Video to DVD/CD

Advertise at AfterDawn.com

Link to us!

Private messages

Compose a private message

List of all updated threads

Threads without replies

Search messages

Friday 27.2.2026 / 14:36

Search AfterDawn Forums:

afterdawn.com > forums > dvd±r discussion > dvd±r for newbies > video to dvd/cd

Browse by topic

Forums

Start a new thread

Video to DVD/CD

Jump to:

Posted

Message

Gran-Pa

Newbie

10. December 2004 @ 04:19

Link to this message

Can any one please tell me where I can find out how to copy from my video pleyer to my computer and from there to CD or DVD. I do need to know how in minute detail, i.e what lead plugs into where. Also how to record from the TV to computer and is it possible to set a timer to start recording.
Many thanks

[ + quote]

Adavis

Junior Member

10. December 2004 @ 11:09

Link to this message

I'm only venturing into Capture myself but i have quite a complex setup so i'll outline the basic for you and hope that helps

I'm using:

WinXP/ATI RADEON 9000PRO 128MB GRAPHICS CARD/AC97SOUND/Xpert Internal TV-PVR PCI Card

First of all you'll need a good graphics setup. I'd recommend a Graphics card with at least 128mb, however you can get away with just a TV capture card. The 1 i use above has S-Video/composite input jacks so i can send the signal from my video player into my computer. It also has seperate tv/fm antenna jacks for direct tv reception and auto-tuning.

At present i have my graphics card(with s-video out socket) plugged into an s-video-composite converter, which came with the card. that(yellow cable) plugs into the scart converter on my video and then the two audio jacks(red/white) come out from that into the audio sockets on my computer.

If you only have 1 audio jack on your computer you can get away with using a cable that joins left/righ audio from the video player however the sound quality will suffer without a sound card....i recommend u have at least ac97 sound chip.

If all that confused the hell out of you just remember that its about connecting 1 piece of hardware to another. The software comes later- using converters/scart sockets etc makes this possible unless you have an s-video compliant video recorder. Oh and theres 1 more little pain in the ass to get around...Macrovision, but i won't get into that here.

[ + quote]

Gran-Pa

Newbie

11. December 2004 @ 06:12

Link to this message

Thanks, I THINK I understand what you're saying, only one way to find out, suck it and see.

[ + quote]

Adavis

Junior Member

13. December 2004 @ 08:45

Link to this message

The hardest part for me was figuring out all the audio in/out connections(usually documented in the computer manual or on the back of you pc). Remember that with any capture card you'll be inputting audio from some source, i.e TV or Video and Ouputting from you Computer as well.

I suggest if you settle on a card you also check that you have all the right cables for this as well and if converting from video make sure you use Gold plated connections - nothing worse that hearing that annoying buzz all the time.

[ + quote]

Start a new thread

afterdawn.com > forums > dvd±r discussion > dvd±r for newbies > video to dvd/cd


		User name	Password

		Not registered yet? Register here. Lost your password? Click here.