hi I wonder if i need a live card to ftp my old xbox. I ratter not get on the internet.because i dont need for it.I have unleashed x dashboard.and i want to download some http://www.emulator-zone.com/doc.php/snes/zsnes.html and some /http:/www.romnation.net/srv/roms.html and how do use them with vista
I don't recommend utilizing it's wireless capabilities to connect but of course that's your option.
You'll need a CAT5 cable for your xbox.
On your PC, go to start, run, and type in cmd
then at the command prompt type "ipconfig /all" (no quotes)
Write down the info you'll need. DNS, Gateway, Subnet Mask. I say get this because you should set up a static IP on your xbox for ease of later operations and you will need to input this info into your xbox's network settings. So, do that. Set up a static IP in the box and then input that info into Flash FXP for the connection setup.
If you want to use DHCP, just plug the CAT5 cable into your router, set the xbox for DHCP, restart it, load Flash FXP, input the current xbox ip settings info so you can connect to it and you should be good.
If you still have problems, make sure you disable the boost mode in your xbox's FTP settings, restart and try again.
I don't recommend utilizing it's wireless capabilities to connect but of course that's your option.
You'll need a CAT5 cable for your xbox.
On your PC, go to start, run, and type in cmd
then at the command prompt type "ipconfig /all" (no quotes)
Write down the info you'll need. DNS, Gateway, Subnet Mask. I say get this because you should set up a static IP on your xbox for ease of later operations and you will need to input this info into your xbox's network settings. So, do that. Set up a static IP in the box and then input that info into Flash FXP for the connection setup.
If you want to use DHCP, just plug the CAT5 cable into your router, set the xbox for DHCP, restart it, load Flash FXP, input the current xbox ip settings info so you can connect to it and you should be good.
If you still have problems, make sure you disable the boost mode in your xbox's FTP settings, restart and try again.
creat a folder called Emulators on your E/F drive and then put the emulators there. but first you must get the right programe to run the emulators for example u need the Surreal 64 to run N64 ROM.
also remeber that the ROM must be zip/rar.
1 put the Surreall 64 in E\emulators
2 put the ROMS in E\emulators\surreal 64\roms
casper007 do have to use cmd or is there a better way to ftp.my ps1 emulator say (loading) and freez.I have a ps1 emulator pcsxbox-1.5.i am try to get batman forever working and on top of batman itsaid d;/7
