|
DVD Burn failure with Nero - DVD Shrink
|
|
pathyrvc
Newbie
|
8. December 2009 @ 22:18 |
Link to this message
|
hello,
I have been having this problem for quite sometime. Ended up wasting 20 disks so far. This gets sorted out when I re-install the OS (WIN XP Home) and all other programs. But that sounds ridiculous. The error log is as follows :
Can someone help ?
Pathy
---------
Error Log
---------
1C80-*serial number removed*
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 PM
NT-SPTI used
Nero API version: 7.2.3.2
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Nero\Nero 7\Core\
Application: ahead\Nero - Burning Rom
Internal Version: 7, 2, 3, 2
Recorder: <SONY DVD RW DRU-190A> Version: 1.65 - HA 1 TA 1 - 7.2.3.2
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ?
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
=== Scsi-Device-Map ===
DiskPeripheral : SAMSUNG HD160JJ/P atapi Port 2 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVDRRW GSA-H20L atapi Port 5 ID 0 DMA: On
CdRomPeripheral : SONY DVD RW DRU-190A atapi Port 5 ID 1 DMA: Off
=== CDRom-Device-Map ===
HL-DT-ST DVDRRW GSA-H20L E: CDRom0
SONY DVD RW DRU-190A F: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 959MB (982380kB)
Free physical memory: 88MB (90988kB)
Memory in use : 90 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
9.12.2009
NeroAPI
8:24:36 AM #1 Phase 112 File APIProgress.cpp, Line 278
DVD-Video files reallocation started
8:24:36 AM #2 Phase 114 File APIProgress.cpp, Line 278
DVD-Video files reallocation completed (no file modified)
8:24:36 AM #3 Phase 111 File APIProgress.cpp, Line 278
DVD-Video files sorted
8:24:37 AM #4 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 262144KB of Memory
8:24:37 AM #5 Text 0 File Reader.cpp, Line 124
Reader running
8:24:37 AM #6 Text 0 File Writer.cpp, Line 113
Writer F: SONY DVD RW DRU-190A running
8:24:37 AM #7 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.
8:24:37 AM #8 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
8:24:37 AM #9 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
8:24:37 AM #10 Text 0 File Burncd.cpp, Line 3400
Turn on Disc-At-Once, using DVD media
8:26:24 AM #11 Text 0 File DlgWaitCD.cpp, Line 289
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2286127 (508:01.52, 4465MB)
8:26:24 AM #12 Text 0 File DlgWaitCD.cpp, Line 301
Write in overburning mode: NO
8:26:24 AM #13 Text 0 File DlgWaitCD.cpp, Line 2715
Recorder: SONY DVD RW DRU-190A, Media type: DVD-R
Disc Manufacturer: SONY16 - D1
Disc Application Code: 64, Disc Physical Code: 193
8:26:24 AM #14 Text 0 File DlgWaitCD.cpp, Line 473
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: unknown. Medium required by compilation: DVD R/RW, DVD R DL, ram.cfm" class="forum_link" target="_blank">DVD-RAM.)
8:26:24 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2286128 (2286128) = #2286128/508:1.53
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286128 blocks [F: SONY DVD RW DRU-190A]
--------------------------------------------------------------
8:26:24 AM #16 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [F: SONY DVD RW DRU-190A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681990144, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286128 | lead-out | 1 | 0x41 | 0x00
8:26:24 AM #17 Text 0 File SCSIPassThrough.cpp, Line 39
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
8:26:24 AM #18 Text 0 File SCSIPassThrough.cpp, Line 84
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
8:26:24 AM #19 Phase 24 File APIProgress.cpp, Line 278
Caching of files started
8:26:24 AM #20 Text 0 File Burncd.cpp, Line 4231
Cache writing successful.
8:26:24 AM #21 Phase 25 File APIProgress.cpp, Line 278
Caching of files completed
8:26:24 AM #22 Phase 36 File APIProgress.cpp, Line 278
Burn process started at 18x (24,930 KB/s)
8:26:25 AM #23 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
8:26:26 AM #24 Text 0 File DVDR.cpp, Line 2869
Recording mode: Sequential Recording Mode
8:26:26 AM #25 Text 0 File DVDR.cpp, Line 3025
Start write address at LBA 0
DVD high compatibility mode: Yes
8:26:26 AM #26 SPTI -1066 File SCSIPassThrough.cpp, Line 291
F: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAC 00 00 00 00 00 00 00 01 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24
Buffer x046cc200: Len x1008
8:26:26 AM #27 Text 0 File Cdrdrv.cpp, Line 8995
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
8:26:53 AM #28 Text 0 File Cdrdrv.cpp, Line 1224
08:26:53.140 - F: SONY DVD RW DRU-190A : Queue again later
8:29:25 AM #29 SPTI -1135 File SCSIPassThrough.cpp, Line 291
F: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1135)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 00 00 01 07 A0 00 00 20 00 00 00
Sense Area: 0x71 00 03 00 00 00 00 0A 00 00 00 00 0C
Buffer x00f70000: Len x10000
0x00 00 01 BA 44 1A 0F 85 65 A3 01 89 C3 F8 00 00
0x01 E0 07 EC 81 00 00 93 8E 82 81 47 FF A0 39 C8
0xC5 81 CC 1F 00 00 00 01 09 23 44 19 05 07 65 91
8:29:25 AM #30 CDR -1135 File Writer.cpp, Line 302
Write error
F: SONY DVD RW DRU-190A
8:29:25 AM #31 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
8:29:25 AM #32 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
8:29:26 AM #33 Text 0 File DVDR.cpp, Line 3265
EndDAO: Last written address was 67487
8:29:26 AM #34 Phase 38 File APIProgress.cpp, Line 278
Burn process failed at 18x (24,930 KB/s)
8:29:26 AM #35 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.
8:29:26 AM #36 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.
Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 8/18/2005 10:30:00 PM
File 'Drivers\PXHELP20.SYS': Ver=3.00.20a, size=46080 bytes, created 3/9/2006 4:30:00 PM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
This message has been edited since posting. Last time this message was edited on 9. December 2009 @ 01:47
|
Advertisement
|
|
|
Senior Member
|
8. December 2009 @ 22:39 |
Link to this message
|
Nero 7 or 8 do not auto-burn with DVD Shrink, even if you try to interface it with Nero 6.3.1.4
after you run your file using Shrink; Close it and then Open Nero 7 (Burn Room) to burn your file manually.
Good luck !
Live Free or Die.
The rule above all the rules is: Survive !
Capitalism: Funnel most of the $$$ to the already rich.
|
Moderator
|
9. December 2009 @ 01:45 |
Link to this message
|
I've edited out your serial number from the logfile.
Quote: Recorder: <SONY DVD RW DRU-190A> Version: 1.65
firmware is up to date ~ http://www.firmwarehq.com/Sony/DRU-190A/files.html
Quote: CdRomPeripheral : SONY DVD RW DRU-190A atapi Port 5 ID 1 DMA: Off
DMA is off on the Sony burner, fix it via this ~ http://www.dvdplusvideo.com/dvdguide005.html
Quote: Recorder: SONY DVD RW DRU-190A, Media type: DVD-R
Disc Manufacturer: SONY16 - D1
Disc Application Code: 64, Disc Physical Code: 193
burner's firmware is up to date and it's definitely recognising the Sony discs
Quote: 8:26:24 AM #14 Text 0 File DlgWaitCD.cpp, Line 473
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: unknown. Medium required by compilation: DVD R/RW, DVD R DL
..am guessing this is due to MrGuss's reply, i don't do autoburning myself so no expert on it's interaction with DVD Shrink
Quote: Sense Key: 0x03 (KEY_MEDIUM_ERROR)
see above
Quote: Burn process failed at 18x (24,930 KB/s)
Whoa there, let's try a sensible speed, (even with DMA turned back on)... try 8x
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
Senior Member
|
10. December 2009 @ 05:23 |
Link to this message
|
hi :)
one other thing
Quote: Physical memory : 959MB (982380kB)
Free physical memory: 88MB (90988kB)
close more applications to free up more memory, you're in virtual memory territory
which means your hard disc will be 'swapping', therefore interfering with the burn.
you really need at least 256Mb of free memory
gif by ireland
we cant help if you wont help yourself
|
Moderator
|
10. December 2009 @ 05:25 |
Link to this message
|
Hey there; well spotted, i didn't even notice that, to think i used to eat Nero logs for breakfast :)
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
Senior Member
|
10. December 2009 @ 07:35 |
Link to this message
|
ha! ha!
Quote: close more applications to free up more memory, you're in virtual memory territory
which means your hard disc will be 'swapping', therefore interfering with the burn.
you really need at least 256Mb of free memory
that was a direct quote from you in the days when i stalked your answers on nero logs :)
gif by ireland
we cant help if you wont help yourself
|
Moderator
|
10. December 2009 @ 07:37 |
Link to this message
|
I need to clean my specs methinks :), should've realised that was one of mine due to the word 'swapping'. :)
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
seagrave
Member
|
16. December 2009 @ 23:07 |
Link to this message
|
Originally posted by Mrguss: Nero 7 or 8 do not auto-burn with DVD Shrink, even if you try to interface it with Nero 6.3.1.4
Quote: Shrink DOES work with Nero 7 ultra... but not 8.
Of course you can always use Shrink to compress the files and some other software to burn them to disk.
This message has been edited since posting. Last time this message was edited on 16. December 2009 @ 23:09
|
Zylo
Newbie
|
17. December 2009 @ 23:22 |
Link to this message
|
Hello, I have had Windows XP with DVD Shrink, Nero 6, and AnyDVD working great for years and recently got a a virus so bad that I had to wipe the machine clean and start over. So, since I heard great things about Windows 7, I decided to install it. Well, DVD shrink and AnyDVD work fine but it appears that Nero 6 does not work on Windows 7? Please help me with this delima because I am not sure what to do? I have read other posts that the consesus is that moving to Nero 7, 8, or 9 will not solve my problem. Below is my log file. I have tried many things like chaging the nero.exe compatibility to run in Windows XP Server Pack 3 and that did not seem to do anything. Any help would be much appreciated:
/* serail number */
Windows XP 6.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/04 5:35:34 PM
Nero API version: 6.6.0.18
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Internal Version: 6, 6, 0, 18e
Recorder: <_NEC DVD+-RW ND-3530A> Version: 104C - HA 0 TA 1 - 6.6.0.18
Adapter driver: <> HA 0
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
=== Scsi-Device-Map ===
=== CDRom-Device-Map ===
SONY DVD-ROM DDU1615 D: CDRom0
_NEC DVD+-RW ND-3530A E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 2047MB (2097151kB)
Free physical memory: 1316MB (1347980kB)
Memory in use : 57 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
17.12.2009
NeroAPI
11:18:24 PM #1 Phase 112 File APIProgress.cpp, Line 276
DVD-Video files reallocation started
11:18:24 PM #2 Phase 114 File APIProgress.cpp, Line 276
DVD-Video files reallocation completed (no file modified)
11:18:24 PM #3 Phase 111 File APIProgress.cpp, Line 276
DVD-Video files sorted
11:18:24 PM #4 Text 0 File Reader.cpp, Line 127
Reader running
11:18:24 PM #5 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.
11:18:24 PM #6 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
11:18:24 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
11:18:24 PM #8 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
11:18:24 PM #9 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1934895 (429:58.45, 3779MB)
11:18:24 PM #10 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO
11:18:24 PM #11 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: _NEC DVD+-RW ND-3530A, Media type: DVD-R
Disc Manufacturer: MCC 03 - RG20
Disc Application Code: 64, Disc Physical Code: 193
11:18:24 PM #12 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
11:18:24 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1934896 (1934896) = #1934896/429:58.46
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1934896 blocks [_NEC DVD+-RW ND-3530A]
--------------------------------------------------------------
11:18:24 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [_NEC DVD+-RW ND-3530A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3962667008, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1934896 | lead-out | 1 | 0x41 | 0x00
11:18:25 PM #15 Phase 24 File APIProgress.cpp, Line 276
Caching of files started
11:18:25 PM #16 SCSI -500 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x059F6800
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02
11:18:25 PM #17 Text 0 File Burncd.cpp, Line 4122
Cache writing successful.
11:18:25 PM #18 Phase 25 File APIProgress.cpp, Line 276
Caching of files completed
11:18:25 PM #19 Phase 36 File APIProgress.cpp, Line 276
Burn process started at 16x (22,160 KB/s)
11:18:25 PM #20 SCSI -500 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x059F6800
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02
11:18:25 PM #21 SCSI -500 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x059F6800
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0xFF 0x40 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02
11:18:25 PM #22 SCSI -500 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x059F5D80
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x5A 0x00 0x05 0x00 0x00 0x00 0x00 0x00 0x48 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02
11:18:25 PM #23 CDR -500 File ThreadedTransferInterface.cpp, Line 1612
SCSI command aborted
_NEC DVD+-RW ND-3530A\H0 T1
11:18:25 PM #24 Phase 38 File APIProgress.cpp, Line 276
Burn process failed at 16x (22,160 KB/s)
11:18:25 PM #25 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.
11:18:25 PM #26 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.
11:18:25 PM #27 SCSI -500 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 0, TA 1, LUN 0
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x1E 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02
Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon
|
Zylo
Newbie
|
26. December 2009 @ 12:00 |
Link to this message
|
Well, I hope everyone had a merry christmas...I know it is the hollidays and everyone is busy, but I was hoping someone would be able to help me out on my burn error in the above post. I do not know what to do or what to try to fix it. Honestly, Creaky you helped me out a few years back when I had a Nero Burn error by reading my log and telling me that I had to revert back to an older Nero version (Nero-6.6.0.18), so I was happy to see you were still on this site as a moderator and was hoping you would be my savior again?
|
Moderator
|
26. December 2009 @ 13:37 |
Link to this message
|
Originally posted by Zylo: Well, I hope everyone had a merry christmas...I know it is the hollidays and everyone is busy, but I was hoping someone would be able to help me out on my burn error in the above post. I do not know what to do or what to try to fix it. Honestly, Creaky you helped me out a few years back when I had a Nero Burn error by reading my log and telling me that I had to revert back to an older Nero version (Nero-6.6.0.18), so I was happy to see you were still on this site as a moderator and was hoping you would be my savior again?
Merry Christmas; just having a look thru the logfile now and i'll edit this post with anything i find. Cor, just checked, it's been 3 years since i helped you before, doesn't time fly :)
There's a thread recently about Windows 7 and Nero 6.x, i'll try and find that; basically i personally have no problems with Nero 6 under Win7 but other people do, and i don't have to mess with compatibility whereas other people do...
Back shortly...
edit- here's the Win7/Nero 6.x link ~ http://forums.afterdawn.com/t.cfm/f-156/...ndows_7-808986/
edit- as to the logfile ~
Quote: Recorder: <_NEC DVD+-RW ND-3530A> Version: 104C
104C seems to still be the latest firmware for the 3530A ~ http://www.firmwarehq.com/NEC/ND-3530A/files.html ~ though it's dated 2005, however the burner can happily recognise those MCC003 discs, see next paragraph
Quote: Recorder: _NEC DVD+-RW ND-3530A, Media type: DVD-R
Disc Manufacturer: MCC 03 - RG20
Disc Application Code: 64, Disc Physical Code: 193
The firmware is happily recognising your MCC003 discs
Quote: Burn process started at 16x (22,160 KB/s)
There's not a lot to go on in the logfile, other than you, or more likely DVD Shrink is trying to burn those (8x) discs at 16x
Quote: 11:18:25 PM #20 SCSI -500 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x059F6800
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02
That's the only error showing, can only guess that the burner is having a benny because it can't burn those 8x discs at 16x
Your burner can do 16x on -R discs according to this ~ http://www.cdrinfo.com/Sections/Reviews/...ArticleId=13809 but as i say, the MCC003 are only 8x so try burning them at 8x, hopefully that's all you need to do as i can't see anything else wrong in the logfile.
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
tigger27
Junior Member
|
30. December 2009 @ 16:27 |
Link to this message
|
I am getting a "burning process failed" error the last two or three dvds I've tried to back up. Here's the burn log from the most recent movie, "9." HELP!!!
Thanks . . . tigger27
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero API version: 6.6.0.18
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Internal Version: 6, 6, 0, 18e
Recorder: <PHILIPS DVD+-RW SDVD8441>Version: PA48 - HA 1 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
=== Scsi-Device-Map ===
DiskPeripheral : IC25N060ATMR04-0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : PHILIPS DVD+-RW SDVD8441 atapi Port 1 ID 0 DMA: Off
=== CDRom-Device-Map ===
PHILIPS DVD+-RW SDVD8441 E: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 73400320 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 502MB (514480kB)
Free physical memory: 155MB (159604kB)
Memory in use : 68 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
30.12.2009
NeroAPI
3:14:46 PM #1 Phase 112 File APIProgress.cpp, Line 276
DVD-Video files reallocation started
3:14:46 PM #2 Phase 114 File APIProgress.cpp, Line 276
DVD-Video files reallocation completed (no file modified)
3:14:46 PM #3 Phase 111 File APIProgress.cpp, Line 276
DVD-Video files sorted
3:14:46 PM #4 Text 0 File Reader.cpp, Line 127
Reader running
3:14:46 PM #5 Text 0 File Writer.cpp, Line 122
Writer PHILIPS DVD+-RW SDVD8441 running
3:14:46 PM #6 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.
3:14:47 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
3:14:47 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
3:14:47 PM #9 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
3:15:11 PM #10 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2227743 (495:03.18, 4351MB)
3:15:11 PM #11 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO
3:15:11 PM #12 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: PHILIPS DVD+-RW SDVD8441, Media type: DVD+R
3:15:11 PM #13 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD+R DL.)
3:15:11 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2227744 (2227744) = #2227744/495:3.19
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2227744 blocks [PHILIPS DVD+-RW SDVD8441]
--------------------------------------------------------------
3:15:11 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [PHILIPS DVD+-RW SDVD8441] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4562419712, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2227744 | lead-out | 1 | 0x41 | 0x00
3:15:11 PM #16 Phase 24 File APIProgress.cpp, Line 276
Caching of files started
3:15:11 PM #17 Text 0 File Burncd.cpp, Line 4122
Cache writing successful.
3:15:11 PM #18 Phase 25 File APIProgress.cpp, Line 276
Caching of files completed
3:15:11 PM #19 Phase 36 File APIProgress.cpp, Line 276
Burn process started at 6x (8,310 KB/s)
3:15:11 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
3:15:11 PM #21 SCSI -1066 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x0A980600
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x24 0x00
3:15:11 PM #22 Text 0 File DVDR.cpp, Line 5766
Drive: PHILIPS DVD+-RW SDVD8441
Book Type request [QSI]: DVD-ROM, write to EEPROM
Changing the Book Type was finished successfully, return code 0
3:15:11 PM #23 CDR -1211 File DVDR.cpp, Line 5297
Book Type set to: DVD-ROM
3:15:11 PM #24 Text 0 File DVDPlusRW.cpp, Line 659
Start write address at LBA 0
DVD high compatibility mode: Yes
3:59:34 PM #25 SCSI -1122 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x05550000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x57
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x1C 0xF0 0xA0 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x57 0x00
3:59:34 PM #26 CDR -1122 File Writer.cpp, Line 311
Unable to recover TOC
3:59:34 PM #27 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
3:59:34 PM #28 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
4:00:26 PM #29 Text 0 File DVDR.cpp, Line 5766
Drive: PHILIPS DVD+-RW SDVD8441
Book Type request [QSI]: DVD-ROM, write to EEPROM
Changing the Book Type was finished successfully, return code 0
4:00:26 PM #30 Phase 38 File APIProgress.cpp, Line 276
Burn process failed at 6x (8,310 KB/s)
4:00:27 PM #31 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.
4:00:27 PM #32 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.
Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/18/2001 12:07:32 AM
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 10/4/2006 9:42:42 PM
File 'Drivers\PXHELP20.SYS': Ver=3.00.67a, size=43872 bytes, created 11/20/2008 2:19:06 PM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
Senior Member
|
30. December 2009 @ 16:58 |
Link to this message
|
tigger27, you should of started your own thread, but......this is what I see:
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
and
Unable to recover TOC
The burn failed because it's unable to recognize, write to, and/or read to/from the media you're using. The log doesn't show the media specific field, but if it did, I'm sure it would be blank.
Other observations that need fixing and would help:
1)Recorder: <PHILIPS DVD+-RW SDVD8441>Version: PA48
Your burner's firmware is a bit old and should be updated, there's the update javascript:%20validateFileOS('Windows%20XP',%20'Windows%20',%20'ftp://esupport:vImvF88@ftp.gateway.com/pub/hardware_support/drivers/win_xp/portable/mx6000/PhilipsPA49.exe',false,%20true,%20'');
2) CdRomPeripheral : PHILIPS DVD+-RW SDVD8441 atapi Port 1 ID 0 DMA: Off
Enable DMA for the burner.
You could also try using different media
|
Moderator
|
30. December 2009 @ 17:11 |
Link to this message
|
edit- Hehe John beat me to it as i was compiling my reply in notepad :)
Originally posted by tigger27: I am getting a "burning process failed" error the last two or three dvds I've tried to back up. Here's the burn log from the most recent movie, "9." HELP!!!
Thanks . . . tigger27
Quote: Recorder: <PHILIPS DVD+-RW SDVD8441>Version: PA48
Newer firmware PA49, dated March 2006 ~ http://www.firmwarehq.com/Philips/SDVD8441/files.html - don't know if that'll help your burner recognise the blank discs you're trying to use
Quote: CdRomPeripheral : PHILIPS DVD+-RW SDVD8441 atapi Port 1 ID 0 DMA: Off
DMA needs to be ON, fix it via this ~ http://www.dvdplusvideo.com/dvdguide005.html
Quote: Recorder: PHILIPS DVD+-RW SDVD8441, Media type: DVD+R
The burner can determine that you're trying to use a +R disc.....
Quote: >>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD+R DL.)
...however the burner's firmware can't actually properly recognise the disc. As i say there's a newer firmware out but don't know whether even that is too old to recognise those discs. You either have to use older discs (that the firmware can recognise) or buy a new burner.
Quote: Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Medium error ie disc error
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
This message has been edited since posting. Last time this message was edited on 30. December 2009 @ 17:12
|
Senior Member
|
30. December 2009 @ 18:03 |
Link to this message
|
Hi creaky,
Must of just snuck it in, looks like your beakdown is more informative than mine.
Hope you had a great Christmas, enjoy the New Year:)
|
Moderator
|
30. December 2009 @ 18:16 |
Link to this message
|
Cheers, same to you.
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
Zylo
Newbie
|
6. January 2010 @ 20:49 |
Link to this message
|
Thanks for your response Creaky...sorry for my tardy response, I have been out of town for work and just got back...anyways, I lowered the burn rate and that still did not fix my issue. I checked out the link you gave me for the thread recently about Windows 7 and Nero 6.x. After reading that, I unistalled anydvd, dvdshrink, and nero. Then installed anydvd, shrink and then nero (in that order). And to no avail, I still had the same outcome. I tried to just burn a CD with 1 mp3 file and that fails too. Below is log file for the failed buring CD and DVD. Any ideas on what I can do to resolve this? It seems that the error "Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)" is what is common in both the DVD and CD burn error logs. I googled this error but did not find much. Any help is much appreciated, cheers.
********************
BURN CD LOG
********************
1A23-*********
Windows XP 6.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/04 5:35:34 PM
Nero Version: 6.6.0.18
Internal Version: 6, 6, 0, 18e
(Nero Express)
Recorder: <_NEC DVD+-RW ND-3530A> Version: 104C - HA 0 TA 1 - 6.6.0.18
Adapter driver: <> HA 0
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <SONY DVD-ROM DDU1615 >Version: FDS1 - HA 0 TA 0 - 6.6.0.18
Adapter driver: <> HA 0
=== Scsi-Device-Map ===
=== CDRom-Device-Map ===
SONY DVD-ROM DDU1615 D: CDRom0
_NEC DVD+-RW ND-3530A E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 2047MB (2097151kB)
Free physical memory: 1746MB (1788152kB)
Memory in use : 43 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
6.1.2010
Audio CD
8:12:22 PM #1 CDADOC -1 File Cdadoc.cpp, Line 1465
Audio item log info:
Audio document burn settings:
=============================
Burn mode: DAO,
CD Text: On,
Cache disk or network files: No,
Cache small files: No,
Cache files smaller than 65536 bytes.
Audio Multisession: No
List of audio tracks:
=====================
Track 01: Length: 08:18.42, Pause frames: 150, Filters: 0, Name: 'Carry_Me_Away_feat__Emma_Hewitt_Original_Club_Mix.mp3'.
Total size: 08:20.42
8:12:22 PM #2 Text 0 File Burncd.cpp, Line 2948
_NEC DVD+-RW ND-3530A
JustLink activated
8:12:22 PM #3 Text 0 File Reader.cpp, Line 127
Reader running
8:12:22 PM #4 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.
8:12:22 PM #5 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using CD-R/RW media
8:12:23 PM #6 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 359848 ( 79:59.73)
Last address to be written: 37391 ( 8:20.41)
8:12:23 PM #7 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)
8:12:23 PM #8 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: _NEC DVD+-RW ND-3530A;
CDR code: 00 97 17 06; OSJ entry from: Moser Baer India Limited
ATIP Data:
Special Info [hex] 1: D0 00 A0, 2: 61 11 06 (LI 97:17.06), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)
8:12:23 PM #9 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
8:12:23 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_AUDIO_NOPRE (Carry_Me_Away_feat__Emma_Hewitt_Original_Club_Mix.mp3)
2 indices, index0 (150) not provided
original disc pos #0 + 37392 (37392) = #37392/8:18.42
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 37392 blocks [_NEC DVD+-RW ND-3530A]
--------------------------------------------------------------
8:12:23 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [_NEC DVD+-RW ND-3530A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 0 352800 88298784, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
-150 | lead-in | 0 | 0x01 | 0x00
-150 | 1 | 0 | 0x21 | 0x00
0 | 1 | 1 | 0x21 | 0x00
37392 | lead-out | 1 | 0x01 | 0x00
8:12:23 PM #12 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 24x (3,600 KB/s)
8:12:23 PM #13 SCSI -500 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x05A46800
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0xFF 0x40 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02
8:12:23 PM #14 SCSI -500 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x05A40AA0
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x5A 0x00 0x05 0x00 0x00 0x00 0x00 0x00 0x48 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02
8:12:23 PM #15 CDR -500 File ThreadedTransferInterface.cpp, Line 1612
SCSI command aborted
_NEC DVD+-RW ND-3530A\H0 T1
8:12:23 PM #16 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 24x (3,600 KB/s)
8:12:23 PM #17 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.
8:12:23 PM #18 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.
8:12:23 PM #19 SCSI -500 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 0, TA 1, LUN 0
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x1E 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02
Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon
*********************
BURN DVD LOG
**********************
1A23-**************
Windows XP 6.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/04 5:35:34 PM
Nero API version: 6.6.0.18
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Internal Version: 6, 6, 0, 18e
Recorder: <_NEC DVD+-RW ND-3530A> Version: 104C - HA 0 TA 1 - 6.6.0.18
Adapter driver: <> HA 0
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
=== Scsi-Device-Map ===
=== CDRom-Device-Map ===
SONY DVD-ROM DDU1615 D: CDRom0
_NEC DVD+-RW ND-3530A E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 2047MB (2097151kB)
Free physical memory: 2047MB (2097151kB)
Memory in use : 27 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
3.1.2010
NeroAPI
6:09:30 PM #1 Phase 112 File APIProgress.cpp, Line 276
DVD-Video files reallocation started
6:09:30 PM #2 Phase 114 File APIProgress.cpp, Line 276
DVD-Video files reallocation completed (no file modified)
6:09:30 PM #3 Phase 111 File APIProgress.cpp, Line 276
DVD-Video files sorted
6:09:30 PM #4 Text 0 File Reader.cpp, Line 127
Reader running
6:09:30 PM #5 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.
6:09:30 PM #6 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
6:09:30 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
6:09:30 PM #8 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
6:09:30 PM #9 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1800719 (400:09.44, 3517MB)
6:09:30 PM #10 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO
6:09:30 PM #11 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: _NEC DVD+-RW ND-3530A, Media type: DVD-R
Disc Manufacturer: MCC 03 - RG20
Disc Application Code: 64, Disc Physical Code: 193
6:09:30 PM #12 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
6:09:30 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1800720 (1800720) = #1800720/400:9.45
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1800720 blocks [_NEC DVD+-RW ND-3530A]
--------------------------------------------------------------
6:09:30 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [_NEC DVD+-RW ND-3530A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3687874560, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1800720 | lead-out | 1 | 0x41 | 0x00
6:09:30 PM #15 Phase 24 File APIProgress.cpp, Line 276
Caching of files started
6:09:30 PM #16 SCSI -500 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x09A26800
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02
6:09:31 PM #17 Text 0 File Burncd.cpp, Line 4122
Cache writing successful.
6:09:31 PM #18 Phase 25 File APIProgress.cpp, Line 276
Caching of files completed
6:09:31 PM #19 Phase 36 File APIProgress.cpp, Line 276
Burn process started at 8x (11,080 KB/s)
6:09:31 PM #20 SCSI -500 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x09A26800
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02
6:09:31 PM #21 SCSI -500 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x09A26800
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0xFF 0x40 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02
6:09:31 PM #22 SCSI -500 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x09901D30
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x5A 0x00 0x05 0x00 0x00 0x00 0x00 0x00 0x48 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02
6:09:31 PM #23 CDR -500 File ThreadedTransferInterface.cpp, Line 1612
SCSI command aborted
_NEC DVD+-RW ND-3530A\H0 T1
6:09:31 PM #24 Phase 38 File APIProgress.cpp, Line 276
Burn process failed at 8x (11,080 KB/s)
6:09:31 PM #25 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.
6:09:31 PM #26 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.
6:09:31 PM #27 SCSI -500 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 0, TA 1, LUN 0
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x1E 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02
Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon
|
Senior Member
|
6. January 2010 @ 21:54 |
Link to this message
|
@Zylo
I believe I see what your problem might be.
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
This error condition could mean that there's a problem with the way your drives are being recognized by the OS.
Here is a snapshot of your log where I believe nero is first indicating something is wrong.
Recorder: <_NEC DVD+-RW ND-3530A> Version: 104C - HA 0 TA 1 - 6.6.0.18
Adapter driver: <> HA 0
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <SONY DVD-ROM DDU1615 >Version: FDS1 - HA 0 TA 0 - 6.6.0.18
Adapter driver: <> HA 0
ATAPI (Advanced Technology Attachment Packet Interface) is a standard interface used to connect components such as CD/DVD drives (and writers) and hard disk drives (HDDs) to a motherboard inside a computer to interact with the other components and operating system.
The OS doesn't seem to be properly detecting your Sony and NEC drives, the system drivers for those devices aren't present or corrupted.
Here's a snapshot from Tigger27's log which shows his OS recognizes his drive and installed the correct/functional drivers for it.
Recorder: <PHILIPS DVD+-RW SDVD8441>Version: PA48 - HA 1 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
I believe that the solution should be as simple as uninstalling the IDE channel that the drives are connected to and reboot the system. The drives should be re-detected on boot-up and correctly reinstalled.
I would first uninstall nero (using nero's removal tool), reboot, uninstall the IDE channel, reboot, reinstall nero, retry burning a dvd.
This message has been edited since posting. Last time this message was edited on 6. January 2010 @ 22:16
|
Moderator
|
7. January 2010 @ 06:47 |
Link to this message
|
John's reply might explain why there's no entries under 'Scsi-Device-Map' in Zylo's latest two burn log entries. Here's a snippet from one of my burns ~
Quote: Nero Version: 6.6.0.18
Internal Version: 6, 6, 0, 18e
Recorder: <HL-DT-ST DVDRAM GSA-H66N>Version: CB00 - HA 7 TA 1 - 6.6.0.18
Adapter driver: <> HA 7
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ?
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: <HL-DT-ST DVDRAM GSA-H66N >Version: CB00 - HA 6 TA 0 - 6.6.0.18
Adapter driver: <Si3132r5> HA 6
=== Scsi-Device-Map ===
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4167B atapi Port 0 ID 0 DMA: On
DiskPeripheral : WDC WD5000AAKS-75TMA0 atapi Port 2 ID 0 DMA: On
DiskPeripheral : WDC WD5000AAKS-75TMA0 atapi Port 2 ID 1 DMA: On
DiskPeripheral : WDC WD5000AAKS-00YGA0 atapi Port 3 ID 0 DMA: On
DiskPeripheral : WDC WD5000AAKS-00YGA0 atapi Port 4 ID 0 DMA: On
DiskPeripheral : WDC WD5000AAKS-75TMA0 atapi Port 5 ID 0 DMA: On
DiskPeripheral : WDC WD5000AAKS-75TMA0 atapi Port 5 ID 1 DMA: On
CdRomPeripheral : HL-DT-STDVDRAM GSA-H66N CB00 Si3132r5 Port 6 ID 0 DMA: Off
CdRomPeripheral : HL-DT-STDVDRAM GSA-H66N CB00 Si3132r5 Port 6 ID 0 DMA: Off
OtherPeripheral : SI Pseudo Device 0000 Si3132r5 Port 6 ID 31 DMA: Off
=== CDRom-Device-Map ===
HL-DT-ST DVDRAM GSA-4167B D: CDRom2
HL-DT-ST DVDRAM GSA-H66N E: CDRom0
HL-DT-ST DVDRAM GSA-H66N F: CDRom1
=======================
(The 'Connected to MMC as unknown drive' bit is just because my LG H66N's (SATA hence why DMA is off on mine) burners are newer than my Nero ie they're only generically recognised. No problems over the last two years of burning though.)
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
scum101
Suspended due to non-functional email address
|
7. January 2010 @ 08:19 |
Link to this message
|
Why do people even bother with nero? .. imgburn is free.. and uses the normal windoze atapi layer instead of trying to replace it.
|
Moderator
|
7. January 2010 @ 09:04 |
Link to this message
|
I thought i'd suggested that further up the thread; maybe not, i get involved in so many threads that i don't know which way is up sometimes.
What i will do is add my usual disclaimer. I still have Nero purely as imgburn can't do multiple concurrent burns, but for most burning i do that doesn't require multiple concurrent burns i use imgburn.
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
This message has been edited since posting. Last time this message was edited on 7. January 2010 @ 09:05
|
scum101
Suspended due to non-functional email address
|
7. January 2010 @ 09:27 |
Link to this message
|
I'm sure imgburn could be modded to open 2 to 200 concurrent burns.. now where is that source code?.. it's probably only a flick of a couple of switches somewhere.
Wonder if our pal Lightnin has a valid reason for not doing so.. very likely actually.. something like.. "it causes bus clogging and poor burns" or something like that.
|
Senior Member
|
7. January 2010 @ 10:06 |
Link to this message
|
hi :)
how about mine then
Quote: Recorder: <ATAPI iHAP322 9> Version: 6L1C - HA 0 TA 0 - 6.3.1.15
Adapter driver: <atapi> HA 0
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 11
Drive is autodetected - recorder class: DVD+R9 DL recorder
=== Scsi-Device-Map ===
CdRomPeripheral : ATAPI iHAP322 9 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : ATAPI iHAP322 9 atapi Port 0 ID 1 DMA: On
DiskPeripheral : Maxtor 6L080M0 atapi Port 2 ID 0 DMA: On
CdRomPeripheral : Optiarc DVD RW AD-7240S atapi Port 3 ID 0 DMA: On
=== CDRom-Device-Map ===
ATAPI iHAP322 9 H: CDRom0
ATAPI iHAP322 9 I: CDRom1
Optiarc DVD RW AD-7240S J: CDRom2
the hdd and optiarc are on sata
the liteons are ide
the liteon shows mcc unknown yet all show as dma on
hi P X :)
gif by ireland
we cant help if you wont help yourself
|
Moderator
|
7. January 2010 @ 11:26 |
Link to this message
|
Yeah i wish Lightning UK would magic up a bit of code for concurrent burns, he could wipe out Nero overnight.
Argh, now that has me confused :), i thought DMA had nothing to do with SATA.... (i know USB has nothing to do with DMA, but SATA, hmmm...).
..i'm rusty with DMA, it's probably just that my SATA burners are on a cheapy no-name controller card. All i know is that they burn 8x fine, that'll do for me, it'll save me reading up on the subject :)
edit- hang on, i completely overlooked the fact that the 6 internal Western Digital drives are SATA, and DMA is on for those.
Ignore me, i'm going for a coffee, brain gets addled sometimes.
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
This message has been edited since posting. Last time this message was edited on 7. January 2010 @ 11:35
|
Advertisement
|
|
|
scum101
Suspended due to non-functional email address
|
7. January 2010 @ 11:42 |
Link to this message
|
Mine both run on the MMC-GENERIC driver in k3b ..and dma on for both.
/dev/hdc:
IO_support = 1 (32-bit)
unmaskirq = 1 (on)
using_dma = 1 (on)
keepsettings = 0 (off)
readonly = 0 (off)
readahead = 256 (on)
HDIO_GETGEO failed: Inappropriate ioctl for device
/dev/hdd:
IO_support = 1 (32-bit)
unmaskirq = 1 (on)
using_dma = 1 (on)
keepsettings = 0 (off)
readonly = 0 (off)
readahead = 256 (on)
HDIO_GETGEO failed: Inappropriate ioctl for device
(no disks in.. hehehe)
|
|