User User name Password  
   
Tuesday 26.8.2025 / 17:58
Search AfterDawn Forums:        In English   Suomeksi   På svenska
afterdawn.com > forums > archived forums > xbox - general discussion > help! modded xbox and live?!
Show topics
 
Forums
Forums
Help! Modded xbox and live?!
  Jump to:
 
Posted Message
NoNameNow
Suspended due to non-functional email address
_
19. January 2005 @ 10:12 _ Link to this message    Send private message to this user   
Quote:
i dont really wanna do soldering cuz of thing that ive done b4 to electronics, and the Spyder and Xenium are the only Modchips that support solderless adaptors.
Go here https://shop.system-mods.com/index.asp?PageAction=VIEWPROD&ProdID=178&HS=1

Xecuter chips actually have a solderless adapter you can use. I've been using Xecuter Chips for a while now and haven't had any problems with them. I haven't tried out their solderless adapters because I just solder the chips to the board myself. I'm sure the adapter kit will work just as good.

Now I've been hearing about the new Live Update and how it still detects modded xbox's even if the chip is turned off. Is this true and if it is, is there any solution yet to this?
Advertisement
_
__
121flame
Junior Member
_
19. January 2005 @ 12:49 _ Link to this message    Send private message to this user   
you tryed turning the chip back on?

Xbox: Xbox Crystal, New Release v1.6
Modchip: X3
HDD: Still the same Retail Seagate :(

Not Been Busted Online Yet!!! :)
121flame
Junior Member
_
19. January 2005 @ 12:52 _ Link to this message    Send private message to this user   
and , no i don't think it is true. but you have to lock your hdd and turn the chip off then there will be no problems attall
from many hundreds of messages ive read

Xbox: Xbox Crystal, New Release v1.6
Modchip: X3
HDD: Still the same Retail Seagate :(

Not Been Busted Online Yet!!! :)
Bat_man
Junior Member
_
19. January 2005 @ 15:10 _ Link to this message    Send private message to this user   
Thats the problem 121Flame, i dont kno how to lock my hard-drive! Ive heard that i should use an app called ConFigMagic....does any1 kno where i can find this and how to use it?
Thanx in advance
121flame
Junior Member
_
20. January 2005 @ 05:56 _ Link to this message    Send private message to this user   
if you have Xecuter3 (thanx for the link, nonamenow, im looking into buying an X3 seen as the incredible flash bank storage i think will come in very usefull) then its points out a feature of lock/unlock HDD, but sadly i dont know how so soz much m8, but keep your hopes up :P

Xbox: Xbox Crystal, New Release v1.6
Modchip: X3
HDD: Still the same Retail Seagate :(

Not Been Busted Online Yet!!! :)

This message has been edited since posting. Last time this message was edited on 20. January 2005 @ 05:57

Bat_man
Junior Member
_
20. January 2005 @ 08:37 _ Link to this message    Send private message to this user   
I have an Xecuter 2.6, theres no option to do that.
kakeakeai
Member
_
20. January 2005 @ 09:42 _ Link to this message    Send private message to this user   
just use evox to lock hd in the ini unhash lock hd. it will do it for you.
Bat_man
Junior Member
_
20. January 2005 @ 10:41 _ Link to this message    Send private message to this user   
Sorry i didnt quite understand that! Have you ever used configmagic? I was wonderin if i cud burn it onto a disc and load it onto the xbox that way...any suggestions?
kakeakeai
Member
_
20. January 2005 @ 12:13 _ Link to this message    Send private message to this user   
do you need to lock the hd. if so just use evox it is really easy in the evox.ini there is a part that says
lockhd and a bunch of other stuff in front of it is like # that i think just erase everything before it in the ini. now go to evox and click that it will lock the hd with the key so you can boot with out the mod chip on.
Bat_man
Junior Member
_
20. January 2005 @ 12:36 _ Link to this message    Send private message to this user   
Do i need to hook my xbox up2 the pc to do that? Where can i find the ini ur talkin about?
kakeakeai
Member
_
20. January 2005 @ 12:39 _ Link to this message    Send private message to this user   
in the c drive on the xbox there should be a bunch of folders do you have evox.xbe and evox.ini in there?
NoNameNow
Suspended due to non-functional email address
_
20. January 2005 @ 23:40 _ Link to this message    Send private message to this user   
Bat_man, yes you would need to hook your xbox to your pc to get to the ini file. If you have Evox loaded into your xbox, follow the steps below.

Once you are able to hook your xbox to your pc go to the C folder, and look for evox.ini
Once you have found it transfer that file over to your computer.
Next open it up and scroll down to the bottom till you see something that may look like this

# Item "Lock Harddisk",@210
# Item "Unlock Harddisk",@211

Remove the "#" sign so that you will be able to see that option when you get to the main screen of evox.
Save that file and transfer it back to your xbox.

Restart your xbox. You should now see an option to lock or unlock your HD on the main screen when you turn it on. Lock your HD from there. Now you can go ahead and add the "#" signs again so they will not appear on the main screen of evox and no one can mess with it.

Hope this helps you out

This message has been edited since posting. Last time this message was edited on 20. January 2005 @ 23:42

Bat_man
Junior Member
_
21. January 2005 @ 10:16 _ Link to this message    Send private message to this user   
I dont hav any ethernet ports on my computer,could i hook it up thru my router?
kakeakeai
Member
_
21. January 2005 @ 10:26 _ Link to this message    Send private message to this user   
yes you can just change in network settings.
Bat_man
Junior Member
_
21. January 2005 @ 10:27 _ Link to this message    Send private message to this user   
to what?
kakeakeai
Member
_
21. January 2005 @ 10:47 _ Link to this message    Send private message to this user   
if your router has a static ip then use static ip make sure it will work with it. mine uses all ips 192.168.2.0-192.168.2.99 for me the xbox would have to fit in that range to work.
Bat_man
Junior Member
_
21. January 2005 @ 10:52 _ Link to this message    Send private message to this user   
See man that IP stuff means nofin to me! Sorry
kakeakeai
Member
_
21. January 2005 @ 10:55 _ Link to this message    Send private message to this user   
what do u mean to connect you have to configure the network settings and that has to do with the ip adress.
NoNameNow
Suspended due to non-functional email address
_
21. January 2005 @ 15:24 _ Link to this message    Send private message to this user   
Hey Bat's, do you know anyone that has a good knowledge about computers and networking? If you do I would advice to get help from him/her before you start messing with the xbox anymore. You might accidentally start changing or removing files you would need.
Bat_man
Junior Member
_
22. January 2005 @ 03:46 _ Link to this message    Send private message to this user   
Ok i think ive got a solution to the whole 'hooking it up to the PC' problem. ive downloaded configmagic and ive created an iso from it coz i was told that i can just burn it to dvd and run it in the xbox that way. I wud write it to a CD-R but my xbox's dvd drive wont recognise them. THis is where ive got the problem i hope you can help me with...when i try to burn the image to a disc using nero(all of which i was told to do) it wont let me! Can any1 offer advice,any1 out there tried burnin configmagic to a disc?

Thanx in advance
NoNameNow
Suspended due to non-functional email address
_
22. January 2005 @ 07:28 _ Link to this message    Send private message to this user   
your xbox will recognize CD-RW's not all brands but most. Well mine did. I bought three different CD-RW's which were Sony, Memorex, and HP. The one I had most success with are the HP cd's.
So try buying yourself like those 3 or 5 pack CD-RW's and try that out unless anyone else has a better solution.
Twinski
Member
_
22. January 2005 @ 20:59 _ Link to this message    Send private message to this user   
This is what you do. If you want to go onto live and you havent been on there before with the stock HDD it is easy. What kind of chip do you have? If you have a X3 hold the power button down for like a second and let off it shoudl turn red and then its off. And if you have a upgraded hdd make sure its locked and you should be fine. It doesnt matter if you have unsigned code on your xbox. M$ wont scna your hdd, but make sure its locked and your chip is off and you havent signed on live with the stock hdd and you should be safe.

elliot01
Suspended permanently
_
23. January 2005 @ 20:07 _ Link to this message    Send private message to this user   
Yo
Jez_Gafys
Newbie
_
24. January 2005 @ 12:10 _ Link to this message    Send private message to this user   
Below are the simple guide lines for playing online using mod chips, upgraded HDs, etc

How to play on Xbox Live with a non-flashable modded Xbox
The most important thing to know is that your MS dash must be named xboxdash.xbe. When you first run Xbox Live, it will update that file with the new MS dash with the Live tab. So, you may ask "What about EvolutionX?" Well, sorry guys, but you will have to run EvolutionX off a CD.

So now that you know that your MS dash has to be xboxdash.xbe, you will have to install a switch on your modchip. The switch will disable it, or enable the modchip.

The most important thing when playing on Live with a modded Xbox is that you must always have the modchip off when playing on Live. Turn your modchip off, and then power on Xbox. It is always best to have the modchip off, even when you are installing Live for the first time.

Now, if you want to play backups, turn your modchip on and power on Xbox. You can boot your EvolutionX CD and load your backups off the HD, or you can boot your backup CDs. However, you must make sure you DO NOT access any Live-oriented tabs within the game. DO NOT select "Download Content", "Play Live", etc. tabs in a game. When doing so, your Xbox will connect to Live, and MS will detect a modified BIOS, and you will then soon be banned.


How to play on Xbox Live with a flashable modded Xbox
So, you have the best field of modchips out there, so you have better options. The first thing you want to do is flash your modchip with a BIOS that boots a file another than xboxdash.xbe. For example, flash with a BIOS that will load evoxdash.xbe first. You can store your EvolutionX dash on your HD, and have it be evoxdash.xbe. But, be sure you keep your MS dash as xboxdash.xbe. That file will be updated when you first install Live and having the MS dash as xboxdash.xbe will make it a good update.

If you have a X2 PRO, there is an external on/off switch. Just make sure when you boot up your xbox, the switch is set to off.

For those of you with the Matrix, you will set your Matrix in mode 3. How mode 3 works is, your flashed BIOS will load when the XBox is powered on. This means the modchip is on, and you can check that by looking inside the Xbox at the modchip and it will have a green LED. But, for those who want a nice, put together Xbox, I recommend getting a BIOS that is a colormod. So, when your Xbox boots, your Xbox logo will be blue for example meaning the modchip is on.

So, you are now at your EvolutionX dash or MS dash with the modchip on. You will then run a game (an original or a backup) or even a homebrewed program, and when the game is running, press the big eject button. Your Xbox will reboot and the original BIOS will load. The normal green Xbox logo will show and this means the modchip is off. Also, the modchip will now show the red LED.

As I said above, you must make sure you DO NOT access any Live-oriented tabs within the game when the modchip is on. DO NOT select "Download Content", "Play Live", etc. tabs in a game. When doing so, your Xbox will connect to Live, and MS will detect a modified BIOS, and you will then soon be banned.


How to play on Live with an upgraded HD
Playing on Live is easy with an upgraded HD. It must always be locked. The original MS BIOS, when the modchip is off, demands a locked HD or else your Xbox won't boot. You may ask if a locked HD is ok to do with the modchip on. Yes, it's okay.

Relating to the xboxdash.xbe file, this must be in the root of C:\

As a quick note, if you are in a situation where you must run the EvolutionX CD, you can keep all your EvolutionX files (skins folder, evox.ini, etc) in their usual places on the HD, as you just will need default.xbe (EvolutionX dash) on the CD.


How to get unbanned from Xbox Live
So, you made a mistake. Your "little brother" selected a Live tab with the modchip on and now you are banned. Well, you can get unbanned. Xbox Live just bans your Xbox's HD key. Not your gamer account.

To get unbanned, you MUST obtain an unbanned EEPROM. These are not posted at the usual places, you must get it from a friend who has a modded Xbox and doesn't plan to go on Xbox Live. To update your Xbox's EEPROM with a unbanned EEPROM, download Configmagic and use that program. The program is easy to use and it is all menu driven.
Advertisement
_
__
 
_
sowerby
Junior Member
_
24. January 2005 @ 12:56 _ Link to this message    Send private message to this user   
You can use a programme called xbox connect to play online and there is a free version on it and it plays most xbox live enable only if they have a system link.
 
afterdawn.com > forums > archived forums > xbox - general discussion > help! modded xbox and live?!
 

Digital video: AfterDawn.com | AfterDawn Forums
Music: MP3Lizard.com
Gaming: Blasteroids.com | Blasteroids Forums | Compare game prices
Software: Software downloads
Blogs: User profile pages
RSS feeds: AfterDawn.com News | Software updates | AfterDawn Forums
International: AfterDawn in Finnish | AfterDawn in Swedish | AfterDawn in Norwegian | download.fi
Navigate: Search | Site map
About us: About AfterDawn Ltd | Advertise on our sites | Rules, Restrictions, Legal disclaimer & Privacy policy
Contact us: Send feedback | Contact our media sales team
 
  © 1999-2025 by AfterDawn Ltd.

  IDG TechNetwork