|
help with DVD Decrypter i/o Error, Failed to Write Sectors
|
|
|
Metosky
Junior Member
|
14. January 2005 @ 16:05 |
Link to this message
|
|
I have only burned 4 backups. 1 works fine, the others play 20sec. of the intro of that game'"same 3 backup" then that pink-red screen pops up. "please put in ps or ps2 format disk"
Why dose that one game do that?
and now I can't burn any backups.
I 10:33:40 DVD Decrypter Version 3.5.2.0 started!
I 10:33:40 Microsoft Windows 98 SE
W 10:33:40 Drive C:\ (FAT32) does not support single files > 4 GB
W 10:33:40 Drive D:\ (FAT32) does not support single files > 4 GB
I 10:33:40 Initialising ASPI...
I 10:33:41 WNASPI32.DLL - Adaptec's ASPI Layer - ASPI for Win32 (95/NT) DLL - Version 4.5.7.1008
I 10:33:41 Searching for SCSI / ATAPI devices...
I 10:33:41 Found 1 DVD-ROM and 1 DVD+RW!
I 10:34:12 Operation Started!
I 10:34:12 Source File: D:\Games\grand turismo 3\GRAN TURISMO 3.MDS
I 10:34:12 Source File Sectors: 1,893,872 (MODE1/2048)
I 10:34:12 Source File Size: 3,878,649,856 bytes
I 10:34:12 Destination Device: [1:0:0] HP DVD Writer 300c EK24 (F:)
I 10:34:12 Destination Media Type: DVD+R (Disc ID: AML-001-00) (Speeds: 2.4x, 4x)
I 10:34:12 Destination Media Sectors: 2,295,104
I 10:34:12 Write Mode: DVD
I 10:34:12 Write Speed: MAX
I 10:34:12 Test Mode: No
I 10:34:12 BURN-Proof: Enabled
I 10:34:13 Filling Buffer...
I 10:34:22 Writing LeadIn...
I 10:34:26 Writing Image...
W 10:34:55 Failed to Write Sectors 29856 - 29887 - Write Error
W 10:34:55 Retrying (1 of 20)...
(2 of 20,3 ,3 ,,,10, .,,,,,19 of 20)
W 10:34:56 Retry Failed - Invalid Address For Write
W 10:34:56 Retrying (20 of 20)...
W 10:34:56 Retry Failed! - Invalid Address For Write
E 10:54:32 Failed to Write Sectors 29856 - 29887 - Invalid Address For Write
I 10:54:32 Synchronising Cache...
I 10:54:32 Closing Track...
I 10:54:41 Finalising Disc...
E 10:54:54 Failed to Write Image!
E 10:54:54 Operation Failed! - Duration: 00:20:41
I 10:54:54 Average Write Rate: 49 KB/s (0.0x) - Maximum Write Rate: 2,133 KB/s (1.5x)
and this is the error i got too.
I/O Error!
Device:[1:0:0]HP DVD Writer 300c EK24
ASPI SRB Status: 0x04
Interpretation: SRB Completed With Error
Host Adapter Status: 0x00
Interpretation: Host Adapter Did Not Detect An Error
Target Status: 0x02
Interpretation: Check condition
CDB: 2a 00 00 00 74 a0 00 00 20 00
Interpretation: Write (10) - Sectors: 29856 - 29887
Sense Area: 70 00 05 00 00 00 00 12 00 00 00 00 21 02 00 00 00 00 00 01 02 03 05 06 07 00 00 00 00 00 00
Interpretation: Invalid Address For Write
I have a ps2 slim
w/swap disk
I use dvd+r
|
|
Advertisement
|
|
|
|
|
Metosky
Junior Member
|
14. January 2005 @ 16:41 |
Link to this message
|
ps. I had Nero 6.? and hp burning softW.
I uninstalled these 2 progs.
same error befor and after
|
AfterDawn Addict
|
14. January 2005 @ 17:33 |
Link to this message
|
YOUR MEDIA IS THE PROBLEM
Your DISK ID IS AML (Garbage media very unreliable)
AND IT WONT BURN AT 2x
The following list is in preference order. The best discs are near the top of the list. The discs at
the bottom of the list are suitable only for a landfill.
Almost flawless burns with 95-100% reliable results:
PVC = Pioneer = (-R)(-RW)
MXLRG01, MXLRG02 = Maxell = (-R) ... be aware of unbranded fakes
MCC = Mitsubishi Chemicals = (-R)<-----------------VERBATIM MY CHOICE #1
TDKG02 = TDK Corp = (-R) ... be aware of unbranded fakes
TAIYOYUDEN or YUDEN = Taiyo Yuden = (-R)<--------------FUJIFILM (made in japan) MY CHOICE #2
Decent discs, though not perfect, about 85-95%
success rate:
RICOHJPN = Ritek or Ricoh = (+R)
SONYD04 = Sony = (-R) ... be aware of unbranded fakes
PRODISC = Prodisc Media = (+RW)
INFODISC = Infodisc Media = (+RW)
RITEKG04 = Ritek = (-R)
RITEKG03 = Ritek = (-R)
OPTODISC = Optodisc = (-R)
Quality can be very questionable, about 50-80% success rate:
LEADDATA or LD01 or LD or LEDA = Lead Data = (-R)(-RW)
PRINCO = Princo = (-R)(-RW)
RITEK = Ritek = (-RW)
ONIDTECH = OnidTech = (-R)
Pathetic garbage media, landfill material, about 0-50% success rate:
RITEKG01, RITEKG02 = Ritek = (-R)
PIODATA = Lead Data = (-R) ... often sold as "Pioneer OEM" but that's false
Unbranded PIO = Fake Pioneer = (-R) ... often sold as "Pioneer OEM" but that's false
Unbranded SONY = Fake Sony = (-R)
Unbranded MXL = Fake MXL = (-R)
ACCU = Unknown OEM = (-R)
LONGTEN = Unknown OEM = (-R)
AML = (+R)(-R)
AN31, AN32, ANWELL, AN30 = Unknown OEM = (-R)
OPTODISC = Optodisc = (+R)(+RW)
MATRIX = Unknown OEM = (-R)
CMC = CMC Magnetics = (+R)(-R)
ANYTHING ELSE = Unknown OEM or NEW
Use Quality Media I use
Verbatim dvd+r 8x 100 pack ( 24.99 )
http://www.amazon.com/exec/obidos/ASIN/B0002IQ1I0/slickdeals/104-0984492-0108766
HERES HOW I COPY MY BACKUPS
BURN AT NO MORE THAN 2x<-----IMPORTANT
TURN OFF ANY BACKGROUND PROGRAMS
1. Take the ps2 game put it in the dvd rom or dvd burner, your choice.
2. open the dvd decryptor program then go to to tool bar and hit MODE>ISO>READ. Then choose the correct dvd drive that the game is in as the "source". Also choose where you want the files to be stored on the pc hdd. THEN CLICK DECRYPT , or the huge graphical picture at the bottom of the program which makes it run. The game is now copying to your HDD. Take the game out when finished (it might take a while).
3. Go to the same tab in dvd decryptor and choose MODE>ISO>WRITE. This will then let you look for the files you just created in step 2. Select the file that you just created. (There is only 2 files creadted so pick the .mds) (The smaller file)Then click WRITE, make sure there is blank DVD in the drive.
Possunt Quia Posse Videntur. This message has been edited since posting. Last time this message was edited on 14. January 2005 @ 17:39
|
|
Metosky
Junior Member
|
15. January 2005 @ 12:34 |
Link to this message
|
|
|
AfterDawn Addict
|
15. January 2005 @ 16:40 |
Link to this message
|
|
I use both of those And i can verify
They are both EXCELLENT for ps2 backups.
Possunt Quia Posse Videntur.
|
|
squizzle
AfterDawn Addict
|
16. January 2005 @ 13:22 |
Link to this message
|
Burn at 1x if possible, 2x if 1x isn't possible. NEVER 4x! Maybe I read your error log wrong, but it appears as if it tried to write the disc at the same time it tried to read the original. I wasn't even aware that DVD Decrypter could do that, but if it can, don't. Movies sometimes have problems going disc to disc, games definitely will.
Convert PAL to NTSC or NTSC to PAL------>http://forums.afterdawn.com/thread_view.cfm/167922
ScubaPete's guides------>http://www.dvdplusvideo.com/tutorial007.html
Bbmayo's guides------>http://home.comcast.net/~bbmayo/index.html
My ever-growing movie collection------>http://www.intervocative.com/dvdcollection.aspx/squizzle
|
AfterDawn Addict
|
16. January 2005 @ 16:35 |
Link to this message
|
|
10:34:12 Source File: D:\Games\grand turismo 3\GRAN TURISMO 3.MDS
no the source was on hd.
the problem was his disks didnt support 1x
(And they werent that good either)
10:34:12 Destination Media Type: DVD+R (Disc ID: AML-001-00) (Speeds: 2.4x, 4x)
Just try burning it at 2.4
(still dont think they will work right until
you get better media, but good luck)
Possunt Quia Posse Videntur.
|
|
Metosky
Junior Member
|
16. January 2005 @ 22:39 |
Link to this message
|
|
tried same disk at friends, worked good.
i can't even burn cd's and more.
i don't know what when wrong.
Ps2/slim-swap disk
Hp-dvd630i
|
AfterDawn Addict
|
17. January 2005 @ 01:20 |
Link to this message
|
|
looks likes to me the media you use is not compatible with the burner you use.how long have you had the burner?
if you are competant pc user,try updating your firmware.
the problem with HP300 is that you can only write to dvd+r,so you cant even try dvd-r.
like jizmak suggeted,change your media,and make it good quality.
This message has been edited since posting. Last time this message was edited on 17. January 2005 @ 01:30
|
|
R2G2
Suspended due to non-functional email address
|
17. January 2005 @ 01:35 |
Link to this message
|
Quote:
the problem was his disks didnt support 1x
Sorry for being thick, but if a disk says 4x, can you not burn it at 1, 2 or 4x?
I've suddenly been getting the same problem (in out errors when verifying, and they are all coasters). Eg: "E 11:36:45 Failed to read Sector 441696 - The request could not be performed because of an I/O device error."
I'm using the same DVDs as I always have, and they've worked until recently - Manufacturer ID: RITEKG05
This message has been edited since posting. Last time this message was edited on 17. January 2005 @ 01:37
|
|
Metosky
Junior Member
|
17. January 2005 @ 07:35 |
Link to this message
|
|
the disk are good! they are +r plays fine "the frist one I burnt, and the one I did at a friends" I try any disk in it now, and it wont burn "dvd+r or cd's games moives or music" it dose read disk.
Dose anyone know if "EK24" is the new frimware?
plus I have an internal hooked up external.
So how dose one up date an hp burner with HP's Ms-dos installer? It dose not find the drive.<---drivers for the usb 2.0 ide are not loaded when HP's updater boots to dos prompt!!
Ps2/slim-swap disk
Hp-dvd630i
This message has been edited since posting. Last time this message was edited on 17. January 2005 @ 07:37
|
|
r0c0
Suspended permanently
|
17. January 2005 @ 07:43 |
Link to this message
|
|
what media(brand) did u use cuz i cant see that anywere...
|
AfterDawn Addict
|
17. January 2005 @ 09:15 |
Link to this message
|
Quote:
what media(brand) did u use cuz i cant see that anywere..
i have never heard of them either
(Disc ID: AML-001-00
|
|
Metosky
Junior Member
|
27. January 2005 @ 10:34 |
Link to this message
|
|
I'm running a laptop, with a usb 2.0 notebook card, and an IDE to USB 2.0 convertor. the hp firmware dob not find my burner "through the convertor". I hooked up the convertor at a friends and have burnt 6 backups. Same firmware. ah ah help? any ideas?
ps.
we both have xp
Ps2/slim-swap disk
Hp-dvd630i
|
AfterDawn Addict
|
27. January 2005 @ 12:01 |
Link to this message
|
|
I 10:33:40 Microsoft Windows 98 SE
W 10:33:40 Drive C:\ (FAT32) does not support single files > 4 GB
W 10:33:40 Drive D:\ (FAT32) does not support single files > 4 GB
I 10:33:40 Initialising ASPI
The error you posted shows
Microsoft Windows 98 SE
What media are you using.
Cheap media could be the problem.
Possunt Quia Posse Videntur.
|
|
Advertisement
|
|
|
|
Metosky
Junior Member
|
28. January 2005 @ 10:20 |
Link to this message
|
|
I'm not getting any errors any more. I have xp now.
I can get it to burn now with "DVD Decrypter Version 3.5.2.0" but it is writing at 0kps/0.0x to 12kps/0.1x
and I dont want to wait 2 days for a dvd to burn.
but "THE MEIDA IS GOOD!!" I have burnt 15 backups at a friends with this media and same burner, not the same kind of burner, but my burner.
Some one told me it could be is some settings. but where are these settings? I've hunted all over the hard drive but i have not found any setting to change anything with the burner.
.
.
.
Any Ideas?
ps.
I have had a hp dvd300i but now I got a hp630c
Ps2/slim-swap disk
Hp-dvd630i
This message has been edited since posting. Last time this message was edited on 28. October 2005 @ 06:09
|
