|
|
|
Nero 9 on a reformatted computer
|
|
|
drktrx
Newbie
|
9. April 2009 @ 17:45 |
Link to this message
|
Here is the log for Nero 9 that I just put on my computer after a reformat. Thanks for the help!
------------
Windows XP 5.1
IA32
WinAspi: -
NT-SPTI used
Nero Version: 9.0.9.100
Internal Version: 9, 0, 9, 100
Recorder: <MATSHITA ram.cfm" class="forum_link" target="_blank">DVD-RAM UJ-841S>Version: 1.00 - HA 1 TA 0 - 9.0.9.100
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default
CD-ROM: <MATSHITA DVD-RAM UJ-841S >Version: 1.00 - HA 1 TA 0 - 9.0.9.100
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : HTS541010G9SA00 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : MATSHITA DVD-RAM UJ-841S atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
MATSHITA DVD-RAM UJ-841S D: CdRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1015MB (1039788kB)
Free physical memory: 487MB (499400kB)
Memory in use : 51 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
9.4.2009
UDF/ISO compilation
5:03:47 PM #1 Text 0 File SCSIPTICommands.cpp, Line 450
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
5:03:47 PM #2 Text 0 File Isodoc.cpp, Line 6789
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Options : automatic
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
5:03:47 PM #3 ISO9660GEN -11 File Geniso.cpp, Line 3349
First writeable address = 0 (0x00000000)
5:03:47 PM #4 ISO9660GEN -11 File Geniso.cpp, Line 3349
First writeable address = 0 (0x00000000)
5:03:48 PM #5 SPTI -1080 File SCSIPassThrough.cpp, Line 215
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1080)
CDB Data: 0x51 00 00 00 00 00 00 00 20 00 00 00
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x00
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 3A
Buffer x07338540: Len x20
5:03:48 PM #6 SPTI -1080 File SCSIPassThrough.cpp, Line 215
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1080)
CDB Data: 0x51 00 00 00 00 00 00 00 20 00 00 00
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x00
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 3A
Buffer x07338540: Len x20
5:03:48 PM #7 SPTI -1080 File SCSIPassThrough.cpp, Line 215
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1080)
CDB Data: 0x52 01 00 00 00 FF 00 00 20 00 00 00
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x00
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 3A
Buffer x07338540: Len x20
5:03:48 PM #8 SPTI -1080 File SCSIPassThrough.cpp, Line 215
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1080)
CDB Data: 0x51 00 00 00 00 00 00 00 20 00 00 00
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x00
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 3A
Buffer x07338540: Len x20
5:03:48 PM #9 SPTI -1080 File SCSIPassThrough.cpp, Line 215
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1080)
CDB Data: 0x52 01 00 00 00 FF 00 00 20 00 00 00
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x00
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 3A
Buffer x07338540: Len x20
5:03:48 PM #10 Text 0 File Burncd.cpp, Line 3563
Turn on Disc-At-Once, using DVD media
5:03:48 PM #11 SPTI -1080 File SCSIPassThrough.cpp, Line 215
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1080)
CDB Data: 0x51 00 00 00 00 00 00 00 20 00 00 00
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x00
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 3A
Buffer x07338540: Len x20
5:03:48 PM #12 SPTI -1080 File SCSIPassThrough.cpp, Line 215
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1080)
CDB Data: 0x51 00 00 00 00 00 00 00 20 00 00 00
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x00
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 3A
Buffer x07338540: Len x20
5:03:48 PM #13 SPTI -1080 File SCSIPassThrough.cpp, Line 215
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1080)
CDB Data: 0x52 01 00 00 00 FF 00 00 20 00 00 00
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x00
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 3A
Buffer x07338540: Len x20
5:03:48 PM #14 SPTI -1080 File SCSIPassThrough.cpp, Line 215
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1080)
CDB Data: 0x51 00 00 00 00 00 00 00 20 00 00 00
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x00
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 3A
Buffer x07338540: Len x20
5:03:48 PM #15 SPTI -1080 File SCSIPassThrough.cpp, Line 215
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1080)
CDB Data: 0x52 01 00 00 00 FF 00 00 20 00 00 00
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x00
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 3A
Buffer x07338540: Len x20
5:05:16 PM #16 Text 0 File FilesystemSettingsValidator.cpp, Line 142
FS Settings: using validator 'CUDFSettingsValidatorDVD'
ParamMode = 'automatic', changing UDF partition type from 'physical' to 'physical'
Changing UDF revision from '1.02' to '1.02'
5:05:16 PM #17 ISO9660GEN -11 File Geniso.cpp, Line 3349
First writeable address = 0 (0x00000000)
5:05:16 PM #18 ISO9660GEN -11 File Geniso.cpp, Line 3349
First writeable address = 0 (0x00000000)
5:05:16 PM #19 ISO9660GEN -11 File Geniso.cpp, Line 3349
First writeable address = 752 (0x000002F0)
5:05:16 PM #20 ISO9660GEN -11 File Geniso.cpp, Line 3349
First writeable address = 752 (0x000002F0)
5:05:16 PM #21 ISO9660GEN -11 File Geniso.cpp, Line 3349
First writeable address = 752 (0x000002F0)
5:05:16 PM #22 ISO9660GEN -11 File Geniso.cpp, Line 3349
First writeable address = 752 (0x000002F0)
5:06:08 PM #23 Text 0 File FilesystemSettingsValidator.cpp, Line 142
FS Settings: using validator 'CUDFSettingsValidatorDVD'
ParamMode = 'automatic', changing UDF partition type from 'physical' to 'physical'
Changing UDF revision from '1.02' to '1.02'
5:06:08 PM #24 ISO9660GEN -11 File Geniso.cpp, Line 3349
First writeable address = 752 (0x000002F0)
5:06:09 PM #25 ISO9660GEN -11 File Geniso.cpp, Line 3349
First writeable address = 752 (0x000002F0)
5:06:46 PM #26 Text 0 File FilesystemSettingsValidator.cpp, Line 142
FS Settings: using validator 'CUDFSettingsValidatorDVD'
ParamMode = 'automatic', changing UDF partition type from 'physical' to 'physical'
Changing UDF revision from '1.02' to '1.02'
5:06:46 PM #27 ISO9660GEN -11 File Geniso.cpp, Line 3349
First writeable address = 752 (0x000002F0)
5:06:46 PM #28 ISO9660GEN -11 File Geniso.cpp, Line 3349
First writeable address = 752 (0x000002F0)
5:06:46 PM #29 ISO9660GEN -11 File Geniso.cpp, Line 3349
First writeable address = 0 (0x00000000)
5:06:46 PM #30 ISO9660GEN -11 File Geniso.cpp, Line 3349
First writeable address = 0 (0x00000000)
5:06:46 PM #31 ISO9660GEN -11 File Geniso.cpp, Line 3349
First writeable address = 0 (0x00000000)
5:06:46 PM #32 ISO9660GEN -11 File Geniso.cpp, Line 3349
First writeable address = 0 (0x00000000)
5:06:48 PM #33 Text 0 File DlgWaitCD.cpp, Line 312
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 1036719 (230:22.69, 2024MB)
5:06:48 PM #34 Text 0 File DlgWaitCD.cpp, Line 324
Write in overburning mode: NO (enabled: CD)
5:06:48 PM #35 Text 0 File DlgWaitCD.cpp, Line 2951
Recorder: MATSHITA DVD-RAM UJ-841S, Media type: DVD+R
Disc Manufacturer ID: <RITEK>, Media Type ID: <F16>, Product revision number: 1
Disc Application Code: 0, Extended Information Indicators: 7
5:06:48 PM #36 Text 0 File DlgWaitCD.cpp, Line 499
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: Unknown. Medium required by compilation: DVD R/RW, DVD DL, DVD-RAM.)
Disc not empty. Insert empty disc.
(Medium in drive: DVD+R. Medium required by compilation: DVD R/RW, DVD DL, DVD-RAM.)
5:06:48 PM #37 Text 0 File ThreadedTransferInterface.cpp, Line 756
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1036720 (1036720) = #1036720/230:22.70
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1036720 blocks [D: MATSHITA DVD-RAM UJ-841S]
--------------------------------------------------------------
5:06:48 PM #38 Text 0 File ThreadedTransferInterface.cpp, Line 958
Prepare [D: MATSHITA DVD-RAM UJ-841S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 2123202560, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 1036720 | 0 | 0x00
1036720 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
5:06:48 PM #39 Text 0 File SCSIPTICommands.cpp, Line 240
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME
5:06:48 PM #40 Text 0 File Burncd.cpp, Line 4362
Caching options: cache CDRom or Network-Yes, small files-No (<64KB)
5:06:48 PM #41 Phase 24 File dlgbrnst.cpp, Line 1767
Caching of files started
5:06:48 PM #42 Text 0 File Burncd.cpp, Line 4484
Cache writing successful.
5:06:48 PM #43 Phase 25 File dlgbrnst.cpp, Line 1767
Caching of files completed
5:06:48 PM #44 Phase 36 File dlgbrnst.cpp, Line 1767
Burn process started at 2.4x (3,324 KB/s)
5:06:48 PM #45 Text 0 File ThreadedTransferInterface.cpp, Line 2675
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
5:06:48 PM #46 Text 0 File Cdrdrv.cpp, Line 10187
---- Disc Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Transfer Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 7 h
Disc Manufacturer ID: RITEK...
Media type ID: F16
Product revision number: 1
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..783]:
00 00 07 52 49 54 45 4B - 00 00 00 46 31 36 01 38 ...RITEK...F16.8
23 54 37 12 02 50 6E 02 - 8C 68 16 16 0B 0B 0A 0A #T7..Pn..h......
01 1D 1E 0C 0C 12 12 01 - 00 00 00 00 00 00 00 00 ................
01 00 38 38 02 2D 62 1E - 08 2E 23 10 04 1E 1D 01 ..88.-b...#.....
00 00 02 2D 62 1E 08 2E - 23 10 04 1E 1D 01 00 00 ...-b...#.......
02 00 54 70 02 38 64 24 - 30 18 10 10 01 20 00 00 ..Tp.8d$0.......
00 00 02 48 60 2A 30 18 - 10 10 01 20 00 00 00 28 ...H`*0........(
03 00 54 E0 02 41 64 24 - 30 18 10 10 01 28 00 00 ..T..Ad$0....(..
00 00 02 AF 5B 3E 30 18 - 10 10 01 28 00 00 00 5A ....[>0....(...Z
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
5:06:48 PM #47 Text 0 File DVDPlusRW.cpp, Line 675
Start write address at LBA 0
DVD high compatibility mode: No
5:06:48 PM #48 Text 0 File ThreadedTransfer.cpp, Line 273
Pipe memory size 83836800
5:07:17 PM #49 SPTI -1 File SCSIPassThrough.cpp, Line 215
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1)
CDB Data: 0x2A 00 00 00 05 E0 00 00 20 00 00 00
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x03
Sense Qual: 0x00
Sense Area: 0xF1 00 04 00 00 02 F0 0A 00 29 00 00 03
Buffer x09e30c00: Len x10000
0xC8 AE EF 43 AD 3F B2 D7 10 DF 7D FF FF F1 EB C5
0x1B C9 61 A3 2A 98 B0 01 85 87 24 E0 B1 60 80 2D
0x15 86 43 02 A1 8B 99 B4 7F 9B 66 0C C1 92 44 3F
5:07:17 PM #50 CDR -1 File Writer.cpp, Line 306
Unspecified Recorder Error
D: MATSHITA DVD-RAM UJ-841S
5:07:23 PM #51 SPTI -1 File SCSIPassThrough.cpp, Line 215
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1)
CDB Data: 0x00 00 00 00 00 00 00 00 00 00 00 00
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x03
Sense Qual: 0x00
Sense Area: 0x71 00 04 00 00 00 00 0A 00 29 00 00 03
5:07:23 PM #52 SPTI -1046 File SCSIPassThrough.cpp, Line 215
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1046)
CDB Data: 0x5B 01 02 00 00 00 00 00 00 00 00 00
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
Sense Area: 0x70 00 05 00 00 00 00 0A 00 82 00 00 30 05
5:07:23 PM #53 Text 0 File DVDPlusRW.cpp, Line 943
EndDAO: Last written address 1504
5:07:23 PM #54 CDR -1 File WriterStatus.cpp, Line 292
Unspecified Recorder Error
D: MATSHITA DVD-RAM UJ-841S
5:07:23 PM #55 TRANSFER -24 File WriterStatus.cpp, Line 292
Could not perform end of Disc-at-once
5:07:23 PM #56 Text 0 File DVDPlusDualLayer.cpp, Line 1424
SetDriveCaps: Set LAST LBA of layer 1 to 0
5:07:24 PM #57 Phase 38 File dlgbrnst.cpp, Line 1767
Burn process failed at 2.4x (3,324 KB/s)
5:07:24 PM #58 Text 0 File SCSIPTICommands.cpp, Line 287
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
5:07:27 PM #59 Text 0 File Cdrdrv.cpp, Line 11444
DriveLocker: UnLockVolume completed
5:07:27 PM #60 Text 0 File SCSIPTICommands.cpp, Line 450
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
|
grampyga
Member
|
9. April 2009 @ 23:40 |
Link to this message
|
There are updates for
Your burner?s firmware - 1.11
Nero 9 - 9.2.6
Burning speed 2.4x may not be good for your media.
Though you must have some hardware issues.
|
|
