|
|
|
Simulation OK, but burn fails
|
|
|
bobus1964
Newbie
|
8. October 2004 @ 20:50 |
Link to this message
|
|
Simulation runs OK but burn fails at 2x
Before last coaster creation , I had defragged drive, turned off virus scan; dropped burn speed to 2x rather than 4x to be safe, and ran the simualtion. I still got burned failed at 2X just afetr the burn started .
Using Maxell MXLRG02 DVD-R (digitalfaq says that it is 1st class media )
Using DVD shrink and Nero 6.0.0.0
LG 4081b with Ver. A104 firmware (latest)set as master on secondary IDE
Does the DVD player require periodic cleaning? If so, how?
All I can think to do is reinstall Nero at this point?
Any ideas?
Any help is greatly appreciated.
Here's the log file .....
Windows 2000 5.0
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.57 (1008), size=48128 bytes, created 12/04/2000 8:39:44 PM
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.56, size=163910 bytes, created 02/04/2003 8:13:44 AM
Nero version: 6.0.0.0
Recorder: <HL-DT-ST DVDRAM GSA-4081B>Version: A104 - HA 1 TA 0 - 6.0.0.0
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: <HL-DT-ST DVD-ROM GDR8162B>Version: 0015 - HA 0 TA 1 - 6.0.0.0
Adapter driver: <atapi> HA 0
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y080L0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVD-ROM GDR8162B atapi Port 0 ID 1 DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4081B atapi Port 1 ID 0 DMA: On
=======================
AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 511MB (523764kB)
Free physical memory: 254MB (260224kB)
Memory in use : 50 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
8.10.2004
DVD-Video
10:54:59 PM #1 Phase 112 File dlgbrnst.cpp, Line 1818
DVD-Video files reallocation started
10:54:59 PM #2 Phase 114 File dlgbrnst.cpp, Line 1818
DVD-Video files reallocation completed (no file modified)
10:54:59 PM #3 Text 0 File Isodoc.cpp, Line 5451
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : TRUE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
10:54:59 PM #4 Phase 111 File dlgbrnst.cpp, Line 1818
DVD-Video files sorted
10:54:59 PM #5 Text 0 File Reader.cpp, Line 118
Reader running
10:54:59 PM #6 Text 0 File Writer.cpp, Line 127
Writer HL-DT-ST DVDRAM GSA-4081B running
10:54:59 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3814
First writeable address = 0 (0x00000000)
10:54:59 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3814
First writeable address = 0 (0x00000000)
10:54:59 PM #9 Text 0 File Burncd.cpp, Line 3081
Turn on Disc-at-once, using DVD media
10:54:59 PM #10 Text 0 File DlgWaitCD.cpp, Line 224
Last possible write address on media: 2298495 (510:46.45)
Last address to be written: 2286143 (508:01.68)
10:54:59 PM #11 Text 0 File DlgWaitCD.cpp, Line 229
Write in overburning mode: FALSE
10:54:59 PM #12 Text 0 File DlgWaitCD.cpp, Line 1688
Recorder: HL-DT-ST DVDRAM GSA-4081B, Media type: DVD-R
Disc Manufacturer: MXL RG - 02
Disc Application Code: 64, Disc Physical Code: 193
10:54:59 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 757
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 2286144 (2286144) = #2286144/508:1.69
relocatable, CD pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286144 blocks [HL-DT-ST DVDRAM GSA-4081B]
--------------------------------------------------------------
10:54:59 PM #14 Text 0 File Burncd.cpp, Line 3318
Recorder and media-info
=======================
Burning to HL-DT-ST DVDRAM GSA-4081B on a DVD-R media
10:54:59 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 910
Prepare recorder HL-DT-ST DVDRAM GSA-4081B for write in cue-sheet-DAO
DAO infos:
==========
MCN:
TOCTYPE: 0x0 Session Closed, CD fixated
Tracks 1 to 1:
TRM_DATA_MODE1, 2048/0x0, ISRC "", FilePos 0 307200 387362816
10:54:59 PM #16 Phase 24 File dlgbrnst.cpp, Line 1818
Caching of files started
10:54:59 PM #17 Phase 25 File dlgbrnst.cpp, Line 1818
Caching of files completed
10:54:59 PM #18 Phase 32 File dlgbrnst.cpp, Line 1818
Simulation started at 2x (2,760 KB/s)
10:54:59 PM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2104
Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #0
10:55:00 PM #20 Text 0 File dlgbrnst.cpp, Line 1678
Set remaining time: 28:15,570 (1695570ms) -> OK
10:55:00 PM #21 Text 0 File DVDR.cpp, Line 1407
Recording mode: Sequential Recording Mode
10:55:00 PM #22 Text 0 File Mmc.cpp, Line 18119
Set BUFE: supported -> ON
10:55:00 PM #23 Text 0 File DVDR.cpp, Line 1522
Start write address at LBA 0
DVD high compatibility mode: Yes
10:55:00 PM #24 Text 0 File Cdrdrv.cpp, Line 7827
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Media Specific:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
02 FE 10 00 02 FF A0 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
10:55:01 PM #25 Text 0 File Writer.cpp, Line 318
22:55:01.988 - HL-DT-ST DVDRAM GSA-4081B : Queue again later (Intervall : 23msec)
11:23:52 PM #26 Text 0 File WriterStatus.cpp, Line 112
<HL-DT-ST DVDRAM GSA-4081B> start writing Lead-Out at LBA 2286144 (22E240h), lenght 0 blocks
11:23:52 PM #27 Text 0 File ThreadedTransfer.cpp, Line 227
all writers idle, stopping conversion
11:24:28 PM #28 Text 0 File dlgbrnst.cpp, Line 1678
Set remaining time: 0:00,000 (0ms) -> OK
11:24:28 PM #29 Text 0 File dlgbrnst.cpp, Line 1678
Set remaining time: 0:00,000 (0ms) -> OK
11:24:28 PM #30 Phase 33 File dlgbrnst.cpp, Line 1818
Simulation completed successfully at 2x (2,760 KB/s)
11:24:28 PM #31 Phase 36 File dlgbrnst.cpp, Line 1818
Burn process started at 2x (2,760 KB/s)
11:24:28 PM #32 Text 0 File ThreadedTransferInterface.cpp, Line 2104
Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #0
11:24:28 PM #33 Text 0 File dlgbrnst.cpp, Line 1678
Set remaining time: 28:15,570 (1695570ms) -> OK
11:24:28 PM #34 Text 0 File DVDR.cpp, Line 1407
Recording mode: Sequential Recording Mode
11:24:28 PM #35 Text 0 File Mmc.cpp, Line 18119
Set BUFE: supported -> ON
11:24:29 PM #36 Text 0 File DVDR.cpp, Line 1522
Start write address at LBA 0
DVD high compatibility mode: Yes
11:24:29 PM #37 Text 0 File Cdrdrv.cpp, Line 7827
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 25E23F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Media Specific:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
11:24:34 PM #38 Text 0 File Writer.cpp, Line 318
23:24:34.757 - HL-DT-ST DVDRAM GSA-4081B : Queue again later (Intervall : 23msec)
11:24:42 PM #39 SCSI -1061 File Cdrdrv.cpp, Line 1361
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x09770000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x44
Sense Qual: 0x86
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x04 0x00 0x00 0x00 0x00 0x10
0x32 0x24 0x04 0x0C 0x44 0x86
11:24:42 PM #40 CDR -1061 File Writer.cpp, Line 335
Internal target failure
11:24:42 PM #41 Text 0 File ThreadedTransfer.cpp, Line 227
all writers idle, stopping conversion
11:24:43 PM #42 Text 0 File ThreadedTransfer.cpp, Line 221
conversion idle, stopping reader
11:24:44 PM #43 Text 0 File dlgbrnst.cpp, Line 1678
Set remaining time: 0:00,000 (0ms) -> OK
11:24:44 PM #44 Text 0 File dlgbrnst.cpp, Line 1678
Set remaining time: 0:00,000 (0ms) -> OK
11:24:44 PM #45 Phase 38 File dlgbrnst.cpp, Line 1818
Burn process failed at 2x (2,760 KB/s)
Existing drivers:
File 'Drivers\CDR4_2K.SYS': Ver=5.3.2.31, size=58000 bytes, created 08/12/2003 9:28:47 PM
File 'Drivers\CDRALW2K.SYS': Ver=5.3.2.31, size=23420 bytes, created 08/12/2003 9:28:47 PM
File 'Drivers\ASPI32.SYS': Ver=4.57 (1008), size=23936 bytes, created 12/04/2000 8:39:38 PM
File 'Drivers\atapi.sys': Ver=5.00.2195.6699, size=86672 bytes, created 19/06/2003 3:05:04 PM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
|
|
Veblin
Senior Member
|
8. October 2004 @ 21:22 |
Link to this message
|
Nero version: 6.0.0.0
Update Nero.
Current version: 6.3.1.25
|
|
bobus1964
Newbie
|
10. October 2004 @ 12:32 |
Link to this message
|
Upgraded to Nero latest version (demo ) and managed to burn next disc okay
I defragged again and it burned the burned the next one I tried .
...it then went back to making intermittent coasters .
I tried using different media that I had (Sonyd04) It burned the next one okay.
...it then went back to making intermittent coasters .
Defragged , tied again ...
Getting either "Internal target failure" ot "Focus or tracking error"
I previously used several 50 Memorex spindles with not one coaster, and then all of as sudden, the drive started to be flaky.
I updated firmware, defragged and have gone to latest Nero version. I tried different media and its still hit or miss.
Considering the use I put it to, can you wear out a DVD burner?
Latest log is below ....
1
1
Windows 2000 5.0
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.57 (1008), size=48128 bytes, created 12/04/2000 8:39:44 PM
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 22/07/2004 5:33:44 PM
Nero version: 6.3.1.25
Recorder: <HL-DT-ST DVDRAM GSA-4081B>Version: A104 - HA 1 TA 0 - 6.3.1.25
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <HL-DT-ST DVD-ROM GDR8162B>Version: 0015 - HA 0 TA 1 - 6.3.1.25
Adapter driver: <atapi> HA 0
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y080L0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVD-ROM GDR8162B atapi Port 0 ID 1 DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4081B atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
HL-DT-ST DVD-ROM GDR8162 D: CDRom0
HL-DT-ST DVDRAM GSA-4081 E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523764kB)
Free physical memory: 305MB (312544kB)
Memory in use : 40 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
10.10.2004
UDF/ISO compilation
3:57:49 PM #1 Phase 112 File dlgbrnst.cpp, Line 1855
DVD-Video files reallocation started
3:57:49 PM #2 Phase 114 File dlgbrnst.cpp, Line 1855
DVD-Video files reallocation completed (no file modified)
3:57:49 PM #3 Text 0 File Isodoc.cpp, Line 6083
Iso document burn settings
------------------------------------------
Determine maximum speed : TRUE
Simulate : TRUE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
3:57:49 PM #4 Phase 111 File dlgbrnst.cpp, Line 1855
DVD-Video files sorted
3:57:49 PM #5 Text 0 File Reader.cpp, Line 126
Reader running
3:57:49 PM #6 Text 0 File Writer.cpp, Line 124
Writer HL-DT-ST DVDRAM GSA-4081B running
3:57:49 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)
3:57:49 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)
3:57:49 PM #9 Text 0 File Burncd.cpp, Line 3152
Turn on Disc-at-once, using DVD media
3:57:50 PM #10 Text 0 File DlgWaitCD.cpp, Line 247
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2286111 (508:01.36, 4465MB)
3:57:50 PM #11 Text 0 File DlgWaitCD.cpp, Line 259
Write in overburning mode: NO (enabled: CD)
3:57:50 PM #12 Text 0 File DlgWaitCD.cpp, Line 2162
Recorder: HL-DT-ST DVDRAM GSA-4081B, Media type: DVD-R
Disc Manufacturer: SONY04 - D1
Disc Application Code: 64, Disc Physical Code: 193
3:57:50 PM #13 Text 0 File DlgWaitCD.cpp, Line 420
>>> Protocol of DlgWaitCD activities: <<<
=========================================
3:57:50 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 2286112 (2286112) = #2286112/508:1.37
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286112 blocks [HL-DT-ST DVDRAM GSA-4081B]
--------------------------------------------------------------
3:57:50 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [HL-DT-ST DVDRAM GSA-4081B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681957376, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2286112 | lead-out | 1 | 0x00 | 0x41
3:57:50 PM #16 Phase 24 File dlgbrnst.cpp, Line 1855
Caching of files started
3:57:50 PM #17 Text 0 File Burncd.cpp, Line 4163
Cache writing successful.
3:57:50 PM #18 Phase 25 File dlgbrnst.cpp, Line 1855
Caching of files completed
3:57:50 PM #19 Phase 28 File dlgbrnst.cpp, Line 1855
Speed measurement started
3:57:50 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
3:59:25 PM #21 Text 0 File WriterStatus.cpp, Line 115
<HL-DT-ST DVDRAM GSA-4081B> start writing Lead-Out at LBA 2286112 (22E220h), lenght 0 blocks
3:59:25 PM #22 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
3:59:25 PM #23 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 0:00,000 (0ms) -> OK
3:59:25 PM #24 Phase 29 File dlgbrnst.cpp, Line 1806
Speed measurement completed: 35.2x (48,600 KB/s)
3:59:25 PM #25 Phase 32 File dlgbrnst.cpp, Line 1855
Simulation started at 4x (5,540 KB/s)
3:59:25 PM #26 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
3:59:25 PM #27 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 14:10,273 (850273ms) -> OK
3:59:25 PM #28 Text 0 File DVDR.cpp, Line 2000
Recording mode: Sequential Recording Mode
3:59:26 PM #29 Text 0 File Mmc.cpp, Line 20660
Set BUFE: supported -> ON
3:59:26 PM #30 Text 0 File DVDR.cpp, Line 2141
Start write address at LBA 0
DVD high compatibility mode: Yes
3:59:26 PM #31 Text 0 File Cdrdrv.cpp, Line 8230
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
3:59:27 PM #32 Text 0 File Cdrdrv.cpp, Line 1297
15:59:27.759 - HL-DT-ST DVDRAM GSA-4081B\H1 T0 : Queue again later
4:00:12 PM #33 SCSI -1039 File Cdrdrv.cpp, Line 1445
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x09780000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x09
Sense Qual: 0x01
CDB Data: 0x2A 0x00 0x00 0x00 0xE3 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x04 0x00 0x00 0x00 0x00 0x10
0x32 0x34 0x04 0x0C 0x09 0x01
4:00:12 PM #34 CDR -1039 File Writer.cpp, Line 304
Focus or tracking error
4:00:13 PM #35 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
4:00:13 PM #36 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader
4:00:13 PM #37 Text 0 File DVDR.cpp, Line 2383
EndDAO: Last written address was 58111
4:00:13 PM #38 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 0:00,000 (0ms) -> OK
4:00:13 PM #39 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 0:00,000 (0ms) -> OK
4:00:13 PM #40 Phase 34 File dlgbrnst.cpp, Line 1855
Simulation failed at 4x (5,540 KB/s)
Existing drivers:
File 'Drivers\CDR4_2K.SYS': Ver=5.3.2.31, size=58000 bytes, created 08/12/2003 9:28:47 PM
File 'Drivers\CDRALW2K.SYS': Ver=5.3.2.31, size=23420 bytes, created 08/12/2003 9:28:47 PM
File 'Drivers\ASPI32.SYS': Ver=4.57 (1008), size=23936 bytes, created 12/04/2000 8:39:38 PM
File 'Drivers\atapi.sys': Ver=5.00.2195.6699, size=86672 bytes, created 19/06/2003 3:05:04 PM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
|
