|
having problems with dvd decrypter
|
|
|
imnobody
Junior Member
|
14. January 2005 @ 08:04 |
Link to this message
|
|
I am using Teon dvd+r 8x and dvd decrypter. I first have decrypter read it and save it into iso, and then used that same program to write it. I select 1x for speed because i know burning it slow will have better chances on working. After pressing 1x it will start at 1x and it start to speed up all the way to 4x and keep at that rate.
I did it on my ratchet and clank 2 (1 time)and 3 (2 times) I used swap magic dvd 2.0 I would get the blue margin then a black screen and the disc will stop spinning.
What is the problem? is it my dvd+r, decrypter or do I need dvd-r?
I also have nero 6 if its any good to use it.
thanks.
v7 ps2 no mods
boot ps2 cd with smcd3.0
boot ps2 dvd with smdvd2.0
Swap Magic Slide Card
boot ps1 cd with gameshark2v2
dvd decrypter
|
|
Advertisement
|
|
|
|
|
dragulaAC
Senior Member
|
14. January 2005 @ 08:44 |
Link to this message
|
If you have a v1-4 ps2 then you will probably want to go with dvd-r's. Some v4's can handle +r's though. And anything after that should be able to handle either.
You can check your version # in the Description section here:
http://www.gocybershop.ca/customer/product.php?productid=1292&cat=0&page=1
Also, 8x can be a problem for many people. It seems to be more effective with 4x media.
~drags |
|
imnobody
Junior Member
|
14. January 2005 @ 09:00 |
Link to this message
|
|
v7 ps2 no mods
boot ps2 cd with smcd3.0
boot ps2 dvd with smdvd2.0
boot ps1 cd with gameshark2v2
dvd decrypter
v7 ps2 no mods
boot ps2 cd with smcd3.0
boot ps2 dvd with smdvd2.0
Swap Magic Slide Card
boot ps1 cd with gameshark2v2
dvd decrypter
|
|
BALLINMEX
Suspended due to non-functional email address
|
14. January 2005 @ 10:28 |
Link to this message
|
|
JUST HAD A QUESTION, I AM A NEWBIE TO THIS SO BARE WITH ME. WHAT IS THE DIFFERENCE BETWEEN DVD-RW AND DVD+RW DISCS , IS ONE BETTER OR WHAT?
|
|
dragulaAC
Senior Member
|
14. January 2005 @ 10:32 |
Link to this message
|
|
I think there's some info about them in the glossary here. Also, stay away from the RW's for ps2 games.
~drags
|
|
jonjakjam
Senior Member
|
14. January 2005 @ 10:57 |
Link to this message
|
Quote:
What is the problem?
Its either your media or your laser...or both.
Try adjusting your laser, if that doesnt fix the problem then you need to try better media.
|
AfterDawn Addict
|
14. January 2005 @ 17:29 |
Link to this message
|
YOUR MEDIA IS THE PROBLEM
The following list is in preference order. The best discs are near the top of the list. The discs at
the bottom of the list are suitable only for a landfill.
Almost flawless burns with 95-100% reliable results:
PVC = Pioneer = (-R)(-RW)
MXLRG01, MXLRG02 = Maxell = (-R) ... be aware of unbranded fakes
MCC = Mitsubishi Chemicals = (-R)<-----------------VERBATIM MY CHOICE #1
TDKG02 = TDK Corp = (-R) ... be aware of unbranded fakes
TAIYOYUDEN or YUDEN = Taiyo Yuden = (-R)<--------------FUJIFILM (made in japan) MY CHOICE #2
Decent discs, though not perfect, about 85-95%
success rate:
RICOHJPN = Ritek or Ricoh = (+R)
SONYD04 = Sony = (-R) ... be aware of unbranded fakes
PRODISC = Prodisc Media = (+RW)
INFODISC = Infodisc Media = (+RW)
RITEKG04 = Ritek = (-R)
RITEKG03 = Ritek = (-R)
OPTODISC = Optodisc = (-R)
Quality can be very questionable, about 50-80% success rate:
LEADDATA or LD01 or LD or LEDA = Lead Data = (-R)(-RW)
PRINCO = Princo = (-R)(-RW)
RITEK = Ritek = (-RW)
ONIDTECH = OnidTech = (-R)
Pathetic garbage media, landfill material, about 0-50% success rate:
RITEKG01, RITEKG02 = Ritek = (-R)
PIODATA = Lead Data = (-R) ... often sold as "Pioneer OEM" but that's false
Unbranded PIO = Fake Pioneer = (-R) ... often sold as "Pioneer OEM" but that's false
Unbranded SONY = Fake Sony = (-R)
Unbranded MXL = Fake MXL = (-R)
ACCU = Unknown OEM = (-R)
LONGTEN = Unknown OEM = (-R)
AN31, AN32, ANWELL, AN30 = Unknown OEM = (-R)
OPTODISC = Optodisc = (+R)(+RW)
MATRIX = Unknown OEM = (-R)
CMC = CMC Magnetics = (+R)(-R)
ANYTHING ELSE = Unknown OEM or NEW
Use Quality Media I use
Verbatim dvd+r 8x 100 pack ( 24.99 )
http://www.amazon.com/exec/obidos/ASIN/B0002IQ1I0/slickdeals/104-0984492-0108766
HERES HOW I COPY MY BACKUPS
1. Take the ps2 game put it in the dvd rom or dvd burner, your choice.
2. open the dvd decryptor program then go to to tool bar and hit MODE>ISO>READ. Then choose the correct dvd drive that the game is in as the "source". Also choose where you want the files to be stored on the pc hdd. THEN CLICK DECRYPT , or the huge graphical picture at the bottom of the program which makes it run. The game is now copying to your HDD. Take the game out when finished (it might take a while).
3. Go to the same tab in dvd decryptor and choose MODE>ISO>WRITE. This will then let you look for the files you just created in step 2. Select the file that you just created. (There is only 2 files creadted so pick the .mds) (The smaller file)Then click WRITE, make sure there is blank DVD in the drive.
DVD Decryptor
http://www.afterdawn.com/software/dawnload.cfm?mirror=0&software_id=298
Possunt Quia Posse Videntur. This message has been edited since posting. Last time this message was edited on 14. January 2005 @ 17:31
|
|
imnobody
Junior Member
|
15. January 2005 @ 11:09 |
Link to this message
|
That's exactly how I've been trying to copy them. One problem is
Quote:
(There is only 2 files creadted so pick the .mds) (The smaller file)
when I select the smaller one (the one with the cd picture) the program doesn't allow me saying it should be the other one. Som I've been burning the second one.
I've also been using decrypter to burn it I know 1x is for better results so thats what I select and for some reason it starts to speed up to 4x and it stays at that rate.
Why is that? Thanks.
v7 ps2 no mods
boot ps2 cd with smcd3.0
boot ps2 dvd with smdvd2.0
Swap Magic Slide Card
boot ps1 cd with gameshark2v2
dvd decrypter
|
|
imnobody
Junior Member
|
15. January 2005 @ 11:15 |
Link to this message
|
|
Last question. I am going to buy some better media and I've been thinking of getting
TDKG02 = TDK Corp = (-R) ... be aware of unbranded fakes
or
SONYD04 = Sony = (-R) ... be aware of unbranded fakes
Since dragula said older ps2 (mine is a v7) should go with DVD+r so should I? And I don't think it's my ps2 laser, because I've been able to play borrowed backups.
v7 ps2 no mods
boot ps2 cd with smcd3.0
boot ps2 dvd with smdvd2.0
Swap Magic Slide Card
boot ps1 cd with gameshark2v2
dvd decrypter
|
|
danbooke
Member
|
15. January 2005 @ 12:44 |
Link to this message
|
Okay do not use DVD+R, alot of PS2's cannot read these. Also, upgrade your Swap Magic Disc with the newer version. And last do not use DVD Decrypter, the program is complete crap and has given me nothing but coasters doing it the way you are talking about. I HATE THAT PROGRAM! Use Nero, I used it for my 200+ backups and not a single coaster yet. The company you buy DVD-R's from shouldn't really matter. Yeah some companies use cheaper materials, but DVD's are not meant to last forever. I have used some of the cheapest rice made discs in the universe as well as the high end products and the only time I have had problems with my media is when I used it for a frisbee and then tried to play it. Alot of people here are so jaded about this topic.
|
|
RXV2300
Member
|
15. January 2005 @ 13:47 |
Link to this message
|
Can someone give me a walkthrough on how to use Nero to make backup copies for PS2.
I have no problem using DVD-decrypter to make back-up copies but I am not very faimilar with Nero.
Thank you,
|
|
imnobody
Junior Member
|
15. January 2005 @ 14:26 |
Link to this message
|
since i have Nero 6 I'm going to use that istead of Decrypter, but this doesn't look helpful
Using Nero
1. Start Nero, Use the Wizard (for easy use)
2. Select "DVD" then select Next
3. Select "Copy a DVD" then select Next
4. Select your source drive
5. Select or Deselect "copy on the fly" then click next
6. Select your write speed
7. Select either "Test", "Test and Burn" or "Burn"
8. Press "Burn" to begin
i got it from http://forums.afterdawn.com/thread_view.cfm/15105
v7 ps2 no mods
boot ps2 cd with smcd3.0
boot ps2 dvd with smdvd2.0
Swap Magic Slide Card
boot ps1 cd with gameshark2v2
dvd decrypter
|
|
Advertisement
|
|
|
AfterDawn Addict
|
15. January 2005 @ 14:47 |
Link to this message
|
|
Danbooke:
Dont hate something because you dont understand it.
Seems funny how DVD Decrypter works for everyone
here that tried my above method EXCEPT you.
I dont use Your method but i dont run around
telling people its crap not to use it.
Let people make there own Minds.
Go try to impress people somewhere else.
(with your 200 perfect backups....BAH)
ALSO
MY ps2 is ver 7 and reads +r disks better
Than -r
And keep using cheap media sooner or later
you will get burned.
all this has been said here before if you
would do some research or just ask
sly_61019. <-----THE MAN Knows A LOT
EVERYONE ELSE I AM SORRY just so tired
of hearing His crap.
If i can help anyone just PM me.
Possunt Quia Posse Videntur.
This message has been edited since posting. Last time this message was edited on 15. January 2005 @ 15:00
|
