|
A NEWBIES GUIDE TO SETTING UP A DM500S FOR CARDSHARING
|
|
|
lankey
Junior Member
|
4. July 2011 @ 16:21 |
Link to this message
|
Originally posted by piopat:
Originally posted by lankey:
Originally posted by piopat:
Originally posted by lankey:
hi guys need a little bit of advice i have flashed my dreambox500s with lots of diffrent images and i have tried useing diffrent dream ups and all i keep getting is flashed succsesful i disconect and set up to the sky dish and when i turn box on i get nothing on screen and i cant turn the box on and off and the remote does work
lankey with a dm500 you should flash erase before flashing the box with a second image as that box has little memory capacity .does the box have a static green light on it ? a static green light would indicate that its retrievable ,red and green lights would not be good .
yea i did do a erase flash before each image and it has got a static green light and when i connect the box to pc it says box alive and talking to us how do i retrieve it and has some one got a working image for db500s i can try with Dream-Up 1.3.2.1 i would be more than greatfull for the advice
lankey i sent you a pm mate .
Originally posted by piopat:
Originally posted by lankey:
Originally posted by piopat:
Originally posted by lankey:
hi guys need a little bit of advice i have flashed my dreambox500s with lots of diffrent images and i have tried useing diffrent dream ups and all i keep getting is flashed succsesful i disconect and set up to the sky dish and when i turn box on i get nothing on screen and i cant turn the box on and off and the remote does work
lankey with a dm500 you should flash erase before flashing the box with a second image as that box has little memory capacity .does the box have a static green light on it ? a static green light would indicate that its retrievable ,red and green lights would not be good .
yea i did do a erase flash before each image and it has got a static green light and when i connect the box to pc it says box alive and talking to us how do i retrieve it and has some one got a working image for db500s i can try with Dream-Up 1.3.2.1 i would be more than greatfull for the advice
lankey i sent you a pm mate .
hi mate still no having much luck i tried freshly download stuff from line one and 2 off your sig and i have even tried to flash it on a diffrent pc still no joy when i download the zip files what do you recomened i open it with
|
|
Advertisement
|
|
|
|
Senior Member
|
4. July 2011 @ 16:28 |
Link to this message
|
you could use peazip which works well or winrar ,both can be downloaded from link number 1 of my signature area
This message has been edited since posting. Last time this message was edited on 4. July 2011 @ 16:29
|
|
dim21
Newbie
|
5. July 2011 @ 13:26 |
Link to this message
|
|
anyone advise which is the best for server dm600 or 800 and which site would be the best to buy original not clone
This message has been edited since posting. Last time this message was edited on 5. July 2011 @ 13:28
|
Senior Member
|
5. July 2011 @ 21:16 |
Link to this message
|
a server is the same whatever dreambox you use except if a server is hd only (a dm600 is sd not hd ) so if you buy a dm500/dm600 /dm7020 as long as your server provides a full sd subscription which most do your fine .if you buy a dm500hd /dm800hd i suppose you want a hd sub which again most servers provide so either way you should be fine . dim i sent you a pm .
|
|
dbzuk
Newbie
|
12. July 2011 @ 20:38 |
Link to this message
|
hi,
wondering if you can help me, if i have dm500s as my server (which has my card in it), and i have hd subscription, will i be able to watch HD channels in the other room with a tm-5402HD box? (via ccCAM) i am unable to receive scrambled HD channels but can receive normal SD channels. i just got the box today.
|
Senior Member
|
12. July 2011 @ 21:35 |
Link to this message
|
you can use a dm500s as a server with a card in it for a hd subscription ,that will work all tho you cant view hd channels on a dm500s (but that said some channels are sd ) .i dont know about the tm-5402 but if the dm5oos is setup for sharing and the technomate is recieving it would seem your setup is working . why the tm is only recieving sd (standard definition ) i dont know ,but it stands to reason that if the dm500s is allowing sd shares it should allow hd shares . maybe the other guys can throw a little light on the subject .
|
|
dbzuk
Newbie
|
13. July 2011 @ 08:17 |
Link to this message
|
Originally posted by piopat:
you can use a dm500s as a server with a card in it for a hd subscription ,that will work all tho you cant view hd channels on a dm500s (but that said some channels are sd ) .i dont know about the tm-5402 but if the dm5oos is setup for sharing and the technomate is recieving it would seem your setup is working . why the tm is only recieving sd (standard definition ) i dont know ,but it stands to reason that if the dm500s is allowing sd shares it should allow hd shares . maybe the other guys can throw a little light on the subject .
thanks piopat.
so the dm500s is able to decrypt the hd channels and share the keys to the other boxes?
i was just wondering if anyone else had their setup this way: dm500s as server sharing via cccam with a HD box that supports cccam another room (not necessarily tm-5402)
|
Senior Member
|
13. July 2011 @ 09:55 |
Link to this message
|
its actually cccam which does the work not really the box Originally posted by dbzuk:
Originally posted by piopat:
you can use a dm500s as a server with a card in it for a hd subscription ,that will work all tho you cant view hd channels on a dm500s (but that said some channels are sd ) .i dont know about the tm-5402 but if the dm5oos is setup for sharing and the technomate is recieving it would seem your setup is working . why the tm is only recieving sd (standard definition ) i dont know ,but it stands to reason that if the dm500s is allowing sd shares it should allow hd shares . maybe the other guys can throw a little light on the subject .
thanks piopat.
so the dm500s is able to decrypt the hd channels and share the keys to the other boxes?
i was just wondering if anyone else had their setup this way: dm500s as server sharing via cccam with a HD box that supports cccam another room (not necessarily tm-5402)
simply put cccam reads your card and sends the decryption info to the other box/boxes ,but even tho cccam is capable of reading the card and allowing the channels to be viewed on other boxes the box which the card is in (the server)if the card is for a hd subscription in order to view hd channels on the server box it must be a hd box .
|
Senior Member
|
17. July 2011 @ 09:16 |
Link to this message
|
|
|
lankey
Junior Member
|
20. July 2011 @ 15:49 |
Link to this message
|
hi guys after a little help again pls ive downloaded dreambox control center from your links and i cant open it or get it to run
|
|
jackoooh
Member
|
20. July 2011 @ 16:03 |
Link to this message
|
j casey
|
Senior Member
|
20. July 2011 @ 16:39 |
Link to this message
|
lankey if its a zip or rar file you will need a program to open it such as winrar or peazip ,you can download either or both from the first link of my signature area.
|
|
lankey
Junior Member
|
21. July 2011 @ 02:04 |
Link to this message
|
|
thanks for that guys ive done that part iam now stuck on entering the cline i had a test line yesterday i could not get it to work the line i tested it started with N: do i have to still put the c before it when i enter the line
|
|
jhammer02
Junior Member
|
22. July 2011 @ 15:03 |
Link to this message
|
Please advise which is the best image for dm600 pvr which has epg?
Thanks
|
|
jhammer02
Junior Member
|
23. July 2011 @ 09:05 |
Link to this message
|
I have just upgraded the image to enigma2 pcd3.1 through internet explorer flash, as I know the ip. successfully installed the image, when running ftp to find the cccam.cfg I cant find it, please can anyone help
|
|
lankey
Junior Member
|
23. July 2011 @ 09:10 |
Link to this message
|
Originally posted by piopat:
lankey if its a zip or rar file you will need a program to open it such as winrar or peazip ,you can download either or both from the first link of my signature area.
i would like to say a big thanks to piopat and the rest of you on her for your help getting me up and running with my dm500s thanks guys keep up the good work
|
Senior Member
|
23. July 2011 @ 09:48 |
Link to this message
|
Originally posted by lankey:
Originally posted by piopat:
lankey if its a zip or rar file you will need a program to open it such as winrar or peazip ,you can download either or both from the first link of my signature area.
i would like to say a big thanks to piopat and the rest of you on her for your help getting me up and running with my dm500s thanks guys keep up the good work
your wellcome lankey mate .
|
Senior Member
|
23. July 2011 @ 09:59 |
Link to this message
|
Originally posted by jhammer02:
I have just upgraded the image to enigma2 pcd3.1 through internet explorer flash, as I know the ip. successfully installed the image, when running ftp to find the cccam.cfg I cant find it, please can anyone help
does it say cccam on the tv screen ? you know when you can see the clock /now and next programs /hops /ecm time it should say cccam there some where (if it doesnt that indidcates that cccam is either not installed or not set as default cam ). if it does display cccam on the screen its probably installed and all your missing is the cccam.cfg file ,if thats the case you can download a cccam.cfg file from link number 1 of my signature area (there are a few lines in the file delete them and put in your c and f lines ) then pop the cccam.cfg file into var/etc in the box and restart the cam .
|
|
jhammer02
Junior Member
|
23. July 2011 @ 12:10 |
Link to this message
|
Originally posted by piopat:
Originally posted by jhammer02:
I have just upgraded the image to enigma2 pcd3.1 through internet explorer flash, as I know the ip. successfully installed the image, when running ftp to find the cccam.cfg I cant find it, please can anyone help
does it say cccam on the tv screen ? you know when you can see the clock /now and next programs /hops /ecm time it should say cccam there some where (if it doesnt that indidcates that cccam is either not installed or not set as default cam ). if it does display cccam on the screen its probably installed and all your missing is the cccam.cfg file ,if thats the case you can download a cccam.cfg file from link number 1 of my signature area (there are a few lines in the file delete them and put in your c and f lines ) then pop the cccam.cfg file into var/etc in the box and restart the cam .
I have managed to install newenigma2 v2.3.1 and now i have cccam.cfg, but some channels for s*y m***es have no sound, any suggestions?
|
|
jackoooh
Member
|
23. July 2011 @ 13:14 |
Link to this message
|
Originally posted by jhammer02:
Originally posted by piopat:
Originally posted by jhammer02:
I have just upgraded the image to enigma2 pcd3.1 through internet explorer flash, as I know the ip. successfully installed the image, when running ftp to find the cccam.cfg I cant find it, please can anyone help
does it say cccam on the tv screen ? you know when you can see the clock /now and next programs /hops /ecm time it should say cccam there some where (if it doesnt that indidcates that cccam is either not installed or not set as default cam ). if it does display cccam on the screen its probably installed and all your missing is the cccam.cfg file ,if thats the case you can download a cccam.cfg file from link number 1 of my signature area (there are a few lines in the file delete them and put in your c and f lines ) then pop the cccam.cfg file into var/etc in the box and restart the cam .
I have managed to install newenigma2 v2.3.1 and now i have cccam.cfg, but some channels for s*y m***es have no sound, any suggestions?
Hello mate just press audio on youre remote control and set to english,hope this helps..
j casey
|
|
jhammer02
Junior Member
|
23. July 2011 @ 15:03 |
Link to this message
|
I had rebooted the box and now it keep saying on the tv - booting on the box it has red and green lights both on, i am unable to connect to it via dcc or internet explorer, please help, I have been really struggling with this since yesterday
thanks
|
Senior Member
1 product review
|
23. July 2011 @ 15:39 |
Link to this message
|
|
Think that you may need to re flash it with a new image or the same image that you were using but downloaded from a different source.
|
|
jhammer02
Junior Member
|
23. July 2011 @ 15:41 |
Link to this message
|
|
which is the best image for dm600
|
Senior Member
1 product review
|
23. July 2011 @ 15:47 |
Link to this message
|
|
I wouldn't know, I would suggest using the same image as before as you got to the point of finding your way around it and knowing what you were doing.
|
|
Advertisement
|
|
|
Senior Member
|
23. July 2011 @ 16:37 |
Link to this message
|
|
there is a working nabilo image for a dm600 that you can download from link number 1 of my signature area ,but you will need to pop an uptodate satellite.xml file into var/etc and thats easily done and installing cccam with that image is easy .
|
