Originally posted by sb18180:

---

anyone got a sly channel list(.cndf file)for the blade 7000hd so my channel numbers are the same as sly channel numbers.thanks.

---

Originally posted by sb18180:

---

anyone got a sly channel list(.cndf file)for the blade 7000hd so my channel numbers are the same as sly channel numbers.thanks.

---

Originally posted by gerrard08:

---

Hi, does this box (Blade 7000) work on virmin/cable?, and if sat only, then will i need anything else if i purchased the box?, CS sub etc

---

Originally posted by EAMO_TOO:

---

Originally posted by sb18180:

---

anyone got a sly channel list(.cndf file)for the blade 7000hd so my channel numbers are the same as sly channel numbers.thanks.

---

Been busy all day have a look thru these if you haven't already
http://www.blademedia.tv/index-3.html
http://www.4shared.com/dir/Ed7NoGJd/sharing.html
You might find something there to help you

---

Originally posted by sb18180:

---

a factory reset would lose her cline info.she is best to keep a record of the cline info for future reference.9991 will take you to the cline slots take the info from whatever slot she is using ip address,user name,password type of cam ect.you can upload it to a usb stick then if she loses it she will have the info.as for the cndf file you would have to delete all existing channels first,put cndf file on usb stick hilight the file on the blade and press ok NOT download.it will then write your file to blade.

---

Originally posted by gerrard08:

---

Originally posted by sb18180:

---

a factory reset would lose her cline info.she is best to keep a record of the cline info for future reference.9991 will take you to the cline slots take the info from whatever slot she is using ip address,user name,password type of cam ect.you can upload it to a usb stick then if she loses it she will have the info.as for the cndf file you would have to delete all existing channels first,put cndf file on usb stick hilight the file on the blade and press ok NOT download.it will then write your file to blade.

---

Thats great..thanks...she got the screen up that you are refering to..but when she tried to save the CSInfo by pressing the GRP button on remote..the box prompts for a password....she tried 0000, but it doesnt accept that.....any ideas or is there another way to save the CSInfo>

thanks again.

---

Originally posted by gerrard08:

---

Hi...again...my friend went to the supplier today...they refused to give her the pin...because they dont want to disclose the CS/line...she was there for around 20mins telling them that she paid for the box and the cs/sub so she should have access to this info...but they wouldnt have any of it....so she just left very dissapointed...i told my friend its not worth going bak to them...and just wait till the 12 month cs/sub is up..and then somehow reset the blade box...but will she be able to reset/flash the box...will she need that pin to flash the box?.....

at worst i guess..when the 12/mth sub is done...take the box to the supplier and get them to flash it and then purchase the cs/sub from the internet like eveyr1 else..is that a good idea?

i will be getting a blade soon...im just glad i wont be buying it from that supplier..those guys have caused her alot of stress..


any other suggestions would be appreciated. thanks again.

---

Originally posted by sb18180:

---

what about a reflash after the year? surly this would delete any csline info thats locked.making the box useable again with another csline.or just over write with a blank or new csline txt.or there are other slots you could enable for a different cline provider.plenty of options after the year to keep the box running on a different c/nline.just ask supplier if its ok to update firmware then if he says ok and it goes tits up take it back.

---

Originally posted by ensoniq:

---

Hi Gerrard08,

If you've got the CNDF file (channels) and the STB file (the actual box's image) you'll be fine.. (though you'll still find you can't access the suppliers modified password - like now, so no change there).

I have a couple of Blades and before I posted, had 2 *test* lines on one that I created, had a full favourite/channel selection etc.. - I used the download menu, SAVE STB option and save the box image onto USB then.. went in, deleted all channels and factory reset the unit (right back to the point it's asking if I want it in English, Turkish, Swedish etc - just to confirm the info).

Menu/Download - and the USB pen drive STB file (which was still in the back of the box) was there, so moved down to the back up just made, pressed OK and let it do the rebuild on the box.

Box came back on with no channels, BUT with the new V1.19b firmware (as it had previously) AND the test connections I'd set up.

Back into download, picked the channel list (NCDF) from the USB drive, pressed OK - 10 seconds later - everything back in order ... just the way it was 5 minutes before.

The days of Null Modem cables and powering on/off at the right point are long gone (that's older technology) - the Blade and others (like the Kryptview KV780) will or do already all update direct from the web - starting with regional channel lists (so you don't have to bother finding BBC Wales instead of BBC London etc).

As I said in last post, if push comes to shove and they won't give you the PIN (a. it's a little suspicious - as most lines are pretty much anonymous via VPN!?), (b. it's a bit cheeky full stop) and (c. when you explain your mother in law was trying to wash your 'smalls' in a standard 40 degree non-fast colour wash - she used the wrong remote and reset your Blade - lol... if they won't give you the PIN, then presumably they've backed up your box details somewhere as they'll have the Serial/MAC of the Ethernet connection).

Cheers

---