual: 0x00
CDB Data: 0xFA 10 00 00 00 00 00 00 06 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 20
Buffer x088f6c00: Len x6
5:17:58 PM #24 SPTI -1065 File SCSIPassThrough.cpp, Line 179
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1065)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x20
Sense Qual: 0x00
CDB Data: 0xFA 10 00 00 00 00 00 00 06 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 20
Buffer x088f6c00: Len x6
5:17:58 PM #25 Text 0 File DVDPlusRW.cpp, Line 675
Start write address at LBA 0
DVD high compatibility mode: Yes
5:17:58 PM #26 Text 0 File ThreadedTransfer.cpp, Line 269
Pipe memory size 83836800
5:38:31 PM #27 Text 0 File WriterStatus.cpp, Line 113
<F: _NEC DVD+RW ND-1100A> start writing Lead-Out at LBA 2008512 (1EA5C0h), length 0 blocks
5:38:40 PM #28 SPTI -1106 File SCSIPassThrough.cpp, Line 179
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1106)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
CDB Data: 0x5B 01 01 00 00 01 00 00 00 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 73 03
5:38:40 PM #29 SPTI -1176 File SCSIPassThrough.cpp, Line 179
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1176)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x72
Sense Qual: 0x03
CDB Data: 0x5B 01 06 00 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 72 03
5:38:40 PM #30 Text 0 File DVDPlusRW.cpp, Line 935
EndDAO: Last written address 2008512
5:38:40 PM #31 SPTI -1065 File SCSIPassThrough.cpp, Line 179
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1065)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x20
Sense Qual: 0x00
CDB Data: 0xFA 10 00 00 00 00 00 00 06 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 20
Buffer x088f6c00: Len x6
5:38:40 PM #32 SPTI -1065 File SCSIPassThrough.cpp, Line 179
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1065)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x20
Sense Qual: 0x00
CDB Data: 0xFA 10 00 00 00 00 00 00 06 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 20
Buffer x088f6c00: Len x6
5:38:40 PM #33 CDR -1176 File ThreadedTransferInterface.cpp, Line 1893
Session fixation error
F: _NEC DVD+RW ND-1100A
5:38:40 PM #34 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1893
Could not perform end of Disc-at-once
5:38:47 PM #35 SPTI -1106 File SCSIPassThrough.cpp, Line 179
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1106)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
CDB Data: 0x5B 01 01 00 00 01 00 00 00 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 73 03
5:38:47 PM #36 SPTI -1176 File SCSIPassThrough.cpp, Line 179
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1176)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x72
Sense Qual: 0x03
CDB Data: 0x5B 01 05 00 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 72 03
5:38:47 PM #37 Phase 127 File dlgbrnst.cpp, Line 1762
Generating DVD high compatibility borders
5:38:47 PM #38 Text 0 File DVDPlusRW.cpp, Line 935
EndDAO: Last written address 0
5:38:47 PM #39 SPTI -1065 File SCSIPassThrough.cpp, Line 179
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1065)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x20
Sense Qual: 0x00
CDB Data: 0xFA 10 00 00 00 00 00 00 06 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 20
Buffer x088f6c00: Len x6
5:38:48 PM #40 SPTI -1065 File SCSIPassThrough.cpp, Line 179
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1065)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x20
Sense Qual: 0x00
CDB Data: 0xFA 10 00 00 00 00 00 00 06 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 20
Buffer x088f6c00: Len x6
5:38:48 PM #41 CDR -1176 File WriterStatus.cpp, Line 162
Session fixation error
F: _NEC DVD+RW ND-1100A
5:38:48 PM #42 TRANSFER -24 File WriterStatus.cpp, Line 162
Could not perform end of Disc-at-once
5:38:48 PM #43 Phase 38 File dlgbrnst.cpp, Line 1762
Burn process failed at 2.4x (3,324 KB/s)
5:38:48 PM #44 Text 0 File SCSIPTICommands.cpp, Line 261
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
5:38:52 PM #45 Text 0 File Cdrdrv.cpp, Line 11185
DriveLocker: UnLockVolume completed
5:38:52 PM #46 Text 0 File SCSIPTICommands.cpp, Line 424
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
|
Advertisement
|
|
|
|
|
Taylor321
Newbie
|
19. February 2009 @ 00:17 |
Link to this message
|
also just attempted to copy a dvd and it wouldn't even start it spit my dvd+r back out
|
|
i_am_alex
Member
|
19. February 2009 @ 06:43 |
Link to this message
|
Sounds like you need to put the old firmware back on man.
|
|
Taylor321
Newbie
|
19. February 2009 @ 11:59 |
Link to this message
|
same prob happened with the old firmware, thats why i looked to find the new
my first burn after the new firmware actually worked. I had a pack of 15 maxell and maybe 5 of the 15 burned fine but one of those burns i used decryptor with an iso file or a single file of some sort.
Generally i burn the video_ts folder with nero
I checked my astp or whatever it is, the layers. That is telling me is fully functional and fine. I checked my ide's through device manager and they are how they should be. Even uninstalled my burner and restarted comp.
I've tried burning video_ts folders with dvdsanta and nero...both fail. I'm thinking my burner may be dying because i have verbatim and have tried everything just about that i've read so idk what the prob could be.
|
|
Taylor321
Newbie
|
19. February 2009 @ 12:56 |
Link to this message
|
|
i should also note that cds are being burned perfectly fine
|
|
Advertisement
|
|
|
|
Taylor321
Newbie
|
19. February 2009 @ 13:43 |
Link to this message
|
i just burned an img file with decryptor and it worked fine but then when i went to play it in my dvd player i get an error. This didn't happen with the tdk discs.
these verbatim discs were made in taiwan
|
|
