|
|
|
Reset Occurred with Nero
|
|
|
yash_y2v
Newbie
|
28. April 2005 @ 10:21 |
Link to this message
|
|
Hi.
I have a DVD writer SONY DVD RW DRU 500A.
I have always been able to write to DVD-R's with my writer. But lately I was forced to upgrade my Nero as I upgraded to XP Service Pack 2... Since then I get "Reset Occurred" error during lead-in when I try to burn a DVD-R... I have wasted 4 DVDs with this!!!! But, when I tried with a DVD+RW, everything goes fine!!! please help, I've got tons of backup to make...
Thanks
Here is the log from Nero:
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=0, 2, 1, 3, size=66560 bytes, created 4/6/2002 13:53:00
ahead WinASPI: File 'C:\PROGRA~1\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 18:35:34
Nero Version: 6.6.0.12
Internal Version: 6, 6, 0, 12c
(Nero Express)
Recorder: <SONY DVD RW DRU-500A> Version: 2.0c - HA 4 TA 3 - 6.6.0.12
Adapter driver: <viamraid> HA 4
Drive buffer : 8192kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <ASUS DVD-E616P2 >Version: 1.07 - HA 4 TA 2 - 6.6.0.12
Adapter driver: <viamraid> HA 4
=== Scsi-Device-Map ===
CdRomPeripheral : ASUS CRW-3212A atapi Port 0 ID 0 DMA: On
DiskPeripheral : WDC WD800JD-00HKA0 atapi Port 2 ID 1 DMA: On
DiskPeripheral : ST3200822A 3.01 viamraid Port 4 ID 0 DMA: Off
CdRomPeripheral : ASUS DVD-E616P2 1.07 viamraid Port 4 ID 2 DMA: Off
CdRomPeripheral : SONY DVD RW DRU-500A 2.0c viamraid Port 4 ID 3 DMA: Off
=== CDRom-Device-Map ===
ASUS CRW-3212A G: CDRom2
ASUS DVD-E616P2 H: CDRom0
SONY DVD RW DRU-500A I: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523756kB)
Free physical memory: 142MB (145928kB)
Memory in use : 72 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
28.4.2005
ISO compilation
22:04:39 #1 Text 0 File Isodoc.cpp, Line 6194
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
22:04:39 #2 Text 0 File Reader.cpp, Line 127
Reader running
22:04:39 #3 Text 0 File Writer.cpp, Line 122
Writer SONY DVD RW DRU-500A running
22:04:39 #4 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)
22:04:39 #5 Text 0 File Burncd.cpp, Line 3153
Turn on Disc-At-Once, using DVD media
22:04:39 #6 Text 0 File DlgWaitCD.cpp, Line 260
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2234239 (496:29.64, 4363MB)
22:04:39 #7 Text 0 File DlgWaitCD.cpp, Line 272
Write in overburning mode: NO (enabled: CD)
22:04:39 #8 Text 0 File DlgWaitCD.cpp, Line 2339
Recorder: SONY DVD RW DRU-500A, Media type: DVD-R
Disc Manufacturer: NANYA- - JC001
Disc Application Code: 64, Disc Physical Code: 193
22:04:39 #9 Text 0 File DlgWaitCD.cpp, Line 438
>>> Protocol of DlgWaitCD activities: <<<
=========================================
22:04:39 #10 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2234240 (2234240) = #2234240/496:29.65
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2234240 blocks [SONY DVD RW DRU-500A]
--------------------------------------------------------------
22:04:40 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [SONY DVD RW DRU-500A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4575723520, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2234240 | lead-out | 1 | 0x41 | 0x00
22:04:40 #12 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
22:04:40 #13 Text 0 File Burncd.cpp, Line 4037
Cache writing successful.
22:04:40 #14 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
22:04:40 #15 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 4x (5,540 KB/s)
22:04:40 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
22:04:40 #17 Text 0 File DVDR.cpp, Line 2258
Recording mode: Sequential Recording Mode
22:04:40 #18 Text 0 File Mmc.cpp, Line 21356
Set BUFE: Power-Burn -> ON
22:04:41 #19 Text 0 File DVDR.cpp, Line 2412
Start write address at LBA 0
DVD high compatibility mode: Yes
22:04:41 #20 Text 0 File Cdrdrv.cpp, Line 8438
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
22:04:42 #21 Text 0 File Cdrdrv.cpp, Line 1288
22:04:42.390 - SONY DVD RW DRU-500A\H4 T3 : Queue again later
22:04:42 #22 SCSI -500 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 4, TA 3, LUN 0, buffer 0x044C0000
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x00 0x08 0xC0 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02
22:04:46 #23 SCSI -1114 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 4, TA 3, LUN 0, buffer 0x04B41400
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x06 (KEY_UNIT_ATTENTION)
Sense Code: 0x29
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x08 0xC0 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x06 0x00 0x00 0x00 0x00 0x12
0x00 0x00 0x00 0x00 0x29 0x00
22:04:46 #24 CDR -1114 File Writer.cpp, Line 311
Reset occurred
22:04:46 #25 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
22:04:47 #26 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
22:04:47 #27 Text 0 File DVDR.cpp, Line 2649
EndDAO: Last written address was 2239
22:05:57 #28 Phase 39 File dlgbrnst.cpp, Line 1832
Burn process aborted
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.02.56a, size=17168 bytes, created 11/2/2004 0:02:55 (Prassi/Veritas driver for win 2K)
File 'Drivers\viamraid.sys': Ver=5.1.2600.310, size=74112 bytes, created 5/18/2004 12:55:26 (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
This message has been edited since posting. Last time this message was edited on 28. April 2005 @ 15:35
|
|
Advertisement
|
 |
|
|
AfterDawn Addict
|
28. April 2005 @ 11:58 |
Link to this message
|
Although I can't help with your problem, I do suggest you edit out your Nero serial number.
|
AfterDawn Addict
|
28. April 2005 @ 12:35 |
Link to this message
|
Quote:
Disc Manufacturer: NANYA- - JC001
What brand name and speed rate is this media?
DiskPeripheral : ST3200822A 3.01 viamraid Port 4 ID 0 DMA: Off
CdRomPeripheral : ASUS DVD-E616P2 1.07 viamraid Port 4 ID 2 DMA: Off
CdRomPeripheral : SONY DVD RW DRU-500A 2.0c viamraid Port 4 ID 3 DMA: Off
DMA needs to be on.
The media you are using is the likely culprit. I haven't ever seen that mfg code. If it is poor media,that can throw your ide's into pio mode.
Uninstall your ide controllers,reboot to get them back to DMA or UDMA mode.
Try a small pack of maxell -4x or -8x.Very good media and easy to find.
HP a1118x-b/athlon 64-3300+/BenQ 1650 BCDC/LG 8163B/Modded Wii/Epson-R300 and Ty Watershields!!! |
|
yash_y2v
Newbie
|
28. April 2005 @ 17:13 |
Link to this message
|
First, thanks a lot for replying.
Can't be the media because I have been using this for a while now...
The DMA mode I have been trying in vain to turn it on.
My Writer was on an IDE header controlled by VIA Chipset VT6410 (Board: Gigabyte 915P Duo Pro)....
I can't figure out how to change the DMA on the IDE Channels resulting from the chipset. In the properties when I set it to "DMA if applicable", the current transfer mode remains "Not Applicable"...
But when I change the writer to another IDE Header on the board not from the Chipset, I can set DMA on. I did it.
Fine, now I start a simulation with Nero, the simulation starts Fine, hourray!!!! Lead-in passed...
But the simulation fails at 31% now!!!!! With a "Write Error"...
Here's the log:
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=0, 2, 1, 3, size=66560 bytes, created 4/6/2002 13:53:00
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 18:35:34
Nero Version: 6.6.0.12
Internal Version: 6, 6, 0, 12c
Recorder: <SONY DVD RW DRU-500A> Version: 2.0c - HA 0 TA 1 - 6.6.0.12
Adapter driver: <atapi> HA 0
Drive buffer : 8192kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <ASUS DVD-E616P2 >Version: 1.07 - HA 4 TA 2 - 6.6.0.12
Adapter driver: <viamraid> HA 4
=== Scsi-Device-Map ===
CdRomPeripheral : ASUS CRW-3212A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : SONY DVD RW DRU-500A atapi Port 0 ID 1 DMA: On
DiskPeripheral : WDC WD800JD-00HKA0 atapi Port 2 ID 1 DMA: On
DiskPeripheral : ST3200822A 3.01 viamraid Port 4 ID 0 DMA: Off
CdRomPeripheral : ASUS DVD-E616P2 1.07 viamraid Port 4 ID 2 DMA: Off
=== CDRom-Device-Map ===
ASUS CRW-3212A G: CDRom1
SONY DVD RW DRU-500A I: CDRom4
ASUS DVD-E616P2 H: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523756kB)
Free physical memory: 108MB (110920kB)
Memory in use : 78 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
29.4.2005
ISO compilation
4:55:41 #1 Text 0 File Isodoc.cpp, Line 6194
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : TRUE
Write : FALSE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
4:55:41 #2 Text 0 File Reader.cpp, Line 127
Reader running
4:55:41 #3 Text 0 File Writer.cpp, Line 122
Writer SONY DVD RW DRU-500A running
4:55:41 #4 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)
4:55:41 #5 Text 0 File Burncd.cpp, Line 3153
Turn on Disc-At-Once, using DVD media
4:55:42 #6 Text 0 File DlgWaitCD.cpp, Line 260
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2234239 (496:29.64, 4363MB)
4:55:42 #7 Text 0 File DlgWaitCD.cpp, Line 272
Write in overburning mode: NO (enabled: CD)
4:55:42 #8 Text 0 File DlgWaitCD.cpp, Line 2339
Recorder: SONY DVD RW DRU-500A, Media type: DVD-R
Disc Manufacturer: NANYA- - JC001
Disc Application Code: 64, Disc Physical Code: 193
4:55:42 #9 Text 0 File DlgWaitCD.cpp, Line 438
>>> Protocol of DlgWaitCD activities: <<<
=========================================
4:55:42 #10 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2234240 (2234240) = #2234240/496:29.65
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2234240 blocks [SONY DVD RW DRU-500A]
--------------------------------------------------------------
4:55:42 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [SONY DVD RW DRU-500A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4575723520, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2234240 | lead-out | 1 | 0x41 | 0x00
4:55:42 #12 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
4:55:42 #13 Text 0 File Burncd.cpp, Line 4037
Cache writing successful.
4:55:42 #14 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
4:55:42 #15 Phase 32 File dlgbrnst.cpp, Line 1832
Simulation started at 4x (5,540 KB/s)
4:55:43 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
4:55:43 #17 Text 0 File DVDR.cpp, Line 2258
Recording mode: Sequential Recording Mode
4:55:43 #18 Text 0 File Mmc.cpp, Line 21356
Set BUFE: Power-Burn -> ON
4:55:43 #19 Text 0 File DVDR.cpp, Line 2412
Start write address at LBA 0
DVD high compatibility mode: Yes
4:55:43 #20 Text 0 File Cdrdrv.cpp, Line 8438
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
4:55:45 #21 Text 0 File Cdrdrv.cpp, Line 1288
04:55:45.109 - SONY DVD RW DRU-500A\H0 T1 : Queue again later
4:56:30 #22 Text 0 File Cdrdrv.cpp, Line 1288
04:56:30.406 - SONY DVD RW DRU-500A\H0 T1 : Queue again later
4:56:31 #23 Text 0 File Cdrdrv.cpp, Line 1288
04:56:31.375 - SONY DVD RW DRU-500A\H0 T1 : Queue again later
4:56:31 #24 Text 0 File Cdrdrv.cpp, Line 1288
04:56:31.421 - SONY DVD RW DRU-500A\H0 T1 : Queue again later
4:56:31 #25 Text 0 File Cdrdrv.cpp, Line 1288
04:56:31.500 - SONY DVD RW DRU-500A\H0 T1 : Queue again later
4:56:31 #26 Text 0 File Cdrdrv.cpp, Line 1288
04:56:31.562 - SONY DVD RW DRU-500A\H0 T1 : Queue again later
4:56:31 #27 Text 0 File Cdrdrv.cpp, Line 1288
04:56:31.640 - SONY DVD RW DRU-500A\H0 T1 : Queue again later
4:57:08 #28 Text 0 File Cdrdrv.cpp, Line 1288
04:57:08.265 - SONY DVD RW DRU-500A\H0 T1 : Queue again later
4:57:17 #29 Text 0 File Cdrdrv.cpp, Line 1288
04:57:17.437 - SONY DVD RW DRU-500A\H0 T1 : Queue again later
4:57:46 #30 Text 0 File Cdrdrv.cpp, Line 1288
04:57:46.218 - SONY DVD RW DRU-500A\H0 T1 : Queue again later
4:57:46 #31 Text 0 File Cdrdrv.cpp, Line 1288
04:57:46.296 - SONY DVD RW DRU-500A\H0 T1 : Queue again later
4:58:24 #32 Text 0 File Cdrdrv.cpp, Line 1288
04:58:24.171 - SONY DVD RW DRU-500A\H0 T1 : Queue again later
4:59:02 #33 Text 0 File Cdrdrv.cpp, Line 1288
04:59:02.093 - SONY DVD RW DRU-500A\H0 T1 : Queue again later
4:59:02 #34 Text 0 File Cdrdrv.cpp, Line 1288
04:59:02.171 - SONY DVD RW DRU-500A\H0 T1 : Queue again later
4:59:32 #35 Text 0 File Cdrdrv.cpp, Line 1288
04:59:32.031 - SONY DVD RW DRU-500A\H0 T1 : Queue again later
4:59:40 #36 Text 0 File Cdrdrv.cpp, Line 1288
04:59:40.046 - SONY DVD RW DRU-500A\H0 T1 : Queue again later
5:00:12 #37 Text 0 File Cdrdrv.cpp, Line 1288
05:00:12.703 - SONY DVD RW DRU-500A\H0 T1 : Queue again later
5:00:17 #38 Text 0 File Cdrdrv.cpp, Line 1288
05:00:17.953 - SONY DVD RW DRU-500A\H0 T1 : Queue again later
5:00:18 #39 Text 0 File Cdrdrv.cpp, Line 1288
05:00:18.031 - SONY DVD RW DRU-500A\H0 T1 : Queue again later
5:00:34 #40 Text 0 File Cdrdrv.cpp, Line 1288
05:00:34.937 - SONY DVD RW DRU-500A\H0 T1 : Queue again later
5:00:55 #41 Text 0 File Cdrdrv.cpp, Line 1288
05:00:55.359 - SONY DVD RW DRU-500A\H0 T1 : Queue again later
5:00:55 #42 Text 0 File Cdrdrv.cpp, Line 1288
05:00:55.906 - SONY DVD RW DRU-500A\H0 T1 : Queue again later
5:01:14 #43 Text 0 File Cdrdrv.cpp, Line 1288
05:01:14.796 - SONY DVD RW DRU-500A\H0 T1 : Queue again later
5:01:14 #44 SCSI -1135 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x04140000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x08
CDB Data: 0x2A 0x00 0x00 0x0B 0x74 0xC0 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0xF1 0x00 0x03 0x00 0x0B 0x6B 0xD0 0x12
0x00 0x00 0x00 0x00 0x0C 0x08
5:01:14 #45 CDR -1135 File Writer.cpp, Line 311
Write error
5:01:14 #46 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
5:01:15 #47 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
5:01:15 #48 Text 0 File DVDR.cpp, Line 2649
EndDAO: Last written address was 750783
5:01:15 #49 Phase 34 File dlgbrnst.cpp, Line 1832
Simulation failed at 4x (5,540 KB/s)
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.02.56a, size=17168 bytes, created 11/2/2004 0:02:55 (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 22:59:44 (Adapter driver for rec)
File 'Drivers\viamraid.sys': Ver=5.1.2600.430, size=60928 bytes, created 4/26/2005 11:22:40 (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
|
eSbek
Newbie
|
24. May 2005 @ 02:13 |
Link to this message
|
I had the same situatiom, but I have curred it.
(hardware: DELL Latitude 610, LG GSA 4163B DVD burner; software W2k)
First I have installed the drivers for my external enclosure (ALI M5621 chipset). Now it's not an USB device (in device manager) but the IDE ATA/ATAPI USB Storage Device.
Next I have installed the drivers for my PCMCIA USB2.0 card (drivers for the card are from OrangeWare Corporation).
The last thing (I'm not sure its necessary, but it helped me earlier with burning 90% succesfully from laptop HDD without the mentioned drivers installed), I connected the auxiliary power supply to the PCMCIA card (it has the special PS2 cabe provided).
Now I'm able to burn DVDs from intarnal HDD drive in external USB2.0 enclosure to my LG Burner installed in the external enclosure (both connected to the same PCMCIA Card!)
Before that I burnt about 40 coasters for 100 DVDs(reset occured, and sometimes burner and Nero not responding action during lead-in writing).
My solution were DRIVERS!
Ps1. It was very difficult to get the enclosure in the system as an IDE ATA/ATAPI USB storage device. After installing wrong drivers I couldn't make it like this with the proper drivers. I had always the storage device as an USB port device. Only fresh winodws intalation helped.
Ps2. My HDD drive external enclosure usues standard win2k drivers.
Check this out
|
|
ispyispy
Newbie
|
30. May 2005 @ 00:53 |
Link to this message
|
Hey there.
My quick and easy solution to the Nero "reset occurred" error is as follows. Try and see!
In Nero goto Recorder > Options > uncheck "DVD high compatibility mode" and leave everything else the same. Happy burning.
Spy
Gas, grass, ass...nobody rides for free!
|
|
Advertisement
|
|
|
Moderator
|
30. May 2005 @ 01:32 |
Link to this message
|
@yash_y2v -
Quote:
Can't be the media because I have been using this for a while now...
- most ppl who start threads like this say this, and even though there are things such as DMA to be set along the way, it still comes down to poor media. A few good burns (or many 100s of good burns on good media in my case) does not mean good films, or copyable films. See my signature for proof. Don't waste your money.
Quote:
Recorder: <SONY DVD RW DRU-500A> Version: 2.0c
- firmware 2.1A is out now dated 15th May. The firmware you have might be fairly new also, not sure though.
Quote:
CdRomPeripheral : ASUS CRW-3212A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : SONY DVD RW DRU-500A atapi Port 0 ID 1 DMA: On
DiskPeripheral : WDC WD800JD-00HKA0 atapi Port 2 ID 1 DMA: On
DiskPeripheral : ST3200822A 3.01 viamraid Port 4 ID 0 DMA: Off
CdRomPeripheral : ASUS DVD-E616P2 1.07 viamraid Port 4 ID 2 DMA: Off
- still got some stuff not in DMA. That'll drag you other devices down. Try here - http://www.dvdplusvideo.com/petesguide1.html
Quote:
Physical memory : 511MB (523756kB)
Free physical memory: 108MB (110920kB)
- you're close to running out of memory, which means that Windows will start 'swapping' ie using virtual memory, which is one of your hard discs. Plus without DMA on one or more of those discs, you're gonna get crappy burns. Coupled with no-name media....hmmmm.... Free up more memory, ie close down more background processes etc, or shutdown the internet, then virus checker etc (hope you use virus checker etc). Anyway, XP hogs mosts of your 512MB, i recently got an extra 512MB as Nero was struggling with what XP would leave of my original 512MB.
Quote:
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2234239 (496:29.64, 4363MB)
- that's saying that the disc is 'capable' of holding 4489MB. Your target size seems to be set to 4363MB (or you've only got 4363MB of data to write to this disc). If you used DVD Shrink to create this film, set the target size to say 4300MB - ie further away from the edge of the [crappy] media; if you use other software there's probably a similar setting)
Quote:
Disc Manufacturer: NANYA- - JC001
Disc Application Code: 64, Disc Physical Code: 193
- who on earth makes these discs. I bet you got these real cheap, right ?. Use brand name media or you'll be buying more good (or crap) media to replace these crappy coaster-quality things
Quote:
4:56:31 #27 Text 0 File Cdrdrv.cpp, Line 1288
04:56:31.640 - SONY DVD RW DRU-500A\H0 T1 : Queue again later
- lot's of these can't be right..
Quote:
5:01:14 #44 SCSI -1135 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x04140000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x08
CDB Data: 0x2A 0x00 0x00 0x0B 0x74 0xC0 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0xF1 0x00 0x03 0x00 0x0B 0x6B 0xD0 0x12
0x00 0x00 0x00 0x00 0x0C 0x08
5:01:14 #45 CDR -1135 File Writer.cpp, Line 311
Write error
- what can i say, this is only a simulation you're running and it just doesn't want to work due to the above problems.
Quote:
5:01:15 #49 Phase 34 File dlgbrnst.cpp, Line 1832
Simulation failed at 4x (5,540 KB/s)
- fix your DMA on those other devices or we're gonna be picking faults out of your logfile for ages!. Oh and get decent media.
Quote:
uncheck "DVD high compatibility mode" and leave everything else the same
- you can try the first half of what ispyispy suggested, ie 'uncheck high compatibility mode', but don't leave everything else the same. Otherwise you'll be back here with many more problems, as are those other ppl who use crap media and don't fix DMA and those other things i've pointed out abive.
Pls report back with your progress, if nothing else, correct info on threads hopefully serve to help other newbies..
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***This message has been edited since posting. Last time this message was edited on 30. May 2005 @ 01:54
|
|
