|
Unable to burn DVD using Nero 6.3.1.25
|
|
|
cchapell
Newbie
|
10. December 2004 @ 15:43 |
Link to this message
|
|
Hey all I'm brand new to the whole dvd burning thing. When I try to burn my dvds I get all sorts of errors:
1. Session fixation error
2. Could not perform end of Disc-at-once
3. Burn process failed
I am using TDK DVD+R's and my burner is a philips DVD+-RW DVD8631
I've actually been able to burn about 3 minutes of a DVD but it always shows these errors. Can anyone shed some light on this matter. Thanks in advance!
|
|
Advertisement
|
 |
|
|
AfterDawn Addict
|
11. December 2004 @ 05:23 |
Link to this message
|
The simplest thing to do is perhaps first try DVD Shrink and DVD Decrypter, both free programs downloadble from this site. If they work, then forget about Nero. If the same errors keep coming up, then probably media problem.
By the way, Nero does not handle the CSS and region code problem by itself. So have you got those covered?
|
|
cchapell
Newbie
|
11. December 2004 @ 09:26 |
Link to this message
|
scf_au thanks for the help. I will try DVD Shrink tonight. I'm using DVD Cloner II to copy the movies to my hard drive and then using Nero to burn them to the DVD+R's. I'm pretty sure that DVD Cloner II handles the CSS but not sure about the region code.
Thanks again for the assistance, I will let you know if it works!
|
|
cchapell
Newbie
|
11. December 2004 @ 13:36 |
Link to this message
|
I used DVD Shrink and got this:
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 12/2/2004 8:42:19 PM
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 7/22/2004 5:33:44 PM
Nero API version: 6.3.1.25
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Recorder: <PHILIPS DVD+-RW DVD8631> Version: 9D03 - HA 0 TA 1 - 6.3.1.25
Adapter driver: <atapi> HA 0
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
=== Scsi-Device-Map ===
CdRomPeripheral : IDE DVD-ROM 16X atapi Port 0 ID 0 DMA: On
CdRomPeripheral : PHILIPS DVD+-RW DVD8631 atapi Port 0 ID 1 DMA: Off
DiskPeripheral : ST340014AS atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
IDE DVD-ROM 16X E: CDRom0
PHILIPS DVD+-RW DVD8631 D: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 510MB (522316kB)
Free physical memory: 163MB (167464kB)
Memory in use : 67 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
11.12.2004
NeroAPI
6:33:25 PM #1 Phase 112 File APIProgress.cpp, Line 273
DVD-Video files reallocation started
6:33:25 PM #2 Phase 114 File APIProgress.cpp, Line 273
DVD-Video files reallocation completed (no file modified)
6:33:25 PM #3 Phase 111 File APIProgress.cpp, Line 273
DVD-Video files sorted
6:33:25 PM #4 Text 0 File Reader.cpp, Line 126
Reader running
6:33:25 PM #5 Text 0 File AudioCompilationImpl.cpp, Line 817
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.
6:33:25 PM #6 Text 0 File Writer.cpp, Line 124
Writer PHILIPS DVD+-RW DVD8631 running
6:33:25 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)
6:33:25 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)
6:33:25 PM #9 Text 0 File Burncd.cpp, Line 3152
Turn on Disc-At-Once, using DVD media
6:33:25 PM #10 Text 0 File DlgWaitCD.cpp, Line 247
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2286111 (508:01.36, 4465MB)
6:33:25 PM #11 Text 0 File DlgWaitCD.cpp, Line 259
Write in overburning mode: NO
6:33:25 PM #12 Text 0 File DlgWaitCD.cpp, Line 2162
Recorder: PHILIPS DVD+-RW DVD8631, Media type: DVD+R
6:33:25 PM #13 Text 0 File DlgWaitCD.cpp, Line 420
>>> Protocol of DlgWaitCD activities: <<<
=========================================
6:33:25 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 2286112 (2286112) = #2286112/508:1.37
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286112 blocks [PHILIPS DVD+-RW DVD8631 ]
--------------------------------------------------------------
6:33:25 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [PHILIPS DVD+-RW DVD8631 ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681957376, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2286112 | lead-out | 1 | 0x00 | 0x41
6:33:26 PM #16 Phase 24 File APIProgress.cpp, Line 273
Caching of files started
6:33:26 PM #17 Text 0 File Burncd.cpp, Line 4163
Cache writing successful.
6:33:26 PM #18 Phase 25 File APIProgress.cpp, Line 273
Caching of files completed
6:33:26 PM #19 Phase 36 File APIProgress.cpp, Line 273
Burn process started at 16x (22,160 KB/s)
6:33:26 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
6:33:26 PM #21 SCSI -1066 File Cdrdrv.cpp, Line 1191
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x0AD46000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x12
0x00 0x00 0x00 0x00 0x24 0x00
6:33:26 PM #22 Text 0 File DVDPlusRW.cpp, Line 628
Start write address at LBA 0
DVD high compatibility mode: Yes
6:33:36 PM #23 SCSI -1015 File Cdrdrv.cpp, Line 1445
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x01750000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x12
0x00 0x00 0x00 0x00 0x73 0x02
6:33:36 PM #24 CDR -1015 File Writer.cpp, Line 304
Calibration area full
6:33:36 PM #25 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
6:33:36 PM #26 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader
6:33:36 PM #27 SCSI -1176 File Cdrdrv.cpp, Line 1191
SCSI Exec, HA 0, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x72
Sense Qual: 0x03
CDB Data: 0x5B 0x01 0x05 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x12
0x00 0x00 0x00 0x00 0x72 0x03
6:33:36 PM #28 Phase 127 File APIProgress.cpp, Line 273
Generating DVD high compatibility borders
6:33:36 PM #29 CDR -1176 File WriterStatus.cpp, Line 164
Session fixation error
6:33:36 PM #30 TRANSFER -24 File WriterStatus.cpp, Line 164
Could not perform end of Disc-at-once
6:33:36 PM #31 Phase 38 File APIProgress.cpp, Line 273
Burn process failed at 16x (22,160 KB/s)
6:33:36 PM #32 Text 0 File AudioCompilationImpl.cpp, Line 828
DRM: DRM burn session terminated.
6:33:36 PM #33 Text 0 File AudioCompilationImpl.cpp, Line 857
DRM: Closing entire DRM handling. Bye.
Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 3:07:32 PM
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 12/2/2004 8:42:19 PM
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
AfterDawn Addict
|
11. December 2004 @ 22:48 |
Link to this message
|
|
You're probably trying to burn at too fast a speed at 16x:
"6:33:26 PM #19 Phase 36 File APIProgress.cpp, Line 273
Burn process started at 16x (22,160 KB/s)"
Many people have reported problems when they go beyond 4x. I never burn over 2x (but have had 100% success).
Try burning at 2-4x with a rewritable to see how it goes.
Good luck!
|
AfterDawn Addict
|
11. December 2004 @ 23:08 |
Link to this message
|
|
PHILIPS DVD+-RW DVD8631 atapi Port 0 ID 1 DMA: Off
Would help a bunch if you set your Burner to DMA mode instead of PIO mode :-)
Also burning at x16 you are asking for nothing but trouble. There probably isnt a DVD player out there that could read the movie even if you were sucessful at burning that fast. Slow it down to x4
bbmayo
|
|
baabaa
AfterDawn Addict
|
11. December 2004 @ 23:23 |
Link to this message
|
|
@cchapell
According to your log, the DMA is off for your burner.
This maybe where your problem lies, especially as you are trying to burn at 'warp' speed.
Points to review:
Goto device manager
Click on IDE ATA/ATAPI controllers
Locate the channel that your burner is on
and go into advanced settings.
You should see that your burner is set to PIO mode
Change the transfer mode to DMA if available.
If you cannot change it, uninstall the Burner OR the IDE controller (right click on title) it is on and reboot, windows should reinstall it, and you should have returned to a DMA mode.
Then attempt to burn at 4x (as bbmayo sugested) and it should go through nicely.................
...............PIO is no go, DMA all the way...............
Beware of the Pixies - they move in over night and turn your life upside down
|
|
ccampbell
Senior Member
|
12. December 2004 @ 07:41 |
Link to this message
|
|
Also, in your log file it shows an error message of 'Callibration area full'. Before any write operation can occur, and during a write, the recorder does 15 calibration tests in the PMA area of the Disc, to determine the best power to be used at any given point on the disc. Meaning the begining, and throughout the write as what was good at the begining may not be good in the middle or end depending on how the dye was layed out.
This section where the calibration tests are written too are in the PMA or Program Memory Area, and this should never become 'Full'. Or to be exact, it would require a large number of small write operations to fill this area up, and is not likely to occur or even possible. So it can be a firmware issue, but in my experience it's always been a media issue.
Have you tried more than one brand of DVD media? You could just have a bad batch.
Regards,
Craig
Ahead Software
USA
|
|
cchapell
Newbie
|
12. December 2004 @ 15:05 |
Link to this message
|
|
Hey scf_au, bbmayo, baabaa and ccampbell
Thanks for all the help and info. I check my burner to make sure that DMA mode was selected, replaced my TDK DVD+R's for Fuji DVD-R's and I slowed my speed down to 4X and it worked! Your guys rule!!!!!! Thanks again
Happy Holidays to all!
|
|
baabaa
AfterDawn Addict
|
12. December 2004 @ 21:33 |
Link to this message
|
|
(bbmayo, you just nipped in there before me on the DMA, LOL)
Hee Hee............
baabaa, scf_au, bbmayo, ccampbell and cchapell join up for the conga...............
Off we go..................do do do c'mon and join the conga, do do do like a train across the floor................
...............PIO is no go, DMA all the way...............
Beware of the Pixies - they move in over night and turn your life upside down
This message has been edited since posting. Last time this message was edited on 12. December 2004 @ 21:35
|
|
innsoh
Newbie
|
19. January 2005 @ 18:05 |
Link to this message
|
|
Hi, i have the same problem but i cannot see how to turn on DMA ....it always fails copying Dvds..
Inn Soh
|
|
Veblin
Senior Member
|
19. January 2005 @ 18:12 |
Link to this message
|
|
|
|
innsoh
Newbie
|
19. January 2005 @ 18:19 |
Link to this message
|
|
ok I see that mine is DMA if availble.. But it was already selected and I try to copy and give me write error ... can be the dvdr? Thank you so\much i just got a dell desktop and i m having trouble with this
Inn Soh
|
|
smarty23
Suspended due to non-functional email address
|
15. February 2005 @ 21:13 |
Link to this message
|
I have been a very similar problem with my Phillips DVD+-RW DVD8631 in my new Dimension 4700. I wanted to back up my DVD's so I bought DVD ClonerII. This software does not show or detect my DVD RW as a "target" drive. Their tech support stated that I should burn to the hard drive then use Nero 6 to burn to the DVD RW.
I tried this and Nero 6 stated that the DVD in the RW drive had to be a dual layer DVD to write. I did purchase a DL disc but and it worked, but these DVD's are very cost prohibitive.
With the DVD ClonerII I made sure that the software was not copying to the "D9" format. All the DVD's I have copied to my hard drive are under the 4.7 Gb limit. So it looks like DVD Cloner II is copying it right to the hard drive.
Their tech support stated to make sure not to copy the D9 format which I have not done.
I am using TDK DVD+R media.
Any suggestions?
|
|
cchapell
Newbie
|
16. February 2005 @ 05:29 |
Link to this message
|
Hey smarty23 I started this thread and here is what worked for me. I have the same burner, the same software and was using the same TDK DVD+Rs. First I uninstalled Nero and the sonic burning software that came with the PC. Secondly I switched to Fuji DVD-Rs. Once I did this, DVD Cloner II was able to see the target drive and the source. My back-ups have been flawless! Hope this helps!!! Good luck.
|
|
smarty23
Suspended due to non-functional email address
|
16. February 2005 @ 07:01 |
Link to this message
|
|
cchapell - I'll try that tonight, thanks. It has been frustrating between Dell and DVD ClonerII tech support. I'll get back to you if it works. Thanks again.
|
|
smarty23
Suspended due to non-functional email address
|
17. February 2005 @ 07:45 |
Link to this message
|
Success! In a nut shell, the Phillips DVD+-RW DVD8631 did not like the TDK+R dvd's. I assume it was this conflict that signaled Nero to prompt me to use the DL DVD's. I did uninstall the Sonic software but not the Nero software.
Using the Fuji DVD-R disc's it writes with ease (with Nero). I still have my original problem with DVD ClonerII not showing a target drive for the writer. BUT it is working so I am happy now.
Thanks again cchapell.
|
|
innsoh
Newbie
|
3. March 2005 @ 10:46 |
Link to this message
|
|
I used DVD-R fugifilm and it worls perfectly! I didn t missed one copy . Thank you all
Inn Soh
|
|
nc4moz
Newbie
|
17. March 2005 @ 02:02 |
Link to this message
|
|
hi guys...consider me to be total computer novice...just bought the dell 3000 inspiron desktop. Trying to burn data DVD's via sonic and get the following error "Please insert a blank or rewritable disc into the philips DVDRW8631".
I have mutliple brands and multiple types both + and - but nothing seems to work...have also set my cd speed to 2x.
any advise.
|
|
smarty23
Suspended due to non-functional email address
|
17. March 2005 @ 20:45 |
Link to this message
|
You may want to try and format the DVD first and then burn to it. If you insert the DVD into the drive and then click on the drive in Windows explorer, right click and select 'Format'. If that does not work try Nero or Roxio software. The Sonic software I had a lot of trouble with, it has long since been removed from my machine.
|
|
nc4moz
Newbie
|
18. March 2005 @ 01:50 |
Link to this message
|
|
hi,
when i go to formatting the dvd..i get the message "inser media in D:"....although I have...amybe my drives busted....although i can burn cd's but not dvd's.
cheers
|
AfterDawn Addict
|
18. March 2005 @ 03:26 |
Link to this message
|
|
Hi nc4moz,
Have you tried to update your firmware?
My Guides--------->http://webpages.charter.net/bacitup/
Newbies------------>http://forums.afterdawn.com/thread_view.cfm/183136
Software ------->http://webpages.charter.net/bacitup/software.htm |
|
Steve402
Newbie
|
18. March 2005 @ 11:51 |
Link to this message
|
Hi I have recently bought a Dell Dimension 5000 and im having a problem because the Phillips DVD+RW will not read. May this be due to Sonic or Nero please help
Hi Im Steve
|
|
mvtip
Suspended due to non-functional email address
|
18. March 2005 @ 14:39 |
Link to this message
|
Hi all, just to let you guys know that DVD Cloner II is really DVD Shrink 3.17 (second to last version of what is out there).
There was a point where I was ripping a movie a for some reason DVD Shrink showed up and I have never installed the software before.
|
|
Advertisement
|
|
|
|
nc4moz
Newbie
|
19. March 2005 @ 06:44 |
Link to this message
|
|
yo bbmayo,
Have updated firmware to CD21.exe yesterday...it removed a couple of things from my DVD properties like DLA checks and speed settings.
It now allows sonic to read the DVD and goes through the motions of burning but 3/4ths through falls over saying burning failed.
This is happeneing even data dvd's...not even movie burnings?
Any suggestions.
regards,
nc
|
