|
|
|
Could not perform start of Disc-at-once / Invalid Field in command
|
|
|
Legoos
Newbie
|
18. April 2009 @ 07:42 |
Link to this message
|
I had problems here
I tried to burn DVD, but it doesn't work
This is Nero Log
Fábio Luiz
1C82-*Serial number removed by creaky*
Windows XP 5.1
IA32
WinAspi: -
NT-SPTI used
Nero Version: 7.10.1.0
Internal Version: 7, 10, 1, 0
(Nero Express)
Recorder: <HL-DT-ST DVDRAM GSA-H12N>Version: UL01 - HA 1 TA 0 - 7.10.1.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <HL-DT-ST DVDRAM GSA-H12N >Version: UL01 - HA 1 TA 0 - 7.10.1.0
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : ST320413A atapi Port 0 ID 0 DMA: On
DiskPeripheral : QUANTUM FIREBALLlct20 20 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GSA-H12N atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
HL-DT-ST DVDRAM GSA-H12N E: CdRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 40894464 (0) Byte
BUFE : 0
Physical memory : 255MB (261664kB)
Free physical memory: 38MB (39180kB)
Memory in use : 85 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
18.4.2009
ISO compilation
08:22:36 #1 Text 0 File SCSIPTICommands.cpp, Line 424
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
08:22:37 #2 Text 0 File Isodoc.cpp, Line 6666
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
08:22:37 #3 ISO9660GEN -11 File Geniso.cpp, Line 3343
First writeable address = 0 (0x00000000)
08:22:37 #4 Text 0 File Burncd.cpp, Line 3508
Turn on Disc-At-Once, using DVD media
08:23:15 #5 Text 0 File DlgWaitCD.cpp, Line 307
Last possible write address on media: 2190831 (486:51.06, 4278MB)
Last address to be written: 1198303 (266:17.28, 2340MB)
08:23:15 #6 Text 0 File DlgWaitCD.cpp, Line 319
Write in overburning mode: NO (enabled: CD)
08:23:15 #7 Text 0 File DlgWaitCD.cpp, Line 2972
Recorder: HL-DT-ST DVDRAM GSA-H12N, Media type: DVD-R
Disc Manufacturer: TYG02 -
Disc Application Code: 64, Disc Physical Code: 193
08:23:15 #8 Text 0 File DlgWaitCD.cpp, Line 493
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: Unknown. Medium required by compilation: DVD R/RW; DVD R DL; ram.cfm" class="forum_link" target="_blank">DVD-RAM.)
08:23:15 #9 Text 0 File ThreadedTransferInterface.cpp, Line 793
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1198304 (1198304) = #1198304/266:17.29
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1198304 blocks [E: HL-DT-ST DVDRAM GSA-H12N]
--------------------------------------------------------------
08:23:15 #10 Text 0 File ThreadedTransferInterface.cpp, Line 995
Prepare [E: HL-DT-ST DVDRAM GSA-H12N] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 2 to 2: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 2454126592, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 2 | 0 | 0x41 | 0 | 0 | 0x00
0 | 2 | 1 | 0x41 | 1198304 | 0 | 0x00
1198304 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
08:23:15 #11 Text 0 File SCSIPTICommands.cpp, Line 215
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME
08:23:15 #12 Text 0 File Burncd.cpp, Line 4294
Caching options: cache CDRom or Network-Yes, small files-Yes (<64KB)
08:23:15 #13 Phase 24 File dlgbrnst.cpp, Line 1762
Caching of files started
08:23:15 #14 Text 0 File Burncd.cpp, Line 4413
Cache writing successful.
08:23:15 #15 Phase 25 File dlgbrnst.cpp, Line 1762
Caching of files completed
08:23:15 #16 Phase 36 File dlgbrnst.cpp, Line 1762
Burn process started at 4x (5.540 KB/s)
08:23:15 #17 Text 0 File ThreadedTransferInterface.cpp, Line 2721
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
08:23:16 #18 Text 0 File DVDR.cpp, Line 3225
Recording mode: Sequential Recording Mode
08:23:16 #19 Text 0 File DVDR.cpp, Line 3381
Start write address at LBA 0
DVD high compatibility mode: Yes
08:23:16 #20 Text 0 File Cdrdrv.cpp, Line 9872
---- Disc Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Revision number of maximum recording speed: -
Revision number of minimum recording speed: -
Revision number table of recording speed: - - - - - - -
Class: 0
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
08:23:16 #21 SPTI -1066 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0x53 00 00 00 00 00 12 48 E0 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 10 53 00 00 0C 24 00 00 C0 00 05
08:23:16 #22 CDR -1066 File ThreadedTransferInterface.cpp, Line 1752
Invalid field in command
E: HL-DT-ST DVDRAM GSA-H12N
08:23:16 #23 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1752
Could not perform start of Disc-at-once
08:23:16 #24 Text 0 File ThreadedTransfer.cpp, Line 269
Pipe memory size 40868800
08:23:16 #25 Phase 38 File dlgbrnst.cpp, Line 1762
Burn process failed at 4x (5.540 KB/s)
08:23:16 #26 Text 0 File SCSIPTICommands.cpp, Line 261
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
08:23:22 #27 Text 0 File Cdrdrv.cpp, Line 11185
DriveLocker: UnLockVolume completed
08:23:22 #28 Text 0 File SCSIPTICommands.cpp, Line 424
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
This message has been edited since posting. Last time this message was edited on 19. April 2009 @ 08:49
|
AfterDawn Addict
|
18. April 2009 @ 09:42 |
Link to this message
|
99% of all problems are between the computer and the chair.
|
|
Legoos
Newbie
|
18. April 2009 @ 10:24 |
Link to this message
|
Quote:
Here's one problem:
Physical memory : 255MB (261664kB)
Free physical memory: 38MB (39180kB)
Memory in use : 85 %
Here's another:
Recorder: <HL-DT-ST DVDRAM GSA-H12N>Version: UL01
Update your firmware.
http://www.firmwarehq.com/LG/GSA-H12N/files.html
So, I update my firmware, but nothing has changed [Sorry for my bad english]
Here's the Log, again, can you see if something has changed?
My burner is broked?
Fábio Luiz
1C82-*Serial number removed by creaky*
Windows XP 5.1
IA32
WinAspi: -
NT-SPTI used
Nero Version: 7.10.1.0
Internal Version: 7, 10, 1, 0
(Nero Express)
Recorder: <HL-DT-ST DVDRAM GSA-H12N>Version: UL02 - HA 1 TA 0 - 7.10.1.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <HL-DT-ST DVDRAM GSA-H12N >Version: UL02 - HA 1 TA 0 - 7.10.1.0
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : ST320413A atapi Port 0 ID 0 DMA: On
DiskPeripheral : QUANTUM FIREBALLlct20 20 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GSA-H12N atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
HL-DT-ST DVDRAM GSA-H12N E: CdRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 40894464 (0) Byte
BUFE : 0
Physical memory : 255MB (261664kB)
Free physical memory: 57MB (58772kB)
Memory in use : 77 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
18.4.2009
UDF/ISO compilation
11:14:01 #1 Text 0 File SCSIPTICommands.cpp, Line 424
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
11:14:02 #2 Phase 112 File dlgbrnst.cpp, Line 1762
DVD-Video files reallocation started
11:14:02 #3 Phase 114 File dlgbrnst.cpp, Line 1762
DVD-Video files reallocation completed (no file modified)
11:14:02 #4 Text 0 File Isodoc.cpp, Line 6666
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Options : automatic
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
11:14:02 #5 Phase 111 File dlgbrnst.cpp, Line 1762
DVD-Video files sorted
11:14:02 #6 ISO9660GEN -11 File Geniso.cpp, Line 3343
First writeable address = 0 (0x00000000)
11:14:03 #7 ISO9660GEN -11 File Geniso.cpp, Line 3343
First writeable address = 0 (0x00000000)
11:14:03 #8 Text 0 File Burncd.cpp, Line 3508
Turn on Disc-At-Once, using DVD media
11:14:04 #9 Text 0 File DlgWaitCD.cpp, Line 307
Last possible write address on media: 2190831 (486:51.06, 4278MB)
Last address to be written: 2190831 (486:51.06, 4278MB)
11:14:04 #10 Text 0 File DlgWaitCD.cpp, Line 319
Write in overburning mode: NO (enabled: CD)
11:14:04 #11 Text 0 File DlgWaitCD.cpp, Line 2972
Recorder: HL-DT-ST DVDRAM GSA-H12N, Media type: DVD-R
Disc Manufacturer: TYG02 -
Disc Application Code: 64, Disc Physical Code: 193
11:14:04 #12 Text 0 File DlgWaitCD.cpp, Line 493
>>> Protocol of DlgWaitCD activities: <<<
=========================================
11:14:04 #13 Text 0 File ThreadedTransferInterface.cpp, Line 793
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2190832 (2190832) = #2190832/486:51.7
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2190832 blocks [E: HL-DT-ST DVDRAM GSA-H12N]
--------------------------------------------------------------
11:14:04 #14 Text 0 File ThreadedTransferInterface.cpp, Line 995
Prepare [E: HL-DT-ST DVDRAM GSA-H12N] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 2 to 2: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4486823936, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 2 | 0 | 0x41 | 0 | 0 | 0x00
0 | 2 | 1 | 0x41 | 2190832 | 0 | 0x00
2190832 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
11:14:04 #15 Text 0 File SCSIPTICommands.cpp, Line 215
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME
11:14:04 #16 Text 0 File Burncd.cpp, Line 4294
Caching options: cache CDRom or Network-Yes, small files-Yes (<64KB)
11:14:04 #17 Phase 24 File dlgbrnst.cpp, Line 1762
Caching of files started
11:14:04 #18 Text 0 File Burncd.cpp, Line 4413
Cache writing successful.
11:14:04 #19 Phase 25 File dlgbrnst.cpp, Line 1762
Caching of files completed
11:14:04 #20 Phase 36 File dlgbrnst.cpp, Line 1762
Burn process started at 4x (5.540 KB/s)
11:14:04 #21 Text 0 File ThreadedTransferInterface.cpp, Line 2721
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
11:14:04 #22 Text 0 File DVDR.cpp, Line 3225
Recording mode: Sequential Recording Mode
11:14:04 #23 Text 0 File DVDR.cpp, Line 3381
Start write address at LBA 0
DVD high compatibility mode: Yes
11:14:04 #24 Text 0 File Cdrdrv.cpp, Line 9872
---- Disc Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Revision number of maximum recording speed: -
Revision number of minimum recording speed: -
Revision number table of recording speed: - - - - - - -
Class: 0
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
11:14:04 #25 SPTI -1066 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0x53 00 00 00 00 00 21 6D F0 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 53 00 00 0C 24 00 00 C0 00 05
11:14:04 #26 CDR -1066 File ThreadedTransferInterface.cpp, Line 1752
Invalid field in command
E: HL-DT-ST DVDRAM GSA-H12N
11:14:04 #27 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1752
Could not perform start of Disc-at-once
11:14:05 #28 Text 0 File ThreadedTransfer.cpp, Line 269
Pipe memory size 40868800
11:14:05 #29 Phase 38 File dlgbrnst.cpp, Line 1762
Burn process failed at 4x (5.540 KB/s)
11:14:05 #30 Text 0 File SCSIPTICommands.cpp, Line 261
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
11:14:11 #31 Text 0 File Cdrdrv.cpp, Line 11185
DriveLocker: UnLockVolume completed
11:14:11 #32 Text 0 File SCSIPTICommands.cpp, Line 424
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
The same error, my burner is broked?
This message has been edited since posting. Last time this message was edited on 19. April 2009 @ 08:51
|
|
