|
Kryptview Starview
|
|
|
mojo88
Member
|
14. December 2010 @ 15:47 |
Link to this message
|
|
box is working fine at the moment but question is for how long till i get the message 'scrambled no signal'then i have to reset, rescan etc etc...
thanks for your help guys
|
|
Advertisement
|
|
|
|
|
EAMO_TOO
Senior Member
|
14. December 2010 @ 17:42 |
Link to this message
|
Originally posted by mojo88:
box is working fine at the moment but question is for how long till i get the message 'scrambled no signal'then i have to reset, rescan etc etc...
thanks for your help guys
Have you done a S/W update & reset NETWORK CARD, if so all should be well.
|
|
mojo88
Member
|
14. December 2010 @ 18:15 |
Link to this message
|
Originally posted by EAMO_TOO:
Originally posted by mojo88:
box is working fine at the moment but question is for how long till i get the message 'scrambled no signal'then i have to reset, rescan etc etc...
thanks for your help guys
Have you done a S/W update & reset NETWORK CARD, if so all should be well.
i already have the latest software installed reset network card i do not know how to
|
AfterDawn Addict
3 product reviews
|
15. December 2010 @ 13:56 |
Link to this message
|
|
he means reboot your modem and router try that and see how it goes
|
|
gunner_nasri
Inactive
|
15. December 2010 @ 15:59 |
Link to this message
|
Originally posted by e45:
he means reboot your modem and router try that and see how it goes
mate do you know why adult chanell hasnt been working since last week???
|
|
tongs007
Senior Member
|
15. December 2010 @ 16:06 |
Link to this message
|
Originally posted by gunner_nasri:
Originally posted by e45:
he means reboot your modem and router try that and see how it goes
mate do you know why adult chanell hasnt been working since last week???
because your a wanker :P lol seriously tho il check at ten for ya. see if mines on
|
AfterDawn Addict
3 product reviews
|
16. December 2010 @ 04:08 |
Link to this message
|
|
you only get the free ones ie playboy adult and tvx try a rescan on your box or turn it to standby over night in case they have moved the freq
This message has been edited since posting. Last time this message was edited on 16. December 2010 @ 04:08
|
|
mantas42
Member
|
16. December 2010 @ 14:43 |
Link to this message
|
|
Could anybody tell me are you better off leaving krypview boxes on stand by over night or just leave them on ????
|
AfterDawn Addict
3 product reviews
|
16. December 2010 @ 15:08 |
Link to this message
|
|
dont matter either way
|
|
overhill
Junior Member
|
17. December 2010 @ 19:54 |
Link to this message
|
|
Someone in the past said I was a spy. It's plain to see if you read between the lines where the interests are coming from and the truth of the matter is that everyone has a price.
I not a spy or a person who has a vested interest at all but an over the hill observer who like everyone else likes to get value for money which can be difficult at the best of times.
Happy Christmas to all on both sides of the pond!
LOL
AWFAWKITT I must dive into the sack in case the golf club will be open in the morning nite all!
As a betting man I said before that it was odds on that you would not depart the forums Finto.
Do you think it odds on that Australia will win the Ashes ?
banjo
This message has been edited since posting. Last time this message was edited on 17. December 2010 @ 20:38
|
|
CFC123
Junior Member
|
18. December 2010 @ 07:31 |
Link to this message
|
|
Why can't I get sky sports in the morning, turn on to see the cricket (for what it is worth) but no signal, SS comes on later, do I need to do a rescan?
Cheers
|
|
EAMO_TOO
Senior Member
|
18. December 2010 @ 07:35 |
Link to this message
|
Originally posted by CFC123:
Why can't I get sky sports in the morning, turn on to see the cricket (for what it is worth) but no signal, SS comes on later, do I need to do a rescan?
Cheers
Need to give more detail, what box are you using, is latest firmware on the box, etc.
|
|
djldan
Junior Member
|
18. December 2010 @ 14:43 |
Link to this message
|
Originally posted by CFC123:
Why can't I get sky sports in the morning, turn on to see the cricket (for what it is worth) but no signal, SS comes on later, do I need to do a rescan?
Cheers
I thought I would say for everyones benefit. I have had a Kryptview for aprox' 4-5 months, and in that time I have never had to do a reset, rescan, reboot or anything else that starts with a re. On occasions ( very rarely ) I may lose a channel for a short time. I dont panic, I take a deep breath, I sit back, and in time my patience is rewarded.....the channel comes back. The longest loss I ever had, was Racing UK, that went for a week. I did not however rescan to get it back.
My message for you all is- If you are constantly rescanning to retrieve channels then there must be something wrong with your kryptview box, or the way you have it setup.A reset, rescan, reboot, or anything else that starts with a re.....is not your answer.
Hope this helps.
|
|
CFC123
Junior Member
|
18. December 2010 @ 15:37 |
Link to this message
|
Originally posted by djldan:
Originally posted by CFC123:
Why can't I get sky sports in the morning, turn on to see the cricket (for what it is worth) but no signal, SS comes on later, do I need to do a rescan?
Cheers
I thought I would say for everyones benefit. I have had a Kryptview for aprox' 4-5 months, and in that time I have never had to do a reset, rescan, reboot or anything else that starts with a re. On occasions ( very rarely ) I may lose a channel for a short time. I dont panic, I take a deep breath, I sit back, and in time my patience is rewarded.....the channel comes back. The longest loss I ever had, was Racing UK, that went for a week. I did not however rescan to get it back.
My message for you all is- If you are constantly rescanning to retrieve channels then there must be something wrong with your kryptview box, or the way you have it setup.A reset, rescan, reboot, or anything else that starts with a re.....is not your answer.
Hope this helps.
OK fair enough, you are probably correct would just like to catch up with the cricket when I get up but this seems to be the only time it is a problem.
|
|
EAMO_TOO
Senior Member
|
19. December 2010 @ 05:59 |
Link to this message
|
Originally posted by CFC123:
OK fair enough, you are probably correct would just like to catch up with the cricket when I get up but this seems to be the only time it is a problem.
The title of this thread is Kryptview Starview so unless you specify which box you have how
is any one going to help you. Also have a look at syst.info in menu to see what firmware is
on the box. It would help if you posted which Net.ID you used when scanning,Prov.name & your
general location. Are all pay channels scrambled in the mornings or only SS 1.
|
|
CFC123
Junior Member
|
19. December 2010 @ 06:44 |
Link to this message
|
Originally posted by EAMO_TOO:
Originally posted by CFC123:
OK fair enough, you are probably correct would just like to catch up with the cricket when I get up but this seems to be the only time it is a problem.
The title of this thread is Kryptview Starview so unless you specify which box you have how
is any one going to help you. Also have a look at syst.info in menu to see what firmware is
on the box. It would help if you posted which Net.ID you used when scanning,Prov.name & your
general location. Are all pay channels scrambled in the mornings or only SS 1.
Sorry I am rather new to all this, my box is a KV A780 pv 3.6.00 and it showing version as V 3.0.0 in the menu. I cannot remember which Net.ID I used but I am in the Harlow area
|
|
EAMO_TOO
Senior Member
|
19. December 2010 @ 10:22 |
Link to this message
|
Originally posted by CFC123:
Sorry I am rather new to all this, my box is a KV A780 pv 3.6.00 and it showing version as V 3.0.0 in the menu. I cannot remember which Net.ID I used but I am in the Harlow area
Go into MENU--SETTINGS--S/W UPDATE. Click on it, it will either update or tell you it's
already up to date. If all channels are clearing & in correct order you probably have used
correct NET-ID. If not choose another ID close to your area & fac. reset then auto-scan.If you
have prov.box look in menu & it will show correct NET-ID.
Do you power-off box or router at night, this may cause delay in morning connecting box to net.
As asked already are all channs. scrambled or only SS
|
AfterDawn Addict
3 product reviews
|
19. December 2010 @ 12:58 |
Link to this message
|
Originally posted by CFC123:
multi posting is not helping all it is going to do is get the thread closed stick to one or the other threads
|
|
CFC123
Junior Member
|
21. December 2010 @ 12:43 |
Link to this message
|
Originally posted by EAMO_TOO:
Originally posted by CFC123:
Sorry I am rather new to all this, my box is a KV A780 pv 3.6.00 and it showing version as V 3.0.0 in the menu. I cannot remember which Net.ID I used but I am in the Harlow area
Go into MENU--SETTINGS--S/W UPDATE. Click on it, it will either update or tell you it's
already up to date. If all channels are clearing & in correct order you probably have used
correct NET-ID. If not choose another ID close to your area & fac. reset then auto-scan.If you
have prov.box look in menu & it will show correct NET-ID.
Do you power-off box or router at night, this may cause delay in morning connecting box to net.
As asked already are all channs. scrambled or only SS
Dear EAMO
Very grateful for your help have carried out all your advice and so far so good. Thank you it is very much appreciated.
CFC123
|
|
helpme3
Junior Member
|
22. December 2010 @ 07:21 |
Link to this message
|
|
some channels miussing ahve been for bout a week now anybody else having same issue. mostly the +1 channels si-fi bravo all discovery etc. any idea why or whats causing it now????
|
|
EAMO_TOO
Senior Member
|
22. December 2010 @ 11:24 |
Link to this message
|
Originally posted by helpme3:
some channels miussing ahve been for bout a week now anybody else having same issue. mostly the +1 channels si-fi bravo all discovery etc. any idea why or whats causing it now????
Make sure latest firmware is on box
You can try turning off router & box,restart router then box
Or fac-reset & re-scan using correct net-id
|
AfterDawn Addict
3 product reviews
|
22. December 2010 @ 16:06 |
Link to this message
|
Originally posted by helpme3:
some channels miussing ahve been for bout a week now anybody else having same issue. mostly the +1 channels si-fi bravo all discovery etc. any idea why or whats causing it now????
Hopefully they will all be back by the weekend so bare with them so dont keep scanning as they wont come in until they are sorted.
|
|
CFC123
Junior Member
|
23. December 2010 @ 15:04 |
Link to this message
|
Originally posted by e45:
Originally posted by CFC123:
multi posting is not helping all it is going to do is get the thread closed stick to one or the other threads
Not sure what you mean I did not mean to upset anyone or compromise the thread.
|
|
overhill
Junior Member
|
23. December 2010 @ 19:16 |
Link to this message
|
Hi all,
Was about to tell the model name of the value 50 inch tele I bought in Ireland for the family for Christmas, one in U.K. has freeview and freesat built in not so in Ireland slightly diff spec but other apps instead. Discounted as new model out soon. A few must still be available discounted in U.K. Just unbelievable value. Afraid to say which model as might compromise the thread.
Watching kryptview or starview on this this baby as I cant do, would blow you away.
Come on England in the next test.
Happy Christmas all.
banjo
|
|
Advertisement
|
|
|
AfterDawn Addict
3 product reviews
|
24. December 2010 @ 12:35 |
Link to this message
|
|
Not a problem feel free to post what you want as this is an open and free forum
|
