|
|
|
trouble burning the Incredibles
|
|
|
mar02
Newbie
|
30. March 2005 @ 18:09 |
Link to this message
|
|
I used dvd shrink with dvd decryptor and everything went fine when i burned x-men 2 but with the incredibles an error message comes out when it attempts to burn.
can someone please help me?
|
|
Advertisement
|
 |
|
|
|
Bruce999
Member
|
30. March 2005 @ 19:13 |
Link to this message
|
|
Mar02:
I suspect you will have a much better chance of getting some help on this issue if you try to give the knowledgable users here a bit of information. Lacking a crystal ball, they may not be able to help you.
-WHAT is the error message you are receiving? Error messages will always help to at least narrow the focus, so we are not suggesting the thousands of things that sometimes go wrong, but did not, in this case.
-What type of media are you using?
-What type of DVD burner are you using?
-I noticed you are (apparently) trying to use DVDShrink. Is this an attempt to burn with compression, or have you split the film to two DVDs?
-Which version of DVDShrink? At what speed are you trying to burn?
Remember, the more information you can give, the more relevent and effective any advice or help is likely to be. With no information, the frustration felt by those who would like to help is akin to reading a post that says: "This is not working. Fix it!"
In other words, useless.
-Bruce999
|
|
mar02
Newbie
|
31. March 2005 @ 07:36 |
Link to this message
|
|
i'm getting an error message that says:
DVD Decrypter
I/O Error!
Device [0:0:0] Sony DVD RW DW-D22A BFS1 (D:) (ATA)
CDB: 2A 00 00 02 19 00 00 20 00
Interpretation: Write (10)-Sectors: 137472-137503
i have a brand new sony vaio with 200 GB hard drive (the rest of the specs i don't know) and i've already tried burning just the main movie, but it only burned about 10%
|
|
mar02
Newbie
|
31. March 2005 @ 07:37 |
Link to this message
|
|
i'm using TDK DVD+R media
|
AfterDawn Addict
|
31. March 2005 @ 07:55 |
Link to this message
|
|
|
|
reetann
Suspended due to non-functional email address
|
31. March 2005 @ 10:06 |
Link to this message
|
most of the new dvd's have new protection chip try DVD Decrypter its free.
|
Moderator
|
31. March 2005 @ 10:13 |
Link to this message
|
|
erm, the original poster is already using decrypter; we don't know if it's the latest version, but the incredibles hasn't got any funny protections on it from what i and others have seen. No protection chip either :)
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules *** |
AfterDawn Addict
|
31. March 2005 @ 10:38 |
Link to this message
|
|
BB didn't do that one. It's safe;-)
|
|
mar02
Newbie
|
31. March 2005 @ 11:13 |
Link to this message
|
i tried burning with Nero and again it gave me another error
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 5:35:34 PM
Nero API version: 6.6.0.8
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Recorder: <SONY DVD RW DW-D22A> Version: BFS1 - HA 0 TA 0 - 6.6.0.8
Adapter driver: <atapi> HA 0
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
=== Scsi-Device-Map ===
CdRomPeripheral : SONY DVD RW DW-D22A atapi Port 0 ID 0 DMA: Off
CdRomPeripheral : SAMSUNG CD-ROM SC-148A atapi Port 0 ID 1 DMA: On
DiskPeripheral : ST3200822AS atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
SONY DVD RW DW-D22A D: CDRom0
SAMSUNG CD-ROM SC-148A E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 73400320 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 502MB (514792kB)
Free physical memory: 131MB (134588kB)
Memory in use : 73 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
31.3.2005
NeroAPI
2:40:31 PM #1 Phase 112 File APIProgress.cpp, Line 276
DVD-Video files reallocation started
2:40:31 PM #2 Phase 114 File APIProgress.cpp, Line 276
DVD-Video files reallocation completed (no file modified)
2:40:31 PM #3 Phase 111 File APIProgress.cpp, Line 276
DVD-Video files sorted
2:40:31 PM #4 Text 0 File Reader.cpp, Line 127
Reader running
2:40:31 PM #5 Text 0 File Writer.cpp, Line 122
Writer SONY DVD RW DW-D22A running
2:40:31 PM #6 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.
2:40:31 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)
2:40:31 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)
2:40:31 PM #9 Text 0 File Burncd.cpp, Line 3153
Turn on Disc-At-Once, using DVD media
2:40:57 PM #10 Text 0 File DlgWaitCD.cpp, Line 259
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2286111 (508:01.36, 4465MB)
2:40:57 PM #11 Text 0 File DlgWaitCD.cpp, Line 271
Write in overburning mode: NO
2:40:57 PM #12 Text 0 File DlgWaitCD.cpp, Line 2316
Recorder: SONY DVD RW DW-D22A, Media type: DVD+R
Disc Manufacturer ID: CMC MAG, Media Type ID: E01, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 3
2:40:57 PM #13 Text 0 File DlgWaitCD.cpp, Line 433
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD+R DL.)
2:40:57 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2286112 (2286112) = #2286112/508:1.37
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286112 blocks [SONY DVD RW DW-D22A]
--------------------------------------------------------------
2:40:57 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [SONY DVD RW DW-D22A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681957376, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286112 | lead-out | 1 | 0x41 | 0x00
2:40:57 PM #16 Phase 24 File APIProgress.cpp, Line 276
Caching of files started
2:40:57 PM #17 Text 0 File Burncd.cpp, Line 4040
Cache writing successful.
2:40:57 PM #18 Phase 25 File APIProgress.cpp, Line 276
Caching of files completed
2:40:57 PM #19 Phase 36 File APIProgress.cpp, Line 276
Burn process started at 8x (11,080 KB/s)
2:40:57 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
2:40:57 PM #21 Text 0 File Cdrdrv.cpp, Line 8430
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 3 h
Disc Manufacturer ID: CMC.MAG.
Media type ID: E01
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 03 43 4D 43 20 4D - 41 47 00 45 30 31 00 38 ...CMC.MAG.E01.8
23 54 37 10 02 38 6A 02 - 88 67 15 15 0B 0B 08 08 #T7..8j..g......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................
2:40:57 PM #22 Text 0 File DVDR.cpp, Line 5317
Drive: SONY DVD RW DW-D22A
Book Type request [LO]: DVD-ROM
Changing the Book Type was finished successfully, return code 0
2:40:57 PM #23 CDR -1211 File DVDR.cpp, Line 4763
Book Type set to: DVD-ROM
2:40:57 PM #24 Text 0 File DVDPlusRW.cpp, Line 638
Start write address at LBA 0
DVD high compatibility mode: Yes
2:56:30 PM #25 SCSI -1135 File Cdrdrv.cpp, Line 1435
SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x01730000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x09 0x07 0x60 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x0C 0x00
2:56:30 PM #26 CDR -1135 File Writer.cpp, Line 311
Write error
2:56:30 PM #27 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
2:56:30 PM #28 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
2:56:31 PM #29 Text 0 File DVDR.cpp, Line 5317
Drive: SONY DVD RW DW-D22A
Book Type request [LO]: DVD-ROM
Changing the Book Type was finished successfully, return code 0
2:56:31 PM #30 Phase 38 File APIProgress.cpp, Line 276
Burn process failed at 8x (11,080 KB/s)
2:56:31 PM #31 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.
2:56:31 PM #32 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.
Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=7.0.1.39 , size=24576 bytes, created 4/2/2004 10:32:20 PM
File 'Drivers\PXHELP20.SYS': Ver=2.03.19E, size=20576 bytes, created 10/21/2004 2:03:00 AM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
Moderator
|
31. March 2005 @ 16:25 |
Link to this message
|
Quote:
CdRomPeripheral : SONY DVD RW DW-D22A atapi Port 0 ID 0 DMA: Off
Not good ... enable DMA.
I backed up this movie by ... ripping w/ DVD Decrypter and then running it through Recode2.
|
|
mar02
Newbie
|
1. April 2005 @ 10:18 |
Link to this message
|
|
i'm sorry i don't know what or how to enable the DMA
can you please tell me how
|
AfterDawn Addict
|
1. April 2005 @ 10:23 |
Link to this message
|
hi
its in device manager!
but i dont think it will solve it?
have you changed media since last film burnt?
Nothing here to see, move along folks.
 |
|
reetann
Suspended due to non-functional email address
|
1. April 2005 @ 10:59 |
Link to this message
|
OK Creaky I copied it with DVD Decrypter burnt using Roxio DVD easy creator no problems but then I'm a junior. Nero no longer works for me so changed.But as you know best may ask for advice in future!!!No offence meant lol
|
Moderator
|
1. April 2005 @ 11:03 |
Link to this message
|
|
no offence taken, and certainly none meant. just avin a joke :)
glad ya got it sorted...
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
|
mar02
Newbie
|
1. April 2005 @ 11:29 |
Link to this message
|
|
i'm still using TDK media do think if i change it that it will work
|
|
reetann
Suspended due to non-functional email address
|
2. April 2005 @ 01:54 |
Link to this message
|
|
Don't know if I helps but I use Datawrite - only discs
I have used these on all comps I have owned never had a problem.You do get the odd one that declines to play.But then I buy quite cheap 25 spindle of them so I put it down to this.Having said that it may be 1 in 50 bad disc.Have gross trouble using + discs none of them play for me.Have you tried - ?
|
AfterDawn Addict
|
2. April 2005 @ 01:59 |
Link to this message
|
|
mar02, I noticed in the log the burn speed was at 8x, have you tried burning at 4x?
Reetan, is your standalone compatible with the media you are using? Early ones would not "do" the "plus" format, only the "dash" format.
I have had a 100% success rate with the Datawrite media. I only use +RW discs BTW.
Pulsar
Gif by Phantom69
 This message has been edited since posting. Last time this message was edited on 2. April 2005 @ 02:03
|
Moderator
|
2. April 2005 @ 02:13 |
Link to this message
|
|
if using +R disks and they don''t always play on standalones, look into the book type setting, i've posted on this 2 or so times in last couple days for other ppl, so maybe do a search on my posts if u like. Not sure where exactly, 'fraid afterdawn's search facility isn't very good
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
|
reetann
Suspended due to non-functional email address
|
2. April 2005 @ 02:27 |
Link to this message
|
|
Pulsa my stand alone DVD player will play + its my comp writer only writes - on single layer but + on duel layer at 4 speed I control the speed for writing all DVD's to 4 speed found probs out of sink at faster speed.
Thanks
|
AfterDawn Addict
|
2. April 2005 @ 09:14 |
Link to this message
|
hi all
if you are burning with DVD Decrypter and you have one of the drives listed in the box below you can burn in different ways to make more compatible for standalone players!
i wonder why theres more setings for a LITE-ON --- hehehe, its cos the maker of DVD Decrypter uses? guess what ? yup a lite-on drive
i just got a datawrite and my pioneer wont read it!!!! but my old samsung dvdrom reads it ok!
Nothing here to see, move along folks.
|
|
mar02
Newbie
|
4. April 2005 @ 16:15 |
Link to this message
|
|
I tried burning at 4x and it still didn't burn and it still gave me an other error message
I/O Error!
Device:[0:0:0] Sony DVD RW DW-D22A BFS1 (D:) (ATA)
ScsiStatus:0x02
Interpretation: Check Condition
CDB 2A 00 00 00 00 65 E0 00 00 20 00
Interpretation: Write (10)-sectors:26080-26111
SenseArea 70 00 03 00 00 00 00 0A 00 00 00 00 0C 00 00 00 00 00
Interpretation: Write Error
|
Moderator
|
4. April 2005 @ 22:14 |
Link to this message
|
|
@mar02 - i'm sure this is a common problem, post the rest of your log and media details etc etc..
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
|
camstuf
Suspended permanently
|
5. April 2005 @ 01:10 |
Link to this message
|
Emachines: T2865/AMD Athlon? XP 2800+ Processor (2.083 GHz)
NVIDIA® nForce?2/160 GB HDD/512 MB DDR (PC 2700)
DVD +/- RW Drive CD-ROM Drive; 3.5" 1.44MB FDD;
8-in-1 Media Reader/ |
|
mar02
Newbie
|
5. April 2005 @ 20:27 |
Link to this message
|
|
Thank you all for all your help
the movie finally burned with Alcohol 120%
|
|
Advertisement
|
|
|
AfterDawn Addict
|
5. April 2005 @ 22:11 |
Link to this message
|
|
hi
great! so you had no problems you just used the same files and same disc and it burnt?
if so you have somwthing here! as that error comes up alot here!!!! and its usally media!
Nothing here to see, move along folks.
|
|
