|
|
|
Nero Help: Illegal Disk+Could Not Perform Disk-At-Once
|
|
|
Vavali
Newbie
|
18. April 2009 @ 18:28 |
Link to this message
|
Hey guys, hope someone can help me here after scouring the net trying to find the solution to what appears to be a universal problem.
Well, just like everyone else who has posted a thread like this, I have never had a problem before burning things with nero on this computer until a while back. Since then I have tried to update the firmware and drivers on my DVD Drive, but nothing seems to have helped. I've read suggestions about upgrading nero, and even defragging my hard drive, but again this hasn't helped the problem. I have the error logs from when I tried to burn from Nero 7 and also from Nero 8 now, but I'll post first the Nero 8 report unless someone needs to see the Nero 7 error log. Also, don't know if this has anything to do with it, but I have a HP DVD200i drive, but on my computer it is listed as 200j, for some reason. I don't know if anyone would know about that. Anyway, here's the report:
Windows XP 5.1
IA32
WinAspi: -
NT-SPTI used
Nero Version: 8.3.13.0
Internal Version: 8, 3, 13, 0
(Nero Express)
Recorder: <HP DVD Writer 200j> Version: 1.72 - HA 1 TA 0 - 8.3.13.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default
CD-ROM: <HP DVD Writer 200j >Version: 1.72 - HA 1 TA 0 - 8.3.13.0
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : ST320011A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HP DVD Writer 200j atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
HP DVD Writer 200j D: CdRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 767MB (785840kB)
Free physical memory: 425MB (435668kB)
Memory in use : 44 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
18.4.2009
ISO compilation
3:10:52 PM #1 Text 0 File SCSIPTICommands.cpp, Line 450
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
3:10:52 PM #2 Text 0 File Isodoc.cpp, Line 6714
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
3:10:52 PM #3 ISO9660GEN -11 File Geniso.cpp, Line 3349
First writeable address = 0 (0x00000000)
3:10:53 PM #4 SPTI -1080 File SCSIPassThrough.cpp, Line 214
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1080)
CDB Data: 0x51 00 00 00 00 00 00 00 20 00 00 00
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x00
Sense Area: 0x70 00 02 00 00 00 00 0C 00 00 00 00 3A
Buffer x02fe2600: Len x20
3:10:53 PM #5 SPTI -1080 File SCSIPassThrough.cpp, Line 214
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1080)
CDB Data: 0x51 00 00 00 00 00 00 00 20 00 00 00
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x00
Sense Area: 0x70 00 02 00 00 00 00 0C 00 00 00 00 3A
Buffer x02fe2600: Len x20
3:10:53 PM #6 SPTI -1080 File SCSIPassThrough.cpp, Line 214
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1080)
CDB Data: 0x52 01 00 00 00 FF 00 00 20 00 00 00
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x00
Sense Area: 0x70 00 02 00 00 00 00 0C 00 00 00 00 3A
Buffer x02fe2600: Len x20
3:10:53 PM #7 SPTI -1080 File SCSIPassThrough.cpp, Line 214
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1080)
CDB Data: 0x51 00 00 00 00 00 00 00 20 00 00 00
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x00
Sense Area: 0x70 00 02 00 00 00 00 0C 00 00 00 00 3A
Buffer x02fe2600: Len x20
3:10:53 PM #8 SPTI -1080 File SCSIPassThrough.cpp, Line 214
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1080)
CDB Data: 0x52 01 00 00 00 FF 00 00 20 00 00 00
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x00
Sense Area: 0x70 00 02 00 00 00 00 0C 00 00 00 00 3A
Buffer x02fe2600: Len x20
3:10:53 PM #9 Text 0 File Burncd.cpp, Line 3639
Turn on Disc-At-Once, using DVD media
3:10:54 PM #10 SPTI -1080 File SCSIPassThrough.cpp, Line 214
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1080)
CDB Data: 0x51 00 00 00 00 00 00 00 20 00 00 00
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x00
Sense Area: 0x70 00 02 00 00 00 00 0C 00 00 00 00 3A
Buffer x02fe2600: Len x20
3:10:54 PM #11 SPTI -1080 File SCSIPassThrough.cpp, Line 214
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1080)
CDB Data: 0x51 00 00 00 00 00 00 00 20 00 00 00
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x00
Sense Area: 0x70 00 02 00 00 00 00 0C 00 00 00 00 3A
Buffer x02fe2600: Len x20
3:10:54 PM #12 SPTI -1080 File SCSIPassThrough.cpp, Line 214
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1080)
CDB Data: 0x52 01 00 00 00 FF 00 00 20 00 00 00
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x00
Sense Area: 0x70 00 02 00 00 00 00 0C 00 00 00 00 3A
Buffer x02fe2600: Len x20
3:10:54 PM #13 SPTI -1080 File SCSIPassThrough.cpp, Line 214
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1080)
CDB Data: 0x51 00 00 00 00 00 00 00 20 00 00 00
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x00
Sense Area: 0x70 00 02 00 00 00 00 0C 00 00 00 00 3A
Buffer x02fe2600: Len x20
3:10:54 PM #14 SPTI -1080 File SCSIPassThrough.cpp, Line 214
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1080)
CDB Data: 0x52 01 00 00 00 FF 00 00 20 00 00 00
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x00
Sense Area: 0x70 00 02 00 00 00 00 0C 00 00 00 00 3A
Buffer x02fe2600: Len x20
3:11:07 PM #15 ISO9660GEN -11 File Geniso.cpp, Line 3349
First writeable address = 0 (0x00000000)
3:11:07 PM #16 Text 0 File FilesystemSettingsValidator.cpp, Line 142
FS Settings: using validator 'CUDFSettingsValidatorDVD'
ParamMode = 'automatic', changing UDF partition type from 'physical' to 'physical'
Changing UDF revision from '1.02' to '1.02'
3:11:09 PM #17 Text 0 File DlgWaitCD.cpp, Line 311
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 1772847 (393:57.72, 3462MB)
3:11:09 PM #18 Text 0 File DlgWaitCD.cpp, Line 323
Write in overburning mode: NO
3:11:09 PM #19 Text 0 File DlgWaitCD.cpp, Line 2946
Recorder: HP DVD Writer 200j, Media type: DVD+R
3:11:09 PM #20 Text 0 File DlgWaitCD.cpp, Line 497
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: Unknown. Medium required by compilation: DVD+R/RW.)
3:11:09 PM #21 Text 0 File ThreadedTransferInterface.cpp, Line 754
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1772848 (1772848) = #1772848/393:57.73
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1772848 blocks [D: HP DVD Writer 200j]
--------------------------------------------------------------
3:11:09 PM #22 Text 0 File ThreadedTransferInterface.cpp, Line 956
Prepare [D: HP DVD Writer 200j] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3630792704, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 1772848 | 0 | 0x00
1772848 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
3:11:09 PM #23 Text 0 File SCSIPTICommands.cpp, Line 240
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME
3:11:09 PM #24 Text 0 File Burncd.cpp, Line 4430
Caching options: cache CDRom or Network-Yes, small files-No (<64KB)
3:11:09 PM #25 Phase 24 File dlgbrnst.cpp, Line 1767
Caching of files started
3:11:09 PM #26 Text 0 File Burncd.cpp, Line 4552
Cache writing successful.
3:11:09 PM #27 Phase 25 File dlgbrnst.cpp, Line 1767
Caching of files completed
3:11:09 PM #28 Phase 36 File dlgbrnst.cpp, Line 1767
Burn process started at 2.4x (3,324 KB/s)
3:11:09 PM #29 Text 0 File ThreadedTransferInterface.cpp, Line 2673
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
3:11:09 PM #30 SPTI -1066 File SCSIPassThrough.cpp, Line 214
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
CDB Data: 0xAD 00 00 00 00 00 00 00 08 04 00 00
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
Sense Area: 0x70 00 05 00 00 00 00 0C 00 00 00 00 24
Buffer x05d030c0: Len x804
3:11:09 PM #31 SPTI -1066 File SCSIPassThrough.cpp, Line 214
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
CDB Data: 0xF9 15 01 FF 00 00 00 00 00 00 00 00
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
Sense Area: 0x70 00 05 00 00 00 00 0C 00 00 00 00 24
3:11:09 PM #32 Text 0 File DVDR.cpp, Line 7516
Drive: HP DVD Writer 200j
Book Type request [gen]: DVD-ROM, write to EEPROM
Changing the Book Type was finished successfully, return code 0
3:11:09 PM #33 CDR -1207 File DVDR.cpp, Line 6627
Book Type automatically set to: DVD-ROM
3:11:09 PM #34 Text 0 File DVDPlusRW.cpp, Line 675
Start write address at LBA 0
DVD high compatibility mode: No
3:11:09 PM #35 Text 0 File ThreadedTransfer.cpp, Line 269
Pipe memory size 83836800
3:11:43 PM #36 SPTI -1046 File SCSIPassThrough.cpp, Line 214
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1046)
CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
Sense Area: 0x70 00 05 00 00 00 00 0C 00 00 00 00 30 05
Buffer x060a0040: Len x10000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
3:11:43 PM #37 CDR -1046 File Writer.cpp, Line 306
Illegal disc
D: HP DVD Writer 200j
3:11:44 PM #38 SPTI -1066 File SCSIPassThrough.cpp, Line 214
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
CDB Data: 0x00 00 00 00 00 00 00 00 00 00 00 00
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
Sense Area: 0x71 00 05 00 00 00 00 0C 00 00 00 00 24
3:11:44 PM #39 Text 0 File DVDPlusRW.cpp, Line 943
EndDAO: Last written address 0
3:11:44 PM #40 SPTI -1066 File SCSIPassThrough.cpp, Line 214
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
CDB Data: 0xF9 15 01 FF 00 00 00 00 00 00 00 00
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
Sense Area: 0x70 00 05 00 00 00 00 0C 00 00 00 00 24
3:11:44 PM #41 Text 0 File DVDR.cpp, Line 7516
Drive: HP DVD Writer 200j
Book Type request [gen]: DVD-ROM, write to EEPROM
Changing the Book Type was finished successfully, return code 0
3:11:44 PM #42 CDR -1066 File WriterStatus.cpp, Line 292
Invalid field in command
D: HP DVD Writer 200j
3:11:44 PM #43 TRANSFER -24 File WriterStatus.cpp, Line 292
Could not perform end of Disc-at-once
3:11:45 PM #44 Phase 38 File dlgbrnst.cpp, Line 1767
Burn process failed at 2.4x (3,324 KB/s)
3:11:45 PM #45 Text 0 File SCSIPTICommands.cpp, Line 287
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
3:11:49 PM #46 Text 0 File Cdrdrv.cpp, Line 11450
DriveLocker: UnLockVolume completed
3:11:49 PM #47 Text 0 File SCSIPTICommands.cpp, Line 450
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
If anyone needs any additional information, I'd be happy to supply it, and thanks in advance if anyone can help.
|
|
Advertisement
|
|
|
|
|
grampyga
Member
|
19. April 2009 @ 22:28 |
Link to this message
|
By looking at your drive's spec, it supports only DVD+R and DVD+RW at 2.4x as writable DVD media.
I believe you need a new drive.
|
|
Vavali
Newbie
|
20. April 2009 @ 00:05 |
Link to this message
|
Yeah, I am using a pretty old computer, and the drive itself isn't as new as the computer itself, if only by a couple of months. The funny thing is, I used to be able to burn just fine with it. DVD's and just plain CD's as well, and now I can't do both.
If it makes a difference, I tried to use both Memorex DVD+R (16x) disks and Maxell DVD+R (16x) disks as well. I don't have access to DVD-R disks so I don't know if that would make a difference. But if there is nothing more I can do besides get a new drive, I was planning to buy a new HP PC anyway.
Thanks for the help!
|
AfterDawn Addict
1 product review
|
20. April 2009 @ 19:37 |
Link to this message
|
DVD-R will not work, your drive was not meant to use them.
Your drive is old...in drive years,very old(it can burn at maximum 2.4X). Your firmware, even though is the latest available, is from 2004. At that time, DVD+R 16X speed were probably not even born, or very new. If you would find some older discs(4X, 8X), you might be able to use this burner. Otherwise, just keep it as a reader and buy a new one-should be able to find some really good ones for ~$20.
 Piss me off, and I Will ignore You! |
|
Advertisement
|
|
|
|
Vavali
Newbie
|
20. April 2009 @ 21:19 |
Link to this message
|
|
Ah, I see. It was about time for me to buy another PC anyway, and I guess being on my mac spoiled me. Thanks for all the help and input guys, I appreciate it.
|
|
