|
Starview usb 4 Fix (we're all doomed, doomed i say)
|
|
|
Starview posts only, No Kryptview posts Allowed.
|
AfterDawn Addict
3 product reviews
|
25. June 2009 @ 15:44 |
Link to this message
|
Originally posted by eiregal:
Hey, need some help here. Have downloaded the fix and tried to install it onto the box. It's reaching 100% but the screen has now frozen on that page. It says not to cut the power as it could seriously damage the box. EXIT on the remote doesn't do anything, nor does OK. Help anyone?!
which fix the one i just posted or the beta 1
|
|
Advertisement
|
 |
|
|
|
eiregal
Junior Member
|
25. June 2009 @ 15:48 |
Link to this message
|
|
Not too sure, not too savvy when it comes to things like this! First I tried the BETA one which was a .rar file but it didn't do anything in the box when I pressed ok on the remote. I deleted that from the stick and the one I'm trying now is a .bin file. That any help?
|
AfterDawn Addict
3 product reviews
|
25. June 2009 @ 15:58 |
Link to this message
|
Originally posted by eiregal:
Not too sure, not too savvy when it comes to things like this! First I tried the BETA one which was a .rar file but it didn't do anything in the box when I pressed ok on the remote. I deleted that from the stick and the one I'm trying now is a .bin file. That any help?
ok take your usb stick out of the box and see what happens then download this fix http://www.4shared.com/dir/17021639/1d7b8d51/sharing.html and put it on your memory stick and download it on your box, but before that when you take the usb stick out of the back of your box it should give you controle back if not turn it of an the back and back on let me know how you get on
|
AfterDawn Addict
3 product reviews
|
25. June 2009 @ 16:00 |
Link to this message
|
Originally posted by eiregal:
Not too sure, not too savvy when it comes to things like this! First I tried the BETA one which was a .rar file but it didn't do anything in the box when I pressed ok on the remote. I deleted that from the stick and the one I'm trying now is a .bin file. That any help?
just sent you a pm
|
|
eiregal
Junior Member
|
25. June 2009 @ 16:06 |
Link to this message
|
|
Cheers for the PM, will try it and see how I get on. Thanks again.
|
AfterDawn Addict
|
25. June 2009 @ 16:11 |
Link to this message
|
inserting or removing usb stick can damage ur box if box is powered on.
|
|
eiregal
Junior Member
|
25. June 2009 @ 16:16 |
Link to this message
|
|
Tried it, downloaded the fix you just posted and it seemed to work fine. Did an automatic scan and it found the channels but it's only giving me blank screens. Says no signal. Tried switching keycode to On but still no luck.
|
AfterDawn Addict
3 product reviews
|
25. June 2009 @ 16:21 |
Link to this message
|
Originally posted by eiregal:
Tried it, downloaded the fix you just posted and it seemed to work fine. Did an automatic scan and it found the channels but it's only giving me blank screens. Says no signal. Tried switching keycode to On but still no luck.
you must have the cable in the wrong input its the one furthest away from the scart that says cable input 'up the top'
try that and let me know
|
|
dougbarns
Newbie
|
25. June 2009 @ 16:24 |
Link to this message
|
just uploaded the new fix for the usb.Thanks hooter and all the techno dudes for all the help you give to all us technophobes over a long time.We forget to thank you as often as we should!
|
|
eiregal
Junior Member
|
25. June 2009 @ 16:25 |
Link to this message
|
It's definitely in the right one. Cable is going from the RF Out on the n*l box into the Cable Input on the Starview box.
|
AfterDawn Addict
|
25. June 2009 @ 16:26 |
Link to this message
|
|
did u do a fresh scan after flashing box,scan for channels,keycode to on and set default key will make it update.
dont scan thru other box,always scan straight from wall to cable input.
This message has been edited since posting. Last time this message was edited on 25. June 2009 @ 16:28
|
|
eiregal
Junior Member
|
25. June 2009 @ 16:32 |
Link to this message
|
Here's what I did; put the firmware on it, it rebooted, I did a factory reset, scanned for channels, it found loads of channels, I put keycode to On, selected default key and exited to channels. No luck. Can get RTE 1 but nothing else.
|
AfterDawn Addict
3 product reviews
|
25. June 2009 @ 16:34 |
Link to this message
|
Originally posted by eiregal:
It's definitely in the right one. Cable is going from the RF Out on the n*l box into the Cable Input on the Starview box.
when you say rf out on n*l box do you mean there actual box if so disconect the other box and put the cable straight (direct) in to your box super (cable input) and make sure your scart is in proper,
let us know how you get on.
|
AfterDawn Addict
3 product reviews
|
25. June 2009 @ 16:35 |
Link to this message
|
Originally posted by eiregal:
Here's what I did; put the firmware on it, it rebooted, I did a factory reset, scanned for channels, it found loads of channels, I put keycode to On, selected default key and exited to channels. No luck. Can get RTE 1 but nothing else.
|
AfterDawn Addict
3 product reviews
|
25. June 2009 @ 16:36 |
Link to this message
|
Originally posted by eiregal:
Here's what I did; put the firmware on it, it rebooted, I did a factory reset, scanned for channels, it found loads of channels, I put keycode to On, selected default key and exited to channels. No luck. Can get RTE 1 but nothing else.
it takes about 10-20 min for the chanells to update
|
|
eiregal
Junior Member
|
25. June 2009 @ 16:39 |
Link to this message
|
Right, I'm a little lost! I should mention that we have MMDS here so I can't put the cable straight into the Starview box, it has to go through the N*L box. Make sense?
|
AfterDawn Addict
3 product reviews
|
25. June 2009 @ 16:45 |
Link to this message
|
Originally posted by dougbarns:
just uploaded the new fix for the usb.Thanks hooter and all the techno dudes for all the help you give to all us technophobes over a long time.We forget to thank you as often as we should!
no need to thank me mate just pass that new firmware around to your mates who are still missing chanells, that firmware is only for ireland .
|
AfterDawn Addict
|
25. June 2009 @ 16:47 |
Link to this message
|
Originally posted by hooter007:
Originally posted by eiregal:
Not too sure, not too savvy when it comes to things like this! First I tried the BETA one which was a .rar file but it didn't do anything in the box when I pressed ok on the remote. I deleted that from the stick and the one I'm trying now is a .bin file. That any help?
ok take your usb stick out of the box and see what happens then download this fix http://www.4shared.com/dir/17021639/1d7b8d51/sharing.html and put it on your memory stick and download it on your box, but before that when you take the usb stick out of the back of your box it should give you controle back if not turn it of an the back and back on let me know how you get on
hooter that file is not the firmware fix that you have linked to? The latest fix was in Eamos from the time of release.
This file you have linked may brick a working SV4. Even the working Beta fix will kill a clone SV4.
|
AfterDawn Addict
|
25. June 2009 @ 16:49 |
Link to this message
|
Originally posted by eiregal:
Right, I'm a little lost! I should mention that we have MMDS here so I can't put the cable straight into the Starview box, it has to go through the N*L box. Make sense?
Is your power inserter plugged in? Are you sure you are on N** MMDS?
|
AfterDawn Addict
3 product reviews
|
25. June 2009 @ 16:50 |
Link to this message
|
Originally posted by eiregal:
Right, I'm a little lost! I should mention that we have MMDS here so I can't put the cable straight into the Starview box, it has to go through the N*L box. Make sense?
it does make sence yeh does any of the other chanells even say updating eg:if you went to s*y movies ch no 301
|
|
shaun1733
Member
|
25. June 2009 @ 16:54 |
Link to this message
|
|
you dont go through the ntl box go straight into starveiw mmds does not make a difference
|
|
eiregal
Junior Member
|
25. June 2009 @ 16:56 |
Link to this message
|
|
What's a power inserter?! None of the channels say updating. The green bar on each of the channels is full when the channel is viewed.
|
AfterDawn Addict
|
25. June 2009 @ 16:57 |
Link to this message
|
eiregal's box will not work if he is on Ch**us MMDS. MMDS also requires a power insertor and not having the correct firmware will not help.
|
AfterDawn Addict
|
25. June 2009 @ 16:59 |
Link to this message
|
Originally posted by eiregal:
What's a power inserter?! None of the channels say updating. The green bar on each of the channels is full when the channel is viewed.
A powerinserter is the little black box beside your TV. One coax goes to your TV and the other goes to the antenna. But you need to tell us are you on N** or Ch**us MMDS as I said above.
Plus you need the correct firmware.
|
|
Advertisement
|
|
|
|
shaun1733
Member
|
25. June 2009 @ 17:01 |
Link to this message
|
|
lads can someone explain what you mean a power inserter
|
